Database Info

Please help

Hi, I tried updating my rom using faria-htc wizard...WWE WM6 ROM and after it was complete, it said there was some error during the setup. So after doing the other steps to start the install over again, now it's telling me that I have a old updater version, and now my phone is stuck on the boot loader screen and I have no idea what to do?
If someone can please help me install the oem version or get the WM6 version that would be great!
Thanks

http://forum.xda-developers.com/showthread.php?t=298613

ok I went and downloaded the Wizard love rom but it still will not work. I can't read it but Im sure it said that it could not connect, because I am stuck in boot loader mode.
Any other advice please?
I've tried a few other roms also and all of them do the same thing

dpgmeister said:
ok I went and downloaded the Wizard love rom but it still will not work. I can't read it but Im sure it said that it could not connect, because I am stuck in boot loader mode.
Any other advice please?
I've tried a few other roms also and all of them do the same thing
Click to expand...
Click to collapse
Do you have a G3 or G4 Wizard? What is your IPL / SPL currently? If you are on the Bootloader screen (rainbow screen) then all you have to do is hook up your USB cable and flash your carrier's official rom. Activesync will NOT connect to bootloader, but it will work.

I have a G3. My IPL and SPL are both 2.25. Where can I download Cingulars ROM file from? I tried finding it but having no luck.
Thanks

Cool thanks man, I got it working again. The download section at the HTC website was finally back up

Issues with upgrading to WM6 - solved + tips

Hi guys
I know this has been asked a million times before, but trust me, I've tried following the tutorials posted her but with no luck.
So here goes:
I've tried flashing this ROM:
http://rapidshare.com/files/24185105/ruu_vario_aku3.3_3822_382120_026911_tmo_de_ger_ship.zip
via awizard but it stopped so I've unplugged it, got it into bootloader mode and flashed with the xplore WM6 ROM but it just hangs at the boot up screen after restarting.
G3 device
IPL 3.08
SP 3.08
GS 0.269.11
OS 3.8.2.2
Any ideas?

sav_za said:
Hi guys
I know this has been asked a million times before, but trust me, I've tried following the tutorials posted her but with no luck.
So here goes:
I've tried flashing this ROM:
http://rapidshare.com/files/24185105/ruu_vario_aku3.3_3822_382120_026911_tmo_de_ger_ship.zip
via awizard but it stopped so I've unplugged it, got it into bootloader mode and flashed with the xplore WM6 ROM but it just hangs at the boot up screen after restarting.
G3 device
IPL 3.08
SP 3.08
GS 0.269.11
OS 3.8.2.2
Any ideas?
Click to expand...
Click to collapse
Was your wizard CID unlocked ?
I see that you have OS 3.8.2.2 , that is not my OS. It should have been 10.2.0.8.
That means your wizard might have been locked.

Very strange.
I did run CID-unlock first. It was running xplore before I tried flashing the tmobile rom, so maybe the images didn't get flashed.
Anything I can do to fix it?

Okay, I'm busy trying to flash the wizard_love rom. Been sitting at 96% for a while lets hope it goes further.

Okay, the upgrade went through. OS2.26
XDS-dev tutorials and the love rom for the win! Now I can relax again...
Will flash to WM6 soon.

sav_za said:
Okay, the upgrade went through. OS2.26
XDS-dev tutorials and the love rom for the win! Now I can relax again...
Will flash to WM6 soon.
Click to expand...
Click to collapse
Heh. So now that you have found the tutorials helpful, perhaps you'd consider changing the thread title?
--M

Sorry about that, have changed it.
For some reason I can't get it back to WM6 but will try again and keep you guys posted. Device is definitely CID unlocked, but for some reason it keeps hanging at the boot screen.

OKay, assuming my wizard got CID-locked for some reason, how do I downgrade to ver1 to unlock it again?
I've downloaded button's ver1.05 rom. Can I just install it, or will it give me an error saying I need a newer ROM?
Sorry for all the questions, I just don't want to take any chances.

sav_za said:
OKay, assuming my wizard got CID-locked for some reason, how do I downgrade to ver1 to unlock it again?
I've downloaded button's ver1.05 rom. Can I just install it, or will it give me an error saying I need a newer ROM?
Sorry for all the questions, I just don't want to take any chances.
Click to expand...
Click to collapse
Luke....use the Force... Follow the steps in the tutorial link (in my sig.) but the short answer is "yes".
--M

Hehe, thanks I've done that. Will try tomorrow, thanks.
I feel like a bit of a plonker asking so many questions with such obvious answers.

Okay, after a LOT of trial & error I've finally gotten it back to WM6. Here's what I did:
1)Downgraded to IPL/SPL 1.01 using button's ROM
2)CID unlocked using lokiwiz
3)Upgraded to mr_clean AKU2.3
4)Upgraded to Faria's WM6
I didn't use aWizard as usual, just the rom upgrade utilities that came with these ROMS.
Hope this helps anyone that's struggling with the same problems I've been having.
Thanks for the tutorials, they've been a great help. The only part that didn't work for me was upgrading to T-mobile's 2.26 because it would freeze on the bootup screen after upgrading to WM6. Replace that step with mr_clean 2.3 and it works fine.

hey how did you get your wizard_love rom to get past 96% without crashing? mine just gives me error 302, which is  ERROR [302~318] : UPDATE ERROR
any clue? thanks

mapleman321 said:
hey how did you get your wizard_love rom to get past 96% without crashing? mine just gives me error 302, which is ? ERROR [302~318] : UPDATE ERROR
any clue? thanks
Click to expand...
Click to collapse
Hi
I got the phone into bootloader mode then it worked fine. It got stuck at 94% iirc but I just left it until it finished.
Hope this helps

AT&T Tilt blank screen after Kaiser Sim Unlocker!

The screen remains black, blank, and does not light up, even though activesync knows the device has booted because the icon becomes green. I can't navigate any controls, though the keys do light up when I slide it, or press buttons. Screen remains blank/black.
Here is what I did to get to this state:
1) I first hard reset my Kaiser, to reset all user preferences. This I accouplished by pressing both soft keys while pressing power (if I recall correctly), then hitting the green call button. It then installed Windows Mobile fresh.
2) I then followed the HardSPL instructions, here:
http://forum.xda-developers.com/showthread.php?t=361236
Everything went fine.
3) I then followed the Kaiser Sim Unlocker instructions here:
http://forum.xda-developers.com/showthread.php?t=361039
After completing step 5, the device rebooted, the AT&T icon displayed, then the screen goes blank and stays that way.
What should I do? Did I miss something? Is this recoverable?

It also does not have any sound. Does this mean I can't unlock?
How do I flash back to the original rom?

Ok, looks like have version 1.27.12.11 rom, during boot.... according to this page it isn't ok for my AT&T Tilt device.
http://forum.xda-developers.com/showthread.php?t=393182
So does this mean I have to pay to unlock? Or is there some way to do it still? Thanks.

NetTechie said:
Ok, looks like have version 1.27.12.11 rom, during boot.... according to this page it isn't ok for my AT&T Tilt device.
http://forum.xda-developers.com/showthread.php?t=393182
So does this mean I have to pay to unlock? Or is there some way to do it still? Thanks.
Click to expand...
Click to collapse
Try flashing this radio.
http://www.4shared.com/file/36681926/36b4832d/KAIS_Radio_Only_1271211_CustomRUU.html
I guess you didn't read step 10

I have a problem... it wont go green now, I can't get activesync to go green. I wont be able to load the rom... what can I do?
[ EDIT ]
A reboot fixed this *sigh of releif*. Goes green now.

AllTheWay said:
Try flashing this radio.
http://www.4shared.com/file/36681926/36b4832d/KAIS_Radio_Only_1271211_CustomRUU.html
I guess you didn't read step 10
Click to expand...
Click to collapse
Ok, question: Will I use the file in Step 3 to put that on the phone? It is saying there is a file open...? I can't disable USB on the device, as the screen is blank.
[EDIT] Looks like everything I needed was in the download. I put the other ROM back on. However, I'm having a problem with activesync... When I click on Connection Settings active sync freezes up. Any ideas what to do to fix ActiveSync so I can turn off USB, without crashing ActiveSync?

Okay, I got the screen with the unlock code... only it gave me this readout:
Your Unlockcode = ........
just like that, with dots.
Is there any way to unlock a phone, if the screen goes black? I can go back to the old firmware, but this special firmware is needed I think to do the unlock, and this special firmware makes the screen go black on my model.
EDIT: On page 33 of the Kaiser unlocker topic, I found what looks like my answer. I need the AT&T 1.57 ROM, as it is compatible with this patched radio so the display will work. Unfortunately, I haven't been able to find it on this forum yet. EDIT 2: Found it, loading it on now: http://www.4shared.com/file/3857459...ULAR_WWE_157_-_Originaly_Shipped_ATT_ROM.html

Unlock worked, once I had the AT&T 1.57 version of the ROM on there. ActiveSync still freezes, but I uninstalled it for the section where I was supposed to disable USB. Installed the 1.27.12.11 radio after completing the unlock, replacing the patched radio. All finished.

Mine still showsup Blank screen
Hi,
I followed the same steps as yours :
Firstly I reset my Kaiser & then followed the HardSPL instructions, here:
http://forum.xda-developers.com/showthread.php?t=361236
Everything went fine.
I then followed the Kaiser Sim Unlocker instructions here:
http://forum.xda-developers.com/showthread.php?t=361039
After completing step 5, the device rebooted, the AT&T icon displayed, then the screen goes blank and stays that way
Now I tried flashing
http://www.4shared.com/file/36681926...CustomRUU.html
But it didnot help (
Can you please tell me what I should be doing next..

vrramakanth said:
But it didnot help (
Can you please tell me what I should be doing next..
Click to expand...
Click to collapse
what do you mean when you say it "didn't help"?

I still get the blank screen..I am now downloading the AT&T 1.57 version .. I am hoping if I install this I will get the display and I can proceed to step 8a, 8b,..

Sorry to be short,
But did you even bother reading through the other threads with the exact same problem as you?
the problem you have is that you flashed an incompatible radio with the ROM that you are runing on the phone. You need to reflash the ROM with a rom that is compatible with the radio or reflash the radio rom to what came with the phone rom that you are running.
You should have upgraded to a 6.1 cooked rom prior to doing the SIM/CID unlock.
Flash your phone with a cooked 6.1 rom that INCLUDES the radio, and then try the CID/SIM unlocker.
my two bit.

I am trying with http://www.4shared.com/file/38574592...d_ATT_ROM.html, which is the ROM that comes with this phone. Do u think this helps? Do u want me to flash 6.1 ROM instead of this?

No,
Unless you know the stock ROM comes with a compatible radio, it will not work. The problem you are having is because you loaded a radio that is not compatible with the stock rom.
If you already have hardspl loaded, then load a cooked 6.1 ROM that includes a compatible radio (for example L26 v9 rom or Sleuth 3.0 rom).

ok..am a BIG novice here..may be a bad question..I have Windows 6.0 on the mobile..so the Cooked 6.1 ROM L26 that I found http://forum.ppcgeeks.com/showthread.php?t=26925 fits into this? Do I need to upgrade to 6.1 before this? sorry if its a wrong question ..

vrramakanth said:
ok..am a BIG novice here..may be a bad question..I have Windows 6.0 on the mobile..so the Cooked 6.1 ROM L26 that I found http://forum.ppcgeeks.com/showthread.php?t=26925 fits into this? Do I need to upgrade to 6.1 before this? sorry if its a wrong question ..
Click to expand...
Click to collapse
It's not a wrong question
1. Yes, that fits in
2. No, you do not need to upgrade to 6.1 before this, flashing the ROM will take care of it
hope this helps

Thanks mbarvian!!
So I am Installing the upgrade to 6.1 ROM, but do I still need to install the correct AT&T ROM that you gave me in the other thread http://forum.xda-developers.com/showthread.php?p=2452022#post2452022?
Thanks!!

Alibaba0101 said:
No,
Unless you know the stock ROM comes with a compatible radio, it will not work. The problem you are having is because you loaded a radio that is not compatible with the stock rom.
If you already have hardspl loaded, then load a cooked 6.1 ROM that includes a compatible radio (for example L26 v9 rom or Sleuth 3.0 rom).
Click to expand...
Click to collapse
I now installed a 6.1 ROM..now do I need to downgrade to be able to do SIM unlock?
From http://forum.xda-developers.com/showthread.php?t=361039 it says :
Note for WM6.1 users
================
Do not try this on 6.1! You will need to downgrade to 6.0
Click to expand...
Click to collapse

vrramakanth said:
I now installed a 6.1 ROM..now do I need to downgrade to be able to do SIM unlock?
From http://forum.xda-developers.com/showthread.php?t=361039 it says :
Click to expand...
Click to collapse
Yes, now you would want to download and flash the ROM I gave you in the other thread
here's the link:
http://rapidshare.com/files/55298724/RUU_Kaiser_CINGULAR_WWE_.exe

I am trying with http://www.4shared.com/file/38574592...d_ATT_ROM.html is this fine??

Help for reverting back to origianl rom! Urgent!!!

first of all sorry for y English...
Ive been read the threads about that, but ive this problem:
i ve a hardspl 3.29 and trying to downgrade to original rom the flashing process stops at 15%.
i can install only custom rom and so i cant reverting back to original rom and spl.
ive been tried to flash first the spl but not working...
someone can help me please?
thx!!

wow, I don't think I've ever haleard it this way before. Usually you can't upgrade to a cooked ROM, not the other way around.
So, you get no errors while installing a cooked ROM, but it stops at 15% when trying to downgrade...
I know that some shipped ROMs flash the SPL at 15%, so this must be the problem.
Undortunately, I am a lucky one who has never had anything bad happen to me while flashing (besides my laptop running out of battery), so I don't really have much advice to give you, but I'm sure somebody else will.
Sorry, hope it all goes well for you

HardSPL prevents itself from being replaced. You need to run JumpSPL or SSPL-KAIS on the phone when it is running WM as normal, which will switch you to triciolor screen, where you can flash the original SPL.
This should be detailed in the "How to revert to factory state" page in the wiki.

thx but ive been done all and now my kaiser it's brick on bootloader:
dont allow to flash hard spl
dont allow to flash custom rom
dont allow to flsh original rom
Help PLease!!!!!!!
tried with mtty but nothing...USB PORT CAN NOT OPEN

Try that sticky thread? http://forum.xda-developers.com/showthread.php?t=423486

kilrah said:
Try that sticky thread? http://forum.xda-developers.com/showthread.php?t=423486
Click to expand...
Click to collapse
tried but no chance...

my suggestion is to search this forum for "stuck in bootloader"
you're sure to find something there

mbarvian said:
my suggestion is to search this forum for "stuck in bootloader"
you're sure to find something there
Click to expand...
Click to collapse
now...
solved the stuck problem on bootloaderwith mtty for Vista, but with hardspl it's impossible to flash an original rom on the device (flsh stops at 15% error 226-flash error- wath is?)
so...i want to flash an original rom: waht can i do? help needed please...thx!!!

always prpblem in falshing original update...flashing process stops at 15%. ive downgraded at wm6 with spl 3.07.
ERROR 226

Help...Stuck on Boot screen

I have an old Prophet that refuses to boot to the Operating system. I see the Orange Logo screen with:
IPL 2.20.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.10.1.22
I don't know if (a long time ago) I flashed a G3 phone with a G4 rom or what (would this be the result????).
I have also tried flashing all sorts of ROMs found on this site and even gone onto WIN 6 but it always halts the booting at this screen...
Can anyone help before this phone ends up in the bin!!!!!!!!!!!!!!

First you must flashed an WM5 Rom. Search for Qtek hier and read so many treads about this prob.

Thanks 4 the reply... I will have a go and see what happens.

I have now re-flashed a Qtec rom and still stuck on the boot screen with...
IPL 2.20.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.20.7.34
Is there anyone out there with any idea how to get this phone back from the dead ??????

You have read the wiki ?
http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
You have download and flashed the qtek rom from this side ?
I don`t mean you do that.

NEO130 said:
You have read the wiki ?
http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
You have download and flashed the qtek rom from this side ?
I don`t mean you do that.
Click to expand...
Click to collapse
I have followed the instructions on this site to recover my M600 but it STILL refuses to boot up....
I have tried various ROMs ect to no avail............
Can anyone out there resolve this ?????

Don`t cry like a little girl. What rom exactly have you flashed now ?
http://wiki.xda-developers.com/index.php?pagename=Prophet_ROMs
Are your battery over 50 % to flash ?

Battery is fully charged and the last ROM flashed was:
RUU_Prophet_220734_2207114_024721_NVID.exe
I have also tried this one:
Original-Shipped-ROMs/OrangeUK/Prophet_Orange_UK_ROM.zip
They both have the same result.

You start your phone - bring it in the bootloader modus -connect to pc - flashed the qtec rom you have - If this doesn`t go, I am on the end to help, and you are the first guy it doesn`t go. Sorry
P.S. Dissable Active Sync - Flash only with XP, no VISTA. No USB Hub - If you connect the device you must see in the left down corner USB and than flash

NEO130 said:
You start your phone - bring it in the bootloader modus -connect to pc - flashed the qtec rom you have - If this doesn`t go, I am on the end to help, and you are the first guy it doesn`t go. Sorry
P.S. Dissable Active Sync - Flash only with XP, no VISTA. No USB Hub - If you connect the device you must see in the left down corner USB and than flash
Click to expand...
Click to collapse
NEO.. I have done this and it will still not boot, maybe it's a hardware problem and it is well and truly "bricked"...
Thanks for your help and replies..... I will keep trying...

I had a similar Problem, have you tried a other ROM without IPL/SPL
xtrafletch said:
NEO.. I have done this and it will still not boot, maybe it's a hardware problem and it is well and truly "bricked"...
Thanks for your help and replies..... I will keep trying...
Click to expand...
Click to collapse
Hello there,
I think I had a similar Problem, once I flashed some signed roms via
softspl (Neo Shadow 1.0), everything went okay till then.
I forgot the missing HardSPL on one of my Prophets and
Flashed with RUU Bikertibis 6.5 23007 wich worked fine
after flashing. Even with no hardspl it worked till flashing
the next rom...bricked.
Stucking in bootloader and even the Shiped WWE Rom with NVID
was not working. Stucking in the 3 color screen.
My Prophet was sold as TC-500 from german telekom,
so it had spl 2.56.001 wich only allowed Roms signet
by the vendor, also the NVID Rom you tried didn't worked.
but i kept trying and flashed RUU_Prophet_220739_2207119_021921_QTEK_GER_Ship_NO_IPL_SPL.exe
don't know why, but it booted up with this rom.
After this i made a HardSPL and everthing is fine now.
if i read correct you have SPL 2.20.0001 so use G4 RUU.
Try flashing on XP X68! It's easier this way.
I use XP64 wich works to. disable powersaving
and everthing else what could interfer flashing.
good luck !