i have been update my s200 to wm6 - JAMin, XDA Neo, S200 Software Upgrading

hello fox
i try to update my s200 to wm6 but i think i did some thing woring i dont know what ,,, but when i start the s200 i just come scren with close i dont know what i can do to fix it
any one help and told me what is the right Rom to s200 and i how i can fix my s200
thanks for help

tryed an hard reset?
which rom did you try to install and which model phone do you have, G3 or G4

Supr said:
tryed an hard reset?
which rom did you try to install and which model phone do you have, G3 or G4
Click to expand...
Click to collapse
thank you fOR ur answe
i am sorry to ask about that but realy am new in this
i try to install wm6 that i download from here ...
and realy i dont know what is rom I Try
my mobile is QTCK S200 !!!
how i can rest hard
´Thank U

first off have to ask what is your native tongue? i can use a translater to convert to english then my answer back. anyway
to hard reset press the camara button and the comm botton together and press and release the reset. keep holding the bottons until a black screen pops up and tells you to press the green phone botton(send)
you just hard reset the phone
after you do that if that doesnt work then what you need to do is flash with the qtek nvid rom if you need i can find the links to the rom to download.
press the camara button and then press the reset holding the camara button until the 3 color screen pops up. plug in the usb cable and reflash to that rom.
let it boot and make sure its usable. then upgrade to the rom of your choice. BTW what phone do you have? g3 or g4?

pen25 said:
first off have to ask what is your native tongue? i can use a translater to convert to english then my answer back. anyway
to hard reset press the camara button and the comm botton together and press and release the reset. keep holding the bottons until a black screen pops up and tells you to press the green phone botton(send)
you just hard reset the phone
after you do that if that doesnt work then what you need to do is flash with the qtek nvid rom if you need i can find the links to the rom to download.
press the camara button and then press the reset holding the camara button until the 3 color screen pops up. plug in the usb cable and reflash to that rom.
let it boot and make sure its usable. then upgrade to the rom of your choice. BTW what phone do you have? g3 or g4?
Click to expand...
Click to collapse
i try to hard rest like what u siad but is not working i dont know why mybe i need qtek nvid rom like what u said and realy i dont know what u mean by g4 and g3 ...
i have qtek s200 was working with normal sim card GMS NOT 3G
That all what i know !!!!
Thank for ur help

europsweden said:
i try to hard rest like what u siad but is not working i dont know why mybe i need qtek nvid rom like what u said and realy i dont know what u mean by g4 and g3 ...
i have qtek s200 was working with normal sim card GMS NOT 3G
That all what i know !!!!
Thank for ur help
Click to expand...
Click to collapse
when you boot it will list a series of #'s. please write them down.
ipl 1.00
spl 2.20.0000
gsm 02.47.21
os 10.2.0.8
that is what mine is. if your spl is 2.20.0000 the 0000 is g3 0001 is g4

Thank you for ur answer and help sir
when i try to open the Qtek s200 i just come screan with red and bule color
in left side Secran there is
ipl 2,10
spl 2,10
and in the right side UP There is RUU
THAT IS ALL

europsweden said:
Thank you for ur answer and help sir
when i try to open the Qtek s200 i just come screan with red and bule color
in left side Secran there is
ipl 2,10
spl 2,10
and in the right side UP There is RUU
THAT IS ALL
Click to expand...
Click to collapse
ok you upgraded the ipl and spl. there is a thread that talks about that let me find it and ill post the link to it that will explain how to fix this issue.
http://forum.xda-developers.com/showthread.php?t=307958
http://forum.xda-developers.com/showthread.php?t=307664
read both. hope this helps.

Thank u man for ur answer
where i can find this file
RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_ Ship.exe

via google?

europsweden said:
Thank u man for ur answer
where i can find this file
RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_ Ship.exe
Click to expand...
Click to collapse
yes i would suggest searching google. you will find several links. ntrunner can yuo confirm this will work for both g3 and g4? how would he find out if hes using a g3 or g4?

hello i dont find anytthink in google !!!
any links from here ___

im uploading the rom i used to downgrade mine back to 2.2
http://rapidshare.com/files/32855625/RUU_Prophet_220734_2207114_024721_NVID_QTEK.exe
again understand my prophet is a g3 so you need to make sure you dont have a g4 or until someone confirms this will work for either or.

pen25 said:
im uploading the rom i used to downgrade mine back to 2.2
http://rapidshare.com/files/32855625/RUU_Prophet_220734_2207114_024721_NVID_QTEK.exe
again understand my prophet is a g3 so you need to make sure you dont have a g4 or until someone confirms this will work for either or.
Click to expand...
Click to collapse
pen25
thanks u man for ur help
when i try to flash my Qtek s200 i start normal then we its come to 80% the color for upload change to read then its STOP !!11 I DONT KNOW WHAT IS THE FELLL!!!
Thank for ur help sir

europsweden said:
pen25
thanks u man for ur help
when i try to flash my Qtek s200 i start normal then we its come to 80% the color for upload change to read then its STOP !!11 I DONT KNOW WHAT IS THE FELLL!!!
Thank for ur help sir
Click to expand...
Click to collapse
i think there might be an issue with your phone version. you may need a flash for the g4. on the spl what is the complete #? you should have x.xx.xxxx in your case it should be 2.10.xxxx what is the last 4 digits? is it 0000 or 0001?

pen25 said:
i think there might be an issue with your phone version. you may need a flash for the g4. on the spl what is the complete #? you should have x.xx.xxxx in your case it should be 2.10.xxxx what is the last 4 digits? is it 0000 or 0001?
Click to expand...
Click to collapse
its 000000

europsweden said:
its 000000
Click to expand...
Click to collapse
ok. hard reset the device again. then remove the battery for a couple min. then flash with the nvid rom. follow the directions completely. hope that gets it going. if it doesnt then hopefully someone more experianced will help out.

What OS on your computer are you running?

Supr said:
What OS on your computer are you running?
Click to expand...
Click to collapse
i Run Windows Xp p SP2
i dont know why i stop when i get to 80% !!!
any one have answer plz

europsweden said:
i Run Windows Xp p SP2
i dont know why i stop when i get to 80% !!!
any one have answer plz
Click to expand...
Click to collapse
Just have some more patience! It is well known that flashing stops for a while at 80, 85, 95% and after a few minutes starts again and finish. Just give it some time!!

Related

HELP!! Cant use my Wizard anymore

Hi guys i'm pretty new in this scene and i did something stupid...
i've downloaded Win Mobile 6 from usenet and installed it without reading
anything. At 95% of the installation it hangs and when i try to recover it doesnt work. Now i only have the screen with the green red and blue at the background. I've tried a hard reset but that doesnt work either and i tried to search by google and found nothing.
Am i right that i had to remove some kind of G4 lock? And does somebody know how to help me getting things started again.....
thnx in advance.
greetz
JohnGotti
do your carriers flash and let it fully finish. Once thats done, read a little on making sure your device is unlocked and once you get that done, youll be ready to move to the next level.
what your device is g3 or g4?
how do i perform such a flash and how can i see what kind of G3/4 i have??
If you got a G4 or G3 IPL/SPL 2.x:
Try flasing wizard_love rom from the bootloader screen.
If you got IPL/SPL 1.x:
flash button_rom from the bootloader screen.
damn thats a whole mouth full and i dont get it how its intended.....
perhaps you can tell me in dutch or in a language a stupid fool can understand
JohnGotti said:
damn thats a whole mouth full and i dont get it how its intended.....
perhaps you can tell me in dutch or in a language a stupid fool can understand
Click to expand...
Click to collapse
See you're private messages!
ok thank you
i have the same problem..and i've tried all versions,RUU_mUn_aRTM_10_2_0_8_WWEx.exe, Wizard_Love_2[1].26.10.2_WWE_Novii_CF2.exe, Molski[1].Biz_AKU3.3_21911_8MB_Crossbow.rar...and now when i open it, shows me for 1 second the bootloader screen, and then it's shutting down himself..what should I do???
ady_uaic said:
i have the same problem..and i've tried all versions,RUU_mUn_aRTM_10_2_0_8_WWEx.exe, Wizard_Love_2[1].26.10.2_WWE_Novii_CF2.exe, Molski[1].Biz_AKU3.3_21911_8MB_Crossbow.rar...and now when i open it, shows me for 1 second the bootloader screen, and then it's shutting down himself..what should I do???
Click to expand...
Click to collapse
You should provide more information... What phone model is this? Is it a G3 or G4? What is your IPL / SPL? What did you do before this started happening? Was the battery fully charged before you started this process? Did your PC give you errors when you tried to do teh initial flash that started this process?
The more information you provide the better we can help.
If your phone won't stay turned on when its on the bootloader (rainbow screen) then either your battery is almost dead, or you may have bricked your phone. But we need more details.
this happened to me once, i almost had an heart attack.. but anyway.. what u get there is the bootloader mode, which is you can still save the phone.. when this happened to me, all i did was, i upgraded to original tmobile rom, and from there i ve used shell tool to upgrade to wm6 (my wizard is not unlocked but shelltool takes care of that and u dont have to worry).. its really easy.. let me know what happened.. no worries
Dont worry guys... I think most of us here, faced the same things before, Me included.
Everybody here is quite nice and will help u in any way we can..
Just do some research and fact finding before u flash your rom..
One of the article that I think is very helpful to me is Dr P post on how to unlock and flash your wizard.
If you have any problem or question after reading that, just ask.
Hopefully u can find your answer and your wizard are all healthy..
mfrazzz said:
You should provide more information... What phone model is this? Is it a G3 or G4? What is your IPL / SPL? What did you do before this started happening? Was the battery fully charged before you started this process? Did your PC give you errors when you tried to do teh initial flash that started this process?
The more information you provide the better we can help.
If your phone won't stay turned on when its on the bootloader (rainbow screen) then either your battery is almost dead, or you may have bricked your phone. But we need more details.
Click to expand...
Click to collapse
my phone is G4...first, when i tryed to change the rom, on 95% was blocked..and i have wait about 20 minutes, and nothing...the spl is....01...the battery was quite full, but after several tries, i don't know now how it is (i supose to be from the battery, but i still need a very good rom for it)
ok.. here are the steps.. its very easy.. i had the samething..
your phone is probably CID locked and you will need a shelltool to install that ROM.. so what you need to do is just download the original tmobile ROM.. and connect the phone and install the original ROM.. You didnt birck the phone because you get the bootloader screen.. which means, you can still save the phone..
anyway.. connect the phone via usb and install after you install the original wm5, download the shelltool from here and follow the instructions.. and install the ROM via shelltool.. Then you should be good to go with the new
wm6.
http://forum.xda-developers.com/show...ght=CID+unlock
ok, but where can i get that original rom?
rom
ady_uaic said:
ok, but where can i get that original rom?
Click to expand...
Click to collapse
if you cant get the tmobile rom
use the wizard love rom you can get it from here http://rapidshare.com/users/EXGZ7T
flash this rom not using the shell tool once flashed the use the shell tool following all the instructions and it should work
now i've installed RUU_mUn_aRTM_10_2_0_8_WWEx.exe (i've tried and that version also, but same situation) and after reflashing, it shows me windows mobile screen, and then restart the phone...what should I do??? i've tried many roms...could someone please give me an original rom, in english?
ady_uaic said:
now i've installed RUU_mUn_aRTM_10_2_0_8_WWEx.exe (i've tried and that version also, but same situation) and after reflashing, it shows me windows mobile screen, and then restart the phone...what should I do??? i've tried many roms...could someone please give me an original rom, in english?
Click to expand...
Click to collapse
Simple: Go to the Wizard Upgrading forum and in the stickies is a post by Dr. Putingham on how to CID Unlock your device. Scroll to the bottom of the first post and there is a direct link to pull the Tmobile 2.26 official ROM.
But as EasyMob suggested (and gave a link to) you may be better off with teh Wizard Love rom since you are a G4 device. Wizard Love ROM is very good at recovering G4 devices.
mfrazzz said:
Simple: Go to the Wizard Upgrading forum and in the stickies is a post by Dr. Putingham on how to CID Unlock your device. Scroll to the bottom of the first post and there is a direct link to pull the Tmobile 2.26 official ROM.
But as EasyMob suggested (and gave a link to) you may be better off with teh Wizard Love rom since you are a G4 device. Wizard Love ROM is very good at recovering G4 devices.
Click to expand...
Click to collapse
OK..I'm agree with you, but please understand: I've tried that version too...same situation...please give me the link with the Tmobile 2.26 official ROM
ady_uaic said:
please give me the link with the Tmobile 2.26 official ROM
Click to expand...
Click to collapse
If you read my previous post, I gave you exactly how to find the link (Hint, its in the first post of Dr. Putingham's sticky in the Wizard Upgrading forum and the title is about How to CID Unlock your device. Was that too hard?
i believe you, but i can't find it...and about 3 days i'm hopeless, because with any ROM version, the phone is still restarting, after reflashing (i didn't flash it with tmobile original rom)...please please, give me the link of the topic...

SSPL, USPL Another way to flash *ANY* rom to your device!

Hi all...!
We are working in SSPL and USPL for Pharos device.With them u can Flash any Rom in your device.
And we will release in this thread as soon as possible
cheers..!
GREAT!
we are wait for it!
p.s i'm ready to be a beta-tester
p.s.s do you have WWE rom?
Syrop said:
GREAT!
we are wait for it!
p.s i'm ready to be a beta-tester
p.s.s do you have WWE rom?
Click to expand...
Click to collapse
when uspl, hard spl release.Not only WWE rom.WM6.1 with other languages in plan too
good!
i made russian wm6.1, but can't flash
i wonder why how it's work. wait for release.
Waiting for you
Waiting for you, tom.
Thank you very much!!!
great! thnx for the good work! I'd like a wwe6.1 rom (or dutch)
Will follow up with your great work.
Refuel!Refuel!Refuel! Support
七月流火 said:
Refuel!Refuel!Refuel! Support
Click to expand...
Click to collapse
euuhmmm ?? what??!!??
Any news about the WM6.1 ROM?? I hope in an Italian version
Hey tom waiting for your Rom.......
Ok,
Now another problem.
I managed to upgrade my rom. But after doing so i replace my backup and now it boots but stops in the HTC screen.
I can start it back into bootloader mode, but I cannot reflash it because of the invalid vendor ID error.
How can I fix this ?
or does anyone have the standard Dutch Rom ?
thx in advance..
Same problem here.
Screen with HTC logo freeze and can't flash cause usb connection is lost.
Problem solved.
Do hard reset and fresh Windows screen apprear
wikki said:
Problem solved.
Do hard reset and fresh Windows screen apprear
Click to expand...
Click to collapse
I did a Hard reset by keycombination....
Prob Solved as well
My Pharos is dead. after I Flash rom
After reboot it show htc logo and turn to white screen with a short sound
I can't anything after that
The sync is lost
I hard reset but everything the same
help me a.s.a.p
please
this is rom that i use
htc Pharos (3470) Official ROM 1.11.707.1 from ruchonburi
กระทู้ SSPL & USPL htc 3470 (Pharos)
DIY-1.11-1.0
http://www.pdamobiz.com/show_news.asp?NewsID=144757&PN=1
Thank
[email protected]
thiwat said:
My Pharos is dead. after I Flash rom
After reboot it show htc logo and turn to white screen with a short sound
I can't anything after that
The sync is lost
I hard reset but everything the same
help me a.s.a.p
please
this is rom that i use
htc Pharos (3470) Official ROM 1.11.707.1 from ruchonburi
กระทู้ SSPL & USPL htc 3470 (Pharos)
DIY-1.11-1.0
http://www.pdamobiz.com/show_news.asp?NewsID=144757&PN=1
Thank
[email protected]
Click to expand...
Click to collapse
try this:
turn off the phone, press and hold camera button + green button + power button until bootloader screen appears. At this point plug the usb cable and try to flash official WWE ROM...
Cross the fingers and wait..
bye

stock on 0% flasahing rom

hello everybody
i started to flash a new rom
Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid V2_1_65.14.06[No_CubeV2]
and i think i followd all the instractions but after starting the flashing it stock on 17% after removing the battery as the program said it wont go over 0%
firs i installed kaiser-HardSPLv1 and after that i started to flash the rom and its not working.
pls tell me what to do to save my nice phone
dannt
speebman said:
hello everybody
i started to flash a new rom
Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid V2_1_65.14.06[No_CubeV2]
and i think i followd all the instractions but after starting the flashing it stock on 17% after removing the battery as the program said it wont go over 0%
firs i installed kaiser-HardSPLv1 and after that i started to flash the rom and its not working.
pls tell me what to do to save my nice phone
dannt
Click to expand...
Click to collapse
"think" you followed all the directions?
sorry for my bad english or leak of knolge in this part of the world i just read so much regarding this subject ant the more i read the more i got confused
so i just sow the first logical faq and followd him, plz i need my phone all my life is in their, help me.
danny
speebman said:
hello everybody
i started to flash a new rom
Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid V2_1_65.14.06[No_CubeV2]
and i think i followd all the instractions but after starting the flashing it stock on 17% after removing the battery as the program said it wont go over 0%
firs i installed kaiser-HardSPLv1 and after that i started to flash the rom and its not working.
pls tell me what to do to save my nice phone
dannt
Click to expand...
Click to collapse
Things that will help others help you:
1. where are you located?
2. who is your provider
3. what ROM WERE you on?
4. ok - you had a phone that was working - and you did:
a. what did you do first?
b. second?
c. etc.
Your message KINDA indicates that you flashed a ROM and had issues - so you THEN flash HARDSPL? was that successful?
Bill
im from israel but my phone is from uk i think, my original rom was the HTC 6.1
i just run the kaiser-HardSPLv1 program and then i started flashing the rom duty 6.1 rom and it stoped at 17% like the program said i removed the batery and started the flashing prosse again but now it doesny even go above 0%, now im stock in the tri color screan
its writen
kais130
spl-3.28.0000
cpld-8
and usb in the littel whait screan
speebman said:
im from israel but my phone is from uk i think, my original rom was the HTC 6.1
i just run the kaiser-HardSPLv1 program and then i started flashing the rom duty 6.1 rom and it stoped at 17% like the program said i removed the batery and started the flashing prosse again but now it doesny even go above 0%, now im stock in the tri color screan
its writen
kais130
spl-3.28.0000
cpld-8
and usb in the littel whait screan
Click to expand...
Click to collapse
you don't have hardSPL installed..! surprise, surprise
u don't have hardspl flashed from bootloader info u provided. flash hardspl be4 flashing any roms.
please search and read; this has been answered many times.
p.s. use the new hardspl by jocky which is a sticky in this forum.
speebman said:
im from israel but my phone is from uk i think, my original rom was the HTC 6.1
i just run the kaiser-HardSPLv1 program and then i started flashing the rom duty 6.1 rom and it stoped at 17% like the program said i removed the batery and started the flashing prosse again but now it doesny even go above 0%, now im stock in the tri color screan
its writen
kais130
spl-3.28.0000
cpld-8
and usb in the littel whait screan
Click to expand...
Click to collapse
OK - I do not think that you got the HARDSPL installed on your phone correctly - BECAUSE - I believe that it would say OLIPOF or JOCKY on it and it does not.
I have not seen the new HARDSPL 328 and 329 but it LOOKS like to me that you did not successfully get the HARDSPL on your phone.
Personally - I would scan the message boards for GSLEON3 (user name) and send him a private message - there are many others that can help you and he or others MAY come trolling by and take pity on you - but at the moment he is the one that helps people in your situation the most from what I have seen.
I would NOT continue to work on it myself as you can definitely mess your phone up permanently. Does your phone still go into boot loader mode? If so - can you flash the required HARDSPL onto your phone?
Find a message that GSLEON3 has left and then lik on his name and send him a private message - he is very nice - BUT - he is VERY busy - continue to be nice and he will most likely get you back and running.
Bill
first of all thank u for the help
but, wich one i need? 28 or 29?
and how do i do this spl if i cant copy them to my device.
danny
speebman said:
first of all thank u for the help
but, wich one i need? 28 or 29?
and how do i do this spl if i cant copy them to my device.
danny
Click to expand...
Click to collapse
Danny -
Deep cleansing breaths here ok?
1. personally - I would PUT BACK what ever you had on your phone and get it running again - trying at this point to get ot to go to a different ROM is not a good idea right at this minute.
2. 28 and 29 from what I read makes no difference - users try each one to see which one works better on THEIR flashed ROM.
3. What I would do is look for the HARDSPL that goes with what you had loaded to begin with - or the actual SPL that came with your original ROM and put that one back.
I would be stuck here because I have to use JUMPSPL on my phone because I get the white screen - but I THINK that (don't quote me because I do not do it this way) if you don't get the white screen you can just flash the HARDSPL to your phone without JUMPSPL (having to be able to copy something to your phone.
HOWEVER - if you cannot or do not know how to continue from reading the WIKI - you MUST request help from a professional - I have already recommended one. (GSLEON3)
Bill
my active sink is not seeing the devais, maby MTTY? wil help
speebman said:
my active sink is not seeing the devais, maby MTTY? wil help
Click to expand...
Click to collapse
Based on your current track record, I wouldn't suggest you use MTTY as you have a VERY HIGH probability of bricking your phone (ie: it won't ever be usable again).
so im fu--.
Can you get the phone into the bootloader mode? Turn the phone off (pull the battery if you have to) then press and hold the camera button while you turn the phone on. You should get to a tri-color screen (this is the boot loader). Now plug in the USB cord and see if it switches from saying Serial to USB. If so, you can try flashing AN OFFICIAL ROM THAT WAS MEANT FOR YOUR PHONE (ie: Don't try to put an offical AT&T rom on an Orange). When you run the RUU program it will tell you that you need to have ActiveSync working, but don't worry about that. If your phone in bootloader shows USB, you can continue on.
BUT AGAIN... You need the Official rom that was meant for your device. Since you are not HardSPL'd you have to do it this way.
If you don't understand any of that, or have questions, don't just try it hoping you get it right...
As stated previously, it would be well worth you time to get someone like GSLEON to assist if you can.
mfrazzz said:
Can you get the phone into the bootloader mode? Turn the phone off (pull the battery if you have to) then press and hold the camera button while you turn the phone on. You should get to a tri-color screen (this is the boot loader). Now plug in the USB cord and see if it switches from saying Serial to USB. If so, you can try flashing AN OFFICIAL ROM THAT WAS MEANT FOR YOUR PHONE (ie: Don't try to put an offical AT&T rom on an Orange). When you run the RUU program it will tell you that you need to have ActiveSync working, but don't worry about that. If your phone in bootloader shows USB, you can continue on.
BUT AGAIN... You need the Official rom that was meant for your device. Since you are not HardSPL'd you have to do it this way.
If you don't understand any of that, or have questions, don't just try it hoping you get it right...
As stated previously, it would be well worth you time to get someone like GSLEON to assist if you can.
Click to expand...
Click to collapse
thank you!!!!!!1
i have flashed to my priviuas rom the original 6.1 htc rom and now its ok!!!
tnk
speebman said:
thank you!!!!!!1
i have flashed to my priviuas rom the original 6.1 htc rom and now its ok!!!
tnk
Click to expand...
Click to collapse
Cool. Glad that worked for you.... NOW, your next task is to read and understand ALL the steps before you try flashing a custom rom. HardSPL that sucker (but understand and follow EVERY step before you try that) and then you should be good to go...
my only problem is that their are so many strings of information and so many threads even wiki is confusing.
i will try to do this after i will make some order it all of this.
tnx again 4 the help
danny
speebman said:
my only problem is that their are so many strings of information and so many threads even wiki is confusing.
i will try to do this after i will make some order it all of this.
tnx again 4 the help
danny
Click to expand...
Click to collapse
Yes it is, but if you read this sticky at the top, it should help (start with noob guide which is the first link I think):
http://forum.xda-developers.com/showthread.php?t=369282
speebman said:
my only problem is that their are so many strings of information and so many threads even wiki is confusing.
i will try to do this after i will make some order it all of this.
tnx again 4 the help
danny
Click to expand...
Click to collapse
Not to be mean but if you have red Wiki and looked at threads here and they "don't make sense to you". You really have no business flashing a rom. If you don't understand what you are doing sooner or later you will brick your phone from your lack of knowledge and it will be no ones fault but your own.
I am really surprised people were willing to repeat what has been typed out hundreds and hundreds of times on these forums.
Welcome to XDA

What the Hell Is Wrong with my S710?

Hello People
I have installed WM6.1 Rom.
But today (i dont know why (i'm a idiot)) i wanted WM6 back, when I restart, i cant start my Phone (HTC screen... and nothing happens) the phone doesnt continue to start.
Cane someone please help me?
EDIT: Hard Reset doesnt work
EDIT2: the same problem here:
http://forum.xda-developers.com/showthread.php?t=319448
Also, My HTC S710 phone don't wanna connect to the PC.
Sorry my english, i am Dutch speaker.
Thanks
JDMHatchy said:
Hello People
I have installed WM6.1 Rom.
But today (i dont know why (i'm a idiot)) i wanted WM6 back, when I restart, i cant start my Phone (HTC screen... and nothing happens) the phone doesnt continue to start.
Cane someone please help me?
EDIT: Hard Reset doesnt work
EDIT2: the same problem here:
http://forum.xda-developers.com/showthread.php?t=319448
Also, My HTC S710 phone don't wanna connect to the PC.
Sorry my english, i am Dutch speaker.
Thanks
Click to expand...
Click to collapse
And, do you have test reflash ?
fireburned said:
And, do you have test reflash ?
Click to expand...
Click to collapse
I think not,.. how you reflash it?
JDMHatchy said:
I think not,.. how you reflash it?
Click to expand...
Click to collapse
Enter bootloader mode and reflash :
- switch off your phone, hold the camera button and connect the usb cable. If USPL was flashed you should have no problem flashing another ROM
Bye
fireburned said:
Enter bootloader mode and reflash :
- switch off your phone, hold the camera button and connect the usb cable. If USPL was flashed you should have no problem flashing another ROM
Bye
Click to expand...
Click to collapse
I See the RED - GREEN - BLUE Screen..
Look at the Wiki article on SD-Card flashing, that should be the easiest way to flash the ROM again!
Flash ROM/Radio from SD-Card
http://wiki.xda-developers.com/index.php?pagename=vox_sdcardflashing
1) Once you have all the files you need, either from the kitchen or from prepackaged ROMs (they can be extracted with WinRAR),
What Files do they mean? + where do i get these files?
=(
That just means that you have to have the ROM, either from the forum or self made through the kitchen! In your ROM there is a *.nbh file. Just follow the steps from there. The nbh is the only file you will need!
frauhottelmann said:
That just means that you have to have the ROM, either from the forum or self made through the kitchen! In your ROM there is a *.nbh file. Just follow the steps from there. The nbh is the only file you will need!
Click to expand...
Click to collapse
I have tried the SD Card Flashing, by following the instructions on the wiki. The bootloader will scan my SD card but comes up with and Invalid Certificate error and won't start the upgrade.
What now?
Dutch
Buy HTC Diamond, and never again repair what is working fine! :-D
P.S.: Sorry my English Im Czech speaker.

Urgent Help Needed!

Hi Guys,
I stupidly installed the Cotulla rom for G3 devices on my fathers G4 and now whenever it boots it says NOT FOR G4. Is there any way I can restore it to what it was before or anything? I really hope I havent ruined it as its around £200 worth of phone. If you can help. PLEASE respond here.
Much Appreciated.
John.K said:
Hi Guys,
I stupidly installed the Cotulla rom for G3 devices on my fathers G4 and now whenever it boots it says NOT FOR G4. Is there any way I can restore it to what it was before or anything? I really hope I havent ruined it as its around £200 worth of phone. If you can help. PLEASE respond here.
Much Appreciated.
Click to expand...
Click to collapse
Take it easy.... do a doc format and try to install another rom which works in G4... instructions here http://forum.xda-developers.com/showthread.php?t=567017
as always been told, read the instruction first before flashing. better yet, read the wiki, its the only sticky thread thus cannot escape anyone's attention. it will certainly help yu solve yur problem with ease..
Ah, How do I go about a doc format? Which one of the links in that thread you directed me to is the right one? I really need to get this done in 48 hours since hes coming back from spain. I thought I'd surprise him with a new rom instead I think I may have bricked his phone :S. I'd appreciate if you could respond Rajivshahi. Also phezthie. Cotullas thread was not at all clear on what would happen if i installed it on a G4 or how to even spot a G4 for that matter.
Figured out how to do a DOC format using mtty. But I dont know how to reflash the device (This time ill use a G4 rom lol)
John.K said:
Ah, How do I go about a doc format? Which one of the links in that thread you directed me to is the right one? I really need to get this done in 48 hours since hes coming back from spain. I thought I'd surprise him with a new rom instead I think I may have bricked his phone :S. I'd appreciate if you could respond Rajivshahi. Also phezthie. Cotullas thread was not at all clear on what would happen if i installed it on a G4 or how to even spot a G4 for that matter.
Click to expand...
Click to collapse
Ok first try to install the G4 rom same way as you installed... if it doesn't install then only use doc format which can be found here http://wiki.xda-developers.com/index.php?pagename=DOC_Format
and this is how you spot a G4 from G3 .... G3 devices have a boot loader up to 1.99999 and G4 devices have 2.XXXXX in bootloader mode....
and good luck it won't take 48hours at max 1 hours.... so still surprise for your dad....
Ok. i installed it using a .exe when i connected the device to my pc. should i do the same? then if not format using DOC. But if i format using DOC how do i reflash? I know how to flash using the .exe but not how using DOC.
John.K said:
Figured out how to do a DOC format using mtty. But I dont know how to reflash the device (This time ill use a G4 rom lol)
Click to expand...
Click to collapse
Same after doing Doc format... disconnect from pc Put it in bootloader mode ( power + backlight + reset button ) simulteniously and just plug it in your computer and just double click the ROMUpgradeUt.exe it should do the rest, and if it's Tomal's rom just double click it and it will do the work....
ok. but for some reason when i connect the device to my pc then open mtty i only see port COM1 and port COM2 is this common or is it because im running Windows 7. also do u reccomend tomal v9 or v10
also do u have msn so you can guide me step by step?
John.K said:
ok. but for some reason when i connect the device to my pc then open mtty i only see port COM1 and port COM2 is this common or is it because im running Windows 7. also do u reccomend tomal v9 or v10
Click to expand...
Click to collapse
Try to do it in vista as it is the easiest, for windows 7 you need to download some driver and install it, if it's 64 bit then you need to disable the digital signature before you boot.... tomal v9 and v10 both is wm6.5 so it eat's lots of memory so you want more ram to play around then use v8.9 ( which is wm 6.1).... for flashing under windows 7 see this thread...
http://forum.xda-developers.com/showthread.php?t=481205&page=2
ah ok. ill just move downstairs onto my dads windows xp pc and do it from there. save hassle. is tomal v10 and 8.9 compatible with G4 devices?
John.K said:
ah ok. ill just move downstairs onto my dads windows xp pc and do it from there. save hassle. is tomal v10 and 8.9 compatible with G4 devices?
Click to expand...
Click to collapse
yes both of them are.... only contulla's rom is for G3...lol
Thank you so much. I managed to install Tomal's 8.9 but for some reason it says the radio is 0. what is the radio and what does it mean by 0? Also how can i tell how much RAM i have.
John.K said:
Thank you so much. I managed to install Tomal's 8.9 but for some reason it says the radio is 0. what is the radio and what does it mean by 0? Also how can i tell how much RAM i have.
Click to expand...
Click to collapse
SO it says radio is zero ???? try to make a call.... radio is for network reception... and to see how much free ram you have go to start>setting>system>memory.... and try to make call and see if it works otherwise you have to fix your radio... or try to reset your device and see on your bottom right and tell me the value for R x.xx.xx
R x.xx.xx
G xx.xx.xx
O x.xx.xx

Categories

Resources