stock on 0% flasahing rom - Tilt, TyTN II, MDA Vario III Windows Mobile ROM De

hello everybody
i started to flash a new rom
Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid V2_1_65.14.06[No_CubeV2]
and i think i followd all the instractions but after starting the flashing it stock on 17% after removing the battery as the program said it wont go over 0%
firs i installed kaiser-HardSPLv1 and after that i started to flash the rom and its not working.
pls tell me what to do to save my nice phone
dannt

speebman said:
hello everybody
i started to flash a new rom
Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid V2_1_65.14.06[No_CubeV2]
and i think i followd all the instractions but after starting the flashing it stock on 17% after removing the battery as the program said it wont go over 0%
firs i installed kaiser-HardSPLv1 and after that i started to flash the rom and its not working.
pls tell me what to do to save my nice phone
dannt
Click to expand...
Click to collapse
"think" you followed all the directions?

sorry for my bad english or leak of knolge in this part of the world i just read so much regarding this subject ant the more i read the more i got confused
so i just sow the first logical faq and followd him, plz i need my phone all my life is in their, help me.
danny

speebman said:
hello everybody
i started to flash a new rom
Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid V2_1_65.14.06[No_CubeV2]
and i think i followd all the instractions but after starting the flashing it stock on 17% after removing the battery as the program said it wont go over 0%
firs i installed kaiser-HardSPLv1 and after that i started to flash the rom and its not working.
pls tell me what to do to save my nice phone
dannt
Click to expand...
Click to collapse
Things that will help others help you:
1. where are you located?
2. who is your provider
3. what ROM WERE you on?
4. ok - you had a phone that was working - and you did:
a. what did you do first?
b. second?
c. etc.
Your message KINDA indicates that you flashed a ROM and had issues - so you THEN flash HARDSPL? was that successful?
Bill

im from israel but my phone is from uk i think, my original rom was the HTC 6.1
i just run the kaiser-HardSPLv1 program and then i started flashing the rom duty 6.1 rom and it stoped at 17% like the program said i removed the batery and started the flashing prosse again but now it doesny even go above 0%, now im stock in the tri color screan
its writen
kais130
spl-3.28.0000
cpld-8
and usb in the littel whait screan

speebman said:
im from israel but my phone is from uk i think, my original rom was the HTC 6.1
i just run the kaiser-HardSPLv1 program and then i started flashing the rom duty 6.1 rom and it stoped at 17% like the program said i removed the batery and started the flashing prosse again but now it doesny even go above 0%, now im stock in the tri color screan
its writen
kais130
spl-3.28.0000
cpld-8
and usb in the littel whait screan
Click to expand...
Click to collapse
you don't have hardSPL installed..! surprise, surprise

u don't have hardspl flashed from bootloader info u provided. flash hardspl be4 flashing any roms.
please search and read; this has been answered many times.
p.s. use the new hardspl by jocky which is a sticky in this forum.

speebman said:
im from israel but my phone is from uk i think, my original rom was the HTC 6.1
i just run the kaiser-HardSPLv1 program and then i started flashing the rom duty 6.1 rom and it stoped at 17% like the program said i removed the batery and started the flashing prosse again but now it doesny even go above 0%, now im stock in the tri color screan
its writen
kais130
spl-3.28.0000
cpld-8
and usb in the littel whait screan
Click to expand...
Click to collapse
OK - I do not think that you got the HARDSPL installed on your phone correctly - BECAUSE - I believe that it would say OLIPOF or JOCKY on it and it does not.
I have not seen the new HARDSPL 328 and 329 but it LOOKS like to me that you did not successfully get the HARDSPL on your phone.
Personally - I would scan the message boards for GSLEON3 (user name) and send him a private message - there are many others that can help you and he or others MAY come trolling by and take pity on you - but at the moment he is the one that helps people in your situation the most from what I have seen.
I would NOT continue to work on it myself as you can definitely mess your phone up permanently. Does your phone still go into boot loader mode? If so - can you flash the required HARDSPL onto your phone?
Find a message that GSLEON3 has left and then lik on his name and send him a private message - he is very nice - BUT - he is VERY busy - continue to be nice and he will most likely get you back and running.
Bill

first of all thank u for the help
but, wich one i need? 28 or 29?
and how do i do this spl if i cant copy them to my device.
danny

speebman said:
first of all thank u for the help
but, wich one i need? 28 or 29?
and how do i do this spl if i cant copy them to my device.
danny
Click to expand...
Click to collapse
Danny -
Deep cleansing breaths here ok?
1. personally - I would PUT BACK what ever you had on your phone and get it running again - trying at this point to get ot to go to a different ROM is not a good idea right at this minute.
2. 28 and 29 from what I read makes no difference - users try each one to see which one works better on THEIR flashed ROM.
3. What I would do is look for the HARDSPL that goes with what you had loaded to begin with - or the actual SPL that came with your original ROM and put that one back.
I would be stuck here because I have to use JUMPSPL on my phone because I get the white screen - but I THINK that (don't quote me because I do not do it this way) if you don't get the white screen you can just flash the HARDSPL to your phone without JUMPSPL (having to be able to copy something to your phone.
HOWEVER - if you cannot or do not know how to continue from reading the WIKI - you MUST request help from a professional - I have already recommended one. (GSLEON3)
Bill

my active sink is not seeing the devais, maby MTTY? wil help

speebman said:
my active sink is not seeing the devais, maby MTTY? wil help
Click to expand...
Click to collapse
Based on your current track record, I wouldn't suggest you use MTTY as you have a VERY HIGH probability of bricking your phone (ie: it won't ever be usable again).

so im fu--.

Can you get the phone into the bootloader mode? Turn the phone off (pull the battery if you have to) then press and hold the camera button while you turn the phone on. You should get to a tri-color screen (this is the boot loader). Now plug in the USB cord and see if it switches from saying Serial to USB. If so, you can try flashing AN OFFICIAL ROM THAT WAS MEANT FOR YOUR PHONE (ie: Don't try to put an offical AT&T rom on an Orange). When you run the RUU program it will tell you that you need to have ActiveSync working, but don't worry about that. If your phone in bootloader shows USB, you can continue on.
BUT AGAIN... You need the Official rom that was meant for your device. Since you are not HardSPL'd you have to do it this way.
If you don't understand any of that, or have questions, don't just try it hoping you get it right...
As stated previously, it would be well worth you time to get someone like GSLEON to assist if you can.

mfrazzz said:
Can you get the phone into the bootloader mode? Turn the phone off (pull the battery if you have to) then press and hold the camera button while you turn the phone on. You should get to a tri-color screen (this is the boot loader). Now plug in the USB cord and see if it switches from saying Serial to USB. If so, you can try flashing AN OFFICIAL ROM THAT WAS MEANT FOR YOUR PHONE (ie: Don't try to put an offical AT&T rom on an Orange). When you run the RUU program it will tell you that you need to have ActiveSync working, but don't worry about that. If your phone in bootloader shows USB, you can continue on.
BUT AGAIN... You need the Official rom that was meant for your device. Since you are not HardSPL'd you have to do it this way.
If you don't understand any of that, or have questions, don't just try it hoping you get it right...
As stated previously, it would be well worth you time to get someone like GSLEON to assist if you can.
Click to expand...
Click to collapse
thank you!!!!!!1
i have flashed to my priviuas rom the original 6.1 htc rom and now its ok!!!
tnk

speebman said:
thank you!!!!!!1
i have flashed to my priviuas rom the original 6.1 htc rom and now its ok!!!
tnk
Click to expand...
Click to collapse
Cool. Glad that worked for you.... NOW, your next task is to read and understand ALL the steps before you try flashing a custom rom. HardSPL that sucker (but understand and follow EVERY step before you try that) and then you should be good to go...

my only problem is that their are so many strings of information and so many threads even wiki is confusing.
i will try to do this after i will make some order it all of this.
tnx again 4 the help
danny

speebman said:
my only problem is that their are so many strings of information and so many threads even wiki is confusing.
i will try to do this after i will make some order it all of this.
tnx again 4 the help
danny
Click to expand...
Click to collapse
Yes it is, but if you read this sticky at the top, it should help (start with noob guide which is the first link I think):
http://forum.xda-developers.com/showthread.php?t=369282

speebman said:
my only problem is that their are so many strings of information and so many threads even wiki is confusing.
i will try to do this after i will make some order it all of this.
tnx again 4 the help
danny
Click to expand...
Click to collapse
Not to be mean but if you have red Wiki and looked at threads here and they "don't make sense to you". You really have no business flashing a rom. If you don't understand what you are doing sooner or later you will brick your phone from your lack of knowledge and it will be no ones fault but your own.
I am really surprised people were willing to repeat what has been typed out hundreds and hundreds of times on these forums.
Welcome to XDA

Related

HELP!! Cant use my Wizard anymore

Hi guys i'm pretty new in this scene and i did something stupid...
i've downloaded Win Mobile 6 from usenet and installed it without reading
anything. At 95% of the installation it hangs and when i try to recover it doesnt work. Now i only have the screen with the green red and blue at the background. I've tried a hard reset but that doesnt work either and i tried to search by google and found nothing.
Am i right that i had to remove some kind of G4 lock? And does somebody know how to help me getting things started again.....
thnx in advance.
greetz
JohnGotti
do your carriers flash and let it fully finish. Once thats done, read a little on making sure your device is unlocked and once you get that done, youll be ready to move to the next level.
what your device is g3 or g4?
how do i perform such a flash and how can i see what kind of G3/4 i have??
If you got a G4 or G3 IPL/SPL 2.x:
Try flasing wizard_love rom from the bootloader screen.
If you got IPL/SPL 1.x:
flash button_rom from the bootloader screen.
damn thats a whole mouth full and i dont get it how its intended.....
perhaps you can tell me in dutch or in a language a stupid fool can understand
JohnGotti said:
damn thats a whole mouth full and i dont get it how its intended.....
perhaps you can tell me in dutch or in a language a stupid fool can understand
Click to expand...
Click to collapse
See you're private messages!
ok thank you
i have the same problem..and i've tried all versions,RUU_mUn_aRTM_10_2_0_8_WWEx.exe, Wizard_Love_2[1].26.10.2_WWE_Novii_CF2.exe, Molski[1].Biz_AKU3.3_21911_8MB_Crossbow.rar...and now when i open it, shows me for 1 second the bootloader screen, and then it's shutting down himself..what should I do???
ady_uaic said:
i have the same problem..and i've tried all versions,RUU_mUn_aRTM_10_2_0_8_WWEx.exe, Wizard_Love_2[1].26.10.2_WWE_Novii_CF2.exe, Molski[1].Biz_AKU3.3_21911_8MB_Crossbow.rar...and now when i open it, shows me for 1 second the bootloader screen, and then it's shutting down himself..what should I do???
Click to expand...
Click to collapse
You should provide more information... What phone model is this? Is it a G3 or G4? What is your IPL / SPL? What did you do before this started happening? Was the battery fully charged before you started this process? Did your PC give you errors when you tried to do teh initial flash that started this process?
The more information you provide the better we can help.
If your phone won't stay turned on when its on the bootloader (rainbow screen) then either your battery is almost dead, or you may have bricked your phone. But we need more details.
this happened to me once, i almost had an heart attack.. but anyway.. what u get there is the bootloader mode, which is you can still save the phone.. when this happened to me, all i did was, i upgraded to original tmobile rom, and from there i ve used shell tool to upgrade to wm6 (my wizard is not unlocked but shelltool takes care of that and u dont have to worry).. its really easy.. let me know what happened.. no worries
Dont worry guys... I think most of us here, faced the same things before, Me included.
Everybody here is quite nice and will help u in any way we can..
Just do some research and fact finding before u flash your rom..
One of the article that I think is very helpful to me is Dr P post on how to unlock and flash your wizard.
If you have any problem or question after reading that, just ask.
Hopefully u can find your answer and your wizard are all healthy..
mfrazzz said:
You should provide more information... What phone model is this? Is it a G3 or G4? What is your IPL / SPL? What did you do before this started happening? Was the battery fully charged before you started this process? Did your PC give you errors when you tried to do teh initial flash that started this process?
The more information you provide the better we can help.
If your phone won't stay turned on when its on the bootloader (rainbow screen) then either your battery is almost dead, or you may have bricked your phone. But we need more details.
Click to expand...
Click to collapse
my phone is G4...first, when i tryed to change the rom, on 95% was blocked..and i have wait about 20 minutes, and nothing...the spl is....01...the battery was quite full, but after several tries, i don't know now how it is (i supose to be from the battery, but i still need a very good rom for it)
ok.. here are the steps.. its very easy.. i had the samething..
your phone is probably CID locked and you will need a shelltool to install that ROM.. so what you need to do is just download the original tmobile ROM.. and connect the phone and install the original ROM.. You didnt birck the phone because you get the bootloader screen.. which means, you can still save the phone..
anyway.. connect the phone via usb and install after you install the original wm5, download the shelltool from here and follow the instructions.. and install the ROM via shelltool.. Then you should be good to go with the new
wm6.
http://forum.xda-developers.com/show...ght=CID+unlock
ok, but where can i get that original rom?
rom
ady_uaic said:
ok, but where can i get that original rom?
Click to expand...
Click to collapse
if you cant get the tmobile rom
use the wizard love rom you can get it from here http://rapidshare.com/users/EXGZ7T
flash this rom not using the shell tool once flashed the use the shell tool following all the instructions and it should work
now i've installed RUU_mUn_aRTM_10_2_0_8_WWEx.exe (i've tried and that version also, but same situation) and after reflashing, it shows me windows mobile screen, and then restart the phone...what should I do??? i've tried many roms...could someone please give me an original rom, in english?
ady_uaic said:
now i've installed RUU_mUn_aRTM_10_2_0_8_WWEx.exe (i've tried and that version also, but same situation) and after reflashing, it shows me windows mobile screen, and then restart the phone...what should I do??? i've tried many roms...could someone please give me an original rom, in english?
Click to expand...
Click to collapse
Simple: Go to the Wizard Upgrading forum and in the stickies is a post by Dr. Putingham on how to CID Unlock your device. Scroll to the bottom of the first post and there is a direct link to pull the Tmobile 2.26 official ROM.
But as EasyMob suggested (and gave a link to) you may be better off with teh Wizard Love rom since you are a G4 device. Wizard Love ROM is very good at recovering G4 devices.
mfrazzz said:
Simple: Go to the Wizard Upgrading forum and in the stickies is a post by Dr. Putingham on how to CID Unlock your device. Scroll to the bottom of the first post and there is a direct link to pull the Tmobile 2.26 official ROM.
But as EasyMob suggested (and gave a link to) you may be better off with teh Wizard Love rom since you are a G4 device. Wizard Love ROM is very good at recovering G4 devices.
Click to expand...
Click to collapse
OK..I'm agree with you, but please understand: I've tried that version too...same situation...please give me the link with the Tmobile 2.26 official ROM
ady_uaic said:
please give me the link with the Tmobile 2.26 official ROM
Click to expand...
Click to collapse
If you read my previous post, I gave you exactly how to find the link (Hint, its in the first post of Dr. Putingham's sticky in the Wizard Upgrading forum and the title is about How to CID Unlock your device. Was that too hard?
i believe you, but i can't find it...and about 3 days i'm hopeless, because with any ROM version, the phone is still restarting, after reflashing (i didn't flash it with tmobile original rom)...please please, give me the link of the topic...

Wont Boot

I am a little confused. I have been trying to get WM6 on my T-mobile Wizard and actually got TNT 1.1 loaded and was working fine. I found that I could no longer view my contacts. The page would appear and then as quickly as it appeared it disappeared.
So I figured, I at least got it this far. I will just reload this rom and see if perhaps something did load right. Well after the reload. The phone boots up to the splash screen with IPL\SPL numbers and just sits. NOTHING.
I left it there for like 2 hours and still nothing. But I can still get into the BootLoader.
My questions to you gurus is:
Is the phone fubared?
Can I do some kind of master reset?
Why would it tell me "Invalid Vendor ID" when trying to flash the orginal T-mobile rom?
Are there any tools that can help me out? Paid\free?
Please help!!! Seriously! Please HELP!!!
Very much appreciated.
Thanks
Drunknasty said:
I am a little confused. I have been trying to get WM6 on my T-mobile Wizard and actually got TNT 1.1 loaded and was working fine. I found that I could no longer view my contacts. The page would appear and then as quickly as it appeared it disappeared.
So I figured, I at least got it this far. I will just reload this rom and see if perhaps something did load right. Well after the reload. The phone boots up to the splash screen with IPL\SPL numbers and just sits. NOTHING.
I left it there for like 2 hours and still nothing. But I can still get into the BootLoader.
My questions to you gurus is:
Is the phone fubared?
Can I do some kind of master reset?
Why would it tell me "Invalid Vendor ID" when trying to flash the orginal T-mobile rom?
Are there any tools that can help me out? Paid\free?
Please help!!! Seriously! Please HELP!!!
Very much appreciated.
Thanks
Click to expand...
Click to collapse
if your device is G3, unlocking is required to flash any rom, before upgrade your device, it is recommended to flash an official WM5.0 rom (in your case T-Mobile rom) with IPL and SPL 2.xx then flash again.
in general there are many probabilities for your issue.
((Where is TNT1.1?? did you mean 1.0?? ))
My Bad meant 1.0
So to get it straight.... I will need to unlock my phone each time?
Oh and to correct myself again, when flashing with the T-mobile ROM it says UPGRADE ONLY. And the read me file says its the wrong RUU. But it is the same file from Tmobile I used when I first got the phone. But I will try again.
Are there any other suggestions?
You need to read the "how to flash" sticky.
I did. I am not any expert or anything but I believe the phone is unlocked already since I once had WM6 on my phone. The real issue I am having is that it wont boot past the splash screen after flashing.
And that is true when re following the steps in guide. After flashing to the button rom it will not boot past the splash screen.
Try another ROM.
Sounds like you need the "Wizard Love" rom. I dont have the link handy but I am sure someone else does.
Drunknasty said:
I did. I am not any expert or anything but I believe the phone is unlocked already since I once had WM6 on my phone. The real issue I am having is that it wont boot past the splash screen after flashing.
And that is true when re following the steps in guide. After flashing to the button rom it will not boot past the splash screen.
Click to expand...
Click to collapse
Already got it. Thanks I am trying to load it now. But the only thing is that the last time it failed and I can understand what the error says. I know the number is 300 but can read the language.
But I will let you guys know when this load completes.
Thanks again for all the assistance.
No worky worky. The load completed and then boots the splash screen shows and then stays there.
Any ideas?
Try to remove the battery and let it out for at least half an hour. Then put it back in and see what it does then.
I thought the same thing too. So when it got done last night, out of frustration, I removed the battery and left it there to wait on when I get off work today. I will report back on what happens.
Again I would like to thank you guys for helping me. I really do appreciate it!
STEP 1 install the original manufacturer ROM
T-mobile UK
http://www.tm-phonedownloads.com/download_manager_mda_vario.html
T-mobile US
http://www.t-mobile.com/wmupgrade/
Search for the original rom for any other
instructions on how to use the original rom can be found here
http://support.t-mobile.com/knowbase/root/public/tm23294.htm?&A2L.SERVICE=AboutUpgrading
Put it in the bootloader mode.. ( three color screens )
hope this helps..
cheers
Praneet
Ok I did that and it gave me ERROR 296: UPGRADE ONLY
Then it tells me that the NBF file cannot be used for my PDA Phone. Please get newer NBF file.
Is there any way I can get the Tmobile splash and IPL\SPL number back to original, it doesnt need to boot all the way into WCE but atleast show the same numbers and splash during boot up?
Or any other way to get this thing to work?
Thanks guys
BTW it is a HTC Wizard from T-mobile.
If you are getting an error 300 you need a newer rom update utility, and regardless if your phone is a G3 or G4 it needs to be unlocked before you flash any rom.. LOAD a OFFICIAL cingular ROM onto your device before going any further, then unlock your phone either via www.imei-check.com or through some of the tools offered here...
Which one should I down load from Cingular? Even though I have a Tmobile phone?
what ipl and spl are you using and what radio are you using. Just post all the numbers from the bootloader
As soon as I get home, I will post them.
Thanks
Ipl 1.01
Spl 3.08
Thanks
Drunknasty said:
Ipl 1.01
Spl 3.08
Thanks
Click to expand...
Click to collapse
uh oh. someone tell me if I'm wrong, but I think this is bad. it's the result of flashing a g4 with g3 or the other way around... keep searching, and good luck.
flash the original t-mobile rom. your phone doesn't appear to be unlocked. good luck

RUU error (262) update error

Hello guys...
Iam not new, and i have already flashed my first(it was wasted not by my fault)KAISER, it was one year ago and i did it with HARDSLPv1, and lately added some new roms cooked by sakajati(respect)...
Yesterday i bought new one(but one year old) so i tried to flash him as well, i have used HARDSPL 1.93, and then i tried to put Sakajati"s 4th feb ROM, but i come across one big trouble, everytime i try to put it on i encounter the same RUU error:
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue. Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
what to do...????
i am very afraid that i destroyed my Kaiser...???
what it means that Wince is destroyed...
Please help me, i am desperate...
Iam not new,
Click to expand...
Click to collapse
But the solution could be found here (search)
If you see the tri color screen everythng is ok, just win mobile is destroyed. Try to flash a rom from your sd card
Thank you very much...
I hope it will work, i really did search for about an hour and tried to put rom on sevral times, but i didnt find nothing 100% secure, i dont want to indanger the unit any more that i did...
thanks again, i will try it tommorow morning at my job, thats where my SD card is...
)))
greganovak said:
Thank you very much...
I hope it will work, i really did search for about an hour and tried to put rom on sevral times, but i didnt find nothing 100% secure, i dont want to indanger the unit any more that i did...
thanks again, i will try it tommorow morning at my job, thats where my SD card is...
)))
Click to expand...
Click to collapse
Part of the problem is that 1.93 is a jump spl and should be used to upgrade to Hard spl 3.29 or 3.56, not as an spl on its own. You need to run jump spl 1.93 from your device and make sure you are connected to your computer, when you see the bootloader you need to unplug your USB, count to 10 and plug your USB back in then flash a hard spl to your phone! Again 1.93 is not a Hard Spl by itself, it is only a middle man to flash a Hard Spl.
I think the best would be to flash a stock rom at first, cause therefore you don't need an other bootloader. Then flash Hardspl (3.29 if you have a kaiser or 3.56 if you have a tilt) and then flash any rom you want
i obviusly have a lot to learn, mate how do I asses if I have TILT or KAISER, what is the main difference...
[email protected]: i have already DL the stock rom before i posted the tread, i hoped on that resolution if there were no answer...
in about 10 hours from now i will get my hands on my tilt/kaiser and hope to arranged the mess i done; I drop by in any case at that time and notify you about condition and my successes...
p.s.:sorry for my poor english...
greganovak said:
i obviusly have a lot to learn, mate how do I asses if I have TILT or KAISER, what is the main difference...
[email protected]: i have already DL the stock rom before i posted the tread, i hoped on that resolution if there were no answer...
in about 10 hours from now i will get my hands on my tilt/kaiser and hope to arranged the mess i done; I drop by in any case at that time and notify you about condition and my successes...
p.s.:sorry for my poor english...
Click to expand...
Click to collapse
It realy doesnt make that much of a difference, I have a tilt and I use 3.29 and I would recomend it to anyone over 3.56 so flash either one, they will both work! And your english is great so no need to say sorry!
greganovak said:
i obviusly have a lot to learn, mate how do I asses if I have TILT or KAISER, what is the main difference...
[email protected]: i have already DL the stock rom before i posted the tread, i hoped on that resolution if there were no answer...
in about 10 hours from now i will get my hands on my tilt/kaiser and hope to arranged the mess i done; I drop by in any case at that time and notify you about condition and my successes...
p.s.:sorry for my poor english...
Click to expand...
Click to collapse
A Tilt is a At$T branded Kaiser, a TyNT II is a HTC branded Kaiser. Tilt has a different keyboard and OEM rom., only differences. People say use 3.56 if you have a Tilt because that is an AT$T Spl, but I use 3.29 on My Tilt and it works great so it doesn't really matter.
hey...
nothing seems to work...
I have tried to put default rom dl from here: http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs but the problem is that it is not bootable from SD, that has to be because the USB conection isnt on (i selected the 3.34.721.2) so i given up that way
Then i flashed the HARD spl 3.29(have kaiser) via SD steb by step first with this instruction: http://forum.xda-developers.com/showthread.php?t=433835; and it dint go through
so i tried with this instruction: http://forum.xda-developers.com/showthread.php?t=420683
it didnt work either, they are the same I know(noticed later);
So problem is that i stuck at WHITE screen that says "LOADING..."
nothig else...???
finally i manage to load/boot the htc rom from xda-wiki site, but i have to chose another one
I have tried to put default rom dl from here: http://wiki.xda-developers.com/index...me=Kaiser_ROMs but the problem is that it is not bootable from SD, that has to be because the USB conection isnt on (i selected the 3.34.721.2) so i given up that way
Click to expand...
Click to collapse
Hey man, nice to see that your device rewakes, you can flash every rom from sd card, simply rename the nbh file to kaisimg.nbh than restart into bootloader and it will automatically take the one from the card
Unfortanly, althought i would like you to be right, you are not. When i tried to do it via SD, i stuck at white screen saying LOADING...(blue) and nothih further... and i tried also the Cmonex_s Hard SPL3.29_SD which also stucks at same screen
So now (after updatig with default rom) that i have basicly normal working device i startet from the top. Using @mskip"[email protected] tutorial called: Flasing your first rom (for noobs); it all goes well, till i start to update RUU(sakajati 4 feb) if it matters, and i tried both (spls 1.56 and 1.93), it stops updatig at 17% and notrhin else then works just puting back the HTC default rom from wikiXDA side(thank god for that)
i am thinking of MTTY, although i dont know what it does guys here almoste all say it fix bad rom flash, but i am not sure if thats my main problem, i rahter think it has something with spls...
if someone has some good advice i will be very grateful...
greganovak said:
Unfortanly, althought i would like you to be right, you are not. When i tried to do it via SD, i stuck at white screen saying LOADING...(blue) and nothih further... and i tried also the Cmonex_s Hard SPL3.29_SD which also stucks at same screen
So now (after updatig with default rom) that i have basicly normal working device i startet from the top. Using @mskip"[email protected] tutorial called: Flasing your first rom (for noobs); it all goes well, till i start to update RUU(sakajati 4 feb) if it matters, and i tried both (spls 1.56 and 1.93), it stops updatig at 17% and notrhin else then works just puting back the HTC default rom from wikiXDA side(thank god for that)
i am thinking of MTTY, although i dont know what it does guys here almoste all say it fix bad rom flash, but i am not sure if thats my main problem, i rahter think it has something with spls...
if someone has some good advice i will be very grateful...
Click to expand...
Click to collapse
Hi,
I couldn´t flash my Kaiser via SD at the first time and tried something that worked.
The SD´s are formatted in Fat16 usually, try to format to Fat32... It seems like a stupid thing, but worked for me.
Reagards and good luck.
SD must be formated FAT32, to work, also I sugest a smal card, 512 or something like that, SHDC usual doesn't work
I have 1GB SD and its not shdc, so thats ok.and i have done it right now, like you two guys said so i formated it with FAT32 but still no succes.
I guess that this tree lines in red/green/blue screen arent right:
KAIS130
SPL-3.02.0000
CPLD-8
i thing this SPL has to da something to do with all this mess a have done
I have flashed a couple of roms( i had three devices) and i flashed a few for my friends and all was OK till now, and i dont know what else to do...
greganovak said:
I have 1GB SD and its not shdc, so thats ok.and i have done it right now, like you two guys said so i formated it with FAT32 but still no succes.
I guess that this tree lines in red/green/blue screen arent right:
KAIS130
SPL-3.02.0000
CPLD-8
i thing this SPL has to da something to do with all this mess a have done
I have flashed a couple of roms( i had three devices) and i flashed a few for my friends and all was OK till now, and i dont know what else to do...
Click to expand...
Click to collapse
Yes, you still have a stock spl on there. It needs to be hard spl'd before you flash anymore. Check out the stickies at the top of the forum.
hi again...
Well, I respect the "rules" of forum, thats why i wouldnt ask for insructions that are already written(thanks for the authors) with that i mean stickys, because i read them, almost all...
But I still tried once again, and I came across the same thing, i stuck at 17% when loading RUU or if i choose the VIA SD i stuck at white screen with blue text saying (LOADING...)...
nothing else helps than loading the dafault ROM by HTC... as i already said once again...
if i manage to solve the problem i will be in touch; what do you thing about MTTY
Edit 1:
i have done everything as it says in the instruction, and just like some of you "replyed" me...
but i always stuck at 17%when loading RUU, when i flash it with SPL 1.56 or 1.93 i never get stuck at white screen it always apeare the mentioned SPLs nimbers and some other text in yellow but when i then load RUUs i stuck at excatly 17% nothing less nothing more
edit 2:
yupi....yupi
i made it...
http://forum.xda-developers.com/showthread.php?t=354061 here is my lifesavior...
those instruction were the one that helped my problem...
it is very nice to ba a part of this community....

Error [244] : Invalid model id

After loading the Stylez Black v.4 WM6.1 21051 D3D 101MB Full rom my phone give some problems, so i want to go back to the T-Mobile ROM.
But when i am trying to get this rom on the phone with this help i get now the ERROR [244] : INVALID MODEL ID warring, and looked with the search here but i get a lot of different options soms topics are more than 2 years old and that is not working.
So, what can i do to load a new rom or how do i get the orginal rom back on the phone?
plz help....
Thanks in advance...
Maybe this can help you http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
Or this too http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs
No solutions found...
Anyone ?? Please?
Hard-SPL bypasses Vendor Model check so shouldn't have any problem flashing any stock ROM have you tried others? Try and flash a HTC or AT&T stock, just a bizarre thing as everyone flashes stocks at some point especially if nearly brick and peeps generally flash stocks to bypass 6.5 hard-reset issue.
Can you go into bootloader and reply with Hard-SPL you have?
Also another way is to try flashing via SD, info in the flashing for noobs guide in sticky.
Same Issue
Hi,
I also use Hard SPL to flash new ROMs, however i also face the same issue with certain roms, currently i remember i has similar issues with ATNT rom.
Ok, or i am a realy noob or i doing somthing wrong...
Now when ik start the phone i get the Tri Color : (Red, Green, Blue Screen)
I did a hard reset en now the phone shows the boot screen (Stylez)
When i take the batterij off and put it in after 20 secs again or the tri color or the boot screen is loading or the screen is black.....
Please don't say that i can trow him into the trash...
All you have described there is normal. Now just follow the noobs guide to flashing in the sticky and do everything it says word for word. If the usb method doesnt work then use the sd card way.
stuntdouble said:
All you have described there is normal.
Click to expand...
Click to collapse
Ok, best news this week for me...
stuntdouble said:
Now just follow the noobs guide to flashing in the sticky and do everything it says word for word. If the usb method doesnt work then use the sd card way.
Click to expand...
Click to collapse
Sorry but i want to be shure, you mean this topic?
And if so, how do i load the rom?
Because the phone is not starting up normal,...
If you want i can make screenshots from the pc and make images so you can see?
Sorry for this noob questions....
Yes that is the thread I meant. So did you follow all that was said to do in the link about kaiser stuck at tri colour screen bootloader?
Ok, tryed but with the boot screen and with the Tri Color screen i can not make any USB connection with MTTY, when i start the kaiser with the camera button and with the powerbuton i can connect (USB is also an option (COM1 and COM2 also)).
But is this a correct move?
*contacted user via MSN*
Also tried several steps using the SD card but the phone will still hang into the tri-colour. It says loading, but won't reboot or do anything else.
Suggestions are still open.
FYI: It's a branded phone and wasn't CID-unlocked before. (Still not AFAIK)

[REQ] Task 29 - In a single exe

Anyone want to make this for the polaris as it would be very useful for cooks, and flashers. Also MTTY under 7 is less than can be desired.
Some info, http://forum.xda-developers.com/showthread.php?t=644781.
It says that you have to hex edit the RUU to get it to task 29 instead of 28 (i think)
So someone please take it!
chris10230 said:
Anyone want to make this for the polaris as it would be very useful for cooks, and flashers. Also MTTY under 7 is less than can be desired.
Some info, http://forum.xda-developers.com/showthread.php?t=644781.
It says that you have to hex edit the RUU to get it to task 29 instead of 28 (i think)
So someone please take it!
Click to expand...
Click to collapse
It shouldn't be that difficult!
RUU is done.
Just give me a dummy .nbh file and I will make a single exe ROM wiper for you
yep saw that, was trying to get the one off of the LEO thread, will have a go this evening, will PM you when I've got it. Didnt want to run, you could always extract it yourself i think... http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19 if you get the time before i send it.
Cheers, once again for this.
I received a PM from chris10230 with a dummy .nbh file but replying here for others to be able to comment.
As I have understood a dummy .nbh file comes from the Leo (HD2). I am not too good in technical aspects of .nbh files so I have a doubt: as the dummy file is about 5 megabytes it still flashes something to the device. If this something is flashed into the ROM area - no problem, as it will be erased straight after flashing. But if it flashes something beyond the ROM area and this something is Leo-specific, is it safe to flash it?
Maybe some pro's can provide more information on this. As soon as I will be sure that this file is safe for our device I'll make a ROM wiper.
leppa said:
I received a PM from chris10230 with a dummy .nbh file but replying here for others to be able to comment.
As I have understood a dummy .nbh file comes from the Leo (HD2). I am not too good in technical aspects of .nbh files so I have a doubt: as the dummy file is about 5 megabytes it still flashes something to the device. If this something is flashed into the ROM area - no problem, as it will be erased straight after flashing. But if it flashes something beyond the ROM area and this something is Leo-specific, is it safe to flash it?
Maybe some pro's can provide more information on this. As soon as I will be sure that this file is safe for our device I'll make a ROM wiper.
Click to expand...
Click to collapse
Yeh very good point don't use it! Maybe you could ask a cook to create a blank nbh?
long days, not thinking straight. Good thing that someone else is looking at this apart from me
chris10230 said:
Yeh very good point don't use it!
Click to expand...
Click to collapse
Maybe it is still usable. We just need someone to be able to tell where it writes to
By the way, a boot/splash screen shouldn't be too big. I think I can create an .nbh with the default (smart mobility) screen to be flashed. There was a tool for it somewhere in this forums. Just need some free time to find it and make an .nbh...
Or maybe someone already has an .nbh with it?
try this for making splash screens .nbh http://forum.xda-developers.com/showthread.php?t=334907
Splash
Original "Smart Mobility" splash, tested.
I think may use it as dummy nbh, because it be written to phone < 1sec.
I run MTTY for " task 29 " and i trie leppa RUU with task 29 and all was ok...
But i got one problem, after task 29 i trie to flash last ROM of Kostas244 and also last ROM of Pcarvalho and the phone don't boot... But also trie the ROM of cruiserrr (naked version) and the phone did boot up...
I run task 29 before flash each of 3 ROM's... there some trick I missed?
For i can boot the phone with the new Kostas244 ROM i had to flash first Original ROM from HTC and then flash Kostas244... was the only way...
Some advice?
flash after task 29 from bootloader screen
sbettencourt said:
I run MTTY for " task 29 " and i trie leppa RUU with task 29 and all was ok...
But i got one problem, after task 29 i trie to flash last ROM of Kostas244 and also last ROM of Pcarvalho and the phone don't boot... But also trie the ROM of cruiserrr (naked version) and the phone did boot up...
I run task 29 before flash each of 3 ROM's... there some trick I missed?
For i can boot the phone with the new Kostas244 ROM i had to flash first Original ROM from HTC and then flash Kostas244... was the only way...
Some advice?
Click to expand...
Click to collapse
As Task 29 wipes out all from the phone it will be too thumb to boot, so you have to put polaris to bootloader mode (hold cam & power button while resetting to see tri-color boot screen) before you can flash as I understood in the above threads - unfortunately untested. this thread was few hours late. Please report
@ leppa good thing to start this thread. I tried on my own rigth after last pcar release. Maybe it is also a good move to provide the appropriate radio with this task 29 RUU. Could save the cooks a lot of maintenance posts.
So the final procedure would look like this
1. flash Task 29 RUU with appropriate radio (up to cooks recommendation)
2. Hard Reset
3. flash new ROM
in general a very usable thing to make things easier thanks
sqeeza said:
As Task 29 wipes out all from the phone it will be too thumb to boot, so you have to put polaris to bootloader mode (hold cam & power button while resetting to see tri-color boot screen) before you can flash as I understood in the above threads - unfortunately untested. this thread was few hours late. Please report
Click to expand...
Click to collapse
Thank's for the answer sqeeza, but you didn't tell anything new What i say is with the ROM from cruiserrr, the phone boot up ok... But with kostas244 and Pcarvalho ROM's the phone didn't boot... and yes of course i put first in bootloader mode and then flashed the ROM's...
I don't know why the ROM from cruiserrr boot ok and the others didn't...
Edit:
My phone don't boot anymore the kostas244 ROM... at least the last one... sh*t... Can anyone tell me why?
sbettencourt said:
Thank's for the answer sqeeza, but you didn't tell anything new What i say is with the ROM from cruiserrr, the phone boot up ok... But with kostas244 and Pcarvalho ROM's the phone didn't boot... and yes of course i put first in bootloader mode and then flashed the ROM's...
I don't know why the ROM from cruiserrr boot ok and the others didn't...
Click to expand...
Click to collapse
Sorry sbettencourt, this is then beyond my horizon.
Did not read attentively enough. I would have had an explaination for the original HTC ROM since they usually write all parts of the ROM (radio, sys, etc. ) at once. So I assume task 29 wipes something that cruiserr writes with his ROM while the other cooks don't. So it would be up to one cook to understand/ answer this part. Maybe cruiserr can help here.
Thank you for reporting
No problem sqeeza is good to have some answers... maybe someone can tell how to resolve this... the previous version of Kostas244 the phone booted but i download the new one and erase the previous... big mistake... i couldn't guess this too...
at least the Original ROM boot's fine not a cool ROM but work's... i already miss wm6.5
_____________Edit:
already flash again the cruiserrr ROM and the phone booted normal... it's strange...at least for me... the only difference i can see and i don't know if this matter, is, with the Cruiser ROM the splashcreen changes like with Original ROM, but with Kostas244 and Pcarvalho ROM's the splashscreen don't change... Can this make the difference?????
Ok... and now, my POLARIS is dead... No lights no nothing.
sorry to hear that, you say in your signature, dead by task 2a... That is mentioned many times that it will brick a polaris. Still sorry that you got caught by it.
sbettencourt said:
Thank's for the answer sqeeza, but you didn't tell anything new What i say is with the ROM from cruiserrr, the phone boot up ok... But with kostas244 and Pcarvalho ROM's the phone didn't boot... and yes of course i put first in bootloader mode and then flashed the ROM's...
I don't know why the ROM from cruiserrr boot ok and the others didn't...
Edit:
My phone don't boot anymore the kostas244 ROM... at least the last one... sh*t... Can anyone tell me why?
Click to expand...
Click to collapse
probably cause the rom only has the OS, its missing radio and splash...but this is just me guessing dont know what cruiserrr has...mine only has OS part so people can choose their own radio/splash...thats why i advice people to flash original 1st...takes longer and all but is flawless...be very careful with task commands...
hope you can revive your device
cheers
Yep...but never notice that HardSPL + Task 2a could wipe everything... Now i can´t forget that...loool... Was wrong but a god lesson!!!
Now my P3650 goes like a trojan to HTC for repair... lets see... maybe in 1 month i have him back and fine
At least, maybe my case can alert again who dangerous can be doing Task 2a...
sbettencourt said:
Yep...but never notice that HardSPL + Task 2a could wipe everything... Now i can´t forget that...loool... Was wrong but a god lesson!!!
Now my P3650 goes like a trojan to HTC for repair... lets see... maybe in 1 month i have him back and fine
At least, maybe my case can alert again who dangerous can be doing Task 2a...
Click to expand...
Click to collapse
As I have understood task 2a wipes ALL phone memory, including Splash, Radio and even Bootloader?
meknb said:
try this for making splash screens .nbh http://forum.xda-developers.com/showthread.php?t=334907
Click to expand...
Click to collapse
DmK75 said:
Original "Smart Mobility" splash, tested.
I think may use it as dummy nbh, because it be written to phone < 1sec.
Click to expand...
Click to collapse
Thanks for the links, guys.
Unfortunately, I've had electricity off several times yesterday and no Internet access. As I work from home, I have a lot of work to do now. Will make a wiper closer to the end of this week, I think.
Whenever leppa
Also yeh i think it does litterally wipe EVERYTHING off the phone... Still sorry that it happened to you sbettencourt, feel for you and a the phone (R.I.P. till repair that is )...

Categories

Resources