Database Info

HELP...VERY URGENT!!

Guys i did a very stupid thing this evening. I flashed my Imate Jam using the MAupgrade_No ID and the Greek Qtek firmware.
The flashing was good but now my Jam cant go pass the first screen and continuously reboots. It says something about illegal rom used....and reboots
Any solution to bring back to the former situation?
Please respond...i am really desperate

OK i figured out how. On my panic i couldn't even think.
God Bless the "search" button!!
But how could i get past this problem with the greek version qtek rom? It is locked and although it lets me upgrade (using the No-ID) on the first reboot after flashing it rebbots all the time.
Any ideas?
Thanks

Yep proteus3000uk,
Get yourself a shipped rom from your own provider. Put your magician into bootloader (camera & power & softreset until it reads serial or usb, there will be no backlight) uncheck usb in the connection settings from activesync on your PC & connect usb. Now it will read usb. Start the shipped rom program.
Or download a dumped or Big Storage rom & follow sd-card
flash method including the copy of your id from (first 420 bytes or so from your own romdump).
Or send it back and pray/beg for warrenty.
First two options are preferred off course. I 'repaired' mine with the first option, while I only had a black screen. So no OS or whatever on the rom.
Goodluck, M

Well i think that the Greek Qtek ROM is the only ROM worldwide that is edited from its programmers to run a phone version check, even after it lets you install it on your phone.
If it finds a phone version other than Qtek (in my case Imate Jam) the phone cant get past the initial splash screen and keeps rebooting for ever!

Then put it into bootloader and flash it wit an i-mate rom. Dumped, shipped or BIG storage and get rid of this Qtek ... rom.
Have you tried anything else than this qtek rom and what were the results?

oltp said:
Then put it into bootloader and flash it wit an i-mate rom. Dumped, shipped or BIG storage and get rid of this Qtek ... rom.
Have you tried anything else than this qtek rom and what were the results?
Click to expand...
Click to collapse
The original english tom (WWE) works just fine (as it should anyway). The thing is i was trying to install the qtek GREEK rom in order to have proper Greek on my phone.
Unfortunately the suckers have locked the greek qtek rom and they have compiled the actual lock into the rom itself.
Although the rom is installed just fine using the No_Id prog, at the first reboot the phone hungs and then reboots for ever!

Please correct me if I'm wrong, but I belief you can actually revert your magician back to the WWE rom and now you want help for unlocking of the Greek qtek rom.
This doesn't sound VERY URGENT to me, cause you can use your device only not in proper Greek, OK?
Can't help you with the unlocking though, maybe Buzz, Anansky or one of the other bright developers can.
Regards, M

oltp said:
Please correct me if I'm wrong, but I belief you can actually revert your magician back to the WWE rom and now you want help for unlocking of the Greek qtek rom.
This doesn't sound VERY URGENT to me, cause you can use your device only not in proper Greek, OK?
Can't help you with the unlocking though, maybe Buzz, Anansky or one of the other bright developers can.
Regards, M
Click to expand...
Click to collapse
If you check my second post you will see that i figured out how to revert back to my original ROM just fine.Som bo prob with that.Please READ before you post.
Thanks

stock on 0% flasahing rom

hello everybody
i started to flash a new rom
Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid V2_1_65.14.06[No_CubeV2]
and i think i followd all the instractions but after starting the flashing it stock on 17% after removing the battery as the program said it wont go over 0%
firs i installed kaiser-HardSPLv1 and after that i started to flash the rom and its not working.
pls tell me what to do to save my nice phone
dannt

speebman said:
hello everybody
i started to flash a new rom
Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid V2_1_65.14.06[No_CubeV2]
and i think i followd all the instractions but after starting the flashing it stock on 17% after removing the battery as the program said it wont go over 0%
firs i installed kaiser-HardSPLv1 and after that i started to flash the rom and its not working.
pls tell me what to do to save my nice phone
dannt
Click to expand...
Click to collapse
"think" you followed all the directions?

sorry for my bad english or leak of knolge in this part of the world i just read so much regarding this subject ant the more i read the more i got confused
so i just sow the first logical faq and followd him, plz i need my phone all my life is in their, help me.
danny

speebman said:
hello everybody
i started to flash a new rom
Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid V2_1_65.14.06[No_CubeV2]
and i think i followd all the instractions but after starting the flashing it stock on 17% after removing the battery as the program said it wont go over 0%
firs i installed kaiser-HardSPLv1 and after that i started to flash the rom and its not working.
pls tell me what to do to save my nice phone
dannt
Click to expand...
Click to collapse
Things that will help others help you:
1. where are you located?
2. who is your provider
3. what ROM WERE you on?
4. ok - you had a phone that was working - and you did:
a. what did you do first?
b. second?
c. etc.
Your message KINDA indicates that you flashed a ROM and had issues - so you THEN flash HARDSPL? was that successful?
Bill

im from israel but my phone is from uk i think, my original rom was the HTC 6.1
i just run the kaiser-HardSPLv1 program and then i started flashing the rom duty 6.1 rom and it stoped at 17% like the program said i removed the batery and started the flashing prosse again but now it doesny even go above 0%, now im stock in the tri color screan
its writen
kais130
spl-3.28.0000
cpld-8
and usb in the littel whait screan

speebman said:
im from israel but my phone is from uk i think, my original rom was the HTC 6.1
i just run the kaiser-HardSPLv1 program and then i started flashing the rom duty 6.1 rom and it stoped at 17% like the program said i removed the batery and started the flashing prosse again but now it doesny even go above 0%, now im stock in the tri color screan
its writen
kais130
spl-3.28.0000
cpld-8
and usb in the littel whait screan
Click to expand...
Click to collapse
you don't have hardSPL installed..! surprise, surprise

u don't have hardspl flashed from bootloader info u provided. flash hardspl be4 flashing any roms.
please search and read; this has been answered many times.
p.s. use the new hardspl by jocky which is a sticky in this forum.

speebman said:
im from israel but my phone is from uk i think, my original rom was the HTC 6.1
i just run the kaiser-HardSPLv1 program and then i started flashing the rom duty 6.1 rom and it stoped at 17% like the program said i removed the batery and started the flashing prosse again but now it doesny even go above 0%, now im stock in the tri color screan
its writen
kais130
spl-3.28.0000
cpld-8
and usb in the littel whait screan
Click to expand...
Click to collapse
OK - I do not think that you got the HARDSPL installed on your phone correctly - BECAUSE - I believe that it would say OLIPOF or JOCKY on it and it does not.
I have not seen the new HARDSPL 328 and 329 but it LOOKS like to me that you did not successfully get the HARDSPL on your phone.
Personally - I would scan the message boards for GSLEON3 (user name) and send him a private message - there are many others that can help you and he or others MAY come trolling by and take pity on you - but at the moment he is the one that helps people in your situation the most from what I have seen.
I would NOT continue to work on it myself as you can definitely mess your phone up permanently. Does your phone still go into boot loader mode? If so - can you flash the required HARDSPL onto your phone?
Find a message that GSLEON3 has left and then lik on his name and send him a private message - he is very nice - BUT - he is VERY busy - continue to be nice and he will most likely get you back and running.
Bill

first of all thank u for the help
but, wich one i need? 28 or 29?
and how do i do this spl if i cant copy them to my device.
danny

speebman said:
first of all thank u for the help
but, wich one i need? 28 or 29?
and how do i do this spl if i cant copy them to my device.
danny
Click to expand...
Click to collapse
Danny -
Deep cleansing breaths here ok?
1. personally - I would PUT BACK what ever you had on your phone and get it running again - trying at this point to get ot to go to a different ROM is not a good idea right at this minute.
2. 28 and 29 from what I read makes no difference - users try each one to see which one works better on THEIR flashed ROM.
3. What I would do is look for the HARDSPL that goes with what you had loaded to begin with - or the actual SPL that came with your original ROM and put that one back.
I would be stuck here because I have to use JUMPSPL on my phone because I get the white screen - but I THINK that (don't quote me because I do not do it this way) if you don't get the white screen you can just flash the HARDSPL to your phone without JUMPSPL (having to be able to copy something to your phone.
HOWEVER - if you cannot or do not know how to continue from reading the WIKI - you MUST request help from a professional - I have already recommended one. (GSLEON3)
Bill

my active sink is not seeing the devais, maby MTTY? wil help

speebman said:
my active sink is not seeing the devais, maby MTTY? wil help
Click to expand...
Click to collapse
Based on your current track record, I wouldn't suggest you use MTTY as you have a VERY HIGH probability of bricking your phone (ie: it won't ever be usable again).

so im fu--.

Can you get the phone into the bootloader mode? Turn the phone off (pull the battery if you have to) then press and hold the camera button while you turn the phone on. You should get to a tri-color screen (this is the boot loader). Now plug in the USB cord and see if it switches from saying Serial to USB. If so, you can try flashing AN OFFICIAL ROM THAT WAS MEANT FOR YOUR PHONE (ie: Don't try to put an offical AT&T rom on an Orange). When you run the RUU program it will tell you that you need to have ActiveSync working, but don't worry about that. If your phone in bootloader shows USB, you can continue on.
BUT AGAIN... You need the Official rom that was meant for your device. Since you are not HardSPL'd you have to do it this way.
If you don't understand any of that, or have questions, don't just try it hoping you get it right...
As stated previously, it would be well worth you time to get someone like GSLEON to assist if you can.

mfrazzz said:
Can you get the phone into the bootloader mode? Turn the phone off (pull the battery if you have to) then press and hold the camera button while you turn the phone on. You should get to a tri-color screen (this is the boot loader). Now plug in the USB cord and see if it switches from saying Serial to USB. If so, you can try flashing AN OFFICIAL ROM THAT WAS MEANT FOR YOUR PHONE (ie: Don't try to put an offical AT&T rom on an Orange). When you run the RUU program it will tell you that you need to have ActiveSync working, but don't worry about that. If your phone in bootloader shows USB, you can continue on.
BUT AGAIN... You need the Official rom that was meant for your device. Since you are not HardSPL'd you have to do it this way.
If you don't understand any of that, or have questions, don't just try it hoping you get it right...
As stated previously, it would be well worth you time to get someone like GSLEON to assist if you can.
Click to expand...
Click to collapse
thank you!!!!!!1
i have flashed to my priviuas rom the original 6.1 htc rom and now its ok!!!
tnk

speebman said:
thank you!!!!!!1
i have flashed to my priviuas rom the original 6.1 htc rom and now its ok!!!
tnk
Click to expand...
Click to collapse
Cool. Glad that worked for you.... NOW, your next task is to read and understand ALL the steps before you try flashing a custom rom. HardSPL that sucker (but understand and follow EVERY step before you try that) and then you should be good to go...

my only problem is that their are so many strings of information and so many threads even wiki is confusing.
i will try to do this after i will make some order it all of this.
tnx again 4 the help
danny

speebman said:
my only problem is that their are so many strings of information and so many threads even wiki is confusing.
i will try to do this after i will make some order it all of this.
tnx again 4 the help
danny
Click to expand...
Click to collapse
Yes it is, but if you read this sticky at the top, it should help (start with noob guide which is the first link I think):
http://forum.xda-developers.com/showthread.php?t=369282

speebman said:
my only problem is that their are so many strings of information and so many threads even wiki is confusing.
i will try to do this after i will make some order it all of this.
tnx again 4 the help
danny
Click to expand...
Click to collapse
Not to be mean but if you have red Wiki and looked at threads here and they "don't make sense to you". You really have no business flashing a rom. If you don't understand what you are doing sooner or later you will brick your phone from your lack of knowledge and it will be no ones fault but your own.
I am really surprised people were willing to repeat what has been typed out hundreds and hundreds of times on these forums.
Welcome to XDA

Reverting to official RUU with HardSPL

I have been searching all over for this but it's probaly right in front of my face. I read that you need to get rid of SPL.nbh from official ROMS before flashing back with HardSPL. The problem is, the official T-Mobile Wing ROM that I downloaded is an .exe file. How do I go about removing the SPL.nbh file since it doesn't display folder contents or anything, just runs the RUU?
Sorry for the double post, I realized I was in the wrong forum

flipside123 said:
I have been searching all over for this but it's probaly right in front of my face. I read that you need to get rid of SPL.nbh from official ROMS before flashing back with HardSPL. The problem is, the official T-Mobile Wing ROM that I downloaded is an .exe file. How do I go about removing the SPL.nbh file since it doesn't display folder contents or anything, just runs the RUU?
Sorry for the double post, I realized I was in the wrong forum
Click to expand...
Click to collapse
I'm uploading a zip file which will have the entire thing already to go.
Just flash your device as you would with any other rom.
Hang tight the link will be available within 10 mins.

Thank you sir. Greatly appreciated

flipside123 said:
Thank you sir. Greatly appreciated
Click to expand...
Click to collapse
Done:
Remove HARD-SPL On The Wing
This is the same tool used to flash your device when it was not HARD-SPL.
I replaced the RUU_Signed file and SPL.nh file already.
It will bring your wing back to the stanard rom as when you first got it.

One more question. I'm looking to keep HardSPL but I have to revert to original to upgrade ROMS don't I? I want to upgrade to your OT 6.5 ROM

flipside123 said:
One more question. I'm looking to keep HardSPL but I have to revert to original to upgrade ROMS don't I? I want to upgrade to your OT 6.5 ROM
Click to expand...
Click to collapse
Okay,
I thought you wanted to go back to the original T-Mobile rom.
If your trying to HARD-SPL your device to install one of my roms or another cooks roms then thats another story.
Please read my FAQ or one of the stickies.

Ok, I think I got it now. So I don't need to revert to the original ROM to flash it since I have HardSPL? Thanks for the help

wen i did this i think i bricked my fone now its at the tmobile screen and it jus staying there

I tried the file that you uploaded here...And it went thru the whole process of flashing the ROM, but after it updated my wing just stays on the T-Mobiel screen and never boots past that.
It had that open touch software on it and I don't want open touch. I want plan old WM 6.0 on there.
I called T-Mobile and got an offical 6.0 update from them, but when I try that one it gets to 1% then says it has a disconneted and I get a connection error.

ttran001 said:
Done:
Remove HARD-SPL On The Wing
This is the same tool used to flash your device when it was not HARD-SPL.
I replaced the RUU_Signed file and SPL.nh file already.
It will bring your wing back to the stanard rom as when you first got it.
Click to expand...
Click to collapse
So does this work? The two people who did this had problems. I need the phone to be all stock so I can have t-mobile send a free replacement because the screen is going on this wing.
***EDIT:*** Oka so this is the same as http://forum.xda-developers.com/showthread.php?t=364543&page=2 the first time I tried it it froze at 15% on step 2 so I installed the RAPI CAB like it says. Step two completed, phone rebooted and had white screen then I got error 260 I think. I have the stock t-mobile rom on it and had it on before I did this but it still has the yang from when I did a hard spl. Is there another way to get it to stock or am I doing something wrong? Plug in phone, let it sync, run herald-uspl.exe hit enter and so forth.
***EDIT*** Ok so this time it completed but is now stuck at the T-Mobile screen and I am now unable to even flash because I can't get past it And that damn yang still shows up in bootloader. Well went into bootloader and flashed from there so phone works but the damn yang is still there. And on a side note: Has anyone ever had a problem with their screen going very dark after flashing a rom from here? Phone was fine then I flashed OTP v7.4 TouchFlo 2D Lite.nbh yesterday and at night screen started going dark, would light up when opened in keyboard mode, then switched and then both were very dark and hard to see. I then flashed to OTP v7.3.1 TouchFlo 2D Final.nbh and still dark. Then I flashed to stock rom and have been able to see the screen since.

This is stupid easy to do... im shocked there isnt a post going into detail.
5 steps to going back.
http://forum.xda-developers.com/showpost.php?p=2998657&postcount=4

smokeingit said:
This is stupid easy to do... im shocked there isnt a post going into detail.
5 steps to going back.
http://forum.xda-developers.com/showpost.php?p=2998657&postcount=4
Click to expand...
Click to collapse
Did not work. Do I need to install the cab files again? I know I deleted a file out of the stock rom so it would not overwrite or verify or something but I put that file back, should I not have? This has been a few weeks and still can't get the yang off. Screen on my girls phone is almost dead, she can't even slide it any more so I need to fix the spl so I can send back to t-mobile....anyone ?

this is what i do to get back to the tmobile orginal. download the software from tmobile. I downloaded the newest update from tmobile site. REMOVE YOUR SD CARD. Connected my phone via usb. Launched the update. It has never failed me yet. It is just like updating your phone. tmobile has to take it, it is their update. They sent me a new phone noproblem, matter of fact i have to do it again, the back on the phone keeps getting loose on me. so they are sending me another phone again. hope this helps.

Alternatively you can use the combination of uspl and stock rom ruu to return your device to stock tmobile rom...
1. Enter in to uspl like you were falshing one of ttran001 roms... You can get this HERALD-USPL-beta3 from http://rapidshare.com/files/79249048/Flash_Center.rar
2. ONLY use steps 1 and 2 from the black screen (getting the white screen on your device)...
3. For step 3 in the flasher exit out of the black screen (windows cmd screen) by pressing ctrl+C...
4. Fire up the official ruu from tmobile found here http://forum.xda-developers.com/showthread.php?t=358030 or alternatively if you have a tmobile account still active you can get the most up to date rom from http://www.t-mobile.com/wmupgrade/
5. Fallow on screen instructions...
6. Back to stock rom...

Brick dopod C858
ttran001 said:
Done:
Remove HARD-SPL On The Wing
This is the same tool used to flash your device when it was not HARD-SPL.
I replaced the RUU_Signed file and SPL.nh file already.
It will bring your wing back to the stanard rom as when you first got it.
Click to expand...
Click to collapse
Hello freind,
I have been downloaded the above "Remove_HARD-SPL_On_The_Wing.rar" files and flash it to my Dopod C858 which has the Chiness language, I suppose to change the language from chinesse to Englis, After flashing the above files, now the phone is only in bootloader mode.
If you start the phone it will stuck on white screen and turn off.
Please help me how to revive my phone back.
Thanks and best regards
Jhemzz

Hey I'm having the same problem as most of these guys who tried the file. The phone just idles on the white Tmobile screen... does anyone know what to do or how to help?
Please and thank you!

angest90 said:
wen i did this i think i bricked my fone now its at the tmobile screen and it jus staying there
Click to expand...
Click to collapse
im having the same problem can anyone help me please?

hotsammysliz said:
im having the same problem can anyone help me please?
Click to expand...
Click to collapse
Being stuck at the Tmobile screen isn't a true brick. Just reflash your ROM. (If you're not HardSPL'd, reflash your RUU.)

Remove Hard SPL from bootloader
Hi,
Anyone out there knows if we can remove hardspl from bootloader of Wing. Problem is my mobile displays splash screen, then switch offs by itself. Its been quite some time that I have hardspled it and have been using it. But recently I am facing this issue, so I am trying to move to original RUU and try if it works.
So for that anyone knows if we can remove hardspl from bootloader, because I am only able to enter bootloader. Moreover I tried several original roms from Flash Center as well as through SD card as well, but still be SPL version is 4.70.yang. Anyone knows any other alternative.
Also, if anyone has faced similar problem then kindly advice how you resolved.
Thanks in advance!
Regards,
Pankaj

My treo 750 wont boot

Hello people!! i've been reading this forum for a loong time and yesterday i decided to register.I really like this forum but i have a problem.
While tryng to flash my 750 it stops in GSM an it doesn't pass that part and now it only starts in the bootloader screen.
The first two parts, are OK, but then stops in GSM.
Is there any way to make it pass? or to make it boot WM again.
I've tried with diferents WM version (2.23, 2.27 an with WM5) but it's the same.
Can someone help me please?
Thanks in advance!!!
Regards!!!

Did you Hard SPL the phone before trying to flash a ROM?

startngate said:
Did you Hard SPL the phone before trying to flash a ROM?
Click to expand...
Click to collapse
Thanks for your answer.
I've been reading about the Hard SLP but it needs an active sync conection, and I can't do that.
I read it from here.
http://forum.xda-developers.com/showthread.php?t=511763&highlight=hard+slp
Is it the right post?
Thanks a lot!!!

thenyboy said:
Thanks for your answer.
I've been reading about the Hard SLP but it needs an active sync conection, and I can't do that.
I read it from here.
http://forum.xda-developers.com/showthread.php?t=511763&highlight=hard+slp
Is it the right post?
Thanks a lot!!!
Click to expand...
Click to collapse
HardSPL is necessary for you to flash to a non-carrier/custom ROM.
If you have the original ROM with you, you can restore the phone from that ROM package.
Whatever the case, do yourself a favor & find someone with a Windows computer & flash the phone from the desktop ROM package.

Ok, but the thing is that my treo won't boot WM so i can't have a conection with active sync and i can't run de upgrade for desktop.I've already tried that and it doesn't connect.
That's my problem.
it only boots on bootloader screen and shows:
Palm Tr
IPL-0.20
Palm Tr
SPL-0.24.0000
Thats why I can't upgrade using the USB method.
Thanks Again!
Regards!

I'm still in the same situation.
is there any way to Hard SLP with and SD card?
Is it possible without using a desktop computer?
Thanks!!

thenyboy said:
I'm still in the same situation.
is there any way to Hard SLP with and SD card?
Is it possible without using a desktop computer?
Thanks!!
Click to expand...
Click to collapse
From the bootloader screen information, it's obvious you had a stock ROM & had not performed HardSPL.
But since your Treo is able to load the bootloader, all it needs is a stock ROM to be flashed using the SD card method.
Search around here for the SD card updating method & the stock SD update file.
Extract the ROM image onto the SD card according to the instructions & you'll be able to flash the stock ROM onto the Treo.
Once you did that, your Treo should be able to boot WM & you can then perform all the other steps needed to flash a cooked/unofficial ROM onto it.

Help please!
..........

Radio 1.58?

Hello, i've got problem with my GPS so i would like to reflash radio. The file i found in "athena upgrading" section doesn't work. It says to me wrong version. Is there a spécific file for X7510?
Thank you very much.

x7510 Radio Download here

Thank you very much Vico!
When i flash radio does it hard reset my system? I mean erase my file?
In your wonderfull rom is radio included?
Thank you.

wernervw said:
When i flash radio does it hard reset my system? I mean erase my file?
Click to expand...
Click to collapse
I really doubt that it does a hard rest. Since its only radio flash, but I haven't tried.
wernervw said:
In your wonderfull rom is radio included?
Click to expand...
Click to collapse
Thnxs for the complement , no its not included in my rom's. The reason is, that theres no points in reflashing radio rom, unless you have a problem, since the OS update does not affect radio.

Need X7510 radio 1.58
Hi Vico, Happy new year, I have problems with my X7510 radio, actually I don´t know how happened but the radio dissappeared and I want to reflash it, I found the link You had with the radio rom but it said that the file is no longer available, Could you give me another link with the radio room?.
Thank you in advance.

CARDOLFO said:
Hi Vico, Happy new year, I have problems with my X7510 radio, actually I don´t know how happened but the radio dissappeared and I want to reflash it, I found the link You had with the radio rom but it said that the file is no longer available, Could you give me another link with the radio room?.
Thank you in advance.
Click to expand...
Click to collapse
Here, Athena radio 1.58 for you

x7510 Radio

Thank you very much, Hakim but I had an id error when I tried to flash the radio you posted me.
Vico thank you too for the quick reply but I had an 262 error when I tried to flash the radio you posted, I had the Hspl 365, do you think that I have to change to the stock one?
Thank you Vico and Hakim
Greetings from Mexico¡¡¡

Do not change spl to stock. Make sure that your device is x7510 NOT x7500 ect.
Make sure you don't have a sd card, and make sure you are in bootloader mode (camera + reset).

Hi Vico, the model is X7510 and I took out the sd card and tried to flash the radio again, It started well but at the 7% it stopped and now appeared a model ID error [244].
Thank you for your help.

Download my one again, and put your device in bootloader mode, make sure you you only have the two files in a folder. i really don't know what else to do, try another computer maybe?, there is also a way of flash a rom by putting it storage. just try Google

hi vico i just flahs your rom WM6.5.3-23153_128DPI_x7510_6.2_VICO, but have not signal on my divice X7510 , i found this tread and relise that ur roms donst have the radio, iam trying to install this radio Athena 1.58 but have a error massage , . i also try to install the X7510 radio without succes, see the pic atach.
thanx for ur help-

Redownad this new radio (might help) if that dosn't work, i have incledud the original 6.1 htc rom. Just make sure you have Hard-spl "3.05-OliNex", make sure you are in bootloader when you flash.
NEW radio x7510 1.58
Original RUU_Athena_HTC_WWE_3.27.405.3_1.58.00.00_Ship
Also make sure you use 7-zip for extracting, just so there are no errors.

thanks for ur answer ,yes i have the bootloader when i flashing and i have Hard-spl "3.05-OliNex" y tryed to install the new radio but dosent let me , it just send me an error update, i will try to install de stock rom 6.1
i wiil let you know what happens, thanks mate.

vrgolin said:
thanks for ur answer ,yes i have the bootloader when i flashing and i have Hard-spl "3.05-OliNex" y tryed to install the new radio but dosent let me , it just send me an error update, i will try to install de stock rom 6.1
i wiil let you know what happens, thanks mate.
Click to expand...
Click to collapse
i give up, i think i have try almost evrething but no succes flashing te new radio, i dont know what the problem was, and the Original RUU_Athena_HTC_WWE_3.27.405.3_1.58.00.00_Ship also didnt let me flash it, always got just 10 % of the instalation and it stuck, after that i got the update error all the time,
thanks for ur help vico, i areciate.

try flashing rom from on board flash.

Vico100 said:
try flashing rom from on board flash.
Click to expand...
Click to collapse
what do you mean with flashing the rom from on board flash? .
what i did. i rename the RUU_signed.nbh to ATHEIMG.nbh i copy to the mini SD an then try to flash the rom in that way from the mini SD, i put the divice in boot loader and right now the screen said .... Loading.... but thats it,. i still dont see any progres.

According to the manual:
III.Select file system and format the MiniSD card to FAT32 mode.
IV.Copy image file XXX.nbh to the micro SD card and rename to ATHEIMG.NBH.
V.Turn the device power off and insert MiniSD card.
VI.Press and hold Power + Camera button, and Reset button to entry Boot loader mode.
VII.Press Power button to start upgrade procedure.
VIII.Reading source code from MiniSD card.
[Note]: This process will takes 15 mins, please don’t power off the device.
IX.After finish, press Reset button to reboot.
So probably make sure its the only file on the sd (and do it exact capital letters ect)

Vico100 said:
According to the manual:
III.Select file system and format the MiniSD card to FAT32 mode.
IV.Copy image file XXX.nbh to the micro SD card and rename to ATHEIMG.NBH.
V.Turn the device power off and insert MiniSD card.
VI.Press and hold Power + Camera button, and Reset button to entry Boot loader mode.
VII.Press Power button to start upgrade procedure.
VIII.Reading source code from MiniSD card.
[Note]: This process will takes 15 mins, please don’t power off the device.
IX.After finish, press Reset button to reboot.
So probably make sure its the only file on the sd (and do it exact capital letters ect)
Click to expand...
Click to collapse
well let me tell u tahat i have 2 divices X7510 the first one:
ROM ver. 3.29.xTep_3_00 wwe
ROM date 01/25/09
Radio ver. n/a ... the divice dosent have radio/ dosent let me install after 7%
IPL-v2. 02
ATHE400
spl-3.05.0000
on this divice dosent let me instal a radio , after 7 % it fail, and when i want to to flash the stock rom from my computer , after 10 % it fail, and i flashed from the SD following the steps u metion here , but nothing hapens after the 3 color bootscreen .
the second divice X7510 :
ROM: WM6.5.3-23153_128DPI_x7510_6.2_VICO
Radio ver. n/a ... the divice dosent have radio/ dosent let me install after 7%
IPL-v2.02
ATHE400
SPL-v3.65. OilNex
i have the same problem on both divice

Hi Vico, thank you again for your support, I downloaded the second file that you upload "X7510 1.58 radio" and I uncompressed it with 7 zip and now I could flash the radio with out problems.
Thanks again for your help and patience¡¡¡
If you need something from Mexico just say it...