Database Info

[QTEK S200] Problem on boot

Hi people! First I want to thank all of you that make a great job on helping and cooking all of these apS for our prophets.
I've looked in the others post for my problem and tried out all of methods explained but nothing helped me.
My problem consist on the boot of my S200. After i made an upgrade to WM6 it stays blocked on the first boot ( QTEK Image ) and stays there until battery goes down. I tried tu upgrade others ROM's by tho BOOTLOADER way but it doesnt work. So I'm completly bypassed by this problem.
If anyone have a solution please post it.
Regards

which roms? ipl spl versions,device model?

Qtek S200 (alias Orange SPV m600)
ipl 2.10.0001
spl 2.20.0001
I first upgrade to WM6 cooked by GULUM, i found it here.
When i wanted to upgrade another version but it doesnt function, until i found Crystal v4.
And now my machine wan't boot, it stays on Qtek screen.

I have the same problem...

Fict it, just installed an older ROM and my htc works again. Gonna try to install a newer ROM now.

TmKing, can you explain your method and the you ROM you used ?
Thank You

I installed this one: Fantastic b4 step1 (got this from this forum)
Now I have WM5 back, I tried to install another ROM, but didn't work. BUt it's too late to do it now, so I 'l try again tomorrow.
Greetz

This also works

TmKing said:
I installed this one: Fantastic b4 step1 (got this from this forum)
Now I have WM5 back, I tried to install another ROM, but didn't work. BUt it's too late to do it now, so I 'l try again tomorrow.
Greetz
Click to expand...
Click to collapse
Have a look to the post 1 in my signature link~~~~~
Enjoy!!!!

Hehe, yes, indeed, I wanted to do everything verry fast. I wasn't aware of the new method to upgrade my HTC.
If you follow the appropriate steps, you will not have this boot problem.

SSPL, USPL Another way to flash *ANY* rom to your device!

Hi all...!
We are working in SSPL and USPL for Pharos device.With them u can Flash any Rom in your device.
And we will release in this thread as soon as possible
cheers..!

GREAT!
we are wait for it!
p.s i'm ready to be a beta-tester
p.s.s do you have WWE rom?

Syrop said:
GREAT!
we are wait for it!
p.s i'm ready to be a beta-tester
p.s.s do you have WWE rom?
Click to expand...
Click to collapse
when uspl, hard spl release.Not only WWE rom.WM6.1 with other languages in plan too

good!
i made russian wm6.1, but can't flash

i wonder why how it's work. wait for release.

Waiting for you
Waiting for you, tom.
Thank you very much!!!

great! thnx for the good work! I'd like a wwe6.1 rom (or dutch)

Will follow up with your great work.

Refuel!Refuel!Refuel! Support

七月流火 said:
Refuel!Refuel!Refuel! Support
Click to expand...
Click to collapse
euuhmmm ?? what??!!??

Any news about the WM6.1 ROM?? I hope in an Italian version

Hey tom waiting for your Rom.......

Ok,
Now another problem.
I managed to upgrade my rom. But after doing so i replace my backup and now it boots but stops in the HTC screen.
I can start it back into bootloader mode, but I cannot reflash it because of the invalid vendor ID error.
How can I fix this ?
or does anyone have the standard Dutch Rom ?
thx in advance..

Same problem here.
Screen with HTC logo freeze and can't flash cause usb connection is lost.

Problem solved.
Do hard reset and fresh Windows screen apprear

wikki said:
Problem solved.
Do hard reset and fresh Windows screen apprear
Click to expand...
Click to collapse
I did a Hard reset by keycombination....
Prob Solved as well

My Pharos is dead. after I Flash rom
After reboot it show htc logo and turn to white screen with a short sound
I can't anything after that
The sync is lost
I hard reset but everything the same
help me a.s.a.p
please
this is rom that i use
htc Pharos (3470) Official ROM 1.11.707.1 from ruchonburi
กระทู้ SSPL & USPL htc 3470 (Pharos)
DIY-1.11-1.0
http://www.pdamobiz.com/show_news.asp?NewsID=144757&PN=1
Thank
[email protected]

thiwat said:
My Pharos is dead. after I Flash rom
After reboot it show htc logo and turn to white screen with a short sound
I can't anything after that
The sync is lost
I hard reset but everything the same
help me a.s.a.p
please
this is rom that i use
htc Pharos (3470) Official ROM 1.11.707.1 from ruchonburi
กระทู้ SSPL & USPL htc 3470 (Pharos)
DIY-1.11-1.0
http://www.pdamobiz.com/show_news.asp?NewsID=144757&PN=1
Thank
[email protected]
Click to expand...
Click to collapse
try this:
turn off the phone, press and hold camera button + green button + power button until bootloader screen appears. At this point plug the usb cable and try to flash official WWE ROM...
Cross the fingers and wait..
bye

removing hardspl

hi guys i installed the 3vloution series rom and when i wish to change it back to the original htc rom it gets disconnected and connected at 14%.. however it hangs at 27%..
help appreciated

Hi @ll,
yes, that behaivior can I confirm. My Snap do the same. A reflash to the EVO rom afterwards works fine...
Any Ideas...how to get the orginal 6.5 back to the Snap?
Thx and regards
Frank

same here
Any solutions in the meantime???

Got it!
Hi,
I found a woking way to go back to the original ROM (and SPL) . But I'm quite sure, that it isn't the easiest way to do that - it killed my nerves and pushed me into desperation in the meantime
Before I was on SPL 1.17 and the flash of original ROM hung at 26%
Sounds crazy, but that's what I did:
1) flashing Hard SPL 1.19
2) flashing Original SPL 1.19 (TriColor Screen showed 1.19 0000)
3) tried to flash Original Snap WM 6.5 ROM GER
=> flash hung at 17%
4) tried to flash 3VO Evolution
=> Error, because of Original SPL
=> not possible to flash Hard SPL, because ActiveSync-Connection is required
At that time desperation grew to panic. NOTHING worked, so I thought I broke it and can't get it to life anymore
5) tried to flash Original Snap WM 6.5 ROM GER again
=> flash hung at 17%
=> at next start I realized that SPL-Version had changed to SPL 1.23 0000
6) tried to flash Original Snap WM 6.5 ROM GER again
=> flash worked and the Snap is back to delivery status
maybe it will work for you too

confused
what did u do?? i have the ssame problem

PRoblem solved!!
just go to jockyw website install the original sslp NOT the HARD sslp
and it should update like normal

xxchapin1ra7xx said:
just go to jockyw website install the original sslp NOT the HARD sslp
and it should update like normal
Click to expand...
Click to collapse
You have a link for his site? I would like to remove the HARDSPL. Thanks.

sikkboy626 said:
You have a link for his site? I would like to remove the HARDSPL. Thanks.
Click to expand...
Click to collapse
Please have a look at the 4th sticky in this forum. It's a little bit hidden but the title is about "HardSPL, Original SPL and JockyW"...
And then I recommend to perform the steps in the order I stated before.
Good Luck!

its on the xda website in the maple rom devlopement
sorry i would post a link but im a new member and new members cant post links

*SOLVED* What Went wrong - Htc Blackstone rom flashing

so i finally did it! i flashed my rom with RUU_Duttys_HD_WM6.5_Sense_2.1_Holy_Grail_R0
BUT when i turned the device on the colors were awful, it is slow and it is stucked all the time , sometimes even the "sense" doesn't want to start my CIM Card is not RECOGNIZED i did a soft reset and a hard one... nothing happens please please any ideas what shall i do now?

Do you have the proper hard spl for the rom? I don't own an hd, but do remember reading that you need an upgraded hard spl for newer roms. It sounds like you have a bad bootloader.

alexander42 said:
so i finally did it! i flashed my rom with RUU_Duttys_HD_WM6.5_Sense_2.1_Holy_Grail_R0
BUT when i turned the device on the colors were awful, it is slow and it is stucked all the time , sometimes even the "sense" doesn't want to start my CIM Card is not RECOGNIZED i did a soft reset and a hard one... nothing happens please please any ideas what shall i do now?
Click to expand...
Click to collapse
Yeah ted is right thats a classic sympton of someone using the wrong hspl/uspl, flash back to a stock rom, read the stickys in the HD rom development section, and upgrade your spl, then flash the rom again and everything should be working fine

ok so i used some different HSPL cuz i didnt find any other for the dutty's, so if i found a normal HSPL (Can you post a link for one sorry?) i shall flash it again ok thanks

alexander42 said:
ok so i used some different HSPL cuz i didnt find any other for the dutty's, so if i found a normal HSPL (Can you post a link for one sorry?) i shall flash it again ok thanks
Click to expand...
Click to collapse
The lastest spl for HD is 1.56 here it is, i assume you know what to do with it

Be careful and make sure it's the right one and you know what you're doing.
Flashing the wrong hard spl is the easiest way to brick a device.

another problem the phone doesn't even want to synch with my comp

Have a deep read here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone
Good luck,

mancsoulja said:
The lastest spl for HD is 1.56 here it is, i assume you know what to do with it
Click to expand...
Click to collapse
Thanks It worked you are awesome!!!

Help...Stuck on Boot screen

I have an old Prophet that refuses to boot to the Operating system. I see the Orange Logo screen with:
IPL 2.20.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.10.1.22
I don't know if (a long time ago) I flashed a G3 phone with a G4 rom or what (would this be the result????).
I have also tried flashing all sorts of ROMs found on this site and even gone onto WIN 6 but it always halts the booting at this screen...
Can anyone help before this phone ends up in the bin!!!!!!!!!!!!!!

First you must flashed an WM5 Rom. Search for Qtek hier and read so many treads about this prob.

Thanks 4 the reply... I will have a go and see what happens.

I have now re-flashed a Qtec rom and still stuck on the boot screen with...
IPL 2.20.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.20.7.34
Is there anyone out there with any idea how to get this phone back from the dead ??????

You have read the wiki ?
http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
You have download and flashed the qtek rom from this side ?
I don`t mean you do that.

NEO130 said:
You have read the wiki ?
http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
You have download and flashed the qtek rom from this side ?
I don`t mean you do that.
Click to expand...
Click to collapse
I have followed the instructions on this site to recover my M600 but it STILL refuses to boot up....
I have tried various ROMs ect to no avail............
Can anyone out there resolve this ?????

Don`t cry like a little girl. What rom exactly have you flashed now ?
http://wiki.xda-developers.com/index.php?pagename=Prophet_ROMs
Are your battery over 50 % to flash ?

Battery is fully charged and the last ROM flashed was:
RUU_Prophet_220734_2207114_024721_NVID.exe
I have also tried this one:
Original-Shipped-ROMs/OrangeUK/Prophet_Orange_UK_ROM.zip
They both have the same result.

You start your phone - bring it in the bootloader modus -connect to pc - flashed the qtec rom you have - If this doesn`t go, I am on the end to help, and you are the first guy it doesn`t go. Sorry
P.S. Dissable Active Sync - Flash only with XP, no VISTA. No USB Hub - If you connect the device you must see in the left down corner USB and than flash

NEO130 said:
You start your phone - bring it in the bootloader modus -connect to pc - flashed the qtec rom you have - If this doesn`t go, I am on the end to help, and you are the first guy it doesn`t go. Sorry
P.S. Dissable Active Sync - Flash only with XP, no VISTA. No USB Hub - If you connect the device you must see in the left down corner USB and than flash
Click to expand...
Click to collapse
NEO.. I have done this and it will still not boot, maybe it's a hardware problem and it is well and truly "bricked"...
Thanks for your help and replies..... I will keep trying...

I had a similar Problem, have you tried a other ROM without IPL/SPL
xtrafletch said:
NEO.. I have done this and it will still not boot, maybe it's a hardware problem and it is well and truly "bricked"...
Thanks for your help and replies..... I will keep trying...
Click to expand...
Click to collapse
Hello there,
I think I had a similar Problem, once I flashed some signed roms via
softspl (Neo Shadow 1.0), everything went okay till then.
I forgot the missing HardSPL on one of my Prophets and
Flashed with RUU Bikertibis 6.5 23007 wich worked fine
after flashing. Even with no hardspl it worked till flashing
the next rom...bricked.
Stucking in bootloader and even the Shiped WWE Rom with NVID
was not working. Stucking in the 3 color screen.
My Prophet was sold as TC-500 from german telekom,
so it had spl 2.56.001 wich only allowed Roms signet
by the vendor, also the NVID Rom you tried didn't worked.
but i kept trying and flashed RUU_Prophet_220739_2207119_021921_QTEK_GER_Ship_NO_IPL_SPL.exe
don't know why, but it booted up with this rom.
After this i made a HardSPL and everthing is fine now.
if i read correct you have SPL 2.20.0001 so use G4 RUU.
Try flashing on XP X68! It's easier this way.
I use XP64 wich works to. disable powersaving
and everthing else what could interfer flashing.
good luck !