Hi people! First I want to thank all of you that make a great job on helping and cooking all of these apS for our prophets.
I've looked in the others post for my problem and tried out all of methods explained but nothing helped me.
My problem consist on the boot of my S200. After i made an upgrade to WM6 it stays blocked on the first boot ( QTEK Image ) and stays there until battery goes down. I tried tu upgrade others ROM's by tho BOOTLOADER way but it doesnt work. So I'm completly bypassed by this problem.
If anyone have a solution please post it.
Regards
which roms? ipl spl versions,device model?
Qtek S200 (alias Orange SPV m600)
ipl 2.10.0001
spl 2.20.0001
I first upgrade to WM6 cooked by GULUM, i found it here.
When i wanted to upgrade another version but it doesnt function, until i found Crystal v4.
And now my machine wan't boot, it stays on Qtek screen.
I have the same problem...
Fict it, just installed an older ROM and my htc works again. Gonna try to install a newer ROM now.
TmKing, can you explain your method and the you ROM you used ?
Thank You
I installed this one: Fantastic b4 step1 (got this from this forum)
Now I have WM5 back, I tried to install another ROM, but didn't work. BUt it's too late to do it now, so I 'l try again tomorrow.
Greetz
This also works
TmKing said:
I installed this one: Fantastic b4 step1 (got this from this forum)
Now I have WM5 back, I tried to install another ROM, but didn't work. BUt it's too late to do it now, so I 'l try again tomorrow.
Greetz
Click to expand...
Click to collapse
Have a look to the post 1 in my signature link~~~~~
Enjoy!!!!
Hehe, yes, indeed, I wanted to do everything verry fast. I wasn't aware of the new method to upgrade my HTC.
If you follow the appropriate steps, you will not have this boot problem.
Related
Guys i did a very stupid thing this evening. I flashed my Imate Jam using the MAupgrade_No ID and the Greek Qtek firmware.
The flashing was good but now my Jam cant go pass the first screen and continuously reboots. It says something about illegal rom used....and reboots
Any solution to bring back to the former situation?
Please respond...i am really desperate
OK i figured out how. On my panic i couldn't even think.
God Bless the "search" button!!
But how could i get past this problem with the greek version qtek rom? It is locked and although it lets me upgrade (using the No-ID) on the first reboot after flashing it rebbots all the time.
Any ideas?
Thanks
Yep proteus3000uk,
Get yourself a shipped rom from your own provider. Put your magician into bootloader (camera & power & softreset until it reads serial or usb, there will be no backlight) uncheck usb in the connection settings from activesync on your PC & connect usb. Now it will read usb. Start the shipped rom program.
Or download a dumped or Big Storage rom & follow sd-card
flash method including the copy of your id from (first 420 bytes or so from your own romdump).
Or send it back and pray/beg for warrenty.
First two options are preferred off course. I 'repaired' mine with the first option, while I only had a black screen. So no OS or whatever on the rom.
Goodluck, M
Well i think that the Greek Qtek ROM is the only ROM worldwide that is edited from its programmers to run a phone version check, even after it lets you install it on your phone.
If it finds a phone version other than Qtek (in my case Imate Jam) the phone cant get past the initial splash screen and keeps rebooting for ever!
Then put it into bootloader and flash it wit an i-mate rom. Dumped, shipped or BIG storage and get rid of this Qtek ... rom.
Have you tried anything else than this qtek rom and what were the results?
oltp said:
Then put it into bootloader and flash it wit an i-mate rom. Dumped, shipped or BIG storage and get rid of this Qtek ... rom.
Have you tried anything else than this qtek rom and what were the results?
Click to expand...
Click to collapse
The original english tom (WWE) works just fine (as it should anyway). The thing is i was trying to install the qtek GREEK rom in order to have proper Greek on my phone.
Unfortunately the suckers have locked the greek qtek rom and they have compiled the actual lock into the rom itself.
Although the rom is installed just fine using the No_Id prog, at the first reboot the phone hungs and then reboots for ever!
Please correct me if I'm wrong, but I belief you can actually revert your magician back to the WWE rom and now you want help for unlocking of the Greek qtek rom.
This doesn't sound VERY URGENT to me, cause you can use your device only not in proper Greek, OK?
Can't help you with the unlocking though, maybe Buzz, Anansky or one of the other bright developers can.
Regards, M
oltp said:
Please correct me if I'm wrong, but I belief you can actually revert your magician back to the WWE rom and now you want help for unlocking of the Greek qtek rom.
This doesn't sound VERY URGENT to me, cause you can use your device only not in proper Greek, OK?
Can't help you with the unlocking though, maybe Buzz, Anansky or one of the other bright developers can.
Regards, M
Click to expand...
Click to collapse
If you check my second post you will see that i figured out how to revert back to my original ROM just fine.Som bo prob with that.Please READ before you post.
Thanks
Hi guys
I know this has been asked a million times before, but trust me, I've tried following the tutorials posted her but with no luck.
So here goes:
I've tried flashing this ROM:
http://rapidshare.com/files/24185105/ruu_vario_aku3.3_3822_382120_026911_tmo_de_ger_ship.zip
via awizard but it stopped so I've unplugged it, got it into bootloader mode and flashed with the xplore WM6 ROM but it just hangs at the boot up screen after restarting.
G3 device
IPL 3.08
SP 3.08
GS 0.269.11
OS 3.8.2.2
Any ideas?
sav_za said:
Hi guys
I know this has been asked a million times before, but trust me, I've tried following the tutorials posted her but with no luck.
So here goes:
I've tried flashing this ROM:
http://rapidshare.com/files/24185105/ruu_vario_aku3.3_3822_382120_026911_tmo_de_ger_ship.zip
via awizard but it stopped so I've unplugged it, got it into bootloader mode and flashed with the xplore WM6 ROM but it just hangs at the boot up screen after restarting.
G3 device
IPL 3.08
SP 3.08
GS 0.269.11
OS 3.8.2.2
Any ideas?
Click to expand...
Click to collapse
Was your wizard CID unlocked ?
I see that you have OS 3.8.2.2 , that is not my OS. It should have been 10.2.0.8.
That means your wizard might have been locked.
Very strange.
I did run CID-unlock first. It was running xplore before I tried flashing the tmobile rom, so maybe the images didn't get flashed.
Anything I can do to fix it?
Okay, I'm busy trying to flash the wizard_love rom. Been sitting at 96% for a while lets hope it goes further.
Okay, the upgrade went through. OS2.26
XDS-dev tutorials and the love rom for the win! Now I can relax again...
Will flash to WM6 soon.
sav_za said:
Okay, the upgrade went through. OS2.26
XDS-dev tutorials and the love rom for the win! Now I can relax again...
Will flash to WM6 soon.
Click to expand...
Click to collapse
Heh. So now that you have found the tutorials helpful, perhaps you'd consider changing the thread title?
--M
Sorry about that, have changed it.
For some reason I can't get it back to WM6 but will try again and keep you guys posted. Device is definitely CID unlocked, but for some reason it keeps hanging at the boot screen.
OKay, assuming my wizard got CID-locked for some reason, how do I downgrade to ver1 to unlock it again?
I've downloaded button's ver1.05 rom. Can I just install it, or will it give me an error saying I need a newer ROM?
Sorry for all the questions, I just don't want to take any chances.
sav_za said:
OKay, assuming my wizard got CID-locked for some reason, how do I downgrade to ver1 to unlock it again?
I've downloaded button's ver1.05 rom. Can I just install it, or will it give me an error saying I need a newer ROM?
Sorry for all the questions, I just don't want to take any chances.
Click to expand...
Click to collapse
Luke....use the Force... Follow the steps in the tutorial link (in my sig.) but the short answer is "yes".
--M
Hehe, thanks I've done that. Will try tomorrow, thanks.
I feel like a bit of a plonker asking so many questions with such obvious answers.
Okay, after a LOT of trial & error I've finally gotten it back to WM6. Here's what I did:
1)Downgraded to IPL/SPL 1.01 using button's ROM
2)CID unlocked using lokiwiz
3)Upgraded to mr_clean AKU2.3
4)Upgraded to Faria's WM6
I didn't use aWizard as usual, just the rom upgrade utilities that came with these ROMS.
Hope this helps anyone that's struggling with the same problems I've been having.
Thanks for the tutorials, they've been a great help. The only part that didn't work for me was upgrading to T-mobile's 2.26 because it would freeze on the bootup screen after upgrading to WM6. Replace that step with mr_clean 2.3 and it works fine.
hey how did you get your wizard_love rom to get past 96% without crashing? mine just gives me error 302, which is ERROR [302~318] : UPDATE ERROR
any clue? thanks
mapleman321 said:
hey how did you get your wizard_love rom to get past 96% without crashing? mine just gives me error 302, which is ? ERROR [302~318] : UPDATE ERROR
any clue? thanks
Click to expand...
Click to collapse
Hi
I got the phone into bootloader mode then it worked fine. It got stuck at 94% iirc but I just left it until it finished.
Hope this helps
Hi everybody,
I made up a new version of pof's USPL for ELFIN based on SPL 2.20.0000. You should be able to flash SPL in the third step now.
Why a new version? Because USPL v1 is only for ELF (64/128MB), but not for ELFIN (128/256MB). Flashing the old ELF SPL in step three on a new ELFIN used to brick your device.
EDIT:
You can find the working release in the following thread:
http://forum.xda-developers.com/showthread.php?p=1964159#post1964159
Thanks to everybody who was willing to test this!
Tempting, tempting.
I still haven't reproduced that weird blue screen i once had on my ELF.
But like i just wrote i got's me an ELF.
Good luck finding resourcefull Gamblers.
If there's no luck just start a Donation round for a Bricked Device Garantee
djvw said:
insane people
Click to expand...
Click to collapse
We have a lot of those in this forum. People trying to flash first and then start reading .
Thanks for trying to get USPL working for the XL users!
ummmmm i just used to use the old uspl v1 and exit after step 3 than flash my rom, if you guys are really keen on testing this my new elfin will be here today or on monday and i will try it with my old one just to piss of rogers
shael said:
ummmmm i just used to use the old uspl v1 and exit after step 3 than flash my rom, if you guys are really keen on testing this my new elfin will be here today or on monday and i will try it with my old one just to piss of rogers
Click to expand...
Click to collapse
This is the kind of brave people we need ;-) Please test it and tell us if it's working as soon as you can. Thank you in advance!
Uploaded new version, please redownload in first post.
Nobody has tested this yet?
I think that a Elfin dopod owner can test this without problems, because if don't work he can flash the complete (and signed) dopod rom from bootloader to restore the original SPL...
http://www.dopodasia.com/download/R...7.1B_4.1.13.51_03.07.90_BLUE_Ship_Reduced.exe
i have a elfin locked on bootloader screen....can change my spl with this??
what ??? the UPSL 1.0 is for Elf only and not Elfin ??? what i dont understand is what do you guys mean quit at step 3 ??? I flashed my Elfin with UPSL 1.0 with all steps for more than 6 times so far and nothing has happen so far ... my SPL is the 2.20.2000 one ...
@jamezco:
that´s wrong.
You flashed those roms containing the USPL (start.bat). They automaticly quit the 3rd step and go directly to the Rom Utility to flash the new ROM.
If you use POF´s USPL v1 and you don´t quit after step 3, the patched Bootloader will be flashed from your devices RAM to the ROM, and this wil brick your ELFin. If you have done this, your actual IPL or SPL would be 1.11.xxx...
Sorry: could someone explain me whether it is strictly needed to use the USPL unlock (the one are treated in this post) to flash the PDA?
I mean: the bootloader in the rom package is not able to do that?
we need some thing to unloack direct from boot loader and no need to active sync
as far as i know this is not possible, cause you can´t access bootloader files...in bootloader mode.
same on pc, you can´t delete or replace files, which are open/inuse by another program...
STRAFALCIONE said:
Sorry: could someone explain me whether it is strictly needed to use the USPL unlock (the one are treated in this post) to flash the PDA?
I mean: the bootloader in the rom package is not able to do that?
Click to expand...
Click to collapse
The Rom Packages u can get here don´t contain a bootloader...and even if they would, the bootloader or the rom would have to match your model ID for flashing it to your device....so yes, it´s stricktly needed to CID unlock to flash Custom ROMs or ROMs with other vendor IDs.
Could someone help me? The USPL is needed for the flashing of ROM, or is it enough the bootloader of the ROM?
Sorry, I missed the answer of the post before
My eyes are crossing after 12 hours in front of the pc
Anyone tested already???
Come on guys,
somebody who can get official Roms from his provider should give this a try...
Hi all, not that i think myself insane but i have tried the USPL for my Elfin 128/256 Touch a few days ago . I have followed the steps and the screen turned white as mentioned by the installer after that it booted up fine again.
Everything seems to be working fine!
However, i have not seen any change to the device..
mb286 said:
Hi all, not that i think myself insane but i have tried the USPL for my Elfin 128/256 Touch a few days ago . I have followed the steps and the screen turned white as mentioned by the installer after that it booted up fine again.
Everything seems to be working fine!
However, i have not seen any change to the device..
Click to expand...
Click to collapse
You don't see any change in the device.... but if USPL works you can flash ANY rom from bootloader directly executing RomUpdateUyility, you don`t need to boot windows, activesync and white screen (temporary SuperCID) to flash, try.....
Go to RUU directory and execute RomUpdateUtlity instead of RUN.bat and see if you can flash any rom without 3% (corrupted) error....
hi guys i installed the 3vloution series rom and when i wish to change it back to the original htc rom it gets disconnected and connected at 14%.. however it hangs at 27%..
help appreciated
Hi @ll,
yes, that behaivior can I confirm. My Snap do the same. A reflash to the EVO rom afterwards works fine...
Any Ideas...how to get the orginal 6.5 back to the Snap?
Thx and regards
Frank
same here
Any solutions in the meantime???
Got it!
Hi,
I found a woking way to go back to the original ROM (and SPL) . But I'm quite sure, that it isn't the easiest way to do that - it killed my nerves and pushed me into desperation in the meantime
Before I was on SPL 1.17 and the flash of original ROM hung at 26%
Sounds crazy, but that's what I did:
1) flashing Hard SPL 1.19
2) flashing Original SPL 1.19 (TriColor Screen showed 1.19 0000)
3) tried to flash Original Snap WM 6.5 ROM GER
=> flash hung at 17%
4) tried to flash 3VO Evolution
=> Error, because of Original SPL
=> not possible to flash Hard SPL, because ActiveSync-Connection is required
At that time desperation grew to panic. NOTHING worked, so I thought I broke it and can't get it to life anymore
5) tried to flash Original Snap WM 6.5 ROM GER again
=> flash hung at 17%
=> at next start I realized that SPL-Version had changed to SPL 1.23 0000
6) tried to flash Original Snap WM 6.5 ROM GER again
=> flash worked and the Snap is back to delivery status
maybe it will work for you too
confused
what did u do?? i have the ssame problem
PRoblem solved!!
just go to jockyw website install the original sslp NOT the HARD sslp
and it should update like normal
xxchapin1ra7xx said:
just go to jockyw website install the original sslp NOT the HARD sslp
and it should update like normal
Click to expand...
Click to collapse
You have a link for his site? I would like to remove the HARDSPL. Thanks.
sikkboy626 said:
You have a link for his site? I would like to remove the HARDSPL. Thanks.
Click to expand...
Click to collapse
Please have a look at the 4th sticky in this forum. It's a little bit hidden but the title is about "HardSPL, Original SPL and JockyW"...
And then I recommend to perform the steps in the order I stated before.
Good Luck!
its on the xda website in the maple rom devlopement
sorry i would post a link but im a new member and new members cant post links
I have an old Prophet that refuses to boot to the Operating system. I see the Orange Logo screen with:
IPL 2.20.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.10.1.22
I don't know if (a long time ago) I flashed a G3 phone with a G4 rom or what (would this be the result????).
I have also tried flashing all sorts of ROMs found on this site and even gone onto WIN 6 but it always halts the booting at this screen...
Can anyone help before this phone ends up in the bin!!!!!!!!!!!!!!
First you must flashed an WM5 Rom. Search for Qtek hier and read so many treads about this prob.
Thanks 4 the reply... I will have a go and see what happens.
I have now re-flashed a Qtec rom and still stuck on the boot screen with...
IPL 2.20.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.20.7.34
Is there anyone out there with any idea how to get this phone back from the dead ??????
You have read the wiki ?
http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
You have download and flashed the qtek rom from this side ?
I don`t mean you do that.
NEO130 said:
You have read the wiki ?
http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
You have download and flashed the qtek rom from this side ?
I don`t mean you do that.
Click to expand...
Click to collapse
I have followed the instructions on this site to recover my M600 but it STILL refuses to boot up....
I have tried various ROMs ect to no avail............
Can anyone out there resolve this ?????
Don`t cry like a little girl. What rom exactly have you flashed now ?
http://wiki.xda-developers.com/index.php?pagename=Prophet_ROMs
Are your battery over 50 % to flash ?
Battery is fully charged and the last ROM flashed was:
RUU_Prophet_220734_2207114_024721_NVID.exe
I have also tried this one:
Original-Shipped-ROMs/OrangeUK/Prophet_Orange_UK_ROM.zip
They both have the same result.
You start your phone - bring it in the bootloader modus -connect to pc - flashed the qtec rom you have - If this doesn`t go, I am on the end to help, and you are the first guy it doesn`t go. Sorry
P.S. Dissable Active Sync - Flash only with XP, no VISTA. No USB Hub - If you connect the device you must see in the left down corner USB and than flash
NEO130 said:
You start your phone - bring it in the bootloader modus -connect to pc - flashed the qtec rom you have - If this doesn`t go, I am on the end to help, and you are the first guy it doesn`t go. Sorry
P.S. Dissable Active Sync - Flash only with XP, no VISTA. No USB Hub - If you connect the device you must see in the left down corner USB and than flash
Click to expand...
Click to collapse
NEO.. I have done this and it will still not boot, maybe it's a hardware problem and it is well and truly "bricked"...
Thanks for your help and replies..... I will keep trying...
I had a similar Problem, have you tried a other ROM without IPL/SPL
xtrafletch said:
NEO.. I have done this and it will still not boot, maybe it's a hardware problem and it is well and truly "bricked"...
Thanks for your help and replies..... I will keep trying...
Click to expand...
Click to collapse
Hello there,
I think I had a similar Problem, once I flashed some signed roms via
softspl (Neo Shadow 1.0), everything went okay till then.
I forgot the missing HardSPL on one of my Prophets and
Flashed with RUU Bikertibis 6.5 23007 wich worked fine
after flashing. Even with no hardspl it worked till flashing
the next rom...bricked.
Stucking in bootloader and even the Shiped WWE Rom with NVID
was not working. Stucking in the 3 color screen.
My Prophet was sold as TC-500 from german telekom,
so it had spl 2.56.001 wich only allowed Roms signet
by the vendor, also the NVID Rom you tried didn't worked.
but i kept trying and flashed RUU_Prophet_220739_2207119_021921_QTEK_GER_Ship_NO_IPL_SPL.exe
don't know why, but it booted up with this rom.
After this i made a HardSPL and everthing is fine now.
if i read correct you have SPL 2.20.0001 so use G4 RUU.
Try flashing on XP X68! It's easier this way.
I use XP64 wich works to. disable powersaving
and everthing else what could interfer flashing.
good luck !