Database Info

Qtek S100 French Upgrade problem

I was doing an Update to my i-mate Jam using ma_cdlsku2_arb_10300_141_10100_ship.exe but something in the middle of the upgrade went wrong, the computer rebooted.
When the computer booted up I tried to update again I turned the i-mate (Qtek S100) up it wont boot completly. I get the blue Imate screen and at the bottom right corner I see in red
NO GSM
D 1.03.00 WWE
and it stops there, I tried to run the MaUpgradeUt.exe and I got Error 120 Country ID ERROR, then I tried QtekS100_FRA_DT_10302_157_10100_For_MDA_T_Mobile.exe but nothing I get the same error.
I hard reset it and I get the USB written on the screen. I tried to run an upgrade but ma_cdlsku2_arb_10300_141_10100_ship.exe gives me error 101 connection problem and I tried QtekS100_FRA_DT_10302_157_10100_For_MDA_T_Mobile.exe and get the Error 120 Country ID error.
Please help what to do ?
Please help.
by the way, I baught this in Dubai, so I am no able to take it back to dealer to fix it. please help :?:

Failing ROM Update Jam. Error 112 CE Failed

Ok I am at the end of my wits here.
I tried to do an Upgrade of my Imate Jam to the latest Rom on the Clubimate site
But it got stuck on the checking site. So after a bit of research I found that if I unplugged and reset it, it should take the upgrade and it looked like it would Except
On the CE update it gets Stuck at 7% and gives me an ERROR 112 CE Update Failed.
I have tried many times to get it too work rebooting each time.
I have tried on 3 different Machines in case it was the USB Hub Problem.
I even tried the S100 rom with the Country code hack and it even got stuck on 7% same error.
Please Help
SciberWolf

sciberwolf said:
Ok I am at the end of my wits here.
I tried to do an Upgrade of my Imate Jam to the latest Rom on the Clubimate site
But it got stuck on the checking site. So after a bit of research I found that if I unplugged and reset it, it should take the upgrade and it looked like it would Except
On the CE update it gets Stuck at 7% and gives me an ERROR 112 CE Update Failed.
I have tried many times to get it too work rebooting each time.
I have tried on 3 different Machines in case it was the USB Hub Problem.
I even tried the S100 rom with the Country code hack and it even got stuck on 7% same error.
Please Help
SciberWolf
Click to expand...
Click to collapse
Could be the rom you downloaded not complete or there is file error. Try download the file again and extract to a new folder.
Check on this page. Use the no ID file to start the flash.
http://forum.xda-developers.com/viewtopic.php?t=18550&start=25
Goodluck.

Thanks for the reply OCMAX but no go
Tried downloading the File again From Clubimate and XDA-Devs FTP no go
Tried with the No ID updater as well but it is still getting stuck at 7%.
The weird thing is it always gets stuck at 7% even if it is another Rom Image.
The only thing I have not tried is the Original Rom image that came with the
Imate Jam because I can’t find it. Anybody have it?
Any other subjections. Im now at 27hours without my PDA not that I’m
Counting
SciberWolf

sciberwolf said:
Thanks for the reply OCMAX but no go
Tried downloading the File again From Clubimate and XDA-Devs FTP no go
Tried with the No ID updater as well but it is still getting stuck at 7%.
The weird thing is it always gets stuck at 7% even if it is another Rom Image.
The only thing I have not tried is the Original Rom image that came with the
Imate Jam because I can’t find it. Anybody have it?
Any other subjections. Im now at 27hours without my PDA not that I’m
Counting
SciberWolf
Click to expand...
Click to collapse
Did you do hard reset the first time you face the 7% error and you are now in the USB v1.0 bootloader mode now?

I had the same problem with a friend's QTEK S100 it was stoping with an upgrade error at the very beggining of the extended ROM flashing no matter which ROM you were flashing to it! At the end they exchanged it for a new one, probably the ROM chip was faulty!

MDA Compact does not open HELP!!
Hello everyone,
I'm new to this board and I read nearly all threads about MDA. I bought my T Mobile MDA Compact 2 weeks ago from Germany. Yesterday while I was trying to change its language to English its locked. I installed Windows 2003 SE then device restarted but not open anymore. Now I can not open it. When I try to open it on the top of the screen it writes "Seial" and at tthe bottom it writes "1.00 Version". What should I do? I need immediate assistant; can anybody help me to make my MDA Compact working again?
Thanks
AE

Upgrading Rom problem

i was trying to upgrade my i-mate jam Rom with RUU172126WWE_imate.exe, but after sometime i got error message and my set gone off, now i cant connect with ActiveSync, using only with Usb wire now i trying to upgrade with so many Rom versions but while upgrading got error message mostly in 2n step, could any one please help me to come out from this problem, i don know what was the actual version of my Rom but my Jam set is made from Taiwan

Getting error everytime
i trying 2 upgrae my PM10A and get everytime Error 112 : CE ROM Update Error so what i do? how can i overcome this problem?????????? any1 can help me out pls??????? i m trying with MA_TMNL_11300_132_11200_Ship.exe with MaUpgradeUt_noID.exe

Upgrading/Downgrading Radio Stack: Error 114

This is driving my crazy.
My Magician (imate Jam) have a radio version 1.13, I wanted to flash the WM6.1 rom but I got the error mentioned in the title.
I've tried almost every other rom that have the radio version 1.12.1 but none worked, always error 114. I've also tried the radio only updates from the ftp but it's the same error (I've tried version other than 1.12.1, including 1.13 the one I have).
My bootloader is version 1.00 if that matters.
- Can anyone give me something else to try?
- Would an SD flash help?

I hate bumping my own threads but I'm really stuck here.
I'm still out of ideas to try. And I couldn't find an SD image that I could try to flash and see if that could help...

Do you have an SD card inserted.
try removing it before you flash.
i just had the same problem and after removing the sd card it went no problem

I do believe that I tried iwth and without a card inserted but I'll give it another shot just to make sure.
Thanks

your device unlocked?

upload C:\RUU.log after attempt.

The device is unlocked.
Flashing any rom works as long as I remove the radio_.nbf file (that applies to the 6.1 rom but obviously it won't run with 1.13 installed).
Otherwise, if I keep the radio file, it just hangs for a couple minute and then exits with the 114 error.
I've attached the log from an attempt to flash your HTCMAG_ROM_WWE_O2 without an SD card inserted in the device. I've renamed the file to txt to be able to attach it.
I really appreciate your help!
Seems like you're becoming the official Magician tech support :0)

Seems like there's no software solution to my issue, I've been seraching nonstop and I found someone on different forums saying that the error I'm getting means that the Flash-ROM cannot be erased and rewritten, so it needs to be repaired (or changed).
Looks I'm suck with what I have. (But please correct me if I'm wrong).
For reference, this is what I'm getting:
17:56:19:455 [err] : RWipe Data Error.
17:56:19:816 [err] : BL UpdateRadio Error.
Click to expand...
Click to collapse

it can be security error also...

Cotulla said:
it can be security error also...
Click to expand...
Click to collapse
If it is a security error, is there anything that can be done??

Error 114 solved for me!!!!
Hello.
I had the same "Error 114" and "Error 113" updating to WWE 04 cotulla rom (thanks a lot for your work!).
The problem was not enought battery!!! The Magician uses the battery in the update process and the USB charge/power supply doesnt work during the proccess, so, if you have low battery power, the rom write/erase cant be done.
I couldnt charge the battery in the Magician after "Error 114", but a friend has another PDA with the same kind of battery and, after a full charge in his PDA and a battery exchange, the update process finished successfully.
I hope this post help somebody.
Best regards.
El Artista.

i've solved the problem installing activesync, leave it opened and uncheck "allow usb connection" in activesync settings

Same problem here ... the batery is to low but !!!! you can charge the batery with the unworking phone:
Plug usb power supply in and remove the batery case on the back. the red light will turn on and the device is loading batery.
Your 6.1 image is flashed now !!! great man ! you rokk

ROM picture Change Error

Well I've tried everything possible, updated device manager fro vista. MDA Vario 3, connects for active sync but after running KaiserCustomRUU.exe. where it update the crrunt ROM version... it changes the screen into 3 color screen , after few minutes in the same condition............ 0% process........ and then........... shows me an error message as under:
ERROR [262]: UPTAE ERROR
The ROM update utility has encountered communication errors during the update process. The program will guide you step-by-
step to recover from the errors so you can continue the update.
and i need to restart MDA. although on recovery process it directly come to normal screen instead of 3 color screen, which means (i guess) it never started changing ROM current picture.
Any help about it plz.
Regards
Iaan

iskhan said:
Well I've tried everything possible, updated device manager fro vista. MDA Vario 3, connects for active sync but after running KaiserCustomRUU.exe. where it update the crrunt ROM version... it changes the screen into 3 color screen , after few minutes in the same condition............ 0% process........ and then........... shows me an error message as under:
ERROR [262]: UPTAE ERROR
The ROM update utility has encountered communication errors during the update process. The program will guide you step-by-
step to recover from the errors so you can continue the update.
and i need to restart MDA. although on recovery process it directly come to normal screen instead of 3 color screen, which means (i guess) it never started changing ROM current picture.
Any help about it plz.
Regards
Iaan
Click to expand...
Click to collapse
First did you do everything in this post?

iskhan said:
Well I've tried everything possible, updated device manager fro vista. MDA Vario 3, connects for active sync but after running KaiserCustomRUU.exe. where it update the crrunt ROM version... it changes the screen into 3 color screen , after few minutes in the same condition............ 0% process........ and then........... shows me an error message as under:
ERROR [262]: UPTAE ERROR
The ROM update utility has encountered communication errors during the update process. The program will guide you step-by-
step to recover from the errors so you can continue the update.
and i need to restart MDA. although on recovery process it directly come to normal screen instead of 3 color screen, which means (i guess) it never started changing ROM current picture.
Any help about it plz.
Regards
Iaan
Click to expand...
Click to collapse
you have vista then your prob better off flashing via sd, also you shouldn't have started a new thread to ask this question, this forum isn't intended for every time someone has a problem and searches and can't find the answer to start a new thread. PM someone you see posting that seems knowledgeable and ask that person if you can't find what you are looking for.

Flashing through SD is always the best. And its a lot safer than USB way.

Thanks for the help guys... closing thread as this issue can be fixed by reading the sticky and also the wiki..
Peace,
Josh