This is driving my crazy.
My Magician (imate Jam) have a radio version 1.13, I wanted to flash the WM6.1 rom but I got the error mentioned in the title.
I've tried almost every other rom that have the radio version 1.12.1 but none worked, always error 114. I've also tried the radio only updates from the ftp but it's the same error (I've tried version other than 1.12.1, including 1.13 the one I have).
My bootloader is version 1.00 if that matters.
- Can anyone give me something else to try?
- Would an SD flash help?
I hate bumping my own threads but I'm really stuck here.
I'm still out of ideas to try. And I couldn't find an SD image that I could try to flash and see if that could help...
Do you have an SD card inserted.
try removing it before you flash.
i just had the same problem and after removing the sd card it went no problem
I do believe that I tried iwth and without a card inserted but I'll give it another shot just to make sure.
Thanks
your device unlocked?
upload C:\RUU.log after attempt.
The device is unlocked.
Flashing any rom works as long as I remove the radio_.nbf file (that applies to the 6.1 rom but obviously it won't run with 1.13 installed).
Otherwise, if I keep the radio file, it just hangs for a couple minute and then exits with the 114 error.
I've attached the log from an attempt to flash your HTCMAG_ROM_WWE_O2 without an SD card inserted in the device. I've renamed the file to txt to be able to attach it.
I really appreciate your help!
Seems like you're becoming the official Magician tech support :0)
Seems like there's no software solution to my issue, I've been seraching nonstop and I found someone on different forums saying that the error I'm getting means that the Flash-ROM cannot be erased and rewritten, so it needs to be repaired (or changed).
Looks I'm suck with what I have. (But please correct me if I'm wrong).
For reference, this is what I'm getting:
17:56:19:455 [err] : RWipe Data Error.
17:56:19:816 [err] : BL UpdateRadio Error.
Click to expand...
Click to collapse
it can be security error also...
Cotulla said:
it can be security error also...
Click to expand...
Click to collapse
If it is a security error, is there anything that can be done??
Error 114 solved for me!!!!
Hello.
I had the same "Error 114" and "Error 113" updating to WWE 04 cotulla rom (thanks a lot for your work!).
The problem was not enought battery!!! The Magician uses the battery in the update process and the USB charge/power supply doesnt work during the proccess, so, if you have low battery power, the rom write/erase cant be done.
I couldnt charge the battery in the Magician after "Error 114", but a friend has another PDA with the same kind of battery and, after a full charge in his PDA and a battery exchange, the update process finished successfully.
I hope this post help somebody.
Best regards.
El Artista.
i've solved the problem installing activesync, leave it opened and uncheck "allow usb connection" in activesync settings
Same problem here ... the batery is to low but !!!! you can charge the batery with the unworking phone:
Plug usb power supply in and remove the batery case on the back. the red light will turn on and the device is loading batery.
Your 6.1 image is flashed now !!! great man ! you rokk
Related
Ok I am at the end of my wits here.
I tried to do an Upgrade of my Imate Jam to the latest Rom on the Clubimate site
But it got stuck on the checking site. So after a bit of research I found that if I unplugged and reset it, it should take the upgrade and it looked like it would Except
On the CE update it gets Stuck at 7% and gives me an ERROR 112 CE Update Failed.
I have tried many times to get it too work rebooting each time.
I have tried on 3 different Machines in case it was the USB Hub Problem.
I even tried the S100 rom with the Country code hack and it even got stuck on 7% same error.
Please Help
SciberWolf
sciberwolf said:
Ok I am at the end of my wits here.
I tried to do an Upgrade of my Imate Jam to the latest Rom on the Clubimate site
But it got stuck on the checking site. So after a bit of research I found that if I unplugged and reset it, it should take the upgrade and it looked like it would Except
On the CE update it gets Stuck at 7% and gives me an ERROR 112 CE Update Failed.
I have tried many times to get it too work rebooting each time.
I have tried on 3 different Machines in case it was the USB Hub Problem.
I even tried the S100 rom with the Country code hack and it even got stuck on 7% same error.
Please Help
SciberWolf
Click to expand...
Click to collapse
Could be the rom you downloaded not complete or there is file error. Try download the file again and extract to a new folder.
Check on this page. Use the no ID file to start the flash.
http://forum.xda-developers.com/viewtopic.php?t=18550&start=25
Goodluck.
Thanks for the reply OCMAX but no go
Tried downloading the File again From Clubimate and XDA-Devs FTP no go
Tried with the No ID updater as well but it is still getting stuck at 7%.
The weird thing is it always gets stuck at 7% even if it is another Rom Image.
The only thing I have not tried is the Original Rom image that came with the
Imate Jam because I can’t find it. Anybody have it?
Any other subjections. Im now at 27hours without my PDA not that I’m
Counting
SciberWolf
sciberwolf said:
Thanks for the reply OCMAX but no go
Tried downloading the File again From Clubimate and XDA-Devs FTP no go
Tried with the No ID updater as well but it is still getting stuck at 7%.
The weird thing is it always gets stuck at 7% even if it is another Rom Image.
The only thing I have not tried is the Original Rom image that came with the
Imate Jam because I can’t find it. Anybody have it?
Any other subjections. Im now at 27hours without my PDA not that I’m
Counting
SciberWolf
Click to expand...
Click to collapse
Did you do hard reset the first time you face the 7% error and you are now in the USB v1.0 bootloader mode now?
I had the same problem with a friend's QTEK S100 it was stoping with an upgrade error at the very beggining of the extended ROM flashing no matter which ROM you were flashing to it! At the end they exchanged it for a new one, probably the ROM chip was faulty!
MDA Compact does not open HELP!!
Hello everyone,
I'm new to this board and I read nearly all threads about MDA. I bought my T Mobile MDA Compact 2 weeks ago from Germany. Yesterday while I was trying to change its language to English its locked. I installed Windows 2003 SE then device restarted but not open anymore. Now I can not open it. When I try to open it on the top of the screen it writes "Seial" and at tthe bottom it writes "1.00 Version". What should I do? I need immediate assistant; can anybody help me to make my MDA Compact working again?
Thanks
AE
I followed AM’s How To on Pocket PC’s PDF file to the letter..
Everything worked fine up until it says 'Download Fail Checksum Fail'
Which is even what it says would happen in the pdf.
So now it just sits there.. i try and do a soft reset it comes straight back to USB v1.00.
I try hard reset same result..
I try all other buttons they do nothing..
So i think ok.. ill put back on my backup that i took from my o2 before i started..
Though i dont how to change my nb1 file into a nbf file.
Little help.. this is no fun at all
I was upgrading my pw10a1 with especial rom for unlock it and process failed at the end, now pda don´t turn on and cant be reconogiced by activesync.
I have also problem, i made backup inside SD card but now don´t know how to restore, or how to upload new rom using serial or usb cable, i have both.
Only shows empty progress bar on display when you plug in the USB base.
PLease!! Help, pda is dead
Sage said:
I followed AM’s How To on Pocket PC’s PDF file to the letter..
Everything worked fine up until it says 'Download Fail Checksum Fail'
Which is even what it says would happen in the pdf.
So now it just sits there.. i try and do a soft reset it comes straight back to USB v1.00.
I try hard reset same result..
I try all other buttons they do nothing..
So i think ok.. ill put back on my backup that i took from my o2 before i started..
Though i dont how to change my nb1 file into a nbf file.
Little help.. this is no fun at all
Click to expand...
Click to collapse
This usually happens when you try to install a corrupt ROM. Your Maigican is stuck in bootlader mode. There is a lot of help about this problem in the forum. Your PDA is not dead ;-)
If I were you I would try copying the ROM to SD and put it back in the PDA. This should make the PDA start downloading the ROM from SD again. If you did BigStorage make sure you replaced the header properly before copying the ROM to SD again.
Please, post some links because i already searched and found nothing clear.
How to revive pw10a1 after rom upgrade failure? Now can enter in Bootloader Wallaby ok, and says GSM ok.
What to do?
uvedovle, I think you'd be better off in the Wallaby forum than the Magician's. You should be able to find more help there. I personally don't know anything about the Wallaby.
thankyou for your reply kta.
ill try again however right now i cant seem to get my pda to turn on..
iam assuming the battery has gone flat..
it wont charge via usb.. if i remove the backcover i get a red light on the pda however the battery is not getting warm so i dont think that is charging it either..
i find it strange that just because it has no ROM on it that it wont charge..
any ideas? thanks again
Hi everyone,
i have a
Prophet G3
IPL 2.09
SPL 2.15.0000
GSM 2.30.21
OS 3.0.0.0
device which i've just updated to the "AKU3.3.12.ASERG-us" rom. This worked perfectly fine. I would however also like to upgrade my radio rom.
So i got myself "Prophet_G3_G4_RadioRom_v2.61.21.exe" and tried to upgrade. Everything looks fine (verifies my phone, then says i've got image version 1.2.0.0 and i can click update and it claims that i will now update from 1.2.0.0 to 2.61.21), but once the RUU starts the update, my Prophet reboots, then displays the Three-Color-Bootloader screen and thats it.
The progress bar on the PC stays at 0% for half a minute, then the updater complains that it has encountered a communications error. My Prophet is not bricked or anything, but it's just not upgrading!
(After pressing reset it boots as usual).
I also tried flashing the latest XDA Neo rom from O2 Germany, and i've got the same three-color-bootloader and it's not flashing.
Can someone please tell me where my mistake is or what i could try?
This problem has been mentioned before, try the search function!
I have searched my ass of for more than an hour for a solution to this problem and didn't find it.
And all you tell me is search. Thank you VERY much. You've been of great help.
EDIT: I've now spent another 25 minutes searching and found ABSOLUTELY nothing that worked or that explained why i have this problem.
Update: I've "solved" it by trying to flash on my Laptop. I have no clue why it worked on the Laptop and not on my PC, but it did.
On my PC only a "USB Device" was found in the bootloader mode and no drivers were available for it. On the Laptop, it was recognized and flashing worked fine.
No idea why. Perhaps the Activesync version (4.5) on my PC was too new ?
Maybe its in a forum,but I have looked everywere.I just sold my S200
(i bought a HD) and the S200 died...... It is in the bootloader and I have tried everything.
1. Pressing all buttons = Format failed
2. Spl can be loaded again, but no with a exe.
3.All roms can be instaled (but not al exe). If a rom installed 1
file (exe) it doest not work. I installed al least 20 rom (wm5,wm6 ect...)
All can be installed and at the end you get 100 % and finished......
I opened the S200 and the button on/of seems to be ok.
4. In the bootloader sceen I get :
IPL2.09.001
SPL 2.G4.4PDA
I am desperared because I am fixing it since a few weeks with....no result.
PLEASE, I NEED SOME HELP
(PD I am from Belgium and living in Spain)
Please need some help ( a lot)
beastmichel said:
Maybe its in a forum,but I have looked everywere.I just sold my S200
(i bought a HD) and the S200 died...... It is in the bootloader and I have tried everything.
1. Pressing all buttons = Format failed
2. Spl can be loaded again, but no with a exe.
3.All roms can be instaled (but not al exe). If a rom installed 1
file (exe) it doest not work. I installed al least 20 rom (wm5,wm6 ect...)
All can be installed and at the end you get 100 % and finished......
I opened the S200 and the button on/of seems to be ok.
4. In the bootloader sceen I get :
IPL2.09.001
SPL 2.G4.4PDA
I am desperared because I am fixing it since a few weeks with....no result.
PLEASE, I NEED SOME HELP
(PD I am from Belgium and living in Spain)
Click to expand...
Click to collapse
Try to flash the NVID from Here http://forum.xda-developers.com/showthread.php?t=353547,
if your Prophet works fine after that, you may flash any rom you like ,
...try to read my thread and....Good luck and
Dear Dioxda2.
Thanks for your comments but I think that I do not understand it all.
My S200 is in the bootlader and I did the following (your manual) :
The pda goes automaticly in the bootloader when on, with the USB words
in the screen :
1.When I try to to inslall a spl , it stays in a green screen with ipl and spl data.Nothing can be installed until baterie is removed
2. Tried to install the NVID but stops ant 80 % with error 326.
3. Tried to install Lazy tool : I put the nbf file in the lib file and install the rom
100 % and I reboot in the bootscreen (fustrating)
4. Tried to insall WM5 and the same like the lazy tool instalation.
Never activesync is connect.That why (I think) that somo roms can not be installed, like a wm5 only os.
Any sugestion ??
beastmichel said:
Dear Dioxda2.
Thanks for your comments but I think that I do not understand it all.
My S200 is in the bootlader and I did the following (your manual) :
The pda goes automaticly in the bootloader when on, with the USB words
in the screen :
1.When I try to to inslall a spl , it stays in a green screen with ipl and spl data.Nothing can be installed until baterie is removed
2. Tried to install the NVID but stops ant 80 % with error 326.
3. Tried to install Lazy tool : I put the nbf file in the lib file and install the rom
100 % and I reboot in the bootscreen (fustrating)
4. Tried to insall WM5 and the same like the lazy tool instalation.
Never activesync is connect.That why (I think) that somo roms can not be installed, like a wm5 only os.
Any sugestion ??
Click to expand...
Click to collapse
1. you may safe your prophet ONLY if you successfully flash the NVID, (just don't look at the connection status between PC and Prophet, as it was forced to bootloader mode, just run the NVID and flash dtraight until it ends, be awared that, NVID needs time to flash, sometimes needs more than 5 minutes, so ... wait for it ! )
2. I hope you can make it or you need to bring your prophet to factory due to abnormal flashing (wrong flashing)...
Good luck
PS.
[size=+3]Lazytool......[/size]
you should place your favourite XXX.nbf file next to the "LazyTool-Start.cmd" or "upgrade.cmd", but [size=+3]NOT[/size] in the LIB folder.... +_+
+_+ +_+ +_+ +_+
too bad (
Dear dioxda2..
i think this is the same problem as my S200 (
mine wasnt on the software prob but hardware...
to: Threadstarter )
try bringing your Mobile to any qualified technician near your place.. something might have been wrong inside... like mine its the comm and cam buttons that are grounded thats why its always in bootloader.. no matter what software i flash its still the same...
hope this helps
Mark
Dear Marekplph,
Can you explain me what do you mean with grounded. Do you mean a
short circuit (negative). Is it dificult and expensive to fix ?
Thanks,very helpfull
dioxda2 said:
Try to flash the NVID from Here http://forum.xda-developers.com/showthread.php?t=353547,
if your Prophet works fine after that, you may flash any rom you like ,
...try to read my thread and....Good luck and
Click to expand...
Click to collapse
I have tried pretty much all the Lazu Guides and prohpet tools.
Most of the time I get the Invalid update tool error.
Maybe the person in this thread has the same problem I have.
I have a G3 Prophet (Qtek S200), that has been flashed with a G4 Rom.
Not it is stuck in tri-color screen and nothing seems to help.
the prohpet tools I downloaded gives me errors and there is little documentation of where to put rom files etc. Maybe you know?
noonas said:
I have tried pretty much all the Lazu Guides and prohpet tools.
Most of the time I get the Invalid update tool error.
Maybe the person in this thread has the same problem I have.
I have a G3 Prophet (Qtek S200), that has been flashed with a G4 Rom.
Not it is stuck in tri-color screen and nothing seems to help.
the prohpet tools I downloaded gives me errors and there is little documentation of where to put rom files etc. Maybe you know?
Click to expand...
Click to collapse
if you want to make a fast move, bring it to the factory....
mess up upgrade code (G3 and G4) ... sorry... doomed.
back again
yes in my country its cheap.. coz something inside short circuited and that keeps my camera button pressed and taking pictures of his own < scary > if you cant fix this try to visit an authorized technician that can fix this for you...
ok, will send the s200 to the SAT (repair). I don´t have other options.
hi
I've an HD2 stuck in the initial splash screen and would greatly appreciate help in how to reload a ROM
I tried reloading the official ROM but the update failed after 9% with error 290
So I thought I'd try HPSL custom ROM approach.
I want to end up with Win7 (I think!) so I was following this thread
I loaded HPSL2 OK
(The 3 colour screen now says
PB81100 HX-BC
SOL-2.08.HPSL 8G XE
0x05
CotullaHSPL 0x40)
I downloaded radio 2.15.50.14 and tried to flash that
HD2 toolkit (Load RUU) produced
Renaming the file LEOIMG.nbh on the SD card seemed to work (it got to 100%) then came up with the message 00018003 LEOIMG.nbh - fail
RADIO_V2 Fail
Update terminate
UPDATE fail
And all I get when I restart is a pretty "software update failed, Try again" message
I can still get the 3 color screen and the PC makes a USB connection but it seems I have to load something else
I was going to try MTTY (from the unbrick an HD2 thread) but when I start MTTY up it does not list USB as a possible connection (I'm on Win7 and there does not seem to be a way to tell activesync (equivalent) not to look at USB)
So I'm out of ideas and cant find a thread that will help. Any suggestions gratefully received
PS: Actually, I would be really happy if I could just get rid of HPSL and restore SPL 1.42 (for warranty reasons)
It seems the normal way is to load a stock ROM but as above, the load sticks in the first bit (when trying to load the radio)
Is there anyway I can cook a ROM to just have SPL in it and flash that (or maybe just not have the radio in it)?
TFAI
PARTIALLY RESOLVED
it seems that HPSL4 allows you to install SPL 2.08 or SPL 3.03 and get rid of HPSL. SO I 'll try that and see if HTC will repair under warranty