Database Info

Upgrading Radio rom

Hi everyone,
i have a
Prophet G3
IPL 2.09
SPL 2.15.0000
GSM 2.30.21
OS 3.0.0.0
device which i've just updated to the "AKU3.3.12.ASERG-us" rom. This worked perfectly fine. I would however also like to upgrade my radio rom.
So i got myself "Prophet_G3_G4_RadioRom_v2.61.21.exe" and tried to upgrade. Everything looks fine (verifies my phone, then says i've got image version 1.2.0.0 and i can click update and it claims that i will now update from 1.2.0.0 to 2.61.21), but once the RUU starts the update, my Prophet reboots, then displays the Three-Color-Bootloader screen and thats it.
The progress bar on the PC stays at 0% for half a minute, then the updater complains that it has encountered a communications error. My Prophet is not bricked or anything, but it's just not upgrading!
(After pressing reset it boots as usual).
I also tried flashing the latest XDA Neo rom from O2 Germany, and i've got the same three-color-bootloader and it's not flashing.
Can someone please tell me where my mistake is or what i could try?

This problem has been mentioned before, try the search function!

I have searched my ass of for more than an hour for a solution to this problem and didn't find it.
And all you tell me is search. Thank you VERY much. You've been of great help.
EDIT: I've now spent another 25 minutes searching and found ABSOLUTELY nothing that worked or that explained why i have this problem.

Update: I've "solved" it by trying to flash on my Laptop. I have no clue why it worked on the Laptop and not on my PC, but it did.
On my PC only a "USB Device" was found in the bootloader mode and no drivers were available for it. On the Laptop, it was recognized and flashing worked fine.
No idea why. Perhaps the Activesync version (4.5) on my PC was too new ?

Palm Treo 750, stuck in bootloader ROM flashing not working

I had to hard reset my palm, as it was stuck at windows screen. It had WM6.
Now it does not go beyond bootloader screen.
Tried, the following
1. Palm recovery tool, connection gets lost
2. Tried ROM flashing with the WM6 ROM (CHEEIMG.nbh) with 2GB Mini SD card with FAT 32 formatting, does not progress, it gets stuck no progress even after one hour.
Not sure what to do next, any help is greatly appreciated.

Hi mohaninusa2003, looks like your waiting for a reply since a while. Here you will find all the answers connected to your issue. Probably you did already but just incase have the link
http://forum.xda-developers.com/showthread.php?t=366771

Thanks hammod2k, I have tried all the suggestions on the thread. Still when flashing the original rom, it does not go beyond Bootloader -ok hans at GSM, left overnight for flashing, still not working.
Tried Mtty, set 14 0/ task 28 55aa /
Tried to flash Hard SPL, bit it is not successful, I am getting an error "Image file is corrupted".
I will keep searching threads and reading..in the meantime.

recovery tool
my friend where i can find the recovery tool? i been looking for it but nothing even on the palm suuport page? thanks in advance
regards from lima
mohaninusa2003 said:
I had to hard reset my palm, as it was stuck at windows screen. It had WM6.
Now it does not go beyond bootloader screen.
Tried, the following
1. Palm recovery tool, connection gets lost
2. Tried ROM flashing with the WM6 ROM (CHEEIMG.nbh) with 2GB Mini SD card with FAT 32 formatting, does not progress, it gets stuck no progress even after one hour.
Not sure what to do next, any help is greatly appreciated.
Click to expand...
Click to collapse

stuck on boot loader
hey mohaninusa2003..
I exactly have the same problem bro..it hangs up on gsm...i tried removing my card and hard resetting it but it just brings me to a tricolored screen red green and blue with the word serial at the bottom...tried soft reset but still the same thing..hope someone could help us on this

Hey fguimet,
Please follow the link and look at post 9 for the file,use the Desptop update method file and extract using winrar to get th file you are looking for. hope it helps,
http://forum.xda-developers.com/showthread.php?p=1714416

Sorry to bother but i have a few questions...i have a 750 treo and none of the support on this website is helping...i am trying to flash my palm 750 but its says the file is corrupted..what do i do about that? Progress only reaches 7% ive used cheetah and kaiser unlockers and i was also wondering if it can be flashed just using the computer and usb in booter mode since it wont go past the palm splash screen...i can access my treo using mtty but doing task 2a doesnt do anything either... I think that maybe my phone is screwed up. I appreciate any help you can offer.

I have almost the same problem with my Palm 750 that I believe locked to Rogers.
1. It hangs on GSM if I use SD card ROM file CHEEIMG.nbh . I have tried many different CHEEIMG.nbh files (ATT, Cingular, ROW…)
2. Running CheetahUnlocker will crush at 7%, and my Palm 750 will reboot and freeze at MS Mobile screen.

I have the same problem, and I think we have to change the IPL and after run cheatunlock.
How can we do it?

on my treo I have hard-spl'd but still i cant manage to flash a rom
My Bootloader screen results:
CHEE100
IPL - 0.20
CHEE100
SPL - 1.40.0liNex
______________________
it starts, gets to about 4-7% and then it says:
|00018003
|CHEEIMG.nbh - FAIL
|
|OS - Fail
|
|
|
|Update Terminate
|UPDATE FAIL
i have no idea what i am doing wrong
it all started when i tried to flash a wm 6.5 os and it didnt work... i was just randomly stuck on the bootloader screen
Swarford

Upgrading/Downgrading Radio Stack: Error 114

This is driving my crazy.
My Magician (imate Jam) have a radio version 1.13, I wanted to flash the WM6.1 rom but I got the error mentioned in the title.
I've tried almost every other rom that have the radio version 1.12.1 but none worked, always error 114. I've also tried the radio only updates from the ftp but it's the same error (I've tried version other than 1.12.1, including 1.13 the one I have).
My bootloader is version 1.00 if that matters.
- Can anyone give me something else to try?
- Would an SD flash help?

I hate bumping my own threads but I'm really stuck here.
I'm still out of ideas to try. And I couldn't find an SD image that I could try to flash and see if that could help...

Do you have an SD card inserted.
try removing it before you flash.
i just had the same problem and after removing the sd card it went no problem

I do believe that I tried iwth and without a card inserted but I'll give it another shot just to make sure.
Thanks

your device unlocked?

upload C:\RUU.log after attempt.

The device is unlocked.
Flashing any rom works as long as I remove the radio_.nbf file (that applies to the 6.1 rom but obviously it won't run with 1.13 installed).
Otherwise, if I keep the radio file, it just hangs for a couple minute and then exits with the 114 error.
I've attached the log from an attempt to flash your HTCMAG_ROM_WWE_O2 without an SD card inserted in the device. I've renamed the file to txt to be able to attach it.
I really appreciate your help!
Seems like you're becoming the official Magician tech support :0)

Seems like there's no software solution to my issue, I've been seraching nonstop and I found someone on different forums saying that the error I'm getting means that the Flash-ROM cannot be erased and rewritten, so it needs to be repaired (or changed).
Looks I'm suck with what I have. (But please correct me if I'm wrong).
For reference, this is what I'm getting:
17:56:19:455 [err] : RWipe Data Error.
17:56:19:816 [err] : BL UpdateRadio Error.
Click to expand...
Click to collapse

it can be security error also...

Cotulla said:
it can be security error also...
Click to expand...
Click to collapse
If it is a security error, is there anything that can be done??

Error 114 solved for me!!!!
Hello.
I had the same "Error 114" and "Error 113" updating to WWE 04 cotulla rom (thanks a lot for your work!).
The problem was not enought battery!!! The Magician uses the battery in the update process and the USB charge/power supply doesnt work during the proccess, so, if you have low battery power, the rom write/erase cant be done.
I couldnt charge the battery in the Magician after "Error 114", but a friend has another PDA with the same kind of battery and, after a full charge in his PDA and a battery exchange, the update process finished successfully.
I hope this post help somebody.
Best regards.
El Artista.

i've solved the problem installing activesync, leave it opened and uncheck "allow usb connection" in activesync settings

Same problem here ... the batery is to low but !!!! you can charge the batery with the unworking phone:
Plug usb power supply in and remove the batery case on the back. the red light will turn on and the device is loading batery.
Your 6.1 image is flashed now !!! great man ! you rokk

"catch-22" Phone don't want let me flash a new ROM, PLEASE HELP!

Hi,
I'm almost broken down :'(
since days I'm trying everything to update the rom of my smartphone with the following operation system "XP and Vista".
I've got a Xda Touch diamond, but Vista says I've got a Touch Diamond P3700. Now let me tell you the catch-22:
I'm connecting the phone via usb cable to the pc(any usb-hub on the back of the pc)
Vista and Xp says "connected". Now I'm running RomUpdateUtility.exe. In the same folder
is the new rom called "DIAMIMG.NBH"
Now I'M clicking "Next" and again "Next". Now he says"verifing the information on your PDA Phone.. Please wait..
After that he says Current Information about you PDA Phone: Image version: 1.93.407.1
So now I'm clicking "update" the new Image version is 1.00.000.0
(If I use another Update Utility he says to Image Version 2.03.207.2)
Clicking "Next" and then again "Next" My Phone turns black and then the phone displays the three-color mode
and below the "serial" change to "usb" and a few
seconds later the phone shows a bar of 0% and on WinXP the bar also shows 0%.
Suddenly the connection is off. And a few minutes later the update Utility(PC) says EROOR(262) UPDATE ERROR.
I even disbaled the standby and hibernation modes on the PC. And I even tried flashing from Internal Storage!
ABsolutly futile! The three-color mode displays DIAM300, SPL-1.30.OliNex, MicroP-Diam (Led) v11,
Psoc_Diam STAGE_PVT v=x32
Is may Phone locked for new roms?
Please HELP ME before I'm going sick ´:__(
Best regards
Colbad

Welcome to forums
Hope this link helps
http://wiki.xda-developers.com/index.php?pagename=HTC_Diamond
Good luck,

nothing helps. I give it up!
I'll get me a new phone.

slow down lol,
dont rush out and get a new phone just yet.... all flashing problems are actually quite simple, you just need to be methodical and patient
Firstly, i always flash with XP, call me old fashioned but its what ive always done lol.
in the past when ive had 262 errors (whilst flashing my touch cruise RIP) the radio i had installed at the time prevented further flashes.
What you havent said is what your current rom is and what rom you are trying to flash.

Hi again
I bought me a new one!
my new htc touch diamond makes me also sick.
If I download from the HTC page the new software rom
there's no problem updating my Smartphone to 100%.
But if I try to use any foreign rom for updating he freezes by 0%.
What is that?
I can't use any foreign rom from other peoples,
I'm absolutly helpless to this issue.
Please help me anybody :=)
Best regards
COLbad

colbad said:
Hi again
I bought me a new one!
my new htc touch diamond makes me also sick.
If I download from the HTC page the new software rom
there's no problem updating my Smartphone to 100%.
But if I try to use any foreign rom for updating he freezes by 0%.
What is that?
I can't use any foreign rom from other peoples,
I'm absolutly helpless to this issue.
Please help me anybody :=)
Best regards
COLbad
Click to expand...
Click to collapse
Colbad,
Please tell me you have read the wiki or at least the stickys on how to flash with either hardspl or uspl etc??
If not ur gonna end up with a fancy looking brick.... what have you tried so far and from where?

sorry for bothering you.
I solved the issue finally
Now everythings fine.

[Q] RUU Error 262 on 31%

Hi guys,
i already read other threads in this and other forums about the same problem, but i couldnt find what i'm looking for, so i hope you can help me.
I wanted to Install an old Stock ROM on my Polaris (Had pcarvalho's extreme rom before - so you see, i already did hard spl).
But everytime it got stuck on 31% with the error 262 - update error.
I already...
- did a soft-reset
- did a hard-reset (But it still goes back to bootloader -> four-colour-screen)
- rebootet my pc,
- reinstalled mobile device center (because i'm on Win 7),
- switched to an other PC with windows xp and active sync,
- reinstalled active sync on this pc,
- re-downloaded the package and tried another package.
But still the same Problem: Stuck in Bootloader, error on 31%
What could it be and can it be fixed? Please help me, i dont want to buy a new phone
thanks...

Sorry guys, after searching the whole night, i found another thread for mtty (i found a thread before with a process described that does not help).
finally this helped: http://forum.xda-developers.com/showthread.php?t=425922
BUT: My Problem is still there. If I try to reinstall the stock rom it gets stuck on 31%
Someone know why or what it is?

Baxter. said:
Sorry guys, after searching the whole night, i found another thread for mtty (i found a thread before with a process described that does not help).
finally this helped: http://forum.xda-developers.com/showthread.php?t=425922
BUT: My Problem is still there. If I try to reinstall the stock rom it gets stuck on 31%
Someone know why or what it is?
Click to expand...
Click to collapse
I think that error occurs because you have not unlocked the phone on when you flash ROM, right ...? about Windows what you use on computers is not a problem, like Windows XP or 7 all fine! >>>HR<<<

if you did update the radio (1.65.xx), you must first downgrade radio1.58.xx or older) and you'll go