Database Info

Failing ROM Update Jam. Error 112 CE Failed

Ok I am at the end of my wits here.
I tried to do an Upgrade of my Imate Jam to the latest Rom on the Clubimate site
But it got stuck on the checking site. So after a bit of research I found that if I unplugged and reset it, it should take the upgrade and it looked like it would Except
On the CE update it gets Stuck at 7% and gives me an ERROR 112 CE Update Failed.
I have tried many times to get it too work rebooting each time.
I have tried on 3 different Machines in case it was the USB Hub Problem.
I even tried the S100 rom with the Country code hack and it even got stuck on 7% same error.
Please Help
SciberWolf

sciberwolf said:
Ok I am at the end of my wits here.
I tried to do an Upgrade of my Imate Jam to the latest Rom on the Clubimate site
But it got stuck on the checking site. So after a bit of research I found that if I unplugged and reset it, it should take the upgrade and it looked like it would Except
On the CE update it gets Stuck at 7% and gives me an ERROR 112 CE Update Failed.
I have tried many times to get it too work rebooting each time.
I have tried on 3 different Machines in case it was the USB Hub Problem.
I even tried the S100 rom with the Country code hack and it even got stuck on 7% same error.
Please Help
SciberWolf
Click to expand...
Click to collapse
Could be the rom you downloaded not complete or there is file error. Try download the file again and extract to a new folder.
Check on this page. Use the no ID file to start the flash.
http://forum.xda-developers.com/viewtopic.php?t=18550&start=25
Goodluck.

Thanks for the reply OCMAX but no go
Tried downloading the File again From Clubimate and XDA-Devs FTP no go
Tried with the No ID updater as well but it is still getting stuck at 7%.
The weird thing is it always gets stuck at 7% even if it is another Rom Image.
The only thing I have not tried is the Original Rom image that came with the
Imate Jam because I can’t find it. Anybody have it?
Any other subjections. Im now at 27hours without my PDA not that I’m
Counting
SciberWolf

sciberwolf said:
Thanks for the reply OCMAX but no go
Tried downloading the File again From Clubimate and XDA-Devs FTP no go
Tried with the No ID updater as well but it is still getting stuck at 7%.
The weird thing is it always gets stuck at 7% even if it is another Rom Image.
The only thing I have not tried is the Original Rom image that came with the
Imate Jam because I can’t find it. Anybody have it?
Any other subjections. Im now at 27hours without my PDA not that I’m
Counting
SciberWolf
Click to expand...
Click to collapse
Did you do hard reset the first time you face the 7% error and you are now in the USB v1.0 bootloader mode now?

I had the same problem with a friend's QTEK S100 it was stoping with an upgrade error at the very beggining of the extended ROM flashing no matter which ROM you were flashing to it! At the end they exchanged it for a new one, probably the ROM chip was faulty!

MDA Compact does not open HELP!!
Hello everyone,
I'm new to this board and I read nearly all threads about MDA. I bought my T Mobile MDA Compact 2 weeks ago from Germany. Yesterday while I was trying to change its language to English its locked. I installed Windows 2003 SE then device restarted but not open anymore. Now I can not open it. When I try to open it on the top of the screen it writes "Seial" and at tthe bottom it writes "1.00 Version". What should I do? I need immediate assistant; can anybody help me to make my MDA Compact working again?
Thanks
AE

Upgrading Radio rom

Hi everyone,
i have a
Prophet G3
IPL 2.09
SPL 2.15.0000
GSM 2.30.21
OS 3.0.0.0
device which i've just updated to the "AKU3.3.12.ASERG-us" rom. This worked perfectly fine. I would however also like to upgrade my radio rom.
So i got myself "Prophet_G3_G4_RadioRom_v2.61.21.exe" and tried to upgrade. Everything looks fine (verifies my phone, then says i've got image version 1.2.0.0 and i can click update and it claims that i will now update from 1.2.0.0 to 2.61.21), but once the RUU starts the update, my Prophet reboots, then displays the Three-Color-Bootloader screen and thats it.
The progress bar on the PC stays at 0% for half a minute, then the updater complains that it has encountered a communications error. My Prophet is not bricked or anything, but it's just not upgrading!
(After pressing reset it boots as usual).
I also tried flashing the latest XDA Neo rom from O2 Germany, and i've got the same three-color-bootloader and it's not flashing.
Can someone please tell me where my mistake is or what i could try?

This problem has been mentioned before, try the search function!

I have searched my ass of for more than an hour for a solution to this problem and didn't find it.
And all you tell me is search. Thank you VERY much. You've been of great help.
EDIT: I've now spent another 25 minutes searching and found ABSOLUTELY nothing that worked or that explained why i have this problem.

Update: I've "solved" it by trying to flash on my Laptop. I have no clue why it worked on the Laptop and not on my PC, but it did.
On my PC only a "USB Device" was found in the bootloader mode and no drivers were available for it. On the Laptop, it was recognized and flashing worked fine.
No idea why. Perhaps the Activesync version (4.5) on my PC was too new ?

ROM picture Change Error

Well I've tried everything possible, updated device manager fro vista. MDA Vario 3, connects for active sync but after running KaiserCustomRUU.exe. where it update the crrunt ROM version... it changes the screen into 3 color screen , after few minutes in the same condition............ 0% process........ and then........... shows me an error message as under:
ERROR [262]: UPTAE ERROR
The ROM update utility has encountered communication errors during the update process. The program will guide you step-by-
step to recover from the errors so you can continue the update.
and i need to restart MDA. although on recovery process it directly come to normal screen instead of 3 color screen, which means (i guess) it never started changing ROM current picture.
Any help about it plz.
Regards
Iaan

iskhan said:
Well I've tried everything possible, updated device manager fro vista. MDA Vario 3, connects for active sync but after running KaiserCustomRUU.exe. where it update the crrunt ROM version... it changes the screen into 3 color screen , after few minutes in the same condition............ 0% process........ and then........... shows me an error message as under:
ERROR [262]: UPTAE ERROR
The ROM update utility has encountered communication errors during the update process. The program will guide you step-by-
step to recover from the errors so you can continue the update.
and i need to restart MDA. although on recovery process it directly come to normal screen instead of 3 color screen, which means (i guess) it never started changing ROM current picture.
Any help about it plz.
Regards
Iaan
Click to expand...
Click to collapse
First did you do everything in this post?

iskhan said:
Well I've tried everything possible, updated device manager fro vista. MDA Vario 3, connects for active sync but after running KaiserCustomRUU.exe. where it update the crrunt ROM version... it changes the screen into 3 color screen , after few minutes in the same condition............ 0% process........ and then........... shows me an error message as under:
ERROR [262]: UPTAE ERROR
The ROM update utility has encountered communication errors during the update process. The program will guide you step-by-
step to recover from the errors so you can continue the update.
and i need to restart MDA. although on recovery process it directly come to normal screen instead of 3 color screen, which means (i guess) it never started changing ROM current picture.
Any help about it plz.
Regards
Iaan
Click to expand...
Click to collapse
you have vista then your prob better off flashing via sd, also you shouldn't have started a new thread to ask this question, this forum isn't intended for every time someone has a problem and searches and can't find the answer to start a new thread. PM someone you see posting that seems knowledgeable and ask that person if you can't find what you are looking for.

Flashing through SD is always the best. And its a lot safer than USB way.

Thanks for the help guys... closing thread as this issue can be fixed by reading the sticky and also the wiki..
Peace,
Josh

[HELP] Acer s200 update rom fail

I have try to flash the unofficial rom. However, the phone rebooted during the update process. Now, my Acer s200 only can display the splash screen and cannot go into windows...
Anyways can flash the rom again?? I tried to use Acer_EUU.exe, but it need to detect the phone by Activesync. Anyways can flash the rom bypass activesync?

Some problem....

Hi!
I tried to flash from original EN ROM version on RU version and had the same problem - the device displayed Windows splash screen and then just reboot. So, I was confused but I didn't stop this process and after half an hour Windows loaded...(during this time I removed he battery and pushed soft-reset button a lotof times).
So, my only advice is to try to wait with re-booting device till the Windows boot and then to flash the original ROM (if you'll find it).
For me - after I loaded RU version of Windows I just flashed for custom EN ROM and it was OK (without this issue).
Good Luck!

It solves your problem..
DimICE said:
Hacked ACER_EUU.exe
Link: http://www.mediafire.com/?wy2yynnjz2z
ActiveSync connection is not needed!
Also is not needed to edit version.txt..
Just replace original ACER_EUU.exe with this file, execute it. Press next,next,ok,ok.. Message "Waiting for download mode coming" appear..
Power your Acer s200 with Power+Camera buttons pressed and connect to computer.
Tested on 2 acer s200 phones
Sorry for my English)))
Click to expand...
Click to collapse

link not working ( http://www.mediafire.com/?wy2yynnjz2z )

http://dimice.ru/ACER_EUU.exe

Rom update can be computer's fault
DimIce's program works perfectly. I've thought I bricked my phone many times, but always have been able to recover. This is what I recently discovered. In the middle of a flash, my computer said "write error". 'Thought my phone would stay dead. Finally, I switched to another computer and flashed the phone with no problem. So if you suffer a bad flash, simply change computers. If none is available, reboot your computer to clear the memory, etc. (by the way I'm using Windows 7 x64) and try again - sometimes even changing the USB port might help. The phone excels in it's ability to be re-flashed -even if you suffer disaster in the middle of a procedure.

As we dedicate only to HTC devices you won´t get too much attention.
Better try here:
http://www.eten-users.eu/
Good luck,

orb3000 said:
As we dedicate only to HTC devices you won´t get too much attention.
Better try here:
http://www.eten-users.eu/
Good luck,
Click to expand...
Click to collapse
Ignore this guy he has a bot setup for posting this on everyone that has 1 post or is posting in general or Upgrading, Modifying and Unlocking, You need to flash a rom based of the 1.00 oem drivers, flash this rom: http://forum.xda-developers.com/showthread.php?t=596304 and all of your problems will be solved, if not let me know and il help you out.

rafyvitto said:
Ignore this guy he has a bot setup for posting this on everyone that has 1 post or is posting in general or Upgrading, Modifying and Unlocking, You need to flash a rom based of the 1.00 oem drivers, flash this rom: http://forum.xda-developers.com/showthread.php?t=596304 and all of your problems will be solved, if not let me know and il help you out.
Click to expand...
Click to collapse
If you have any problem please take it to the council.
my only intention is to let new members know that this is an HTC forum only!
So they don't waste their time
If that bothers you, shame...

XDA has never meant to be HTC only.
Just open your eyes, dear sir.

I have a problem with the installation romu message pops up to me(sorry acer usb host driver must be installed in windows xp sp2 or later version please update os version to windows sp2)

stuck on clean boot screen
Hi, i was updating from EUU_Acer_S200_3.003b.00_EN_03.03.08_3.003.01_20100119 to EUU_Acer_S200_3.003c.00_ES_03.03.08_3.003c.00_20100201 but accidentally closed the acer's application, so the phone is stuck on "clean boot" screen? what should i do?, thank you!

My Treo 750 wont upgrade

Hello. I had a Treo 750 with the original os. After finding out the windows mobile 6.5 version that you guys had i tried it and it worked.
Well.. i saw another one that i thought was cooler... htc like and tried it on, i have installed using usb method and the installation went well. After I rebooted I got a 3 coloured screen.
Ever since that i have tried every method i could found, i tried flashing rom using mtty command
set 14 0
task 28
tas 0
than I installed the 6.5 version using my sd card. It all goes well untill at some point I get this on the screen:
CHEEIMG.nbh
SPLASH1 - OK
BOOTLOADER - OK
GSM - OK
MicroP - OK
EXTROM - OK
OS - Fail
Update Terminate
UPDATE FAIL
Any other CHEEIMG.nbh file i try i get the same error -.-
In some topic I saw that in this case I had to flash using the original rom, I have a Cingular device from the US (im not in the us), was a ATT rom that I have seen posted in the forum.
If I update this 6.5 CHEEIMG.nbh using the complete fix kit through usb it stops everytime in different percentages. It got stuck on 12% , 53% and others but never finishes..
I have also tried the original rom through cable mode using complete fix kit and it sais the CHEEIMG.nbh file is corrupted ...
Im about to loose my patience since i've been on this for days... can anyone give me a hand?
By The way Merry Chrystmas to you all