Hello. I had a Treo 750 with the original os. After finding out the windows mobile 6.5 version that you guys had i tried it and it worked.
Well.. i saw another one that i thought was cooler... htc like and tried it on, i have installed using usb method and the installation went well. After I rebooted I got a 3 coloured screen.
Ever since that i have tried every method i could found, i tried flashing rom using mtty command
set 14 0
task 28
tas 0
than I installed the 6.5 version using my sd card. It all goes well untill at some point I get this on the screen:
CHEEIMG.nbh
SPLASH1 - OK
BOOTLOADER - OK
GSM - OK
MicroP - OK
EXTROM - OK
OS - Fail
Update Terminate
UPDATE FAIL
Any other CHEEIMG.nbh file i try i get the same error -.-
In some topic I saw that in this case I had to flash using the original rom, I have a Cingular device from the US (im not in the us), was a ATT rom that I have seen posted in the forum.
If I update this 6.5 CHEEIMG.nbh using the complete fix kit through usb it stops everytime in different percentages. It got stuck on 12% , 53% and others but never finishes..
I have also tried the original rom through cable mode using complete fix kit and it sais the CHEEIMG.nbh file is corrupted ...
Im about to loose my patience since i've been on this for days... can anyone give me a hand?
By The way Merry Chrystmas to you all
Related
Ok I am at the end of my wits here.
I tried to do an Upgrade of my Imate Jam to the latest Rom on the Clubimate site
But it got stuck on the checking site. So after a bit of research I found that if I unplugged and reset it, it should take the upgrade and it looked like it would Except
On the CE update it gets Stuck at 7% and gives me an ERROR 112 CE Update Failed.
I have tried many times to get it too work rebooting each time.
I have tried on 3 different Machines in case it was the USB Hub Problem.
I even tried the S100 rom with the Country code hack and it even got stuck on 7% same error.
Please Help
SciberWolf
sciberwolf said:
Ok I am at the end of my wits here.
I tried to do an Upgrade of my Imate Jam to the latest Rom on the Clubimate site
But it got stuck on the checking site. So after a bit of research I found that if I unplugged and reset it, it should take the upgrade and it looked like it would Except
On the CE update it gets Stuck at 7% and gives me an ERROR 112 CE Update Failed.
I have tried many times to get it too work rebooting each time.
I have tried on 3 different Machines in case it was the USB Hub Problem.
I even tried the S100 rom with the Country code hack and it even got stuck on 7% same error.
Please Help
SciberWolf
Click to expand...
Click to collapse
Could be the rom you downloaded not complete or there is file error. Try download the file again and extract to a new folder.
Check on this page. Use the no ID file to start the flash.
http://forum.xda-developers.com/viewtopic.php?t=18550&start=25
Goodluck.
Thanks for the reply OCMAX but no go
Tried downloading the File again From Clubimate and XDA-Devs FTP no go
Tried with the No ID updater as well but it is still getting stuck at 7%.
The weird thing is it always gets stuck at 7% even if it is another Rom Image.
The only thing I have not tried is the Original Rom image that came with the
Imate Jam because I can’t find it. Anybody have it?
Any other subjections. Im now at 27hours without my PDA not that I’m
Counting
SciberWolf
sciberwolf said:
Thanks for the reply OCMAX but no go
Tried downloading the File again From Clubimate and XDA-Devs FTP no go
Tried with the No ID updater as well but it is still getting stuck at 7%.
The weird thing is it always gets stuck at 7% even if it is another Rom Image.
The only thing I have not tried is the Original Rom image that came with the
Imate Jam because I can’t find it. Anybody have it?
Any other subjections. Im now at 27hours without my PDA not that I’m
Counting
SciberWolf
Click to expand...
Click to collapse
Did you do hard reset the first time you face the 7% error and you are now in the USB v1.0 bootloader mode now?
I had the same problem with a friend's QTEK S100 it was stoping with an upgrade error at the very beggining of the extended ROM flashing no matter which ROM you were flashing to it! At the end they exchanged it for a new one, probably the ROM chip was faulty!
MDA Compact does not open HELP!!
Hello everyone,
I'm new to this board and I read nearly all threads about MDA. I bought my T Mobile MDA Compact 2 weeks ago from Germany. Yesterday while I was trying to change its language to English its locked. I installed Windows 2003 SE then device restarted but not open anymore. Now I can not open it. When I try to open it on the top of the screen it writes "Seial" and at tthe bottom it writes "1.00 Version". What should I do? I need immediate assistant; can anybody help me to make my MDA Compact working again?
Thanks
AE
I had to hard reset my palm, as it was stuck at windows screen. It had WM6.
Now it does not go beyond bootloader screen.
Tried, the following
1. Palm recovery tool, connection gets lost
2. Tried ROM flashing with the WM6 ROM (CHEEIMG.nbh) with 2GB Mini SD card with FAT 32 formatting, does not progress, it gets stuck no progress even after one hour.
Not sure what to do next, any help is greatly appreciated.
Hi mohaninusa2003, looks like your waiting for a reply since a while. Here you will find all the answers connected to your issue. Probably you did already but just incase have the link
http://forum.xda-developers.com/showthread.php?t=366771
Thanks hammod2k, I have tried all the suggestions on the thread. Still when flashing the original rom, it does not go beyond Bootloader -ok hans at GSM, left overnight for flashing, still not working.
Tried Mtty, set 14 0/ task 28 55aa /
Tried to flash Hard SPL, bit it is not successful, I am getting an error "Image file is corrupted".
I will keep searching threads and reading..in the meantime.
recovery tool
my friend where i can find the recovery tool? i been looking for it but nothing even on the palm suuport page? thanks in advance
regards from lima
mohaninusa2003 said:
I had to hard reset my palm, as it was stuck at windows screen. It had WM6.
Now it does not go beyond bootloader screen.
Tried, the following
1. Palm recovery tool, connection gets lost
2. Tried ROM flashing with the WM6 ROM (CHEEIMG.nbh) with 2GB Mini SD card with FAT 32 formatting, does not progress, it gets stuck no progress even after one hour.
Not sure what to do next, any help is greatly appreciated.
Click to expand...
Click to collapse
stuck on boot loader
hey mohaninusa2003..
I exactly have the same problem bro..it hangs up on gsm...i tried removing my card and hard resetting it but it just brings me to a tricolored screen red green and blue with the word serial at the bottom...tried soft reset but still the same thing..hope someone could help us on this
Hey fguimet,
Please follow the link and look at post 9 for the file,use the Desptop update method file and extract using winrar to get th file you are looking for. hope it helps,
http://forum.xda-developers.com/showthread.php?p=1714416
Sorry to bother but i have a few questions...i have a 750 treo and none of the support on this website is helping...i am trying to flash my palm 750 but its says the file is corrupted..what do i do about that? Progress only reaches 7% ive used cheetah and kaiser unlockers and i was also wondering if it can be flashed just using the computer and usb in booter mode since it wont go past the palm splash screen...i can access my treo using mtty but doing task 2a doesnt do anything either... I think that maybe my phone is screwed up. I appreciate any help you can offer.
I have almost the same problem with my Palm 750 that I believe locked to Rogers.
1. It hangs on GSM if I use SD card ROM file CHEEIMG.nbh . I have tried many different CHEEIMG.nbh files (ATT, Cingular, ROW…)
2. Running CheetahUnlocker will crush at 7%, and my Palm 750 will reboot and freeze at MS Mobile screen.
I have the same problem, and I think we have to change the IPL and after run cheatunlock.
How can we do it?
on my treo I have hard-spl'd but still i cant manage to flash a rom
My Bootloader screen results:
CHEE100
IPL - 0.20
CHEE100
SPL - 1.40.0liNex
______________________
it starts, gets to about 4-7% and then it says:
|00018003
|CHEEIMG.nbh - FAIL
|
|OS - Fail
|
|
|
|Update Terminate
|UPDATE FAIL
i have no idea what i am doing wrong
it all started when i tried to flash a wm 6.5 os and it didnt work... i was just randomly stuck on the bootloader screen
Swarford
Hi guys,
i already read other threads in this and other forums about the same problem, but i couldnt find what i'm looking for, so i hope you can help me.
I wanted to Install an old Stock ROM on my Polaris (Had pcarvalho's extreme rom before - so you see, i already did hard spl).
But everytime it got stuck on 31% with the error 262 - update error.
I already...
- did a soft-reset
- did a hard-reset (But it still goes back to bootloader -> four-colour-screen)
- rebootet my pc,
- reinstalled mobile device center (because i'm on Win 7),
- switched to an other PC with windows xp and active sync,
- reinstalled active sync on this pc,
- re-downloaded the package and tried another package.
But still the same Problem: Stuck in Bootloader, error on 31%
What could it be and can it be fixed? Please help me, i dont want to buy a new phone
thanks...
Sorry guys, after searching the whole night, i found another thread for mtty (i found a thread before with a process described that does not help).
finally this helped: http://forum.xda-developers.com/showthread.php?t=425922
BUT: My Problem is still there. If I try to reinstall the stock rom it gets stuck on 31%
Someone know why or what it is?
Baxter. said:
Sorry guys, after searching the whole night, i found another thread for mtty (i found a thread before with a process described that does not help).
finally this helped: http://forum.xda-developers.com/showthread.php?t=425922
BUT: My Problem is still there. If I try to reinstall the stock rom it gets stuck on 31%
Someone know why or what it is?
Click to expand...
Click to collapse
I think that error occurs because you have not unlocked the phone on when you flash ROM, right ...? about Windows what you use on computers is not a problem, like Windows XP or 7 all fine! >>>HR<<<
if you did update the radio (1.65.xx), you must first downgrade radio1.58.xx or older) and you'll go
Hey.First of all,I don't know much about theese rom update things and I know that i'm not good at English.
PPC: HTC Touch Elf (Windows 6.0)
PC OS: Windows 7
I want to install Windows 6.5 on my Elf.I've read some guides for that.I've downloaded that for unlocking CID: http://forum.xda-developers.com/showthread.php?t=320155 .I tried it like 15 times and got "Error 260" on all (i'm sure that i followed directions right).Then tried a few more CID Unlocker,but they all ended up to Error 260.
For example,on that unlocker,when it starts to upgrade my phone's screen turns off for 2 seconds,i'll hear the disconnect sound from my computer,and after my screen comes back with tricolor upgrade will stuck on %0 and i'll get Error 260 again.
I've tried with 3 different USB data cables but it's still same.And i'm deactivating my firewall/antivirus program before install...
Note:I've already searched on forums,but that didn't work.
hi
I've an HD2 stuck in the initial splash screen and would greatly appreciate help in how to reload a ROM
I tried reloading the official ROM but the update failed after 9% with error 290
So I thought I'd try HPSL custom ROM approach.
I want to end up with Win7 (I think!) so I was following this thread
I loaded HPSL2 OK
(The 3 colour screen now says
PB81100 HX-BC
SOL-2.08.HPSL 8G XE
0x05
CotullaHSPL 0x40)
I downloaded radio 2.15.50.14 and tried to flash that
HD2 toolkit (Load RUU) produced
Renaming the file LEOIMG.nbh on the SD card seemed to work (it got to 100%) then came up with the message 00018003 LEOIMG.nbh - fail
RADIO_V2 Fail
Update terminate
UPDATE fail
And all I get when I restart is a pretty "software update failed, Try again" message
I can still get the 3 color screen and the PC makes a USB connection but it seems I have to load something else
I was going to try MTTY (from the unbrick an HD2 thread) but when I start MTTY up it does not list USB as a possible connection (I'm on Win7 and there does not seem to be a way to tell activesync (equivalent) not to look at USB)
So I'm out of ideas and cant find a thread that will help. Any suggestions gratefully received
PS: Actually, I would be really happy if I could just get rid of HPSL and restore SPL 1.42 (for warranty reasons)
It seems the normal way is to load a stock ROM but as above, the load sticks in the first bit (when trying to load the radio)
Is there anyway I can cook a ROM to just have SPL in it and flash that (or maybe just not have the radio in it)?
TFAI
PARTIALLY RESOLVED
it seems that HPSL4 allows you to install SPL 2.08 or SPL 3.03 and get rid of HPSL. SO I 'll try that and see if HTC will repair under warranty