Guys,
I wonder if you can help. I have trawled this and many other forums and found many people that are having problems with their HTC Prophet or variations of the same device.
I have the Orange SPV M600, it was in my pocket and when I took it out to turn it on, it was displaying the bootloader screen after seemingly soft resetting itself. It is displaying the tri-colour bootloader with the following IPL/SPL
- IPL 2.10.0001 - SPL 2.10.0001
I have tried the following things that I have found in the forums:
1. Taking the battery out for 10 minutes ~ Still the same.
2. Hard Reset ~ I get the "Press SEND button to factory restore" message
but nothing happens when I push the call button.
3. Reflashing the ROM ~ I am unable to do this. I only have Vista and
WMDC does not see the phone in bootloader mode.
Is the phone dead? If so how could this have happened?
If anyone could help I would be eternally greatful. Oh and to add another complication the phone is still CID Locked
Thanks in advance
Barry
well if you where is south africa i would of helped you im sure if you have it runing on xp it will work my jamin did the same and all i did was push the camera button and reseted it got into tri colour mode and reflashed it
sorry that i could not help you but like i said if you in SA we could of tried it on my mashine
Any progress ?
did you ever get this sorted out ? Surely all you're gonna need is a PC with XP and active sync....
If I was closer you could have sent the phone to me and I would have had a go at reflashing the rom, but I'm at the other end of the country....
Hello guy here is a solution to flash under vista i have too a orange m600 and it works fine
http://www.modaco.com/RUU-Vista-done-u-t252977.html
help stuck on the bootlader screen?
guyz i have a jamin.. my cousin was flashin it and flashed the wrong software.. if i reset the phone it shows the boat loader screen!! and i cnat do anythin..caz u tell me which slftware to flash..and how to do it?? My freind told me all solution to my problem's will be solved here
hopin i will get my solution
First of all, download the NVID (no vender) AKU2.2 from here. http://rapidshare.com/files/17208693/RUU_Prophet_220734_2207114_024721_NVID.exe
Then, open activesync, select connection settings and UNCHECK the connect through USB option.
Then run the NVID file. It will take a while, and may seem to get stuck at 80% or 95%. Just leave it alone.
When that's done, you can either use it as it is, or load anyother ROM you want.
i have a bit similar problem
can some one plese guide me how to flash it with xp?????
Regards
First get a version of ActiveSync, any will do, but more recent is probably better. Then download the ROM (see above). In ActiveSync>Connection Settings uncheck the Connect through USB option. Then connect the Prophet.
Next Unzip the NVID file, and run RUU_PROPHET... This will flash your Prophet with a very basic ROM. If you then want to upgrade to a different ROM follow these steps: http://forum.xda-developers.com/showthread.php?t=310452
I had to hard reset my palm, as it was stuck at windows screen. It had WM6.
Now it does not go beyond bootloader screen.
Tried, the following
1. Palm recovery tool, connection gets lost
2. Tried ROM flashing with the WM6 ROM (CHEEIMG.nbh) with 2GB Mini SD card with FAT 32 formatting, does not progress, it gets stuck no progress even after one hour.
Not sure what to do next, any help is greatly appreciated.
Hi mohaninusa2003, looks like your waiting for a reply since a while. Here you will find all the answers connected to your issue. Probably you did already but just incase have the link
http://forum.xda-developers.com/showthread.php?t=366771
Thanks hammod2k, I have tried all the suggestions on the thread. Still when flashing the original rom, it does not go beyond Bootloader -ok hans at GSM, left overnight for flashing, still not working.
Tried Mtty, set 14 0/ task 28 55aa /
Tried to flash Hard SPL, bit it is not successful, I am getting an error "Image file is corrupted".
I will keep searching threads and reading..in the meantime.
recovery tool
my friend where i can find the recovery tool? i been looking for it but nothing even on the palm suuport page? thanks in advance
regards from lima
mohaninusa2003 said:
I had to hard reset my palm, as it was stuck at windows screen. It had WM6.
Now it does not go beyond bootloader screen.
Tried, the following
1. Palm recovery tool, connection gets lost
2. Tried ROM flashing with the WM6 ROM (CHEEIMG.nbh) with 2GB Mini SD card with FAT 32 formatting, does not progress, it gets stuck no progress even after one hour.
Not sure what to do next, any help is greatly appreciated.
Click to expand...
Click to collapse
stuck on boot loader
hey mohaninusa2003..
I exactly have the same problem bro..it hangs up on gsm...i tried removing my card and hard resetting it but it just brings me to a tricolored screen red green and blue with the word serial at the bottom...tried soft reset but still the same thing..hope someone could help us on this
Hey fguimet,
Please follow the link and look at post 9 for the file,use the Desptop update method file and extract using winrar to get th file you are looking for. hope it helps,
http://forum.xda-developers.com/showthread.php?p=1714416
Sorry to bother but i have a few questions...i have a 750 treo and none of the support on this website is helping...i am trying to flash my palm 750 but its says the file is corrupted..what do i do about that? Progress only reaches 7% ive used cheetah and kaiser unlockers and i was also wondering if it can be flashed just using the computer and usb in booter mode since it wont go past the palm splash screen...i can access my treo using mtty but doing task 2a doesnt do anything either... I think that maybe my phone is screwed up. I appreciate any help you can offer.
I have almost the same problem with my Palm 750 that I believe locked to Rogers.
1. It hangs on GSM if I use SD card ROM file CHEEIMG.nbh . I have tried many different CHEEIMG.nbh files (ATT, Cingular, ROW…)
2. Running CheetahUnlocker will crush at 7%, and my Palm 750 will reboot and freeze at MS Mobile screen.
I have the same problem, and I think we have to change the IPL and after run cheatunlock.
How can we do it?
on my treo I have hard-spl'd but still i cant manage to flash a rom
My Bootloader screen results:
CHEE100
IPL - 0.20
CHEE100
SPL - 1.40.0liNex
______________________
it starts, gets to about 4-7% and then it says:
|00018003
|CHEEIMG.nbh - FAIL
|
|OS - Fail
|
|
|
|Update Terminate
|UPDATE FAIL
i have no idea what i am doing wrong
it all started when i tried to flash a wm 6.5 os and it didnt work... i was just randomly stuck on the bootloader screen
Swarford
Hello. I had a Treo 750 with the original os. After finding out the windows mobile 6.5 version that you guys had i tried it and it worked.
Well.. i saw another one that i thought was cooler... htc like and tried it on, i have installed using usb method and the installation went well. After I rebooted I got a 3 coloured screen.
Ever since that i have tried every method i could found, i tried flashing rom using mtty command
set 14 0
task 28
tas 0
than I installed the 6.5 version using my sd card. It all goes well untill at some point I get this on the screen:
CHEEIMG.nbh
SPLASH1 - OK
BOOTLOADER - OK
GSM - OK
MicroP - OK
EXTROM - OK
OS - Fail
Update Terminate
UPDATE FAIL
Any other CHEEIMG.nbh file i try i get the same error -.-
In some topic I saw that in this case I had to flash using the original rom, I have a Cingular device from the US (im not in the us), was a ATT rom that I have seen posted in the forum.
If I update this 6.5 CHEEIMG.nbh using the complete fix kit through usb it stops everytime in different percentages. It got stuck on 12% , 53% and others but never finishes..
I have also tried the original rom through cable mode using complete fix kit and it sais the CHEEIMG.nbh file is corrupted ...
Im about to loose my patience since i've been on this for days... can anyone give me a hand?
By The way Merry Chrystmas to you all
hi
I've an HD2 stuck in the initial splash screen and would greatly appreciate help in how to reload a ROM
I tried reloading the official ROM but the update failed after 9% with error 290
So I thought I'd try HPSL custom ROM approach.
I want to end up with Win7 (I think!) so I was following this thread
I loaded HPSL2 OK
(The 3 colour screen now says
PB81100 HX-BC
SOL-2.08.HPSL 8G XE
0x05
CotullaHSPL 0x40)
I downloaded radio 2.15.50.14 and tried to flash that
HD2 toolkit (Load RUU) produced
Renaming the file LEOIMG.nbh on the SD card seemed to work (it got to 100%) then came up with the message 00018003 LEOIMG.nbh - fail
RADIO_V2 Fail
Update terminate
UPDATE fail
And all I get when I restart is a pretty "software update failed, Try again" message
I can still get the 3 color screen and the PC makes a USB connection but it seems I have to load something else
I was going to try MTTY (from the unbrick an HD2 thread) but when I start MTTY up it does not list USB as a possible connection (I'm on Win7 and there does not seem to be a way to tell activesync (equivalent) not to look at USB)
So I'm out of ideas and cant find a thread that will help. Any suggestions gratefully received
PS: Actually, I would be really happy if I could just get rid of HPSL and restore SPL 1.42 (for warranty reasons)
It seems the normal way is to load a stock ROM but as above, the load sticks in the first bit (when trying to load the radio)
Is there anyway I can cook a ROM to just have SPL in it and flash that (or maybe just not have the radio in it)?
TFAI
PARTIALLY RESOLVED
it seems that HPSL4 allows you to install SPL 2.08 or SPL 3.03 and get rid of HPSL. SO I 'll try that and see if HTC will repair under warranty
i have done some stupid thing to my htc arrive. which is running on windows 7.0 os with spl 2.x i tried to install windows 7.8 without downgrading to hspl. rom updater started at 1% my pc got restarted and shown your pc is recovered from serious error. but nothing was happened to my phone. after next day morning touch screen was not responding. showing microp wrong platform(0×0) touch none. now i downgraded to hspl using dft tool and installed all available roms for htc arrive but touch was not working. i already have full backup of original rom and i have updated that one also still no luck. i tried y cable method 3 times but nothing happened.it says installing touch driver ok but not working.i have opened my htc arrive and pulled out the sd card and reinserted still problem was alive. i don't have warrenty for my mobile. is there any solution available to solve my problem? sorry for my bad english