Database Info

help frozen pda

I own an MDA compact on t-mobile uk,
whilst on there homepage i saw a "update your MDA software"alert,
i downloaded the software and ran it.
the MDA then went off and when turned back ran a hard reset.
the MDA then runs thru the set up,when thats complete is shows a grey type screen with serail v1.02
its frozen on this screen and unuseable any effort to do anything makes a repeat cycle of the above
please help me turn my paperweight back into a pda
thank you very much
(i think im best sticking to a standard phone from here on in,im not techy enuff to have a pda.doh!)

ur just in bootloader..go read wiki
u gotta press the reset,power and record camera btton together..thats wot i do for my 9090

thank you very much for your help
its appreciated .
ill try that
thanks again friend.

Jace,
the power & camera & soft-reset button will bring you in bootloader, just where you're now.
You'd better connect USB & run the update again. Something got broke the previous time, that's why you're in bootloader now.
Regards, M

brill guys ta
only problem(sorry guys still learning)from the bootload screen the pc wont see the device is connected and if i try to run the device to get to a standard screen to sync it just reboots?
how do i actisync while in bootloader?
ta

Jace pls don't try Act.sync. Run the update again :!:

ive manged to get the pc to see the pda and ran it under a guest partnership,
once it had seent he pda, i re-ran the update,but each time it goes thru the motions then gives and error msg.
man im goin back to a normal handset next time

What rom nr are you flashing? & what's the error message?
Cheers, M

Thanks for all your help sorry to be such a pain.
i got the file from the tmobile uk site .
file name ma-tmuk-11300-128-11200
when connectiong its says
updating from
device ce image:1.13.00
device ext imagethis is blank)
deivce radio:1.12.00
up dating to
device ce image:1.13.00
device ext image:1.13.128
deivce radio:1.12.00
it runs thru then stops and says
error 101:connection error
thanks

when booting up the bottom right shows
R 1.12.00
G t1337.42
D 1.13.00wwe

Ok that's the 1.13WWE rom, which is available sine october last year. Should be a normal rom without problems. If you never updated before & still in your warranty period, return your device.
BTW have you rebooted your PC during your sequence off tries?
Guess your no pain, but you got bad luck in upgrading this time. You did the right steps to cure everything.
Cheers, M

great thanks,
i have rebooted pc but ill do that then retry nothign to loose at this stage thanks mate

Did you ever make a rom-dump of your working device? Otherwise you can try to make one now & do a SD-update.
Cheers, M

no i didnt mate doh
ta for all your help mate appricated

Problems with rom update

Hi all
First of all sorry for my grammer, english in not my native language.
I've tried to update my O2 XDA Neo with SMART1 WM6 Rom, i've download the file and started the "UPGRADE_ROM.bat" after installation finished i notice an error click then hardreset the phone, for a second on the display apear the HTC logo, after that the QTec blue screen with the IPL 2.15.0001; SPL 2.20.0001; GSM 02.20.21; OS 10.1.0.811 and then nothing happens. I hardreset the phone several times but so far no good. I come up with idea to go to bootload (holding camera button and pressing reset) and try to reflash it but the update_rom.bat says "No Device Connected" from there i have no idea what to do. I'm with MS ActiveSync 4.5 please help me.

the same problem with me i tried several methods to fix this problem but unfortunetely couldn't find any solution to fix it finally took my phone to the technical service.If you have quarantie I recommend you to the same thing.But never say them that I tried to flash a new rom because this breaks the quarantie.Just say my phone doesn't start.Don't worry they can't understand that you 've tried to flash your O2

Ok, things you should *do* before upgrading to WM6
Make sure that you have AKU2.2 (for instance RUU_Prophet_220734_2207114_024721_NVID.exe) installed _BEFORE_ upgrading to either AKU 3.3 (aserg for example) or WM6. This is in any case true for G4, most probably this goes for G3 as well, but I cannot say this for sure, since I do not own one.
If you happen to get stuck at boot screen because update process failed, grab the rom above and run it with USB plugged in, this will 9/10 of all cases fix your device.
No, I do not have a link to this rom, try to look for it yourself.
For the rest, happy upgrading

rom flash
make sure you disable your antivirus softwear and your windows firewall don,t use any extended usb hubs and you have cid unlocked it make sure let it do a full flash dont do enything else with your pc when you flash your phone good luck i hope this was usefull

Do You have Problem downgrade fr ROM 2.03 TX WWE

Hi all,
I'm Indonesian. My Device is XDA II Mini. A few weeks ago I have upgrade the ROM to 2.03 TX WWE, used it for about week. A problem appear when I tried to downgrade the ROM to the original one from seeo2.com site the PC tell the error 150 (I think its about the connection).
when I read this forum, i know the many people have the same problem with me.. and still not found yet the solution for solving this problem.
With this situation I made this new thread to share our problem in this thread. Its about the history from ROM 2.03 TX WWE, about the maker of this ROM and for the warning massage for anyone who wish to write this ROM to their device so they will think 100 times to use this ROM.
Lets join this thread and hope there be a nice guy who can solve our problem.
regards
Eric
Jakarta-Indonesia

Hello,
I have the same problem with my magician. I flashed so many times some ROMs on my Magician before without any problems. But since I flashed the 2.03TX ROM, there is no way to flash any ROM. I also can't reflash the 2.03TX ROM. It always says, that there is an Connection Error.
I tried to flash with the official Setup and also with the No_ID.exe, but there is no chance to do something.
The 2.03TX is a very nice Rom, but i want to use the programm "Phone Extender" on my Magician and it doesen't run with 2.03TX...
Please help us someone, I want an other Rom on my Magician!

Where is everybody.....
Please Help us hiek hiek hiek.... cry cry cry....
Does anyone can help us ?????
Pleeeeaaaaseeee......

The same problem, the 2.03TX WWE is a nightmare for me.

I haven't got any problem.
Flashed just last week tx203->TMobile112->wm61.
Very happy with everything, I am using XP and O2 mini

you should flash from bootloader.

I have problem after try flash wm6 from 2.03 TX WWE phone only boot mode ... any help .. I try to flash same rom but I give same error on country id

I have the same problem.
Solution is to enter to the bootloader mode somehow and downgrade to original not bigstorage rom and than flash new cotula rom.
If you can't enter to the bootloader mode with power+camera+reset buttons try to hold longer or rapidly press power+camera and then press reset a few times. I'm succeeded finaly...

to bootloader mode mean screen with serial or usb status ... my problem is I try more rom but any flash I don't have original rom ... what I do?

hello im from Indonesia too...
You can use magicianUpdt_NoID (or another name, i forgot)
you can search at xda-developers ftp..

I have no problem with mine.
When I flashed this ROM it got automatically flashed twice.. I don’t know what happen but it was successful

Hello
I was sucessfull.
There is a 2 step flash!!!
P-O

I try to use this too but nothing no flash ....

Try this rom: http://rapidshare.com/files/18876133/NL_11300_131_11200.exe
If this doesn't work tell me the error message...

ok this img of error the image 1 when start exe the other when stat update noid

jovan.asanin said:
I have the same problem.
Solution is to enter to the bootloader mode somehow and downgrade to original not bigstorage rom and than flash new cotula rom.
If you can't enter to the bootloader mode with power+camera+reset buttons try to hold longer or rapidly press power+camera and then press reset a few times. I'm succeeded finaly...
Click to expand...
Click to collapse
Mine keeps reseting everytime it should go into the bootloader screen.
I can force it, but then the update wont continue anymore.
How did you do it?
---Edit---
Nevermind, found the solution here, its the old vista driver bug... :/
http://forum.xda-developers.com/showthread.php?t=291723

I use xp ...

well... it worked on mine...
Try the driver thingy anyway and follow the instructions to the letter.

I try more and more but notuhing

Here's what I did step-by-step:
- Recharge the battery to at least 70% in a electric charger (not connected to the PC).
- Go into bootloader (press the power button +camera button without releasing and click the tiny little hole on the right bottom side of the device, next to the audio entrance).
- The screen goes black, that's normal, with the help of a bright light you can see its written on the screen "SERIAL" and "V1.02" (or something similar).
- Go into Active Sync on XP (or Windows Mobile Device Center on Vista) and uncheck the option "Allow USB Connections".
- Connect your pocket pc to the PC usb (its still in the bootloader screen, right?).
On Vista (I think XP can skip this step)--------------->
- Go to Control Panel > Administrative tools > Services and start the services "windows mobile device connectivity" and "windows mobile device 2003 connectivity", its they are already running thats ok.
- Now go to Control Panel > System > Device manager, find your mobile device and force the update of the driver attached here.
- Now, press Ctrl+Shift+Esc for Taskmanager and kill "WMDC.exe".
------------------------------------------------------------------->
- Download this rom (46mb): http://rapidshare.com/files/18876133/NL_11300_131_11200.exe (its in english WWE)...
- With Winrar, extract that EXE into a folder.
- Copy the MaUpgradeUt_noID.exe attached here into that folder, with the rest of the files.
- Run MaUpgradeUt_noID.exe.
- If all goes well the update will take a loooong time and pass thru three install bars, that's normal.
- After that it recommends a Hard-reset (Power button + reset at the same time).
Now your rom is official, and you should have no more problems.
Install the Cotulla WM6.1 rom: http://forum.xda-developers.com/showthread.php?t=492937
Based on: http://forum.xda-developers.com/showthread.php?t=291723

[HELP] Acer s200 update rom fail

I have try to flash the unofficial rom. However, the phone rebooted during the update process. Now, my Acer s200 only can display the splash screen and cannot go into windows...
Anyways can flash the rom again?? I tried to use Acer_EUU.exe, but it need to detect the phone by Activesync. Anyways can flash the rom bypass activesync?

Some problem....

Hi!
I tried to flash from original EN ROM version on RU version and had the same problem - the device displayed Windows splash screen and then just reboot. So, I was confused but I didn't stop this process and after half an hour Windows loaded...(during this time I removed he battery and pushed soft-reset button a lotof times).
So, my only advice is to try to wait with re-booting device till the Windows boot and then to flash the original ROM (if you'll find it).
For me - after I loaded RU version of Windows I just flashed for custom EN ROM and it was OK (without this issue).
Good Luck!

It solves your problem..
DimICE said:
Hacked ACER_EUU.exe
Link: http://www.mediafire.com/?wy2yynnjz2z
ActiveSync connection is not needed!
Also is not needed to edit version.txt..
Just replace original ACER_EUU.exe with this file, execute it. Press next,next,ok,ok.. Message "Waiting for download mode coming" appear..
Power your Acer s200 with Power+Camera buttons pressed and connect to computer.
Tested on 2 acer s200 phones
Sorry for my English)))
Click to expand...
Click to collapse

link not working ( http://www.mediafire.com/?wy2yynnjz2z )

http://dimice.ru/ACER_EUU.exe

Rom update can be computer's fault
DimIce's program works perfectly. I've thought I bricked my phone many times, but always have been able to recover. This is what I recently discovered. In the middle of a flash, my computer said "write error". 'Thought my phone would stay dead. Finally, I switched to another computer and flashed the phone with no problem. So if you suffer a bad flash, simply change computers. If none is available, reboot your computer to clear the memory, etc. (by the way I'm using Windows 7 x64) and try again - sometimes even changing the USB port might help. The phone excels in it's ability to be re-flashed -even if you suffer disaster in the middle of a procedure.

As we dedicate only to HTC devices you won´t get too much attention.
Better try here:
http://www.eten-users.eu/
Good luck,

orb3000 said:
As we dedicate only to HTC devices you won´t get too much attention.
Better try here:
http://www.eten-users.eu/
Good luck,
Click to expand...
Click to collapse
Ignore this guy he has a bot setup for posting this on everyone that has 1 post or is posting in general or Upgrading, Modifying and Unlocking, You need to flash a rom based of the 1.00 oem drivers, flash this rom: http://forum.xda-developers.com/showthread.php?t=596304 and all of your problems will be solved, if not let me know and il help you out.

rafyvitto said:
Ignore this guy he has a bot setup for posting this on everyone that has 1 post or is posting in general or Upgrading, Modifying and Unlocking, You need to flash a rom based of the 1.00 oem drivers, flash this rom: http://forum.xda-developers.com/showthread.php?t=596304 and all of your problems will be solved, if not let me know and il help you out.
Click to expand...
Click to collapse
If you have any problem please take it to the council.
my only intention is to let new members know that this is an HTC forum only!
So they don't waste their time
If that bothers you, shame...

XDA has never meant to be HTC only.
Just open your eyes, dear sir.

I have a problem with the installation romu message pops up to me(sorry acer usb host driver must be installed in windows xp sp2 or later version please update os version to windows sp2)

stuck on clean boot screen
Hi, i was updating from EUU_Acer_S200_3.003b.00_EN_03.03.08_3.003.01_20100119 to EUU_Acer_S200_3.003c.00_ES_03.03.08_3.003c.00_20100201 but accidentally closed the acer's application, so the phone is stuck on "clean boot" screen? what should i do?, thank you!

Need help installing Windows Mobile 6.1 on HTC TOUCH (Vogue)

Hi Everybody. This is my first post here
I own an HTC Touch (Vogue) from Orange (Spain) and I would like to install WM 6.1 on it. Orange does not provide with WM 6.1 and I found on the internet that there is a Sprint version of it, so I decided to install it. I get "Error 270" it says the image is corrupt. I tried to make an splxploit-windows and nothing happens... I took a screenshot (attached file) of what I get... and it stays there. Nothing happens at all.
I tried to install other versions also... HTC Magician and others just to see what happens and always I get "Error 270". The only one I could install successfuly is the Orange Rom
I tried everything and can´t find a solution. Any help there please?
Thanks a lot! =)
PD: I am using Windows XP, ActiveSync 4.5 and in SPLXPLOIT-WINDOWS I am following this steps (I get stuck in step 4)
1) manually start in bootloader mode
2) disable USB in activeSync
3) check 'usb' appears at the bottom of the tricolor screen and that he device is recognized by XP. If not, try unplugging/repluging
4) run the corrected unbrick.bat
5) while still in (new) tricolor screen after loader update, upload a new ROM

Any ideas?

This is not a complaint... this is just how I feel::
It is really frustrating to post something for 1st time in a forum looking for an answer and not to get anything in three days.

Welcome to forums
Have a deep read on Wiki here
Also visit Vouge section.
Read, Search, Respect and Enjoy!