I was doing an Update to my i-mate Jam using ma_cdlsku2_arb_10300_141_10100_ship.exe but something in the middle of the upgrade went wrong, the computer rebooted.
When the computer booted up I tried to update again I turned the i-mate (Qtek S100) up it wont boot completly. I get the blue Imate screen and at the bottom right corner I see in red
NO GSM
D 1.03.00 WWE
and it stops there, I tried to run the MaUpgradeUt.exe and I got Error 120 Country ID ERROR, then I tried QtekS100_FRA_DT_10302_157_10100_For_MDA_T_Mobile.exe but nothing I get the same error.
I hard reset it and I get the USB written on the screen. I tried to run an upgrade but ma_cdlsku2_arb_10300_141_10100_ship.exe gives me error 101 connection problem and I tried QtekS100_FRA_DT_10302_157_10100_For_MDA_T_Mobile.exe and get the Error 120 Country ID error.
Please help what to do ?
Please help.
by the way, I baught this in Dubai, so I am no able to take it back to dealer to fix it. please help :?:
Related
Ok I am at the end of my wits here.
I tried to do an Upgrade of my Imate Jam to the latest Rom on the Clubimate site
But it got stuck on the checking site. So after a bit of research I found that if I unplugged and reset it, it should take the upgrade and it looked like it would Except
On the CE update it gets Stuck at 7% and gives me an ERROR 112 CE Update Failed.
I have tried many times to get it too work rebooting each time.
I have tried on 3 different Machines in case it was the USB Hub Problem.
I even tried the S100 rom with the Country code hack and it even got stuck on 7% same error.
Please Help
SciberWolf
sciberwolf said:
Ok I am at the end of my wits here.
I tried to do an Upgrade of my Imate Jam to the latest Rom on the Clubimate site
But it got stuck on the checking site. So after a bit of research I found that if I unplugged and reset it, it should take the upgrade and it looked like it would Except
On the CE update it gets Stuck at 7% and gives me an ERROR 112 CE Update Failed.
I have tried many times to get it too work rebooting each time.
I have tried on 3 different Machines in case it was the USB Hub Problem.
I even tried the S100 rom with the Country code hack and it even got stuck on 7% same error.
Please Help
SciberWolf
Click to expand...
Click to collapse
Could be the rom you downloaded not complete or there is file error. Try download the file again and extract to a new folder.
Check on this page. Use the no ID file to start the flash.
http://forum.xda-developers.com/viewtopic.php?t=18550&start=25
Goodluck.
Thanks for the reply OCMAX but no go
Tried downloading the File again From Clubimate and XDA-Devs FTP no go
Tried with the No ID updater as well but it is still getting stuck at 7%.
The weird thing is it always gets stuck at 7% even if it is another Rom Image.
The only thing I have not tried is the Original Rom image that came with the
Imate Jam because I can’t find it. Anybody have it?
Any other subjections. Im now at 27hours without my PDA not that I’m
Counting
SciberWolf
sciberwolf said:
Thanks for the reply OCMAX but no go
Tried downloading the File again From Clubimate and XDA-Devs FTP no go
Tried with the No ID updater as well but it is still getting stuck at 7%.
The weird thing is it always gets stuck at 7% even if it is another Rom Image.
The only thing I have not tried is the Original Rom image that came with the
Imate Jam because I can’t find it. Anybody have it?
Any other subjections. Im now at 27hours without my PDA not that I’m
Counting
SciberWolf
Click to expand...
Click to collapse
Did you do hard reset the first time you face the 7% error and you are now in the USB v1.0 bootloader mode now?
I had the same problem with a friend's QTEK S100 it was stoping with an upgrade error at the very beggining of the extended ROM flashing no matter which ROM you were flashing to it! At the end they exchanged it for a new one, probably the ROM chip was faulty!
MDA Compact does not open HELP!!
Hello everyone,
I'm new to this board and I read nearly all threads about MDA. I bought my T Mobile MDA Compact 2 weeks ago from Germany. Yesterday while I was trying to change its language to English its locked. I installed Windows 2003 SE then device restarted but not open anymore. Now I can not open it. When I try to open it on the top of the screen it writes "Seial" and at tthe bottom it writes "1.00 Version". What should I do? I need immediate assistant; can anybody help me to make my MDA Compact working again?
Thanks
AE
i was trying to upgrade my i-mate jam Rom with RUU172126WWE_imate.exe, but after sometime i got error message and my set gone off, now i cant connect with ActiveSync, using only with Usb wire now i trying to upgrade with so many Rom versions but while upgrading got error message mostly in 2n step, could any one please help me to come out from this problem, i don know what was the actual version of my Rom but my Jam set is made from Taiwan
Getting error everytime
i trying 2 upgrae my PM10A and get everytime Error 112 : CE ROM Update Error so what i do? how can i overcome this problem?????????? any1 can help me out pls??????? i m trying with MA_TMNL_11300_132_11200_Ship.exe with MaUpgradeUt_noID.exe
Hello,sorry I'm not too expert, but I've tried to upgrade my qtek 2020 from windows mobile 2003 to WM5 following instructions that i've found on this site, but I've got a big problem. When himaupgradeut_noID start after some minutes it gives me the following message: Error 101: connection error.
My qtek 2020 remain with the Serial (when it is out of the cradle) or -- USB (when it is on the cradle) black screen (v 1.06) and nothing happens... I've tried to reset it pressing the power and reset button but it remains on the same black screen!!
Please help me what could be the problem? What should I do? It seems to be a communication problem with the usb but before starting the upgrade Active sync was running ...
Thank you for your help
imate phone edition upgrade for model ph10b
Hello, i have an imate ppc (the phone edition),,,i cant find an upgarde for my ppc,,, can anybobody help me pls...i tried the upgrade for xdaII that i got from this site.... but it does not work when i installed it ,,,,i would appreciate it if somebody could give me a guide to where to find the upgrade download for my ppc...the only program that work for my ppc is the pointui home,,,,,i also tried to install a phone pad,,,and it didnt work as well....it is sometimes difficult to do a text msg,,,,with the keybord... specially if i am on my way to work,,,,
please help me to upgrade my imate phone edition,,,,
thank you for your help...
any guide I could give would only be a directly
copy paste of the readme in the zip file with the rom upgrades
wm5 wm6 wm6.1 same deal same readme
sorry for my English
Hello. I have an immense problem and say I changed the SPV E650 roma no and about 45 percent after I disconnected the phone from the bowel and no kompa. Now the phone turns on but only a HTC logo and nothing happens. like trying to upload a new rom is no error crashes me an error [270] like trying to do hard reset by pressing the green handset is referred to as the HTC logo and nothing happens the whole night and it was so lipa.Tel included without problem to budloadera. Is anyone able to fix this thanks in advance because I do not know what to do and the phone has only five days to the max so lime pomoc.próbowałem please upload it to the card but I wyskkuje Invalid Certificate.
Vox
onbl 1.22.0000
vox
spl 1.22.0000
vox CPLD -04
This pops up when bootloaderze
unsuccessful attempt to change the roma. big problem Please Help!
]sorry for my English
Hello. I have an immense problem and say I changed the SPV E650 roma no and about 45 percent after I disconnected the phone from the bowel and no kompa. Now the phone turns on but only a HTC logo and nothing happens. like trying to upload a new rom is no error crashes me an error [270] like trying to do hard reset by pressing the green handset is referred to as the HTC logo and nothing happens the whole night and it was so lipa.Tel included without problem to budloadera. Is anyone able to fix this thanks in advance because I do not know what to do and the phone has only five days to the max so lime pomoc.próbowałem please upload it to the card but I wyskkuje Invalid Certificate.
Vox
onbl 1.22.0000
vox
spl 1.22.0000
vox CPLD -04
This pops up when bootloaderze[/QUOTE]
fitmin.pl said:
]sorry for my English
Hello. I have an immense problem and say I changed the SPV E650 roma no and about 45 percent after I disconnected the phone from the bowel and no kompa. Now the phone turns on but only a HTC logo and nothing happens. like trying to upload a new rom is no error crashes me an error [270] like trying to do hard reset by pressing the green handset is referred to as the HTC logo and nothing happens the whole night and it was so lipa.Tel included without problem to budloadera. Is anyone able to fix this thanks in advance because I do not know what to do and the phone has only five days to the max so lime pomoc.próbowałem please upload it to the card but I wyskkuje Invalid Certificate.
Vox
onbl 1.22.0000
vox
spl 1.22.0000
vox CPLD -04
This pops up when bootloaderze
Click to expand...
Click to collapse
[/QUOTE]
Hi,
Do the following steps..
1-Download the ROM From following lin
http://www.htc.com/www/SupportDownload.aspx?p_id=8&cat=2&dl_id=16
2-Connect HTC710(vox) to pc.After Successful connection after boot loader appear at your vox.
3-Run the downloaded set up.
Do Hope it will solve your problem.
dude I can not get to roma. Do you have another site where you can download it to?
and it seems to me that this is typical of the HTC and I have a SPV E650 and there is no difference?
fitmin.pl said:
dude I can not get to roma. Do you have another site where you can download it to?
and it seems to me that this is typical of the HTC and I have a SPV E650 and there is no difference?
Click to expand...
Click to collapse
Here you GO.
Check here: ftp://xda:[email protected]/ROMs/Shipped
Use the WWE version!
with courtesy of FHM.
dude I can not open the link an error pops up. can you see if you gave good? Thanks in advance
fitmin.pl said:
dude I can not open the link an error pops up. can you see if you gave good? Thanks in advance
Click to expand...
Click to collapse
HERE IS ANOTHER LINK
http://wiki.xda-developers.com/index.php?pagename=vox_roms
Click On ftp of xda-developers at page
downloaded from this page roma WWE version and did just as well sayest, and again jumped to 3% error Error [294] Invalid vender ID
This update utility can not be used for your Smartphone. Plese check your update utality
and tell me what to do now?
fitmin.pl said:
downloaded from this page roma WWE version and did just as well sayest, and again jumped to 3% error Error [294] Invalid vender ID
This update utility can not be used for your Smartphone. Plese check your update utality
and tell me what to do now?
Click to expand...
Click to collapse
Hi,
I Think Roms was not downloaded properly. Els
If you had Rom As you mentioned in the first post. Retry with it..
1-turn off your vox.
2-press hold the camera button, while camera button pressed connect your vox with cabel to your PC.
3-Run the ROM setup.
Do hope it will solve your problem otherwise move to a service center.
Same problem with me.
fitmin.pl said:
]sorry for my English
Hello. I have an immense problem and say I changed the SPV E650 roma no and about 45 percent after I disconnected the phone from the bowel and no kompa. Now the phone turns on but only a HTC logo and nothing happens. like trying to upload a new rom is no error crashes me an error [270] like trying to do hard reset by pressing the green handset is referred to as the HTC logo and nothing happens the whole night and it was so lipa.Tel included without problem to budloadera. Is anyone able to fix this thanks in advance because I do not know what to do and the phone has only five days to the max so lime pomoc.próbowałem please upload it to the card but I wyskkuje Invalid Certificate.
Vox
onbl 1.22.0000
vox
spl 1.22.0000
vox CPLD -04
This pops up when bootloaderze
Click to expand...
Click to collapse
[/QUOTE]
Same Problem I am facinf dude. Vendor ID error... etc
No one we probably will not know how to use all the help they piali above and nothing. tried to install all the roms that I found on xda even other operators, Orange and continues at 3% turn off the phone. Even the cards will not install
Hi,
1-turn off your vox.
2-press hold the camera button, while camera button pressed connect your vox with cabel to your PC.
3- Run the USPL (Vox USPL- CID BYPASS.zip)
4- Run the ROMUpdateUtility.exe (Vox-USPL-RUU.zip)
try update your ron again
Hello. I start with the Folder Vox USPL-CID BYPASS uspl_116_jockyw file and after a few button clicks, any such information pops up waiting for a device to connect ... and a window pops up (no of connected device) with the information Would you like to try copying again?
and when I run the file after 100 romupdateutility August wyłancza phone and HTC logo shows up on the computer and the error [270] update error the image is corrupted, Please check your update utility. and what to do??
fitmin.pl said:
Hello. I start with the Folder Vox USPL-CID BYPASS uspl_116_jockyw file and after a few button clicks, any such information pops up waiting for a device to connect ... and a window pops up (no of connected device) with the information Would you like to try copying again?
and when I run the file after 100 romupdateutility August wyłancza phone and HTC logo shows up on the computer and the error [270] update error the image is corrupted, Please check your update utility. and what to do??
Click to expand...
Click to collapse
Hi,
If a ROM is already installed then
You might be missing a step and that is....
Turning off phone signal or forgot to ending up the vox partnership with PC or Both.
Do hope this will work..
Have a nice Day
hello.
[email protected] buddy do not really understand what you wrote because I do not know English well so I'm Polisch so you know. Could it somehow clearly write your latest post?
fitmin.pl said:
hello.
[email protected] buddy do not really understand what you wrote because I do not know English well so I'm Polisch so you know. Could it somehow clearly write your latest post?
Click to expand...
Click to collapse
Hi, how about your Russian ? Do you understand on that language ?
Russia in general I do not know and does not understand. I know a little English
how would anyone know how it would be Polish super
fitmin.pl said:
Russia in general I do not know and does not understand. I know a little English
how would anyone know how it would be Polish super
Click to expand...
Click to collapse
You need ROM with correct CID. It will let you to install the same Orange ROM, and later use SoftSPL and upgrade to other ROM.
Polish:
Potrzebny ci ROM z właściwym CID'em. Z tego co zrozumiałem to Orange'owy. Będziesz mógł go zainstalować i dopiero wtedy będziesz mógł użyć SoftSPL do wgrania innego ROM'u (np. oryginalny HTC Vox)
I have a hp ipaq hx2190, and i want to put wm6 on it.
But when i try to put it in bootlader mode i get a white screen.
So i searched around the forum and the white screen seems normal.
so i runned the update software, but it stucks on verifying the information on your ipaq pocket pc.
and when i not put it in bootloader the progres bar stucks at 0.1%.
please help me.
best regards shailo
ps. sorry for bad english im dutch
i forgot to say it ends up in a error saying something about active sync error
my pc gives a bleep when i connect it
come on no body