i was trying to upgrade my i-mate jam Rom with RUU172126WWE_imate.exe, but after sometime i got error message and my set gone off, now i cant connect with ActiveSync, using only with Usb wire now i trying to upgrade with so many Rom versions but while upgrading got error message mostly in 2n step, could any one please help me to come out from this problem, i don know what was the actual version of my Rom but my Jam set is made from Taiwan
Getting error everytime
i trying 2 upgrae my PM10A and get everytime Error 112 : CE ROM Update Error so what i do? how can i overcome this problem?????????? any1 can help me out pls??????? i m trying with MA_TMNL_11300_132_11200_Ship.exe with MaUpgradeUt_noID.exe
Related
I was doing an Update to my i-mate Jam using ma_cdlsku2_arb_10300_141_10100_ship.exe but something in the middle of the upgrade went wrong, the computer rebooted.
When the computer booted up I tried to update again I turned the i-mate (Qtek S100) up it wont boot completly. I get the blue Imate screen and at the bottom right corner I see in red
NO GSM
D 1.03.00 WWE
and it stops there, I tried to run the MaUpgradeUt.exe and I got Error 120 Country ID ERROR, then I tried QtekS100_FRA_DT_10302_157_10100_For_MDA_T_Mobile.exe but nothing I get the same error.
I hard reset it and I get the USB written on the screen. I tried to run an upgrade but ma_cdlsku2_arb_10300_141_10100_ship.exe gives me error 101 connection problem and I tried QtekS100_FRA_DT_10302_157_10100_For_MDA_T_Mobile.exe and get the Error 120 Country ID error.
Please help what to do ?
Please help.
by the way, I baught this in Dubai, so I am no able to take it back to dealer to fix it. please help :?:
Ok I am at the end of my wits here.
I tried to do an Upgrade of my Imate Jam to the latest Rom on the Clubimate site
But it got stuck on the checking site. So after a bit of research I found that if I unplugged and reset it, it should take the upgrade and it looked like it would Except
On the CE update it gets Stuck at 7% and gives me an ERROR 112 CE Update Failed.
I have tried many times to get it too work rebooting each time.
I have tried on 3 different Machines in case it was the USB Hub Problem.
I even tried the S100 rom with the Country code hack and it even got stuck on 7% same error.
Please Help
SciberWolf
sciberwolf said:
Ok I am at the end of my wits here.
I tried to do an Upgrade of my Imate Jam to the latest Rom on the Clubimate site
But it got stuck on the checking site. So after a bit of research I found that if I unplugged and reset it, it should take the upgrade and it looked like it would Except
On the CE update it gets Stuck at 7% and gives me an ERROR 112 CE Update Failed.
I have tried many times to get it too work rebooting each time.
I have tried on 3 different Machines in case it was the USB Hub Problem.
I even tried the S100 rom with the Country code hack and it even got stuck on 7% same error.
Please Help
SciberWolf
Click to expand...
Click to collapse
Could be the rom you downloaded not complete or there is file error. Try download the file again and extract to a new folder.
Check on this page. Use the no ID file to start the flash.
http://forum.xda-developers.com/viewtopic.php?t=18550&start=25
Goodluck.
Thanks for the reply OCMAX but no go
Tried downloading the File again From Clubimate and XDA-Devs FTP no go
Tried with the No ID updater as well but it is still getting stuck at 7%.
The weird thing is it always gets stuck at 7% even if it is another Rom Image.
The only thing I have not tried is the Original Rom image that came with the
Imate Jam because I can’t find it. Anybody have it?
Any other subjections. Im now at 27hours without my PDA not that I’m
Counting
SciberWolf
sciberwolf said:
Thanks for the reply OCMAX but no go
Tried downloading the File again From Clubimate and XDA-Devs FTP no go
Tried with the No ID updater as well but it is still getting stuck at 7%.
The weird thing is it always gets stuck at 7% even if it is another Rom Image.
The only thing I have not tried is the Original Rom image that came with the
Imate Jam because I can’t find it. Anybody have it?
Any other subjections. Im now at 27hours without my PDA not that I’m
Counting
SciberWolf
Click to expand...
Click to collapse
Did you do hard reset the first time you face the 7% error and you are now in the USB v1.0 bootloader mode now?
I had the same problem with a friend's QTEK S100 it was stoping with an upgrade error at the very beggining of the extended ROM flashing no matter which ROM you were flashing to it! At the end they exchanged it for a new one, probably the ROM chip was faulty!
MDA Compact does not open HELP!!
Hello everyone,
I'm new to this board and I read nearly all threads about MDA. I bought my T Mobile MDA Compact 2 weeks ago from Germany. Yesterday while I was trying to change its language to English its locked. I installed Windows 2003 SE then device restarted but not open anymore. Now I can not open it. When I try to open it on the top of the screen it writes "Seial" and at tthe bottom it writes "1.00 Version". What should I do? I need immediate assistant; can anybody help me to make my MDA Compact working again?
Thanks
AE
Hello,sorry I'm not too expert, but I've tried to upgrade my qtek 2020 from windows mobile 2003 to WM5 following instructions that i've found on this site, but I've got a big problem. When himaupgradeut_noID start after some minutes it gives me the following message: Error 101: connection error.
My qtek 2020 remain with the Serial (when it is out of the cradle) or -- USB (when it is on the cradle) black screen (v 1.06) and nothing happens... I've tried to reset it pressing the power and reset button but it remains on the same black screen!!
Please help me what could be the problem? What should I do? It seems to be a communication problem with the usb but before starting the upgrade Active sync was running ...
Thank you for your help
imate phone edition upgrade for model ph10b
Hello, i have an imate ppc (the phone edition),,,i cant find an upgarde for my ppc,,, can anybobody help me pls...i tried the upgrade for xdaII that i got from this site.... but it does not work when i installed it ,,,,i would appreciate it if somebody could give me a guide to where to find the upgrade download for my ppc...the only program that work for my ppc is the pointui home,,,,,i also tried to install a phone pad,,,and it didnt work as well....it is sometimes difficult to do a text msg,,,,with the keybord... specially if i am on my way to work,,,,
please help me to upgrade my imate phone edition,,,,
thank you for your help...
any guide I could give would only be a directly
copy paste of the readme in the zip file with the rom upgrades
wm5 wm6 wm6.1 same deal same readme
Hi all,
I'm desperatly trying to update the ROM of my HTC Touch Pro with:
V14_21884_Final_RC
Timolol_5100603TH
TAELROM_v4.23569_STANDARD_21MAY10
but every time it stucks at 0% for a few seconds, then the error message
ERROR [262] : UPDATE ERROR appears:
The ROM Update Utility has encountered communication errors during the update process....
Connection is via USB to a Windows 7 Laptop.
Can anybody help plse?
Cheers Peter
did you apply hardspl on your phone? did you follow the steps from http://forum.xda-developers.com/showthread.php?t=448008 ? are you sure your phone is correctly connected to your pc?
Hi, I'm new here, so be patient I want to install Anryl's ROM WM6.1. I unlocked my phone, so now instalation. I have microSDHC card, so I have to do it from PC. When I run instalation, screen turns off and activesync disconnects. There is error 260. I tried it from bootloader, installation stardted, but on 1% it shows me error 244, unknown model. Can anyone help me? Thanks a lot.
I tried it again. Error 204
HTC TYTN/Hermes is not a Kaiser.
You will want a ROM for your phone.
Not ROM Development thread closed.