I have a hp ipaq hx2190, and i want to put wm6 on it.
But when i try to put it in bootlader mode i get a white screen.
So i searched around the forum and the white screen seems normal.
so i runned the update software, but it stucks on verifying the information on your ipaq pocket pc.
and when i not put it in bootloader the progres bar stucks at 0.1%.
please help me.
best regards shailo
ps. sorry for bad english im dutch
i forgot to say it ends up in a error saying something about active sync error
my pc gives a bleep when i connect it
come on no body
Related
I was doing an Update to my i-mate Jam using ma_cdlsku2_arb_10300_141_10100_ship.exe but something in the middle of the upgrade went wrong, the computer rebooted.
When the computer booted up I tried to update again I turned the i-mate (Qtek S100) up it wont boot completly. I get the blue Imate screen and at the bottom right corner I see in red
NO GSM
D 1.03.00 WWE
and it stops there, I tried to run the MaUpgradeUt.exe and I got Error 120 Country ID ERROR, then I tried QtekS100_FRA_DT_10302_157_10100_For_MDA_T_Mobile.exe but nothing I get the same error.
I hard reset it and I get the USB written on the screen. I tried to run an upgrade but ma_cdlsku2_arb_10300_141_10100_ship.exe gives me error 101 connection problem and I tried QtekS100_FRA_DT_10302_157_10100_For_MDA_T_Mobile.exe and get the Error 120 Country ID error.
Please help what to do ?
Please help.
by the way, I baught this in Dubai, so I am no able to take it back to dealer to fix it. please help :?:
help... i downloaded smart1's (normal, not clean) update, and launched UPGRADE_ROM.DAT from PC... it said initializing and everything... and then it reached to "copying something.dll' ... i waited 10 minutes or so then i got something like:
"error cant copy ....... because connection closed from remote... something like that."
i did NOT touch the imate during the process
and now when i turn on my imate i get the HTC with white background for a second but then it freezes on the blue "i-mate" screen... displaying:
IPL 2.13.0001
SPL 2.13.0001
GSM 02.20.21
OS 10.1.0.811
when i connect it to pc, windows does recognise and install my device but ActiveSync doesnt connect.
i tried removing the battery then putting it back in then pressing and holding the conn. button along with the power button and i DO get to the bootloader screen (with three colors) and then when i plug in the usb i get a small 'usb' word at the bottom of the screen, but still, ActiveSync doesnt connect... i tried installing the update again... but the program doesnt find my device
how can i make it work again ??? plz help me
thx in advance
Now you need to find a rom that will install from bootloader mode and not an update........
I don't think you phone is dead
JD
johnnyduk said:
Now you need to find a rom that will install from bootloader mode and not an update........
I don't think you phone is dead
JD
Click to expand...
Click to collapse
i read in another topic what u said above... thx for ur reply...
btw, i'm currently downloading a 56 mb file called:
JAMin_WWE_2130923_21309112_020720_ship.zip
it can be downloaded from:
ftp://ftp.clubimate.com/JAMin_WWE_2130923_21309112_020720_ship.zip
or (better direct link)
http://www.clubimate.com/support/JAMMIN/ROM/JAMin_WWE_2130923_21309112_020720_ship.zip
i suppose this is the file i shoudl install right now using bootleader mode ? right ?
my previous rom version was 2.13.9.23 (same as name of file)
so is this the file i shud be downloading right now ?
thx a lot in advance
Just BEWARE that the rom you download is for your phone, it will be for a G3 or a G4, if you get it wrong, your phone is DEAD.
Please read the wiki and stickies....................................
JD
please. my phone doesnt move. it stuck on login screen.:
any way to restore it? i tried to hard reset, soft reset...nothing..
i tried to install smart 1 and after this happened
Problem solved
Same problem for me, but I solved today:
I connected the phone to pc in bootloader mode, the pc see the phone and says ppc usb sync, but the activesync not started.
I tried to install a qtek official rom by dangaard (you can find it here: http://www.megaupload.com/it/?d=4ELWL078 ) and I solded the problem !
Thanks god!!!!
Please i have the same issue with my O2 XDA Neo - G4, i checked the official site but i don't understand german. Pls someone paste me a link to official Rom.
Twinsis said:
Please i have the same issue with my O2 XDA Neo - G4, i checked the official site but i don't understand german. Pls someone paste me a link to official Rom.
Click to expand...
Click to collapse
ftp://ftp.clubimate.com/JAMin_WWE_213923_2139123_022021_ship.zip
here is the official link for O2 xda or Imate Jamin
Same problem!
I had same problem but in my case with downgrade from WM6 to ASERG rom, i have downloaded RUU_Prophet_220734_2207114_024721_NVID.exe and that fixed my problem.
Hi,
I'm almost broken down :'(
since days I'm trying everything to update the rom of my smartphone with the following operation system "XP and Vista".
I've got a Xda Touch diamond, but Vista says I've got a Touch Diamond P3700. Now let me tell you the catch-22:
I'm connecting the phone via usb cable to the pc(any usb-hub on the back of the pc)
Vista and Xp says "connected". Now I'm running RomUpdateUtility.exe. In the same folder
is the new rom called "DIAMIMG.NBH"
Now I'M clicking "Next" and again "Next". Now he says"verifing the information on your PDA Phone.. Please wait..
After that he says Current Information about you PDA Phone: Image version: 1.93.407.1
So now I'm clicking "update" the new Image version is 1.00.000.0
(If I use another Update Utility he says to Image Version 2.03.207.2)
Clicking "Next" and then again "Next" My Phone turns black and then the phone displays the three-color mode
and below the "serial" change to "usb" and a few
seconds later the phone shows a bar of 0% and on WinXP the bar also shows 0%.
Suddenly the connection is off. And a few minutes later the update Utility(PC) says EROOR(262) UPDATE ERROR.
I even disbaled the standby and hibernation modes on the PC. And I even tried flashing from Internal Storage!
ABsolutly futile! The three-color mode displays DIAM300, SPL-1.30.OliNex, MicroP-Diam (Led) v11,
Psoc_Diam STAGE_PVT v=x32
Is may Phone locked for new roms?
Please HELP ME before I'm going sick ´:__(
Best regards
Colbad
Welcome to forums
Hope this link helps
http://wiki.xda-developers.com/index.php?pagename=HTC_Diamond
Good luck,
nothing helps. I give it up!
I'll get me a new phone.
slow down lol,
dont rush out and get a new phone just yet.... all flashing problems are actually quite simple, you just need to be methodical and patient
Firstly, i always flash with XP, call me old fashioned but its what ive always done lol.
in the past when ive had 262 errors (whilst flashing my touch cruise RIP) the radio i had installed at the time prevented further flashes.
What you havent said is what your current rom is and what rom you are trying to flash.
Hi again
I bought me a new one!
my new htc touch diamond makes me also sick.
If I download from the HTC page the new software rom
there's no problem updating my Smartphone to 100%.
But if I try to use any foreign rom for updating he freezes by 0%.
What is that?
I can't use any foreign rom from other peoples,
I'm absolutly helpless to this issue.
Please help me anybody :=)
Best regards
COLbad
colbad said:
Hi again
I bought me a new one!
my new htc touch diamond makes me also sick.
If I download from the HTC page the new software rom
there's no problem updating my Smartphone to 100%.
But if I try to use any foreign rom for updating he freezes by 0%.
What is that?
I can't use any foreign rom from other peoples,
I'm absolutly helpless to this issue.
Please help me anybody :=)
Best regards
COLbad
Click to expand...
Click to collapse
Colbad,
Please tell me you have read the wiki or at least the stickys on how to flash with either hardspl or uspl etc??
If not ur gonna end up with a fancy looking brick.... what have you tried so far and from where?
sorry for bothering you.
I solved the issue finally
Now everythings fine.
Hi Everybody. This is my first post here
I own an HTC Touch (Vogue) from Orange (Spain) and I would like to install WM 6.1 on it. Orange does not provide with WM 6.1 and I found on the internet that there is a Sprint version of it, so I decided to install it. I get "Error 270" it says the image is corrupt. I tried to make an splxploit-windows and nothing happens... I took a screenshot (attached file) of what I get... and it stays there. Nothing happens at all.
I tried to install other versions also... HTC Magician and others just to see what happens and always I get "Error 270". The only one I could install successfuly is the Orange Rom
I tried everything and can´t find a solution. Any help there please?
Thanks a lot! =)
PD: I am using Windows XP, ActiveSync 4.5 and in SPLXPLOIT-WINDOWS I am following this steps (I get stuck in step 4)
1) manually start in bootloader mode
2) disable USB in activeSync
3) check 'usb' appears at the bottom of the tricolor screen and that he device is recognized by XP. If not, try unplugging/repluging
4) run the corrected unbrick.bat
5) while still in (new) tricolor screen after loader update, upload a new ROM
Any ideas?
This is not a complaint... this is just how I feel::
It is really frustrating to post something for 1st time in a forum looking for an answer and not to get anything in three days.
Welcome to forums
Have a deep read on Wiki here
Also visit Vouge section.
Read, Search, Respect and Enjoy!
Hi guys,
My Imate SP5 is stuck at the first screen where the IMATE logo (clubimate.com) comes up and then it does proceed any further ....and after about a minute it becomes blank.
I tried to do a hard reset but even that ended up in the blue screen .
I got it into the bootloader mode and tried to load a fresh rom . However the tera term pro says that it cannot open the device.
I am stuck at this point and cant proceed further ...
Please help
Farhan
Did you disable USB in Active Sync?