heeelp - JAMin, XDA Neo, S200 Software Upgrading

in upgrading wizard going to stop and my phone is stoped on qtek screen on boot after any hard or soft reset please help me what can i do?

Read Wiki!
I think you have Upgrade with a wrong Firmware Loader. What have he does? IPL/SPL Upgrade? Radio ROM? OS?
Normal ... you Flash the original QTek ROM back and it works.

Related

qtek s200 help!!!

i updated my s200 with a crossbow rom and now its dead
the update was sucssfull but when i push the power button the screen fliker for les than one sec and that it
my s200 will not go even to bootloader
any ideas ?
http://forum.xda-developers.com/showthread.php?t=292667
what ipl/spl do you have?
i have a G3 idont it was 2.20 i think
plz check again if its 2.20 or 2.21 and hope that its 2.20^^
edit:
mh you have g3 ... try the solution out that i mentioned before and try the cid unlock from pdamobiz.com... then reflash an older rom with spl/ipl.
edit:
the pdambiz can only be flashed when you are in align screen... if you have 2.21 take a wizard rom and go into align screen with active sync connection and flash the cid unlock rom.
if you have 2.20 then just try another prophet rom out and see if it works...
my s200 already cid unlocked
alright here is that one:
RUU_Prophet_2090732_20907115_020720_QtekGER_Ship.exe
sorry that its in german but its the only one I have right now... you can also change the language with some programm which is available here in the board..spl and ipl is included and it should downgrade you pda to 2.09
its an original shipped rom, they are always for g3 and g4 right? it doesn't say anything about that, anyways i used it on my g4 and it worked so you might wanna check out before as you have a g3 device, but I'm pretty sure it works for g3 and g4
so i maneged to get my s200 into bootloader
i now i have IPL 1.01 and SPL 1.01 but my device is G3
so i tried to flash RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe
and its start and when it reached 95% igot an error that says
"ERROR 326 ivalid command, the nfb file cannot be used with your pda phone
and one got and idea what to do ????
just now i tried to flash "RUU_Prophet_2090732_20907115_020720_QtekGER_Ship.e xe" and it fail at the first time
so i tried again and it sucsess
and now my qtek work again
i am verey happy
thanks for your help
how did u manage to get into bootloader
hi,
um facing the same problem and can not reach the bootloader screen....how did u do so...
please help

flashin Jamin with wrong flash for helpppppppp

flashin Jamin with wrong flash
--------------------------------------------------------------------------------
hi men
i have jamin g4 i flashed it and now i have this mixed bootloader
IPL 1.000
SPL 2.20.0001
i need ur help i am in this problem for 2 months
thanks
dr ebrahim
i don't see the problem. it's no biggy if you have different versions of ipl and spl. if it works, leave it like that
homw come no proble
my jamin stopped in bootloader i can not install any rom
original or cooked all going to end and after restart of phone again bootloader so i need help
thanks
uve bricked ur phone im afraid, nothing that can be done to bring it back!
if all is hopeless and your device is a G3, try http://forum.xda-developers.com/showthread.php?t=319636
(just part with spl first)
this worked for me, but as i sure learned from flashing ipl/spl 3.08 (before flashing ipl 3.08 of wizard and totally bricking my g3 prophet ), this is no guarantee for others
i tried the post but the same problem i am in bootloader as before
any new idea

Prblem during update to new ROM of Vodafone

Hi everyone,
my PDA (VPA Compact 2) is shutting down during every updateprocess (at 80%).
I try it a few time, but everytime the same problem.
WM5 ist not starting.
Everything I can see is the bootloader.
IPL 1.05
SPL 2.21
Can somebody help me?
What can I do?
Best regards
chicksor
chicksor said:
Hi everyone,
my PDA (VPA Compact 2) is shutting down during every updateprocess (at 80%).
I try it a few time, but everytime the same problem.
WM5 ist not starting.
Everything I can see is the bootloader.
IPL 1.05
SPL 2.21
Can somebody help me?
What can I do?
Best regards
chicksor
Click to expand...
Click to collapse
Custom build rom will not flash as your phone has IPL 1.xx,it must have IPL 2.xx and it shud be CID unlocked.Wm5 will not boot up as the original Bootloaders have changed,when you flashed Buttons rom to downgrade.
Now reflash Button's Rom 1.05 again in bootloaders and use lokiwiz02b to SIM/CID unlock the phone,after SIM/CID unlocking,upgrade to IPL/SPL 2.xx by flashing T-mobile 2.26,only after that it'll upgrade to any wm6 or 6.1 rom.But if you want to flash official vodaphone rom,download the official rom and flash it in Bootloaders.
Cheers !

help stuck in bootloader

right i have the g3 model with a german rom on so i wanted to upgrade i'll tell u what i did, 1st off i put fone into bootlader mode then run the rru for the hardspl, that said it had done so then i did the exact same thing to put the shadow 1.0 rom on and when it completed it wont come out of bootloader mode.... any help????
oh also dont know if this helps when i was flashing it didnt come up with any info in the rom version for my phone?
IPL 2.09
SPL 2.09 0000
GSM 02.07.20
UPDATE*** just run the hardspl on the bootlader screen and now when it boots i get the qtek splash screen? but nothing else
Ok. i had the same problem.. SO wot i did was to redo all the steps of flashing a rom. I did the hardspl all new... and then flashed a radio rom... nd then wm6.1 ro m of my choice it worked
thnks for ur reply, i found this 2 be helpful http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery ive now got wm5 but its in english which i wanted to achieve dont feel confident enough to go 2 wm6 lol

Trying to upgrade to win 6.1 but somehow fails..

Hi,
Im using a Qtek S200 G4 and Im a newbie.
Ive tryed to install Windows mobile 6.1 and the ROM patching seems to be successfull but when the phone reboots I cant get through the BOOT screen (three colors). I believe I´ve follow guides correctly. Now I have reinstalled the defualt rom for this phone again and it works fine.
I´ve also patched the phone with HardSPL G4.
The ROMs ive tryed ton install:
wm61_korand_3_1
RomProphetManila2D Diamond
Any suggestions?
Does no one have a solution for me?
Anyone please help me
sta1n said:
Anyone please help me
Click to expand...
Click to collapse
if you have already hardspl your device can you post what comes up in first boot screen Mine is like this
Code:
IPL 2.10.0001
SPL 2,G4.4PDA
GSM 02.19.21
With my phone you can see that the hardspl was successful because it displays
SPL 2.G4.4PDA

Categories

Resources