Database Info

qtek s200 help!!!

i updated my s200 with a crossbow rom and now its dead
the update was sucssfull but when i push the power button the screen fliker for les than one sec and that it
my s200 will not go even to bootloader
any ideas ?

http://forum.xda-developers.com/showthread.php?t=292667
what ipl/spl do you have?

i have a G3 idont it was 2.20 i think

plz check again if its 2.20 or 2.21 and hope that its 2.20^^
edit:
mh you have g3 ... try the solution out that i mentioned before and try the cid unlock from pdamobiz.com... then reflash an older rom with spl/ipl.
edit:
the pdambiz can only be flashed when you are in align screen... if you have 2.21 take a wizard rom and go into align screen with active sync connection and flash the cid unlock rom.
if you have 2.20 then just try another prophet rom out and see if it works...

my s200 already cid unlocked

alright here is that one:
RUU_Prophet_2090732_20907115_020720_QtekGER_Ship.exe
sorry that its in german but its the only one I have right now... you can also change the language with some programm which is available here in the board..spl and ipl is included and it should downgrade you pda to 2.09
its an original shipped rom, they are always for g3 and g4 right? it doesn't say anything about that, anyways i used it on my g4 and it worked so you might wanna check out before as you have a g3 device, but I'm pretty sure it works for g3 and g4

so i maneged to get my s200 into bootloader
i now i have IPL 1.01 and SPL 1.01 but my device is G3
so i tried to flash RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe
and its start and when it reached 95% igot an error that says
"ERROR 326 ivalid command, the nfb file cannot be used with your pda phone
and one got and idea what to do ????

just now i tried to flash "RUU_Prophet_2090732_20907115_020720_QtekGER_Ship.e xe" and it fail at the first time
so i tried again and it sucsess
and now my qtek work again
i am verey happy
thanks for your help

how did u manage to get into bootloader
hi,
um facing the same problem and can not reach the bootloader screen....how did u do so...
please help

I have SPL 2.21 and can't flash to WM6

Hello everyone,
I'm totally lost in this WM6 upgrade.
I've tried everything but i wont get my MDA Vario to flash with WM6.
My MDA Vario is unlocked (sim and CID) but i can't flash it because of my SPL 2.21????
This is what i have done:
installed button's 1.05 ROM
Download & installed lokiwiz - HTC Wizard Unlocker UPDATE Version 0.2b.
But stil my SPL is at 2.21.
Can someone please help me out here??
Thanks in advance!
Regards,
Schmia

Both your IPL and your SPL must be 2.xx and higher. After you flashed to Buttons rom. did you reflash to a higher version after after you unlocked and cid unlocked your phone to make sure both IPL and SPL were 2.xx or higher?

I've followed the tutorial:
16. Watch the rebooting of your PDA, if BOTH IPL and SPL are 1.xx then great. Quite probably your IPL will be 1.xx and your SPL will be 2.xx. Rerun the button 1.05 ROM downgrade a second time and it will become 1.x on both IPL and SPL. You don't need to redo the unlocking.
17. My suggestion, take for what it's worth, is to download and install the T-Mobile 2.26 ROM
This will give you a strong 2.26 IPL and SPL to work with.
My IPL was 1.XX after the 1.05 downgrade, but my SPL was still 2.21 even after the rerun.
I have tried to instal T-Mobile 2.26 rom, but it gave an error.

check if you have G3 or G4 unit

I have a 3G device.

Is there nobody who can help me???

schmia said:
Is there nobody who can help me???
Click to expand...
Click to collapse
I think that you haven't unlocked the phone properly. Read Dr. P's tutorial about unlocking G3 phones.
Kirby

if your ipl is 1.05 and your spl is still 2.21...then you need to reflash again so that both ipl and spl are 1.05 before you can proceed. ipl and spl should never be different.

WHen you downgrade to the Button rom, in most cases the IPL will change, but the SPL will not. You then have to downgrade again to get the SPL to get to 1.xx . There have been some cases reported where it takes reflahsing the button rom many times (like 8 times or somesuch) before the SPL will finally come down, but you have to complete this step or you will not be CID Unlocked.
Make sure you have your SD card out when you are flashing as this can cause problems.
Good luck, and sorry, but for those that have run into the stuck SPL there hasn't been a real solution other than keep flashing the button rom until it drops down to 1.xx. After that then the CID unlock will be complete and you can then flash the T-Mobile 2.26 rom (or whatever other 2.xx rom you want).

mfrazzz said:
WHen you downgrade to the Button rom, in most cases the IPL will change, but the SPL will not. You then have to downgrade again to get the SPL to get to 1.xx . There have been some cases reported where it takes reflahsing the button rom many times (like 8 times or somesuch) before the SPL will finally come down, but you have to complete this step or you will not be CID Unlocked.
Make sure you have your SD card out when you are flashing as this can cause problems.
Good luck, and sorry, but for those that have run into the stuck SPL there hasn't been a real solution other than keep flashing the button rom until it drops down to 1.xx. After that then the CID unlock will be complete and you can then flash the T-Mobile 2.26 rom (or whatever other 2.xx rom you want).
Click to expand...
Click to collapse
This should be added to the tutorials about Unlocking & Rom Upgrading.
And this quote also.
"if your ipl is 1.05 and your spl is still 2.21...then you need to reflash again so that both ipl and spl are 1.05 before you can proceed. ipl and spl should never be different."

Cing 8125 said:
This should be added to the tutorials about Unlocking & Rom Upgrading.
And this quote also.
"if your ipl is 1.05 and your spl is still 2.21...then you need to reflash again so that both ipl and spl are 1.05 before you can proceed. ipl and spl should never be different."
Click to expand...
Click to collapse
The Dr. P tutorial specifically says this (just not in those words). It tells you (after the last lokiwiz) to watch your screen and that you most likely will still have an SPL of 2.xx and will need to reflash (most people just don't read this and try to move on). The part of about having to reflash numerous times is new though. I've only heard of it a few times, but if you look at the posts from a month or so agao in the Dr P thread on unlocking you'll see where a few people ran into it and it took numerous flashes to finally get SPL to go to 1.xx.

before wm6 roms, every time there was a new rom for wm5 (molski or faria) you'd always get people in the thread mentioning that their ipl and spl are different. in those threads, the advice has always been to reflash a few extra times too. (I personally haven't had any problems with this...but i think i started my unlocking on a 1.8 us t-mobile rom with xelencin's rom...which had an unlocker built into the rom update package).
anyway, the phone's not bricked or anything, so you just have to keep flashing to get it working...
xelencin's rom (the first rom I ever flashed...)
http://forum.xda-developers.com/showthread.php?t=274205&highlight=xelencin

monkey_knight said:
if your ipl is 1.05 and your spl is still 2.21...then you need to reflash again so that both ipl and spl are 1.05 before you can proceed. ipl and spl should never be different.
Click to expand...
Click to collapse
I've re-flashed 3 times but if i understand correct, than i have to retry flashing until SPL and IPL are the same?
Regards,
Schmia

schmia said:
I've re-flashed 3 times but if i understand correct, than i have to retry flashing until SPL and IPL are the same?
Regards,
Schmia
Click to expand...
Click to collapse
yes. ipl and spl should both drop to 1.05. at that point you can go through the unlock and flash back up.

Thanks Guys!!!
With all your good advise, i finally have my MDA Vario flashed with a WM6 rom (TNT 2.0 Professional)
I'm really greatfull to you!
Now i have to find out what WM6 rom is the best for me.
Regards,
Schmia

Xda Mini S problem after flashing WM6. Still have WM5

Hey,
I installed a WM6 ROM, but after reboot I still have WM5 installed and O2 starts installing stuff. Does this mean my phone is CID locked? I had an IPL/SPL 1.05 and upgraded to 3.08 already. If I need to unlock do I have to downgrade back to 1.05 somehow? Can someone tell me what needs to be done?
Thanks!

isihie said:
Hey,
I installed a WM6 ROM, but after reboot I still have WM5 installed and O2 starts installing stuff. Does this mean my phone is CID locked? I had an IPL/SPL 1.05 and upgraded to 3.08 already. If I need to unlock do I have to downgrade back to 1.05 somehow? Can someone tell me what needs to be done?
Thanks!
Click to expand...
Click to collapse
your phone is cid-locked and should be a g3, and yes you have to downgrade to ipl/spl1 or 2 because with ipl/spl 3 you can´t cid-unlock your wizard
READ THIS
http://forum.xda-developers.com/showthread.php?t=298613

i have alrady unclocked and i made the upgrading but the OS still OS 5.1 not 6

problem upgrading kjam to wm6

hello all and thanks for the help
i have a g3 kjam after flowing the 3 steps
1.installing the rom that downgrade the ipl to 1.00
2.cid unlock
3.installing the rom that changes ipl/spl tp 3.08
any rom that i try to install finshes 100% succsesful
but still boot a wm5 rom with a new icon when starts
any help will be great
thanks

I thought you need a solid 2.xx rom to flash a new rom ??
Personally, I went from button 1.05 rom to TMobile 2.26 rom to new WM6 rom.
I flashed 3.08 later - as is does not change the O/S - only IPL/SPL. Did not find any benefit to it, so went back down to 2.26
Please note that there are freezing issues if you flash down from 3.08 to 1.05. Apparently the spl can freeze if you do this - and that is a problem. So, to play it safe - do not do that - thanks.
It is always recommended that you flash a solid 2.xx rom such as the TMobile one when going between the different WM6 roms available here - you may want to try that - go down to 2.xx, then upgrade to WM6

thats very good to know i'm actualy in a freeze spl is on 3.08
any idea hwo to downgrade?

I've attached a link to another thread about the freezing issue. Unfortunately, it does not give the answer as to how to fix it. But - should no one else answer on this - I would recommend that you send a private message to senior user "mestrini", and hopefully he can walk you through it.
http://forum.xda-developers.com/showthread.php?t=377038
I got my info from him as per the attached post. I do not have enough experience as to why it freezes - or how to fix it.
Good luck

Well,after downgrading to 1.xx and CID unlocking,its essential to upgrade to ipl/spl 2.xx for upgrade to wm6,its highly recommended to upgrade to 2.xx by flashing the T-mobile 2.26 for a solid base,but,however, you can still even upgrade to wm6 with ipl/spl 3.08.Wm6 works on 2.xx and 3.xx.
DGman
I believe your phone is still CID locked,you didn't do the CID unlock method correctly,but you upgraded to ipl/spl 3.08,now you can only CID unlock your phone by downgrading to 1.xx. Yes! SPL freezes if you downgrade to 1.xx from 3.08.So always first downgrade to 2.xx and then to 1.xx.Now I'll advise you to upgrade to IPL/SPL 3.08 again and then try to downgrade to 2.xx by flashing the T-mobile or Wizard_love Rom or official stock Rom of your carrier if other then T-mobile.If succeed to downgrade to 2.xx,only then flash Button's Rom 1.05 to get to 1.xx and apply the lokiwiz02b to CID unlock the phone.After that upgrade to 2.xx by flashing T-mobile 2.26 and upgrade to any wm6 Rom.
Cheers!

thanks for tring but device doesn't let me downgrade to 2.26 or any other 2.xx ipl/spl only stright down to 1.xx and like you said spl freeze on 3.08
when i tried wizard love it did the rom flash but still ipl/spl 3.08
i'll try to find my 2.xx official rom

Vox Update SPL (USPL) 1.34 - 1.35

hi,
I have just use the great work from jockyw2001 on the USPL 1.16 to make:
USPL 1.34 from RUU_Vox_HTC_FRA_1.34.406.1_4.1.13.54_03.10.90_Ship
USPL 1.35 from RUU_Vox_ORANGE_UK_1.35.61.1_4.1.13.60_03.18.90_Ship
Currently i use the RUU_Vox_HTC_WWE_1.34.405.1 and i have follow this thread
to upgrade from SPV650
use CID-Bypass 1.34 and RUU 1.34 to USPL 1.34
upgrade RUU IPL/USPL 1.35 with Vox-IPL-USPL-1.35.patched
All files have work for me, i hope this work for you to
Credits: pof and jockyw2001

This is still a soft SPL? What benefits does this serve over the previous uSPL by jocky?

lol~~~~
tested, both of USPL and hardSPL worked fine.
The hardSPL version is 1.35.0000Cy
Thank you for your great job.

h4waii said:
This is still a soft SPL? What benefits does this serve over the previous uSPL by jocky?
Click to expand...
Click to collapse
I dont know the change between the SPL 1.16 and 1.34/1.35. The patch
method was strictly the same. This is just for people like me who want
everytime the last release

I see.
Well thanks for your work in patching the new SPL. Hopefully somebody can merge or sticky this thread.

which file should i use for hard SPL? will it work forever means i can update any VOX unofficial ROM without running any SPL later?

It works as long as you don't flash an official ROM. It doesn't really matter which one you use. 1.16 is working perfect on my device, so should these!

frauhottelmann said:
It works as long as you don't flash an official ROM. It doesn't really matter which one you use. 1.16 is working perfect on my device, so should these!
Click to expand...
Click to collapse
1.16 is USPL means software SPL, i also use that to bypass CID and it needs to run everytime whenever you are flashing any ROM.
But my concern is if there is some Hard SPL and i run it on my VOX once, would i need to run USPL/HSPL again whenever i need to flash any ROM or will it work forever so that i can simply flash any ROM without using any SPL further.

If you FLASH uSPL instead of simply patching it through RAM, you will have an SPL that acts HARD until you flash an official ROM as it will overwrite the SPL since it is not a true HardSPL.
Take the same steps to patch uSPL and then instead of flashing your ROM, run FLASH.exe from within the uSPL directory, flash USPL and then flash your unofficial ROM. Patched uSPL will remain on the device and thus it will act as a HardSPL to any unofficial ROM and you will not need to patch SPL every time you flash an unofficial ROM.

Will this USPL allow me to flash an unofficial ROM on my Vox that has got the latest WM6.0 Orange UK ROM on?
Roland

Please help..
Hello, i have an Orange France SPV e650, every time i run sda application unlock thing it says "phone not unlockable" then it says succesfully unlocke, now it wasnt succesfully unlocked cos the flash does not work, stops at 3 percent.... Please help me I really look forward to ROM upgrade.
Thank you,
Sammy

BIG THANKS TO ChiemY
I can't believe how long it took me to solve this riddle lol. Was trying use Vox USPL- CID BYPASS for 1.16 and just took a lucky guess at using the number that seemed to be shown on the bootloader so often being 1.34 . It's my first time playing with WM HTC devices and it seems it will be smooth sailing from now on .

I flash HTC P3400 with Vox USPL and when phone restart that goes in blank screen, now it does not flsh anything, please help

I flash HTC P3400 with Vox USPL
I flash HTC P3400 with Vox USPL and when phone restart that goes in blank screen, now it does not flsh anything, please help

You have successfully bricked your device - may it rest in peace. The SPL is the part of SW that opens the door to other SW loading. If that does no more work you are lost.