Database Info

Ipl Spl 2.21 Solution.!!!

my prophet g4 device accidently flashed with 2.21 of wizard............
it was dead but now alive !!!!!!
cut of charger 2 wires inside. the + one (white) to pin1 of battery and the other wire to lowest pin 5. of the high voltage ur device will enter bootloader and stay in it !!!!!!!!!!!!!!!
connect usb cable and it will recognized =))))))))))))))
u can flash now to your earlier rom. in my case wwe 2.20 qtek rom with success. NOW device booting up again showing 2.21.0001 IPL AND SPL
but its working =))))))))))))
SO HAPPY !!!!! HOPE THIS WILL HELP U !

Wow!
Wizard bootloader in a prophet!
I bet you wont have the battery problem with a wizard's crossbow rom!

bootloader
hehe hope so i will test but now i wont touch it again for a while! it was very hard work finding this out.
i would like to mention everything is a little slow at least i think it is compared to earlier. maybe im wrong but this could be the result of the 2.21 ipl and spl

alphazero said:
hehe hope so i will test but now i wont touch it again for a while! it was very hard work finding this out.
i would like to mention everything is a little slow at least i think it is compared to earlier. maybe im wrong but this could be the result of the 2.21 ipl and spl
Click to expand...
Click to collapse
maybe you can repair your bootloader now.
I have an idea of how you could do it with g3.
Is your cid locked?
Is your phone g3 or g4?

phone
its g4 xda neo cid locked
UPDATED NOW NEW TESTS DONE. IPL SPL = 2.21
if i use prophet roms now everything is slow on device not usuable. i have to use wizard roms LOL. only problem then no sound is working. but replacing dll from prophet gives u sound back again. ........ THIS IS ****ING BULL****. anyway its usuable again now. i flashed now the fucing pbootloader of wizard into my device..........................
Hardreset does not work anymore if holding camera and other button it goes again back to bootloader now i need to find out how u do a hard reset on wizard LOL.
anyway i need a IPL AND SPL From prophet ............... extracting ipl and spl from qtek prophet and traslating it making a new nbf results in a flash process but after i stays on old IPL SPL ....................... ill report soon more about this strage problem having a wizard bootloader on Prophet.

omg this is ****ing weird
that that works is really strange^^ thank you though again you rescued my device hope its gonna work for me I'll report in the next days...
so if I'm doing thats right the whole thing is working, while you are connecting the wires get don't plug the wall chargare in so you don't have elictricity and cover up the rest of the pins im not sure if thats necessary but you don't wanna brick your phone even more the phone is turning of though as soon as you disconnect the wires... i'm having a prophet rom on it right now i'm trying a wizard rom now...
alright im running the wizard aku 3.2 rom now. its working very well except that i have to wires coming out of the back of my pda.
but ipl downgrade might be possible from there... so thank ýou alot the solution works

your welcome
i will make a paypal account now so u can donate me i guess this solution is very good and no need to pay for it =)
UPDATE: IM NOW ON 2.26 TMOBILE WIZARD NOW WITH IPL AND SPL 2.26 THIS IS WORKING ****ING GOOD AND TRUST ME ITS FASTER THAN MY PROPHET WAS EARLIER WITH PROPHET BOOTLOADER.
GET THE TMO 2.26 from FTP and flash it. it will update ur device (IPL + SPL )too 2.26 never mind of it
IPL DOWNGRADE is NO PROBLEM FOR ME u can extract rom hex edit the ipl part and version number i did that already my ipl now is again to low number (custom) 2.01 but spl i coudnt find out to edit. im working with winhex and primary memory editing since this is very dangerous i dont suggest to do it. only experienced users should do that
WARNING WARNING WARNING !!!!
I WANT TO REPEAT AT THIS POINT AGAIN DONT TRY THIS ON WORKING DEVICE!!! ITS JUST A SOLUTION IF UR DEVICE IS ALREADY DEAD!!!!!!

alphazero said:
my prophet g4 device accidently flashed with 2.21 of wizard............
it was dead but now alive !!!!!!
cut of charger 2 wires inside. the + one (white) to pin1 of battery and the other wire to lowest pin 5. of the high voltage ur device will enter bootloader and stay in it !!!!!!!!!!!!!!!
connect usb cable and it will recognized =))))))))))))))
u can flash now to your earlier rom. in my case wwe 2.20 qtek rom with success. NOW device booting up again showing 2.21.0001 IPL AND SPL
but its working =))))))))))))
SO HAPPY !!!!! HOPE THIS WILL HELP U !
Click to expand...
Click to collapse
can u take a pic for the wires?

wires
NO need to i will explain in detail.
1. Take ur phone and put it on ur table =)
2. Turn it so u can see the camera
3. On the right u see 6 Pins.
4. The Pin 1 is nearest to Camera
5. Pin 5 would be far away from camera.
u got it now ?

it worked for me with the sixth pin to by the way but that might be why it doesn't work without the wires for me yet.
did you cover up the other pins alphazero?
you were able to flash a lower bootloader back onto the device right with some kind of hexedit application or something?
I think a lot of users would be glad if you could upload a rom that can downgrade the ipl and spl including me , as you said it requires a lot of skill to cook the right rom...
thanks man

Just a quick one. If you can downgrade the ipl and spl to 1.xx.0000 or 1.xx.0001, could it be possible to do CID unlocking?

Downgrade
I could do compile a rom that downgrades ipl to whatever u want. the spl is coded and i need to find the place in a spl rom where version id is written.
i found out that the update rom process checks version id.
so theory is fooling of a lower rom a higher rom id. this means your downgrade rom will have a higher rom id.
im working on it right now. i have to do some test on university right now like many others please be patient.

alphazero said:
I could do compile a rom that downgrades ipl to whatever u want. the spl is coded and i need to find the place in a spl rom where version id is written.
i found out that the update rom process checks version id.
so theory is fooling of a lower rom a higher rom id. this means your downgrade rom will have a higher rom id.
im working on it right now. i have to do some test on university right now like many others please be patient.
Click to expand...
Click to collapse
Status: IPL DOWNGRADE OF ANY G4 successfull !
SPL DOWNAGE OF ANY G4 under work !

haha be patient and 2 minutes later you post it
spl 2.21 is working normally on the prophet anyway doesn't it?
can you upload that downgrade?

how is it coming ...did you find out anything new?
if you manage to downgrade ipl and spl to prophet version you are where you were before you flashed the wizard rom right?

answer
yes it would solve the accident wizard g4 rom flash on prophet!

but isnt spl on the prophet 2.21 anyways and only ipl is 2.15?

Dear Alphazero is it possible to solve wrong flashed g3 with jesterz g4 rom so now i can be only in bootloader mode and i can start flashing my prophet but please tell me how and what with On my bootloader screen now is written IPL 2.10 and SPL 2.20.0001. Please help me repair my prophet if it is possible
Should I do something with cutting battery pins?

uhm no the battery pins was because our device did only turn on if it was plugged into the charger, which meant you couldn't plug it into the usb at the same time to flash a new rom.
your problem is different and can't be solved with that solution... sorry sd goldcard i guess

Yes but i can only connect to mini usb and from bootloader i can flash it with battery full so please tell me shell i cut some pins from the battery and what with should i try to flash

qtek s200 help!!!

i updated my s200 with a crossbow rom and now its dead
the update was sucssfull but when i push the power button the screen fliker for les than one sec and that it
my s200 will not go even to bootloader
any ideas ?

http://forum.xda-developers.com/showthread.php?t=292667
what ipl/spl do you have?

i have a G3 idont it was 2.20 i think

plz check again if its 2.20 or 2.21 and hope that its 2.20^^
edit:
mh you have g3 ... try the solution out that i mentioned before and try the cid unlock from pdamobiz.com... then reflash an older rom with spl/ipl.
edit:
the pdambiz can only be flashed when you are in align screen... if you have 2.21 take a wizard rom and go into align screen with active sync connection and flash the cid unlock rom.
if you have 2.20 then just try another prophet rom out and see if it works...

my s200 already cid unlocked

alright here is that one:
RUU_Prophet_2090732_20907115_020720_QtekGER_Ship.exe
sorry that its in german but its the only one I have right now... you can also change the language with some programm which is available here in the board..spl and ipl is included and it should downgrade you pda to 2.09
its an original shipped rom, they are always for g3 and g4 right? it doesn't say anything about that, anyways i used it on my g4 and it worked so you might wanna check out before as you have a g3 device, but I'm pretty sure it works for g3 and g4

so i maneged to get my s200 into bootloader
i now i have IPL 1.01 and SPL 1.01 but my device is G3
so i tried to flash RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe
and its start and when it reached 95% igot an error that says
"ERROR 326 ivalid command, the nfb file cannot be used with your pda phone
and one got and idea what to do ????

just now i tried to flash "RUU_Prophet_2090732_20907115_020720_QtekGER_Ship.e xe" and it fail at the first time
so i tried again and it sucsess
and now my qtek work again
i am verey happy
thanks for your help

how did u manage to get into bootloader
hi,
um facing the same problem and can not reach the bootloader screen....how did u do so...
please help

Help Plz Plz Plz

I today installed the RUU_Prophet_220734_2207114_024721_NVID Rom on my existing Smart 1v2 it went fine but then at 95% it stopped saying .nbf file not supported with ur model now it only opens in bootloader mode n when i tried the JAMin orignal ROm JAMin_213923_2139126_022021_ship it says get a new one
PLZZZzzzzzzz someone help cuz Imate has only released this ROM............

try several times...sure it will work

Which rom should i try the NVID one or my JAMin ROm

Dude i tried like 7 or 8 times everytime i get the same errors
for the NVID I GET at 95 % this error
Error [326] INVALID COMMAND
this NBF file cannot be used for your PDA phone.Please check your NBF file.
for the imate rom i get at the beginning
rror [296] Upgrade only
This NBF cannot be used for your phone.Please get newer NBF.
PLZ help im totally stuck wat should i do,,,,,,,,,,,

Fady said:
Dude i tried like 7 or 8 times everytime i get the same errors
for the NVID I GET at 95 % this error
Error [326] INVALID COMMAND
this NBF file cannot be used for your PDA phone.Please check your NBF file.
for the imate rom i get at the beginning
rror [296] Upgrade only
This NBF cannot be used for your phone.Please get newer NBF.
PLZ help im totally stuck wat should i do,,,,,,,,,,,
Click to expand...
Click to collapse
Put the device into bootloader and flash with an official ROM.

The device only opens in bootloader now n by da way i cannot use my imate official Rom so which should i try now............

Try downloading the official i-mate Jamin ROM. When you've downloaded the ROM skip the first to steps. Before it checks the device reset the device so you will have an USB connection. If you wait to long the USB connection gets lost.

You did a mistake when you upgrade to the useless 3.08 IPL SPL, I think you have less feature now with official ROMs
You can't flash your phone with any official NBF (ROM) unless you unlock the CID, to downgrade IPL SPL
Unlock your CID I think you have a G3 device and you can install any ROM you want, if you don't what G3 mean, look what G device you have in the WIKI
If you have G4 the only solution is Extract the NBF and make a new one without IPL SPL and you can install any ROM you want
But you didn't brick your phone ask before any step you will make before you brick it

Yes i have a G3 device n how can i unlock the CID plz tell me the steps n I will do as you will say...............

Ive searched in wiki but the unlocking has been tried on ipl spl 2.09-2.20
would it work on my stupid IPL SPL 3.08
Dude just gimme all the steps i should do now n the links for any softs I need if u can n Plz tell me how can i get rid of this stupid IPL SPL 3.08 Again
THANX A LOT IN ADVANCE
Waiting for your Reply!!!!!!!!!!!!!!!!!
N also my device opens in bootloader only...................

look at this thread - it should help
http://forum.xda-developers.com/showthread.php?t=300356
also the first post on page 3 of that thread has a link to the instructions to CID unlock a G3
Good luck
Fady said:
Ive searched in wiki but the unlocking has been tried on ipl spl 2.09-2.20
would it work on my stupid IPL SPL 3.08
Dude just gimme all the steps i should do now n the links for any softs I need if u can n Plz tell me how can i get rid of this stupid IPL SPL 3.08 Again
THANX A LOT IN ADVANCE
Waiting for your Reply!!!!!!!!!!!!!!!!!
N also my device opens in bootloader only...................
Click to expand...
Click to collapse

I see ok lemme check the site.........

Thanks A lot man I owe u one Now lets see if its workin for ME............
can I downgrade to my older IPL SPL vers..........

No - once you have upgraded ipl/spl you are stuck with them. Do not got to v 3.08!!!
Fady said:
Thanks A lot man I owe u one Now lets see if its workin for ME............
can I downgrade to my older IPL SPL vers..........
Click to expand...
Click to collapse

Doesnt matter now if im stuck well it WORKED my JAMin is again alive Thanks a lot again for telling me the link n thanks a lot for helping everyone out with the nb2nb tools n stuff n all the instructions n thanks to everyone for their advices All u senior members rock...........................

Fady said:
I today installed the RUU_Prophet_220734_2207114_024721_NVID Rom on my existing Smart 1v2 it went fine but then at 95% it stopped saying .nbf file not supported with ur model now it only opens in bootloader mode n when i tried the JAMin orignal ROm JAMin_213923_2139126_022021_ship it says get a new one
PLZZZzzzzzzz someone help cuz Imate has only released this ROM............
Click to expand...
Click to collapse
try to upgrade to latest Radio Rom and then try to upgrade the latest rom u would see its running ok

Highes IPL/SPL Versions win!
If you have install IPL/SPL 3.08 ... no downgrade in the moment!

Wats the advantage of this IPL SPL 3.08
i have only seen one change n its that I cant get my imate rom back without editing it n removing IPl Spl from it...............

u try try this method.
i found the solution. i get this <RUU_Prophet_220734_2207114_024721_NVID>
rom before. i try this rom can complete to fixed the bootloader screen!
thx a lot
i think maybe the wm6 rom cht have the problem , then make the machine cannot finish to flash the system.

flashin Jamin with wrong flash for helpppppppp

flashin Jamin with wrong flash
--------------------------------------------------------------------------------
hi men
i have jamin g4 i flashed it and now i have this mixed bootloader
IPL 1.000
SPL 2.20.0001
i need ur help i am in this problem for 2 months
thanks
dr ebrahim

i don't see the problem. it's no biggy if you have different versions of ipl and spl. if it works, leave it like that

homw come no proble
my jamin stopped in bootloader i can not install any rom
original or cooked all going to end and after restart of phone again bootloader so i need help
thanks

uve bricked ur phone im afraid, nothing that can be done to bring it back!

if all is hopeless and your device is a G3, try http://forum.xda-developers.com/showthread.php?t=319636
(just part with spl first)
this worked for me, but as i sure learned from flashing ipl/spl 3.08 (before flashing ipl 3.08 of wizard and totally bricking my g3 prophet ), this is no guarantee for others

i tried the post but the same problem i am in bootloader as before
any new idea

Can i flash rom in bootloader?

i got elfin and i want to ask if it is any way to flash rom in bootloader mode,i want just to got my htc working again and my device is stucked at bootloader showing in right top corner RUU and on left IPL And SPL numbers.

ms2405 said:
i got elfin and i want to ask if it is any way to flash rom in bootloader mode,i want just to got my htc working again and my device is stucked at bootloader showing in right top corner RUU and on left IPL And SPL numbers.
Click to expand...
Click to collapse
hey, i just took a brief look in the elfin section. Go there and look at the stickies, there are guides for un bricking yoiur elfin and a good guide on how to correctly hardspl and flash....DO READ THEM (and you normally should flash a rom from bootloader in any case )
If you dont want to hardspl, then try the uspl way. You didnt say what rom you had tried to flash or wot you have done to get it stuck in bootloader.
Also are you using vista or xp on your computer?

i'm using xp on my comp,i got to bootloader because i tried to flash some roms and when i tried last time flashing onyx one it showed me error message and then started the problem.

ok, did u hard-spl sucessfully? what is you ips/spl shown on bootloader?

IPL is 2.26.0002
SPL is 2.26.0000 and as i said in right top corner RUU,
i've tried to flash it from sd card,but it ain't worked andlooked at goldcard method and i haven't got another winmo devic and don't know somebody who has,please help me to unbrick my phone,it was both from orange uk.

ms2405 said:
IPL is 2.26.0002
SPL is 2.26.0000 and as i said in right top corner RUU,
i've tried to flash it from sd card,but it ain't worked andlooked at goldcard method and i haven't got another winmo devic and don't know somebody who has,please help me to unbrick my phone,it was both from orange uk.
Click to expand...
Click to collapse
Please have a look at post 3 from here : http://forum.xda-developers.com/showthread.php?t=408637
Is this what you have tried doing previously?
Did you unlock your elfin first if it is locked on orange network?
If you cant get it working after trying this, go back to first link above and flash back an original stock rom, at least ur device will be working again!!
ps when u hardspl and tried to flash, did u disable antivirus on PC, and disconnect all other non essential usb devices? This is an commen cause of bad flashes, also try other usb ports, 2 of mine i cant flash on, 2 i can (which is wierd) - (i have experienced this myself).
If any of this doesnt help, as for help in the elfin section, but DO describe all your steps properly and fully and enclose links of roms tried etc so someone with an elfin can see what you have donw and save unnecassary posts etc.

mate,the link you gave me is that when i upgraded my elfin when it was working, i don't know what you mean about unlocked it is sim unlocked what about cid i really don't have idea,because i couldn't connect to mtty,please can you give me the link for original stock rom for my elfin,because i haven't done backup and i downloaded one but i don't know how to put in when i got in bootloader only and can't connect acivesync please tell me how to this aswell,PLEASE HELP ME UNBRICK MY ELFIN!!

Have you resolved this?
Search and download a stock rom from HTC or from here, use the search and wiki, you will find one there.
When you plug in ur elfin into the computer and put it in bootloader, do you see "USB" on the screen along with ur ipl and spl?
You should, and if you do you should be able to flash the stock rom on.