i got elfin and i want to ask if it is any way to flash rom in bootloader mode,i want just to got my htc working again and my device is stucked at bootloader showing in right top corner RUU and on left IPL And SPL numbers.
ms2405 said:
i got elfin and i want to ask if it is any way to flash rom in bootloader mode,i want just to got my htc working again and my device is stucked at bootloader showing in right top corner RUU and on left IPL And SPL numbers.
Click to expand...
Click to collapse
hey, i just took a brief look in the elfin section. Go there and look at the stickies, there are guides for un bricking yoiur elfin and a good guide on how to correctly hardspl and flash....DO READ THEM (and you normally should flash a rom from bootloader in any case )
If you dont want to hardspl, then try the uspl way. You didnt say what rom you had tried to flash or wot you have done to get it stuck in bootloader.
Also are you using vista or xp on your computer?
i'm using xp on my comp,i got to bootloader because i tried to flash some roms and when i tried last time flashing onyx one it showed me error message and then started the problem.
ok, did u hard-spl sucessfully? what is you ips/spl shown on bootloader?
IPL is 2.26.0002
SPL is 2.26.0000 and as i said in right top corner RUU,
i've tried to flash it from sd card,but it ain't worked andlooked at goldcard method and i haven't got another winmo devic and don't know somebody who has,please help me to unbrick my phone,it was both from orange uk.
ms2405 said:
IPL is 2.26.0002
SPL is 2.26.0000 and as i said in right top corner RUU,
i've tried to flash it from sd card,but it ain't worked andlooked at goldcard method and i haven't got another winmo devic and don't know somebody who has,please help me to unbrick my phone,it was both from orange uk.
Click to expand...
Click to collapse
Please have a look at post 3 from here : http://forum.xda-developers.com/showthread.php?t=408637
Is this what you have tried doing previously?
Did you unlock your elfin first if it is locked on orange network?
If you cant get it working after trying this, go back to first link above and flash back an original stock rom, at least ur device will be working again!!
ps when u hardspl and tried to flash, did u disable antivirus on PC, and disconnect all other non essential usb devices? This is an commen cause of bad flashes, also try other usb ports, 2 of mine i cant flash on, 2 i can (which is wierd) - (i have experienced this myself).
If any of this doesnt help, as for help in the elfin section, but DO describe all your steps properly and fully and enclose links of roms tried etc so someone with an elfin can see what you have donw and save unnecassary posts etc.
mate,the link you gave me is that when i upgraded my elfin when it was working, i don't know what you mean about unlocked it is sim unlocked what about cid i really don't have idea,because i couldn't connect to mtty,please can you give me the link for original stock rom for my elfin,because i haven't done backup and i downloaded one but i don't know how to put in when i got in bootloader only and can't connect acivesync please tell me how to this aswell,PLEASE HELP ME UNBRICK MY ELFIN!!
Have you resolved this?
Search and download a stock rom from HTC or from here, use the search and wiki, you will find one there.
When you plug in ur elfin into the computer and put it in bootloader, do you see "USB" on the screen along with ur ipl and spl?
You should, and if you do you should be able to flash the stock rom on.
Related
Hello
I Do Upgrade for my JAMIN with PDAMobiz_Prophet_WM5AKU3.2_v3220 & it was Succeed With out any trouble
Than I Try to upgrade to 2006-11-12_Prophet_WM5AKU2.3_lvsw_edition but my Phone Stack So I reset as say after 30 m (about 48m)
The Baggiest Problem for me after reset my Jamin Stack in Booting (Just show Rom Version & Other) after that noting Happen..
I tray to format But also same. I tray to boot from USB & Install Original ROM I get This Error
ERROR [296] UPGRADE ONLY
This NBF file connects used for your PDA Phone. Please get newer NBF file.
Is there any way to erase ROM and Re Upgrade with Old ROM
I Tray to Upgrade with Latest Update PDAMobiz_Prophet_WM5AKU3.2_v3231
But fail because this Upgrade required synchronization with Pc ..
Until now I lost Every Thing My Phone is Similar to Dead
Please help me
Please change your topic title so it makes sense!
Second you should read before flashing your device... ...you havn't provide us with enough info, is your device CID unlocked? What SPL version do you have, do you have an G3 of G4 device?
Did you try to turn on your device and on the 3 color screen execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 again?
mccune said:
Please change your topic title so it makes sense!
Click to expand...
Click to collapse
Sorry for my title ...
mccune said:
Second you should read before flashing your device... ...you havn't provide us with enough info, is your device CID unlocked? What SPL version do you have, do you have an G3 of G4 device?
Click to expand...
Click to collapse
I Don't know about CID
My SPL 1.2
My Device G3
mccune said:
Did you try to turn on your device and on the 3 color screen execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 again?
Click to expand...
Click to collapse
I did it & connect to usb but when i execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 it's show me No Device Connect
Thanks for you
You had to CID unlock your phone first!
The only thing you can do I guess is install the NoVendorID Asia version for the Dopod.
You can't install the PDAMobiz ROM because there has to be an AS connection.
Try looking for: RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip on the XDA ftp.
Thanks
But Can you Tell me how to Unlock CID (What does mean CID?)
wa7eed said:
Thanks
But Can you Tell me how to Unlock CID (What does mean CID?)
Click to expand...
Click to collapse
You should try to flash your device with the ROM mentioned before.
After that you can try to CID Unlock your phone:
Wiki for Prophet
The CID part
You're lucky you didn't brick your device
First Thanks for all
MY STORY
I try to flash my device with ROM RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_S hip-NoVendorID.zip and I was very happy because it’s start to flash ROM but after rich 95% it’s stop and show me Error INVALED COMMAND ... I tray many times but all same
Even my device now when ever I turn ON it’s go to boot loader mode
Correction my SPL 2.20
Just today I notice I write it wrong 1.2
Waiting for your reply...
Again Thanks
Thanks for you mccune so match for Help & all staff in this great forum already I restore my Live (I mean My Device)
I have to update to this ROM RUU_Prophet_220734_2207114_024721_NVID.exe
Thanks again for all
Hi guys,
I've just implemented a Vox USPL which allows you to flash any Vox ROM updates, i.e. you can flash any *official* ROM even if your phone's model and vendor ID doesn't match. It's confirmed that you can also flash cooked ROMs
This SPL is based on original Vox 1.16 SPL but includes 3 patches:
1) g_cKeyCardSecurityLevel = 0 (set 32)
2) Does not check Model & Vendor ID
3) Does not check signature*
(*) code must be formally signed i.e. contain properly-formatted signatures on the right places, however no checking is performed against them.
This means you can flash ANY ROM to your Vox after running USPL on it, no need to pay for CID unlock anymore!
The USPL will *not* help you to SIM unlock your device. You still have to pay for that.
The USPL runs in RAM and is *not* flashed to your device, so there is no risk there. Once it runs you can run any official Vox ROM update utility.
The USPL does *not* permanently CID unlock your phone, like the CID unlocker from imei-check or so.
After you flashed a ROM your phone is again CID locked. Each time you wonna flash a ROM with a different model and/or vendor ID (different from your phone) or a cooked ROM, you must run the USPL again and then flash the ROM.
It's beta and untested and the risk is entirely yours !! Don't blame me if you brick your phone
EDIT:
You can now also flash the USPL allowing you to flash any unsigned (cooked ROM or ROM module, e.g. radio or OS) or signed ROM with any model/vendor ID. The USPL substitutes your SPL until you perform a full ROM update. Consider it as an extra insurance in case something goes wrong with flashing cooked ROMs or any other ROM update !
Instructions:
1. Run the USPL (Vox USPL- CID BYPASS.zip)
2. Run the ROMUpdateUtility.exe (Vox-USPL-RUU.zip)
Have fun,
JockyW
The attachments:
SDA_ApplicationUnlock.zip : application unlocker if u need it
mtty1.42.zip : terminal emulator (not neccessary if u only do ROM updates, but if you wonna play with the bootloader commands you need it)
Vox-USPL-RUU.zip: flash version of USPL (Note: you must first run USPL from "Vox USPL- CID BYPASS.zip" before you can flash it with ROMUpdateUtility.exe from Vox-USPL-RUU.zip !!!)
Vox USPL- CID BYPASS.zip : instructions included
Credits: in particular to pof. This USPL and also the one for Excalibur is based on his USPL for the Elf. See here
I think this is one of the most fantastic news of the century!!!
Finally some cooking can start on this little device.
Thanks again,
Ka.
noob question
what the difference between sim unlock and cid unlock?
This can be found in various threads around here, anyway.
SIM Lock - You can't use a SIM from a different provider than the one who sold you the phone.
CID-Lock - You can't flash your phone with a ROM which hasn't been cooked by your provider (or manufacturer for HTC unbranded phones).
Ka.
jockyw2001 great but make one for htc oxygen pls.
htc s710 - rom
confirm this is working very gd
thanks for all yoru help and support to this fourm
hi, i tried the method described and when it runs haret my vox shuts down... and nothing happens, i have to turn it on myself.
madds said:
hi, i tried the method described and when it runs haret my vox shuts down... and nothing happens, i have to turn it on myself.
Click to expand...
Click to collapse
Same here
anyone online right now wanna drop me a line about this... what do I do exactly with the ruu file. Do I place rom image in that folder while runnning update???
so i followed the instructions and executed the cid bypass(installed itsutils and haret). once i get to the end it says use mtty or flash with RUU. so I attempt to flash right after (am I supposed to flash while the screen is black) but its gives me a connections error. I figure its because the phone is off. So I turn it on and update with the RUU again but only make it to 3% before I get a invalid vendor id. Would anyone care to comment on how I can flash this vox to the dopod rom...
madds said:
hi, i tried the method described and when it runs haret my vox shuts down... and nothing happens, i have to turn it on myself.
Click to expand...
Click to collapse
acid74 said:
Same here
Click to expand...
Click to collapse
To the users who had the same problem as me I am currently flashing my phone and I managed to get past my problem by using the SDA Application unlocker on my vox. I always thought that HTC were already application unlocked. Was going crazy for a while but I guess I should've followed the instructions step-by-step regardless of what I thought.
Big up to jockyw2001(and of course pof for without him alot of us would still be using shipped rom) for this wicked tool.
Cheers
neptune said:
To the users who had the same problem as me I am currently flashing my phone and I managed to get past my problem by using the SDA Application unlocker on my vox. I always thought that HTC were already application unlocked. Was going crazy for a while but I guess I should've followed the instructions step-by-step regardless of what I thought.
Big up to jockyw2001(and of course pof for without him alot of us would still be using shipped rom) for this wicked tool.
Cheers
Click to expand...
Click to collapse
Thanx man,last night i figured it out too......hows the dopod ROM??
acid74 said:
Thanx man,last night i figured it out too......hows the dopod ROM??
Click to expand...
Click to collapse
I only got this phone so I could upgrade it for a friend to stop the boot loop. It seems to have fixed that problem so I guess it's better than the other roms. On the other hand I can't stand smartphone's so my suggestion is to ditch your SP and switch to PPC . Also I read before hand that this ROM doesn't include Windows Live Messenger but it is included in the rom. Just thought I'd let u guys know.
input please
Just ran into another problem and would appreciate some input. I understand that USPL only works for one flash...but I wasn't aware that a hard reset counted as a flash. Regardless my device hung at the dopod boot screen after a hard reset. Is this normal after using USPL on a device, and if so does this occur with all devices??? I would hate to give a phone back and have to tell the person that they can't perform a hard reset...
neptune said:
Just ran into another problem and would appreciate some input. I understand that USPL only works for one flash...but I wasn't aware that a hard reset counted as a flash. Regardless my device hung at the dopod boot screen after a hard reset. Is this normal after using USPL on a device, and if so does this occur with all devices??? I would hate to give a phone back and have to tell the person that they can't perform a hard reset...
Click to expand...
Click to collapse
If you flash a full ROM the SPL is overwritten with the one in the ROM (Dopod = 1.19). Nothing to do with USPL. Booting can take a long time after hard reset. Unplug battery and try again.
jockyw2001 said:
If you flash a full ROM the SPL is overwritten with the one in the ROM (Dopod = 1.19). Nothing to do with USPL. Booting can take a long time after hard reset. Unplug battery and try again.
Click to expand...
Click to collapse
Thanks, I got it to work eventually...Good to know USPL doesn't effect hard resets, I guess you learn something new everyday.
If I had to take a guess before hand I'd figure a SP would boot faster than a PPC, but I realize now that I'd be wrong...
thanks to all for the help, I can finally return this Vox back to its owner
cheers
Hi
I flashed my E650 in French with the swissrom (present on FTP), all works !
an idea to change the logo operator to HTC original ?
thanks
thought I fixed the problem. seems as if after a day it just hangs at the dopod screen. It was working fine everytime I had it. As soon as I give it back it seems to hang. Guess ima just flash it back to the HTC rom, too much hassle for just $20.
why SDA_ApplicationUnlock.zip can't unlock my Orange SPV E650?
Successful rom flash done on a spv e650 on a sim unlock device UK orange
Hi,
I downloaded Official WM 6.1 Upgrade from HTC http://member.htc.com/downloadfiles....0_radio_sign_25.83.40.02_1.65.16.25_Ship.zip
and after running that... My system is dead slow and also unable to install few program like Schap's Advance Configurator etc and other issues like
System Reboot time increases....
GPS taking too much time for a Fix
Menu Pop down slowly...
Stucks quite often
.... And after every hour or so the Message popup like that " Please Inform Microsoft about this issue ...... "
Since i am not a computer Geek... Please advice some simple solution ...
Though i also download the official RUU from HTC which released on 21-2-08 but when i run that it tells me that " THIS UPDATE IS NOT FOR YOUR DEVICE " after the SPL screen...
So, is there anyway that i revert back to original System dated 28-8-07
Ur help in this would be highly appreciated....
And PLEASE accept my appologies is this issue has already been raised here...
not sure what you mean by dead slow. First off, the warning that you get that the rom isn't for your device tells me you are not CID unlock. You can always CID unlock your phone and then put it back to the original SPL if you want to keep things back to normal.
Thanks for the reply.....
thomassster said:
not sure what you mean by dead slow. First off, the warning that you get that the rom isn't for your device tells me you are not CID unlock. You can always CID unlock your phone and then put it back to the original SPL if you want to keep things back to normal.
Click to expand...
Click to collapse
Well it takes time to respond to the command... e.g. if i click on the START then it took quite a time for a menu to pop down....... as far as CID unlock... i am not sure....
But i purchased my tytn II from UK as a sim free unit @ 455 pounds... and before that WM 6.1 upgrade, i never played with the ROM or firmware... no SPL nothing anysort run on my unit.... I just run the RUU directly from PC and follow the on screen instructions....
which spl are you using ?
kuzco1 said:
which spl are you using ?
Click to expand...
Click to collapse
currently in Bootloader it shows...
KAIS130
SPL-3.28.0000
CPLD-8
I tried to update HardSPL 3.29 on my friend's Kaiser from AT&T. But it still stucked.
I run SDA-Unlocker .It shows ok.
After serveral tries the phone stucked So i use Kaiser SuperCID and Security Unlocker v0.1 by ockyw2001SPL and do step 1. I don't know what i have exactly done.
During copy it stays at 95 % !
Now every time i boot the device it shows only the bootloader
KAIS1*0
SPL-3.56.0000
CPLD-8
Seial
I can't upgrade other ROM any more.
I think i should take HardSPL 3.56force USB ? because ATT already has SPL 3.56 and WM I 6.1
What have i to do now ? I'm a little confuse because the phone of my friends. That is the gift from his brother. :-(
read this then go to the sticky at the top of this forum and follow the links to the right thread for you to ask this in, good luck.
Ok ! I folow http://forum.xda-developers.com/showthread.php?t=420683
and tried to flash SPL 3.29 again. But it still stucked at 0%.
I will try the SD version.
Other question: should the battery loading at in bootloader ?
Hi,
Try re-flashing the stock ROM for the phone. You'll either find it on the wiki or on your carriers website.
Any more problems, please post in this thread : http://forum.xda-developers.com/showthread.php?t=423486 (after reading the 1st post o/c)
Dave
This may be a little long winded but !!
I am the proud! owner of a Vodafone badged Touch Pro, now probably a brick.
I think you can see whats comming.
Having read through the info on flashing ROM, I followed the guide ie instal Hard SPL then radio then flash the rom.
The Hard SPL went fine and reported 1.40.OliNex on the boot loader screen.
I didn't upgrade the radio so went straight on to the ROM flash following the instructions from http://forum.xda-developers.com/showthread.php?t=416211
All appeared well until the reboot where the phoone freezes on the network logo screen.
I can get onto the boot loader screen and rightly or wrongly have managed to get the SPL back to 1.90.0000.
But that is it.
Is there any hope or do I now have a rather expencive paper weight
(I have searched the site but I can't find anything which quite matches my problem).
I thought it was supposed to be 1.90.OliNex
Can you flash any other om over it?
Azzaroth said:
Having read through the info on flashing ROM, I followed the guide ie instal Hard SPL then radio then flash the rom.
The Hard SPL went fine and reported 1.40.OliNex on the boot loader screen.
Click to expand...
Click to collapse
Why did you flash HardSPL for Diamond on your Touch Pro?
Very good question.
Must have had a brain dump, but whats done is done. The only question is there anyway back?
Have you tried to flash some ROM to the phone? You can do that from the bootloader.
I'm vary wary of flashing it again unless it is with a known good ROM that is for the Touch Pro.
Any examples or ideas would be welcome
Of course, the best ROM is latest official, you can get it here - http://www.genghis.be/_HTC Touch Pr...igned_Raphael_52.58.25.30_1.11.25.01_Ship.rar, or on HTC official page - http://www.htc.com/www/SupportDownload.aspx?p_id=140&cat=2&dl_id=501.
Can you get it into bootloader? I doubt it, but that may be your only hope. Flashing the wrong hard spl is a sure way to kill your phone.
have you tried? http://www.ppcgeeks.com/forum.ppcgeeks/showthread.php?t=42503&highlight=hard+spl+touch+pro
jpwhre said:
have you tried? http://www.ppcgeeks.com/forum.ppcgeeks/showthread.php?t=42503&highlight=hard+spl+touch+pro
Click to expand...
Click to collapse
Why are you posting that link? You want him to really brick his device or what? Can't you see that he has a GSM device, not CDMA? Do you know that flashing CDMA SPL on GSM device means bricked device? Don't post if you don't know basic things, please!
Farmer Ted said:
Can you get it into bootloader? I doubt it, but that may be your only hope. Flashing the wrong hard spl is a sure way to kill your phone.
Click to expand...
Click to collapse
Thanks for all the info I'll get on to it ASAP.
In answer to boot loader screen, yes I can get on to it.
The http://www.htc.com/www/SupportDownlo...at=2&dl_id=501. link.
When I enter my serial number it returns"Sorry, this software download is not suitable for your device".
image
http://forum.xda-developers.com/showthread.php?t=427507
i uploaded the vodafone image a while ago so it sould stil be there if not pm and i cann attach a link for you,
might be worth tryingto flash from your sd card
good luck
The image is still there file:///E:/Desktop/ROM/RUU_Raphael_HTC_WWE_1.90.405.1_Radio_Signed_Raphael_CRC_52.33.25.17_1.02.25.19_Ship.exe
However it returns a 294 error (Invalid Vendor ID).
Azzaroth said:
The http://www.htc.com/www/SupportDownlo...at=2&dl_id=501. link.
When I enter my serial number it returns"Sorry, this software download is not suitable for your device".
Click to expand...
Click to collapse
Yes, I forgot that your serial number indicates that you have a Vodafone branded phone, and that ROM is for non-branded phones. Try the other link, no need for serial numbers.
I just tried the other link but this returned the 249 error (Invalid Vendor ID)
Azzaroth said:
I just tried the other link but this returned the 249 error (Invalid Vendor ID)
Click to expand...
Click to collapse
I assume that your not Hard SPL-ed properly then.
I'd go along with that. At the mo the boot loader reads:
RAPH100
SPL-1-90-0000
MicroP Raph (LED) v13
MicroP Raph (KEY) v5
PSOC-Raph STAGE_CVT v0x36
If thats of any help?
Well, since there's no mention of Olinex at the bootloader, you're not Hard SPL-ed. I don't know is it possible to flash Hard SPL from bootloader (think not), so I recommend that you first flash a Vodafone ROM from here - http://rapidshare.com/files/244098894/Vodafone_uk_5_10_161_1_WWE.7z.html (and here is the thread - http://forum.xda-developers.com/showthread.php?t=518937&highlight=vodafone+rom), and then, with fully functional phone, you can do a Hard SPL by following instructions here - http://forum.xda-developers.com/showthread.php?t=410150. After that you should be able to flash ROMs as you wish, but they have to be for Touch Pro GSM. Here is the thread you should read after flashing Hard SPL - http://forum.xda-developers.com/showthread.php?t=448008.
Edit: found another Vodafone ROM, if you fail flashing the first one, you can try this - http://rapidshare.com/files/147978863/vodafone.rar.html.
I'll give it a go, the phone was HardSPL'd but reverted to the stock, which has probably compounded the problems.