Related
I need to cid unlock my prophet(s200,jamin)
I tryed with the software in wiki-developers
but it makes problem does anybody help me by cid unlocking for chipshet for 0001
http://blog.neten.de/read.php?66
???????????????????????????????
A little bit difficult for us to understand the link you posted. Is possible to update in english? Thank you in advance!
yes please if this is a way to cid unlock a G4, can someone please translate?
not really a solution
I read the entire post. It is NOT a CID unlock, basically the guy just ran aWizard and ignored the error of CID unlock error. The screen says CID unlock success, but it doesnt really unlock CID. rest explains what roms he used to update his O2 xda. Mostly are in Simplified Chinese ROM. Nothing special or new in that post. Search is still on.
Kensu, thanks for your time!
If you want to install a new ROM then there is no need to unlock CID. This procedure explains a method for updating all components except IPL/SPL on a Wizard. The same procedure and the same tools in the document can be used on a Prophet.
Pay attention to the warnings on the first page though. The procedure is not trivial so make sure you know what you are doing before you actually do it!
abubasim said:
If you want to install a new ROM then there is no need to unlock CID. This procedure explains a method for updating all components except IPL/SPL on a Wizard. The same procedure and the same tools in the document can be used on a Prophet.
Pay attention to the warnings on the first page though. The procedure is not trivial so make sure you know what you are doing before you actually do it!
Click to expand...
Click to collapse
Has someone already successfully tried this procedure on a prophet?
inshar said:
Has someone already successfully tried this procedure on a prophet?
Click to expand...
Click to collapse
Yep! Works well, as long as you try AKU2.x or better for the OS module. It didn't work with i-mate's old 1.2 ROM for JAMin but that just confirms what the article says. Everything else I've tried so far worked.
abubasim said:
Yep! Works well, as long as you try AKU2.x or better for the OS module. It didn't work with i-mate's old 1.2 ROM for JAMin but that just confirms what the article says. Everything else I've tried so far worked.
Click to expand...
Click to collapse
I can confirm!
I have used the procedure tonight and all worked perfectly!
Enough simple and with no unpgrading problems!
Now I have Italian rom on my device!
Thanks for help!
Prophet ( Qtek S200)
Hi inshar.
Have you tried with prophet with JAMin_ITA_2130921_21309111_020720_ship ROM ?
Do the settings remain the same as k-jam (ex. OS start address 80040000, HTC logo ?
Thank you
Merlino
Merlino said:
Hi inshar.
Have you tried with prophet with JAMin_ITA_2130921_21309111_020720_ship ROM ?
Do the settings remain the same as k-jam (ex. OS start address 80040000, HTC logo ?
Thank you
Merlino
Click to expand...
Click to collapse
Yes that rom and the configuration is the SAME of K-Jam (i had a 02 Mini S before thiefed :-(( )
Thanks
Great !
It works... Thank you so much
Merlino
Hello all,
i'm new here and i dont understand something :
following this tutorial can i install on my o2 neo an italian 2.13 rom instead of the english 2.15 i am currently using?
in other words can i "down"date my rom from 2.15 to 2.13?
another question: wich is the best italian rom so far?
i've managed to find only a 2.13 around,are there any newest italian rom around?
thanks
Probably I made something wrong, my device is DEAD!!! I have been severals hours to fix it but no way.
Now I can see the device in boot loader mode (3 colors)
IPL 1.00
SPL 2.15.0001
How can I recover the installation?
You have missmatch in IPL and SPL version.
Your IPL is corresponding to DOC G3, but SPL DOC G4.
This should not be the case. What was your original DOC?
Do you have USB connection when in rainbow screen?
rgds,
fdp24
No, I don't have a USB connection. Tonight I was thinking and I going to try to put the ROM stop at bootloader. Let me try it now. As soon as I have some news I'll post it. Thanks!
I just finish to download the Dopod 818 Pro Rom stop at bootloader fix but now the problem is getting biger, I mean, the battery is empty, so I can not charge the device with the USB or AC cable. I have to find a battery to try with this Rom. Or go to the technical support and try to fix it.
The screen is on and of by it self efvery couple minutes (just for a while)
Finally I got a charged battery from my brothyer and I started to download the mentioned rom, but at 80% stop, I get an error message.
ERROR 326 Invalid Command. This NBF file cannot be used for your PDA Phoen. Please check your NBF.
How could I do? Suggestions???
I made a call phone to the service mantenience and I have a date to try to fix it. I'm affraid they are going to tell me something I don't like to heard, but...
Now I'm going to start a new life without my Prophet for a few days, or at least, hope so.
Hello
I Do Upgrade for my JAMIN with PDAMobiz_Prophet_WM5AKU3.2_v3220 & it was Succeed With out any trouble
Than I Try to upgrade to 2006-11-12_Prophet_WM5AKU2.3_lvsw_edition but my Phone Stack So I reset as say after 30 m (about 48m)
The Baggiest Problem for me after reset my Jamin Stack in Booting (Just show Rom Version & Other) after that noting Happen..
I tray to format But also same. I tray to boot from USB & Install Original ROM I get This Error
ERROR [296] UPGRADE ONLY
This NBF file connects used for your PDA Phone. Please get newer NBF file.
Is there any way to erase ROM and Re Upgrade with Old ROM
I Tray to Upgrade with Latest Update PDAMobiz_Prophet_WM5AKU3.2_v3231
But fail because this Upgrade required synchronization with Pc ..
Until now I lost Every Thing My Phone is Similar to Dead
Please help me
Please change your topic title so it makes sense!
Second you should read before flashing your device... ...you havn't provide us with enough info, is your device CID unlocked? What SPL version do you have, do you have an G3 of G4 device?
Did you try to turn on your device and on the 3 color screen execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 again?
mccune said:
Please change your topic title so it makes sense!
Click to expand...
Click to collapse
Sorry for my title ...
mccune said:
Second you should read before flashing your device... ...you havn't provide us with enough info, is your device CID unlocked? What SPL version do you have, do you have an G3 of G4 device?
Click to expand...
Click to collapse
I Don't know about CID
My SPL 1.2
My Device G3
mccune said:
Did you try to turn on your device and on the 3 color screen execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 again?
Click to expand...
Click to collapse
I did it & connect to usb but when i execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 it's show me No Device Connect
Thanks for you
You had to CID unlock your phone first!
The only thing you can do I guess is install the NoVendorID Asia version for the Dopod.
You can't install the PDAMobiz ROM because there has to be an AS connection.
Try looking for: RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip on the XDA ftp.
Thanks
But Can you Tell me how to Unlock CID (What does mean CID?)
wa7eed said:
Thanks
But Can you Tell me how to Unlock CID (What does mean CID?)
Click to expand...
Click to collapse
You should try to flash your device with the ROM mentioned before.
After that you can try to CID Unlock your phone:
Wiki for Prophet
The CID part
You're lucky you didn't brick your device
First Thanks for all
MY STORY
I try to flash my device with ROM RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_S hip-NoVendorID.zip and I was very happy because it’s start to flash ROM but after rich 95% it’s stop and show me Error INVALED COMMAND ... I tray many times but all same
Even my device now when ever I turn ON it’s go to boot loader mode
Correction my SPL 2.20
Just today I notice I write it wrong 1.2
Waiting for your reply...
Again Thanks
Thanks for you mccune so match for Help & all staff in this great forum already I restore my Live (I mean My Device)
I have to update to this ROM RUU_Prophet_220734_2207114_024721_NVID.exe
Thanks again for all
Hi guys,
I've just implemented a Vox USPL which allows you to flash any Vox ROM updates, i.e. you can flash any *official* ROM even if your phone's model and vendor ID doesn't match. It's confirmed that you can also flash cooked ROMs
This SPL is based on original Vox 1.16 SPL but includes 3 patches:
1) g_cKeyCardSecurityLevel = 0 (set 32)
2) Does not check Model & Vendor ID
3) Does not check signature*
(*) code must be formally signed i.e. contain properly-formatted signatures on the right places, however no checking is performed against them.
This means you can flash ANY ROM to your Vox after running USPL on it, no need to pay for CID unlock anymore!
The USPL will *not* help you to SIM unlock your device. You still have to pay for that.
The USPL runs in RAM and is *not* flashed to your device, so there is no risk there. Once it runs you can run any official Vox ROM update utility.
The USPL does *not* permanently CID unlock your phone, like the CID unlocker from imei-check or so.
After you flashed a ROM your phone is again CID locked. Each time you wonna flash a ROM with a different model and/or vendor ID (different from your phone) or a cooked ROM, you must run the USPL again and then flash the ROM.
It's beta and untested and the risk is entirely yours !! Don't blame me if you brick your phone
EDIT:
You can now also flash the USPL allowing you to flash any unsigned (cooked ROM or ROM module, e.g. radio or OS) or signed ROM with any model/vendor ID. The USPL substitutes your SPL until you perform a full ROM update. Consider it as an extra insurance in case something goes wrong with flashing cooked ROMs or any other ROM update !
Instructions:
1. Run the USPL (Vox USPL- CID BYPASS.zip)
2. Run the ROMUpdateUtility.exe (Vox-USPL-RUU.zip)
Have fun,
JockyW
The attachments:
SDA_ApplicationUnlock.zip : application unlocker if u need it
mtty1.42.zip : terminal emulator (not neccessary if u only do ROM updates, but if you wonna play with the bootloader commands you need it)
Vox-USPL-RUU.zip: flash version of USPL (Note: you must first run USPL from "Vox USPL- CID BYPASS.zip" before you can flash it with ROMUpdateUtility.exe from Vox-USPL-RUU.zip !!!)
Vox USPL- CID BYPASS.zip : instructions included
Credits: in particular to pof. This USPL and also the one for Excalibur is based on his USPL for the Elf. See here
I think this is one of the most fantastic news of the century!!!
Finally some cooking can start on this little device.
Thanks again,
Ka.
noob question
what the difference between sim unlock and cid unlock?
This can be found in various threads around here, anyway.
SIM Lock - You can't use a SIM from a different provider than the one who sold you the phone.
CID-Lock - You can't flash your phone with a ROM which hasn't been cooked by your provider (or manufacturer for HTC unbranded phones).
Ka.
jockyw2001 great but make one for htc oxygen pls.
htc s710 - rom
confirm this is working very gd
thanks for all yoru help and support to this fourm
hi, i tried the method described and when it runs haret my vox shuts down... and nothing happens, i have to turn it on myself.
madds said:
hi, i tried the method described and when it runs haret my vox shuts down... and nothing happens, i have to turn it on myself.
Click to expand...
Click to collapse
Same here
anyone online right now wanna drop me a line about this... what do I do exactly with the ruu file. Do I place rom image in that folder while runnning update???
so i followed the instructions and executed the cid bypass(installed itsutils and haret). once i get to the end it says use mtty or flash with RUU. so I attempt to flash right after (am I supposed to flash while the screen is black) but its gives me a connections error. I figure its because the phone is off. So I turn it on and update with the RUU again but only make it to 3% before I get a invalid vendor id. Would anyone care to comment on how I can flash this vox to the dopod rom...
madds said:
hi, i tried the method described and when it runs haret my vox shuts down... and nothing happens, i have to turn it on myself.
Click to expand...
Click to collapse
acid74 said:
Same here
Click to expand...
Click to collapse
To the users who had the same problem as me I am currently flashing my phone and I managed to get past my problem by using the SDA Application unlocker on my vox. I always thought that HTC were already application unlocked. Was going crazy for a while but I guess I should've followed the instructions step-by-step regardless of what I thought.
Big up to jockyw2001(and of course pof for without him alot of us would still be using shipped rom) for this wicked tool.
Cheers
neptune said:
To the users who had the same problem as me I am currently flashing my phone and I managed to get past my problem by using the SDA Application unlocker on my vox. I always thought that HTC were already application unlocked. Was going crazy for a while but I guess I should've followed the instructions step-by-step regardless of what I thought.
Big up to jockyw2001(and of course pof for without him alot of us would still be using shipped rom) for this wicked tool.
Cheers
Click to expand...
Click to collapse
Thanx man,last night i figured it out too......hows the dopod ROM??
acid74 said:
Thanx man,last night i figured it out too......hows the dopod ROM??
Click to expand...
Click to collapse
I only got this phone so I could upgrade it for a friend to stop the boot loop. It seems to have fixed that problem so I guess it's better than the other roms. On the other hand I can't stand smartphone's so my suggestion is to ditch your SP and switch to PPC . Also I read before hand that this ROM doesn't include Windows Live Messenger but it is included in the rom. Just thought I'd let u guys know.
input please
Just ran into another problem and would appreciate some input. I understand that USPL only works for one flash...but I wasn't aware that a hard reset counted as a flash. Regardless my device hung at the dopod boot screen after a hard reset. Is this normal after using USPL on a device, and if so does this occur with all devices??? I would hate to give a phone back and have to tell the person that they can't perform a hard reset...
neptune said:
Just ran into another problem and would appreciate some input. I understand that USPL only works for one flash...but I wasn't aware that a hard reset counted as a flash. Regardless my device hung at the dopod boot screen after a hard reset. Is this normal after using USPL on a device, and if so does this occur with all devices??? I would hate to give a phone back and have to tell the person that they can't perform a hard reset...
Click to expand...
Click to collapse
If you flash a full ROM the SPL is overwritten with the one in the ROM (Dopod = 1.19). Nothing to do with USPL. Booting can take a long time after hard reset. Unplug battery and try again.
jockyw2001 said:
If you flash a full ROM the SPL is overwritten with the one in the ROM (Dopod = 1.19). Nothing to do with USPL. Booting can take a long time after hard reset. Unplug battery and try again.
Click to expand...
Click to collapse
Thanks, I got it to work eventually...Good to know USPL doesn't effect hard resets, I guess you learn something new everyday.
If I had to take a guess before hand I'd figure a SP would boot faster than a PPC, but I realize now that I'd be wrong...
thanks to all for the help, I can finally return this Vox back to its owner
cheers
Hi
I flashed my E650 in French with the swissrom (present on FTP), all works !
an idea to change the logo operator to HTC original ?
thanks
thought I fixed the problem. seems as if after a day it just hangs at the dopod screen. It was working fine everytime I had it. As soon as I give it back it seems to hang. Guess ima just flash it back to the HTC rom, too much hassle for just $20.
why SDA_ApplicationUnlock.zip can't unlock my Orange SPV E650?
Successful rom flash done on a spv e650 on a sim unlock device UK orange
hi guyz
am going to upgrade my XDA-Exec (Universal) G4 for the first time. its currently running WM5 from O2 but i am going to use it with another Service Provider.
now want to make sure of couple of things.
first... is there any HardSPL type of programe for Universal so that atleast i dont endup bricking the phone ?
second what exactly does the CID/EROM locks are for or SIM lock. I can use my other companies SIM in this phone so do i still need to do it ?
third how safe is the ROM updating without anything like HardSPL....?
reason why iam asking this is because its my friends phone and dont wanna brick it and second i have upgraded my HERM but have not done a Universal WM5 to 6 or 6.1 upgrade
Welcome.
No Their Is No HardSPL For Universal.
IMHO CID Unlocking Should Be Done As Various Bootloader Commands For Recovering The Device Will Only Work On A CID Unlocked Device. (I Think!)
Rom Upgrading Is Relatively Safe. Jus Make Sure The Battery Is Fully Charged.
Read The WIKI For More Information.
I Hope All Goes Smoothly For You.
P.S I Highly Reccomend Tomal's 8.0 Rom!
Regards,
OllieD
aaaa what is IMHO CID ? and how do i unlock it ?
Tis In The Wiki...
This Link Should Help You Out...
http://wiki.xda-developers.com/index.php?pagename=Uni_Simlock_by_Buzz_and_team
This Tool Is For Sim Unlocking The Device But Also Makes The Device SUPERCID (SUPERCID Unlocks All Bootloader Commands)
Regards,
OllieD
STUCKK .... Yikeeesss
guyz ..
i got the ROM updated last night and was using when i finally thought of using another ROM... while upgrading the other rom it just gave and error message on the PC and the phone was on the page where it ask you to press 0 for default ... so i did that and the phone restarted but now its stuck on the Splash Screen (the O2 operator starting screen) ...
if i connect the phone to the PC it will not recognize the phone as its totally stuck on the Splash screen ... if i try to goto the bootloader screen it gives me the same message of either Pressing X or 0 ... also the USB is not recognizing it ..
what to do .????
i got elfin and i want to ask if it is any way to flash rom in bootloader mode,i want just to got my htc working again and my device is stucked at bootloader showing in right top corner RUU and on left IPL And SPL numbers.
ms2405 said:
i got elfin and i want to ask if it is any way to flash rom in bootloader mode,i want just to got my htc working again and my device is stucked at bootloader showing in right top corner RUU and on left IPL And SPL numbers.
Click to expand...
Click to collapse
hey, i just took a brief look in the elfin section. Go there and look at the stickies, there are guides for un bricking yoiur elfin and a good guide on how to correctly hardspl and flash....DO READ THEM (and you normally should flash a rom from bootloader in any case )
If you dont want to hardspl, then try the uspl way. You didnt say what rom you had tried to flash or wot you have done to get it stuck in bootloader.
Also are you using vista or xp on your computer?
i'm using xp on my comp,i got to bootloader because i tried to flash some roms and when i tried last time flashing onyx one it showed me error message and then started the problem.
ok, did u hard-spl sucessfully? what is you ips/spl shown on bootloader?
IPL is 2.26.0002
SPL is 2.26.0000 and as i said in right top corner RUU,
i've tried to flash it from sd card,but it ain't worked andlooked at goldcard method and i haven't got another winmo devic and don't know somebody who has,please help me to unbrick my phone,it was both from orange uk.
ms2405 said:
IPL is 2.26.0002
SPL is 2.26.0000 and as i said in right top corner RUU,
i've tried to flash it from sd card,but it ain't worked andlooked at goldcard method and i haven't got another winmo devic and don't know somebody who has,please help me to unbrick my phone,it was both from orange uk.
Click to expand...
Click to collapse
Please have a look at post 3 from here : http://forum.xda-developers.com/showthread.php?t=408637
Is this what you have tried doing previously?
Did you unlock your elfin first if it is locked on orange network?
If you cant get it working after trying this, go back to first link above and flash back an original stock rom, at least ur device will be working again!!
ps when u hardspl and tried to flash, did u disable antivirus on PC, and disconnect all other non essential usb devices? This is an commen cause of bad flashes, also try other usb ports, 2 of mine i cant flash on, 2 i can (which is wierd) - (i have experienced this myself).
If any of this doesnt help, as for help in the elfin section, but DO describe all your steps properly and fully and enclose links of roms tried etc so someone with an elfin can see what you have donw and save unnecassary posts etc.
mate,the link you gave me is that when i upgraded my elfin when it was working, i don't know what you mean about unlocked it is sim unlocked what about cid i really don't have idea,because i couldn't connect to mtty,please can you give me the link for original stock rom for my elfin,because i haven't done backup and i downloaded one but i don't know how to put in when i got in bootloader only and can't connect acivesync please tell me how to this aswell,PLEASE HELP ME UNBRICK MY ELFIN!!
Have you resolved this?
Search and download a stock rom from HTC or from here, use the search and wiki, you will find one there.
When you plug in ur elfin into the computer and put it in bootloader, do you see "USB" on the screen along with ur ipl and spl?
You should, and if you do you should be able to flash the stock rom on.