Does any one know how to go around this? I have MDA Compact II and installed GERMAN ROM and now I'm Try to Image it to English ROM. But stuck on ERROR 294
Good if you could tell us what you have done (or trying to do)
E.g.
What are you using to install the English ROM
Where did you get your ROM from
When does the error message appear.
The more info the better.
Okay I have the MDA Compact II with a
ROM-Version: 2.6.2.28 GER
ROM-Datum: 3/9/06
Funkempfängerversion: 02.19.21
Protokoll-Version: 4.1.13.09
ExtROM-Version: 2.6.2.111
I want to install New Charmer Rom available 2.6.2 from UK to have it in Enlgish but when I tried to install I get an error invalid Vendor ID.
Need help.
I presume you are doing the ROM upgrade via the official ROM update facility.
Anyway, for you case, you may need to do it 'unofficially' using aWizard to flash a Charmer old English ROM (available in the FTP is someone didn't delete it) and update it to the new ROM using the official one.
Related
Hi,
I read somewhere in this forum the following procedure:
extract the Upgrade.exe file (use WinRAR)
edit the RUU.conf file
Add the following line
[CHECKCEID_TYPE]=1
Save changes
Now run BaUpgradeUt.exe
It will say that it will upgrade to this version.
However when the device enters bootloader mode the upgrade util gives a country error. (Don't panic)
Simply restart BaUpgradeUt.exe while the device is still in it's cradle.
Now it will install without a country error.
TESTED ON QTEK9090 AND IMATE JAM: ALWAYS WORKED !!!
:lol: :lol: :lol: :lol:
bye
Good suggestion, unfortunately it won't work with the 1.11 Finnish ROM.
xdua said:
Good suggestion, unfortunately it won't work with the 1.11 Finnish ROM.
Click to expand...
Click to collapse
Do you know how to flash a 1.11 Finisch rom? Or maybe someone else?
ok what i do to upgrade and works good for me..... i use this file MaUpgradeUt_noID.exe and then follow the steps which italos stated but without editing the RUU.conf file.... so use the mentioned file and follow these steps:
""extract the Upgrade.exe file (use WinRAR)
Now run MaUpgradeUt_noID.exe
It will say that it will upgrade to this version.
However when the device enters bootloader mode the upgrade util gives a country error. (Don't panic)
while it's in the bootloader mode (black screen with some writing in it" Serial v1. or whatever")
Simply run the MaUpgradeUt_noID.exe while the device is still in it's USB cable.
Now it will install without a country error."
and it works in the finnish ROM cuz my device is Imate Jam and i just flashed it this morning with the above steps........
best luck
where i find the file MaUpgradeUt_noID.exe
where can i download it
i look at the forum but can't find it plz help
this solution works with any version!!
the clue is that if the device information is erased, it cannot compare.
crusher said:
this solution works with any version!!
the clue is that if the device information is erased, it cannot compare.
Click to expand...
Click to collapse
thanks a lot :lol: , it worked fine for me, with the test french Rom 1.11
guyz ive got xdaII wm2003se.......want to upgrade to wm2005 getting country error code ?? any idea what should i do ?
thanks
jeetz....
not working in Qtek S100 any idea????
it works on S100 / jam / mda c
i tried several images with several devices!
good job!
crusher said:
this solution works with any version!!
the clue is that if the device information is erased, it cannot compare.
Click to expand...
Click to collapse
I have a hand-me-down Xda II mini, which according to the printing on the case was originally issued by O2, but which currently has the following Dutch Qtek ROM installed on it:
ROM version: 1.13.00 WWE
ROM date: 08/18/05
Radio version: 1.13.00
Protocol version: 1337.43
ExtROM version: 1.12.550 WWE
I'm trying to "upgrade" to the latest O2 ROM version:
ROM: 1.11.00 WWE
Radio: 1.11.00
ExtROM: 1.11.922 WWE
MMS: 2.0.0.22
I've followed the instructions from Italos to the letter (twice), but still keep getting the same Country ID error.
Any suggestions on why this is, and more importantly, on how to fix this?
Thanks,
Daniel
Lately I tried to upgrade my orange spv m500 to the newest rom upgrade available; One was made available by orange on the dutch site www.pocketpcclub.nl.
As I was installing the file the setup proces stopped while trying to upgrade the extended rom.
I tried and tried again, but to no afail. In my dispair i tried to upgrade with a spanish q-tek 1.11 rom. I ofcourse got the country code error and the wrong device id error......
I brought my spv m500 back to the shop; but the technicians couldnt replace the original extended rom.
So now im left with a spv without extended ROM.....
My device settings now are
Radio version: 1.12.00
Protocol version: 1337.42
Rom version: 1.12.00 WWE
ExtroM version: (empty field)
I still cant upgrade to the latest Extrom version............
Can anyone help me? Is it still possible to put back a working Ext rom?
Is it a UK M500?
Did you back the original rom up before upgrading?
Have you looked on the ftp site for the original m500 rom?
original Orange dutch Extended ROm version needed?
It's a NL rom(dutch) but I believe it has pretty much the same settings as the UK Version(few exceptions for GPRS settings I believe)
I havent found a original SPV M500 rom that comes with dutch settings.....So I would be very thankfull if somebody could upload such a version to the xda-ftp site.......
Hello,
In the upload directory is the new rom for the SPV M500 Dutch. It is the real Dutch version. After you flash your Magician it has all the settings voor Orange NL even the location is already pre selected.
It's a modified rom for the Imate- Jam, modified by Orange.
If you use the Maupgrade_NoID.exe it will falsh every magician I guess.
It works on my MDA Comapact (PM10A).
And in case that doesn't work, I have the Extended_ROM directory (Dutch) on my pc, so if you want I can send it to you.
(Though I don't think I'll be checking this forum too often, so send an email to draexin AT gmail DOT com)
Good luck ^_^
Hi
I have downloaded several radio rom from wiki and when I run the .exe file it shows my version is 1.2.0 image and it will upgrade to v2.47.21 etc. but when I go to my pda to check the rom version it's not 1.2.0, it's
Radio rom V02.19.21.
Protocol version 4.1.13.09
Ex Rom 2.15.13.121
Why does the program not show the correct rom version, will it damage my pda as I try to upgrade the rom when I had version
IPL 1.00
SPL 1.00.0000
GSM 01.13.20
OS 1.0.13.21
It's stop the battery from charging.
Also since the upgrade from 1 to v2 I get a blank screen when I reply to SMS, couldn't find my phone provider with auto config as the Dopod is from Singapore and I am using it in Hong Kong.
Thanks
The installer used for flashing the radio rom is "hacked". that's why it displays incorrect info. Just proceed witht he install and you should be fine.
I can't help you with your sms issues...
Hi there.
I wanted to update to the latest ENG rom on my S200, downloaded it of MyQtek, but when i tryed to upgrade, it said "Wrong Vendor ID". After a search i found that had to update first with Aku 2.2 NVID, done that.
Then i tryed again, and it said the same, then i took the nk.rom from the original package and replaced the same on NVID package, and it did the upgrade, but now i have:
IPL 2.10
SPL 2.20.000
GSM 02.47.21
ROM 2.20.7.34
Where is the upgrade ?!
Hi i tried to upgrade my Magician to Cotullas WM 6 rom, but it can't get it work. So I tried to upgrade to a Qtek S100 NL rom and i also tried a TMOB NL Rom ( Cause my GER O2 Rom won't work). I used the MaUpgradeUt_noID.exe for it but i still get the same error which i also had with Cotullas Rom.
Error 120: COUNTRY ID ERROR 23-23-36-36-36
Can someone help me?