Hi
I have downloaded several radio rom from wiki and when I run the .exe file it shows my version is 1.2.0 image and it will upgrade to v2.47.21 etc. but when I go to my pda to check the rom version it's not 1.2.0, it's
Radio rom V02.19.21.
Protocol version 4.1.13.09
Ex Rom 2.15.13.121
Why does the program not show the correct rom version, will it damage my pda as I try to upgrade the rom when I had version
IPL 1.00
SPL 1.00.0000
GSM 01.13.20
OS 1.0.13.21
It's stop the battery from charging.
Also since the upgrade from 1 to v2 I get a blank screen when I reply to SMS, couldn't find my phone provider with auto config as the Dopod is from Singapore and I am using it in Hong Kong.
Thanks
The installer used for flashing the radio rom is "hacked". that's why it displays incorrect info. Just proceed witht he install and you should be fine.
I can't help you with your sms issues...
Related
Hi,
I read somewhere in this forum the following procedure:
extract the Upgrade.exe file (use WinRAR)
edit the RUU.conf file
Add the following line
[CHECKCEID_TYPE]=1
Save changes
Now run BaUpgradeUt.exe
It will say that it will upgrade to this version.
However when the device enters bootloader mode the upgrade util gives a country error. (Don't panic)
Simply restart BaUpgradeUt.exe while the device is still in it's cradle.
Now it will install without a country error.
TESTED ON QTEK9090 AND IMATE JAM: ALWAYS WORKED !!!
:lol: :lol: :lol: :lol:
bye
Good suggestion, unfortunately it won't work with the 1.11 Finnish ROM.
xdua said:
Good suggestion, unfortunately it won't work with the 1.11 Finnish ROM.
Click to expand...
Click to collapse
Do you know how to flash a 1.11 Finisch rom? Or maybe someone else?
ok what i do to upgrade and works good for me..... i use this file MaUpgradeUt_noID.exe and then follow the steps which italos stated but without editing the RUU.conf file.... so use the mentioned file and follow these steps:
""extract the Upgrade.exe file (use WinRAR)
Now run MaUpgradeUt_noID.exe
It will say that it will upgrade to this version.
However when the device enters bootloader mode the upgrade util gives a country error. (Don't panic)
while it's in the bootloader mode (black screen with some writing in it" Serial v1. or whatever")
Simply run the MaUpgradeUt_noID.exe while the device is still in it's USB cable.
Now it will install without a country error."
and it works in the finnish ROM cuz my device is Imate Jam and i just flashed it this morning with the above steps........
best luck
where i find the file MaUpgradeUt_noID.exe
where can i download it
i look at the forum but can't find it plz help
this solution works with any version!!
the clue is that if the device information is erased, it cannot compare.
crusher said:
this solution works with any version!!
the clue is that if the device information is erased, it cannot compare.
Click to expand...
Click to collapse
thanks a lot :lol: , it worked fine for me, with the test french Rom 1.11
guyz ive got xdaII wm2003se.......want to upgrade to wm2005 getting country error code ?? any idea what should i do ?
thanks
jeetz....
not working in Qtek S100 any idea????
it works on S100 / jam / mda c
i tried several images with several devices!
good job!
crusher said:
this solution works with any version!!
the clue is that if the device information is erased, it cannot compare.
Click to expand...
Click to collapse
I have a hand-me-down Xda II mini, which according to the printing on the case was originally issued by O2, but which currently has the following Dutch Qtek ROM installed on it:
ROM version: 1.13.00 WWE
ROM date: 08/18/05
Radio version: 1.13.00
Protocol version: 1337.43
ExtROM version: 1.12.550 WWE
I'm trying to "upgrade" to the latest O2 ROM version:
ROM: 1.11.00 WWE
Radio: 1.11.00
ExtROM: 1.11.922 WWE
MMS: 2.0.0.22
I've followed the instructions from Italos to the letter (twice), but still keep getting the same Country ID error.
Any suggestions on why this is, and more importantly, on how to fix this?
Thanks,
Daniel
Is there a crossbow Rom only update for:
Cingular 8125 (Wizard 100) G3 chipset
IPL/SPL: 2.25
Rom Version 2.25.11.1
Radio 2.25.11
Also, Is it possible to update without a sim card in the Wizard? I have tried and have been reverting back to Cingulars ROM. Sticks at 100% then I get error 300.
Thanks
i have a prophet hanged on dopod, i updated the radio rom from 02.19.21 to 02.20.21, and SPL from 2.15.001 to 3.08.001, i have downloaded ,Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1.exe, can this file help me start my phone again or should i try some other version, my phone specifications are
IPL 2.15.001
SPL3.08.001
GSM02.20.21
OS 3.0.0.0.
PLEASE REPLY AS SOON AS POSSIBLE
hi, i have a g3 prophet with ipl ver. 1.00 and spl ver. 1.00.0000
i've just upgraded to pdaviet 4.0.0.4 PV and everything works flawlessly. however, due to wifi connections dropping i upgraded my phone's radio firmware from 1.13 to 2.19, the known version without bug with the pdaviet firmware.
installation is flawless but now my prophet can not boot , i just shows the dopod screen and resets continuosly. please help
i tried reupgrading with the newer radio version, but the installer said that it can not install, eventhough i have put my prophet in the three colour screen (bootloader) help me
You tried to restore old radio to phone , if not .
TOLD me ! i help u !
i dont have the old radio installer, it is 1.13 and can't find it anywhere.
also, i tried to upgrade to newer radioand reinstall rom, but the installer can not recognize my dopod, altough i have put it in the bootloader screen and connect it via usb.
it says error [300], invalid update tool. i have tried the 2.69 radio, 2.19 radio, and even the AKU 2.2 installer, and all of them return the same message.
please help
Hi there.
I wanted to update to the latest ENG rom on my S200, downloaded it of MyQtek, but when i tryed to upgrade, it said "Wrong Vendor ID". After a search i found that had to update first with Aku 2.2 NVID, done that.
Then i tryed again, and it said the same, then i took the nk.rom from the original package and replaced the same on NVID package, and it did the upgrade, but now i have:
IPL 2.10
SPL 2.20.000
GSM 02.47.21
ROM 2.20.7.34
Where is the upgrade ?!