Hi there.
I wanted to update to the latest ENG rom on my S200, downloaded it of MyQtek, but when i tryed to upgrade, it said "Wrong Vendor ID". After a search i found that had to update first with Aku 2.2 NVID, done that.
Then i tryed again, and it said the same, then i took the nk.rom from the original package and replaced the same on NVID package, and it did the upgrade, but now i have:
IPL 2.10
SPL 2.20.000
GSM 02.47.21
ROM 2.20.7.34
Where is the upgrade ?!
Related
hi all,
I installed 5._Underground_edition_Crossbow_ROM.exe
on qtek 9100 for tmobile.
Before installing this rom I installed custom_ruu_wizard_1050412....... bin and unlocked CID and phone.Now after successfully installed 5._Underground_edition_Crossbow_ROM.exe, I cannot make a call and I cannot sync with active sync v4.5. What should I do? How do I make activesync work sothat I can try another ROM? Whenever I try to goto phone or activesync setup it gives me error "a problem has occured with device.exe".
Please help me out.....
before update
IPL : 1.08
SPL : 1.08
OS : 1.8.10.2
after crowbow update
IPL : 1.01
SPL : 1.01.0000
OS : 10.1.6.811
my mistake was I didn't update my 9100 to 2.26 before updating to Crossbow.So looks like communication cab has been not installed.Is there any way my 9100 can communicate with Activesync?
thanks in advance.
u shd hv read the threads here and then updated it..to upgrade to wm6 underground edition u shd hv SPL greater than 2.xx..due to which GSM is not flashed as it has 2.47 version..u need to upgrade now to a rom which has SPL 2.xx and then do the underground edition
but how do I upgrade ? ,because when I connect usb cable to the phone nothing happend. i.e. activesync cannot start.
You should take time to read and search the forums. There are numerous posts with similar issues...
You need to get to the bootloader. Turn off your phone, then hold down the camera button while you turn it on, and you will be at the rainbow (bootloader) screen. Now you can flash.
Read the thread by Dr. P in the Wizard Upgrading forum. You have to follow every step exactly as it says (the last step is to upgrade to a 2.x official ROM).
thanks mfrazzz, you saved my $200, I installed 2.26 rom and then upgrade and now its working like a charm.
Thanks once again.
i have a prophet hanged on dopod, i updated the radio rom from 02.19.21 to 02.20.21, and SPL from 2.15.001 to 3.08.001, i have downloaded ,Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1.exe, can this file help me start my phone again or should i try some other version, my phone specifications are
IPL 2.15.001
SPL3.08.001
GSM02.20.21
OS 3.0.0.0.
PLEASE REPLY AS SOON AS POSSIBLE
hi, i have a g3 prophet with ipl ver. 1.00 and spl ver. 1.00.0000
i've just upgraded to pdaviet 4.0.0.4 PV and everything works flawlessly. however, due to wifi connections dropping i upgraded my phone's radio firmware from 1.13 to 2.19, the known version without bug with the pdaviet firmware.
installation is flawless but now my prophet can not boot , i just shows the dopod screen and resets continuosly. please help
i tried reupgrading with the newer radio version, but the installer said that it can not install, eventhough i have put my prophet in the three colour screen (bootloader) help me
You tried to restore old radio to phone , if not .
TOLD me ! i help u !
i dont have the old radio installer, it is 1.13 and can't find it anywhere.
also, i tried to upgrade to newer radioand reinstall rom, but the installer can not recognize my dopod, altough i have put it in the bootloader screen and connect it via usb.
it says error [300], invalid update tool. i have tried the 2.69 radio, 2.19 radio, and even the AKU 2.2 installer, and all of them return the same message.
please help
I downloaded the latest official radio ROM version for my prophet and ran the utility just as the wiki suggested, with the result that my radio ROM is totally gone and my device doesnt start... remains stuck at the club i-mate splash screen for a while and restarts, continuing over and over... my IPL is 1.00 and SPL is 1.00.000 with no GSM/radio version showing up
help please
Did you used the correct update RUU (for you it must be a G3 update RUU)?
I try to update my dopod to WM 6 using PDAVIET ROM
But now the device stuck at start up screen..
IPL 2.20
SPL 1. 00.0000
GSM 01.13.20
OS 2.20.7.34
Can anyone tell me what should I do
Thanx
re-flash your PDA with official WM 5 ROM and try antoher WM 6 ROM, you can find it here:
http://forum.xda-developers.com/showthread.php?t=310452
Just follow exact steps!!!
BTW, did you just connect your PDA to PC and start upgrade????