Database Info

GetDeviceData output from a S100 wanted

Dear fellows,
I am still at a dead point (my S100 is screwed and the OS is gone!)
I have seen several methods listed here to reflash the OS but most of them require the GetDeviceData output file to modify the original ROMs. Unfortunately I can't run anything on my PDA... It would be a great help if a kind S100 owner would run the GetDeviceData on his handset and post the output file for me. Do not worry, it doesn't hold any sensitive data. Just device model details. Any S100 device, any language... would suffice.
Thanks in advance for your help.
Silver.

...at least the Operator for QTEK...
C'mon guys... help me.

Here ya go...
Operator ID: DANGA001
Qtek S100 bought at Dangaard Norway.

Thanks...
...but it doesn't seem to work. Maybe an Italian PDA would be required.
I am afraid I have to send the PDA back to the service...

Maybe you can try the following:
- Set your Qtek in Bootloader mode
- Connect it to your pc
- Start the update program of the Qtek ROM 1.06
- The installer will not find any version of your current ROM because it is in bootloader mode, but it will allow to update it
- flashing...
- done
Hopefully it'll work for you.
And I will test it further, but this looks like the way to update the ROM without editing the ROM files...

The other alternative that worked for me:
I have a Dopod 818 ROM which I screwed up. I can't therefore read its country code with GetDeviceData.
I used the following to flash the i-mate ROM:
http://www.clubimate.com/Support/ma_cdlsku1_wwe_10300_143_10100_ship.exe
Then I upgraded with qtek 1.06 successfully.

Orange SPVm500 upgrade drama!

Lately I tried to upgrade my orange spv m500 to the newest rom upgrade available; One was made available by orange on the dutch site www.pocketpcclub.nl.
As I was installing the file the setup proces stopped while trying to upgrade the extended rom.
I tried and tried again, but to no afail. In my dispair i tried to upgrade with a spanish q-tek 1.11 rom. I ofcourse got the country code error and the wrong device id error......
I brought my spv m500 back to the shop; but the technicians couldnt replace the original extended rom.
So now im left with a spv without extended ROM.....
My device settings now are
Radio version: 1.12.00
Protocol version: 1337.42
Rom version: 1.12.00 WWE
ExtroM version: (empty field)
I still cant upgrade to the latest Extrom version............
Can anyone help me? Is it still possible to put back a working Ext rom?

Is it a UK M500?
Did you back the original rom up before upgrading?
Have you looked on the ftp site for the original m500 rom?

original Orange dutch Extended ROm version needed?
It's a NL rom(dutch) but I believe it has pretty much the same settings as the UK Version(few exceptions for GPRS settings I believe)
I havent found a original SPV M500 rom that comes with dutch settings.....So I would be very thankfull if somebody could upload such a version to the xda-ftp site.......

Hello,
In the upload directory is the new rom for the SPV M500 Dutch. It is the real Dutch version. After you flash your Magician it has all the settings voor Orange NL even the location is already pre selected.
It's a modified rom for the Imate- Jam, modified by Orange.
If you use the Maupgrade_NoID.exe it will falsh every magician I guess.
It works on my MDA Comapact (PM10A).

And in case that doesn't work, I have the Extended_ROM directory (Dutch) on my pc, so if you want I can send it to you.
(Though I don't think I'll be checking this forum too often, so send an email to draexin AT gmail DOT com)
Good luck ^_^

fragged my mda_c with official update

Hi all,
yesterday, i thought it's a nice day to do the official german t-mobile 1.12 upgrade on my official german t-mobile mdac. It wasn't.
After the upgrade (no errors) the bootscreen shows:
no gsm, and only one Version number: 1.12.01 Ger
on the bottom line.
After it bootet, i get no gsm and no bluetooth working. When i connect by usb, active sync hangs for about 3-5 minutes. If i try to repeat the upgrade, i get something like wrong device, and it shows empty fields on the version screen. I tried to do the update by extracting the official update rar and start the update by MaUpgradeUT_noID.exe, but it says something like wrong device.
I tried this to the same with the 1.13 upgrade from the xda ftp, same thing. I tried a rombackup from sd-card that i found somewhere on the net, but the bootloader says wrong section=1 not allowed.
Is there anybody wo could help me to resurrect my poor little mdac?
Thanks alot,
J

Hi J.
Don't know how to solve all your problems with upgrading, but did you copy the first bytes of your own romdump to the downloaded rom? Otherwise your device won't accept it, you can find a lott about this in other threads. try searching for BigStorage and you will everything about rom upgrades.
Good luck, M

Upgrade your device with the imate rom 1.12 wwe using MaUpgradeUt_noID.exe ,it should work ,then try to upgrade to the german rom upgrade.
Good luck

ongoing revival
Ok, i tried that big storage thing, i replaced the id in the new image from my backup (broken) rom, and when trying to upgrade from sd-card, i get Section = 1 not allowed update.
I'm trying to upgrade the radio stack from the bootloader screen with MaUpgradeUT.exe, but it seems that the usb port doesn't work: for 10 minutes, the update screen stands at 0%, then an error appears:
Radio Rom Update Error.. i should reset, reconnect and retry.
Any more ideas? Is there a possiblity to do the normal "online" update (not via bootlaoder/backup-image) just from sdcard?
Please Help

J,
Last night I did a BigStorage in a very easy way. I followed the description in the thread about upgrading to radio 1.13. You'll have to unzip the shipped rom, decode nk.nbf it with dnbf. Then you replace the usual bit pattern and encode nk.nb1 again. After that you can use maupgrade with or without the noid function like a regular apgrade.
Hope it helps you, M

2.03 TX WWE to Win Mobile 6.1

I want to upgrade my good old Magician from ROM 2.03 TX WWE to the new Windows Mobile 6.1. But it doesn´t work. Tried also to downgrade to 1.13 ROM (with no extended ROM) but had no success. Has anybody any idea what can i do to get 6.1 to work on the Magician? That would be great !!!
Thanks for your interest and i hope someone has a solution for me!
greetings from Germany
Hubie53

I have the same Problem. But it's not just that I can't upgrade to 6.1... I can't do anything. I tried to get different Roms on my Magician. The original Rom too...but nothing works. All that since I tried the 2.03TX Rom... The 2.03TX is working nice at the moment but I would prefer the original one or WM6.1 Please help!!!

I had no problem switching between tx and 6.1 - both directions.
The only thing I had to be aware of is the radio version. 2.03tx doesn't install it's own radio and last cotulla rom requires radio 1.12.

my O2 mini can't upgrade any WM6.1 ROM. It's 64MB RAM and 64MB flash.

phamhien said:
my O2 mini can't upgrade any WM6.1 ROM. It's 64MB RAM and 64MB flash.
Click to expand...
Click to collapse
Check following 3 points:
1. Make sure your device is a "Magician"
2. Make sure the downloaded ROM is one of Cotullas WM6.1 (O1 , O2 or O3)
3. Befor flashing make sure the Radio on the Magician is version 1.12

Yes, it is a Magician, the ROM is Cotulla´s 6.1 Beta 7 (03), and my Radio is 1.12. But my PC says no USB! A problem with Vista, perhaps?

Flashing the Magician on a Vista PC does not work, this is a very old stuff.
Use a PC with XP-Pro and everything will be fine.

targets said:
Flashing the Magician on a Vista PC does not work, this is a very old stuff.
Use a PC with XP-Pro and everything will be fine.
Click to expand...
Click to collapse
I have xp, and many problems with connect magican to the pc in bootloader.
maybe i can change bootloader or reload it? where i can get some bootloader to the magican?
sory for my english (im from polish)

kamillo-s said:
I have xp, and many problems with connect magican to the pc in bootloader.
maybe i can change bootloader or reload it? where i can get some bootloader to the magican?
sory for my english (im from polish)
Click to expand...
Click to collapse
Maybe you have a problem with your PC, maybe you are doing wrong, or maybe your Magician is corrupted.
I don't know much about the bootloader, guess it is on his own chip and not changeable at this time, otherwhise it could be a part of the rom but i have never seen a Magician bootloader-file for itselfs.

hubie53 said:
Yes, it is a Magician, the ROM is Cotulla´s 6.1 Beta 7 (03), and my Radio is 1.12. But my PC says no USB! A problem with Vista, perhaps?
Click to expand...
Click to collapse
try to change the usb port to another....
or make sure u have the newest activesync...

Thanks for your help! i 've upgrade succesed for my magican!

I try update on other magican, and was succesfuly. I think I cant update rom after instaling 2.03 tx that something was broken or its something wrong witch magicans software. I have this same model of magican ,and other rom, and I can flash it.

same same here
i had the same problem with my magician i think it happens with some devices not all of them i couldn't find any way yet to solve it.

WM 6.1 for Magician-a fake?
Managed to flash my device with Windows XP. Works fine, thanks to all helpers!!!

dead.....!!!!
wiuh,my services i-mate jam dead after upgrading.
i got in bootloader mode n upgrade radio rom to 1.12 use this rom NL_11300_131_11200.exe.
i deleted nk.nbf, and ms_.nbf, so just radio.nbf
upgrade success!
then i try to upgrade with the same rom(NL_11300_131_11200.exe) without radio.nbf. fail it say error id country.ok then i try the other rom.
JAM_WWE_11200_128_11210_ship.exe
i deleted just radio.nbf,because i just want to upgrade the rom.
at ext rom upgrade it success.but when maybe about 30% uprade rom,it fail. and say error.i forgot the error.
and my i-mate dead. :'(
if i put usb cable n open the back case(baterai still in side or not) the lamp red is on.
but when i closed the back case.it turned off.
nothing happen,no indicated the pda was still connected.activesync has no sound.usb on device manager didnt indicated there was a pda connection.
so??
what must i do now?
??? this is not mine.if mine i dont care too much,but this my costumers!
anyone can help pls!
i beg u.pls!

learnig said:
wiuh,my services i-mate jam dead after upgrading.
i got in bootloader mode n upgrade radio rom to 1.12 use this rom NL_11300_131_11200.exe.
i deleted nk.nbf, and ms_.nbf, so just radio.nbf
upgrade success!
then i try to upgrade with the same rom(NL_11300_131_11200.exe) without radio.nbf. fail it say error id country.ok then i try the other rom.
JAM_WWE_11200_128_11210_ship.exe
i deleted just radio.nbf,because i just want to upgrade the rom.
at ext rom upgrade it success.but when maybe about 30% uprade rom,it fail. and say error.i forgot the error.
and my i-mate dead. :'(
if i put usb cable n open the back case(baterai still in side or not) the lamp red is on.
but when i closed the back case.it turned off.
nothing happen,no indicated the pda was still connected.activesync has no sound.usb on device manager didnt indicated there was a pda connection.
so??
what must i do now?
??? this is not mine.if mine i dont care too much,but this my costumers!
anyone can help pls!
i beg u.pls!
Click to expand...
Click to collapse
thx the problem was solved.thx

hubie53 said:
I want to upgrade my good old Magician from ROM 2.03 TX WWE to the new Windows Mobile 6.1. But it doesn´t work. Tried also to downgrade to 1.13 ROM (with no extended ROM) but had no success. Has anybody any idea what can i do to get 6.1 to work on the Magician? That would be great !!!
Thanks for your interest and i hope someone has a solution for me!
greetings from Germany
Hubie53
Click to expand...
Click to collapse
i Have flash my jam with 2.03 TX WWE and then downgrade to original i mat jam
after a month i flashed it again and can't downgrade or upgrade or do anything for 1 1/2 year
i tray many things like sd flash and many roms but it didn't work
may be Mr.Cotulla have a solution for it or any one have it share it to us
the only thing we can made is to inter the boot loader mode
Thanks

Qtek s100 upgrade fails

Hello,
I was in WM 2003 in my Qtek s100 (radio 1.11.0) then i changed rom to cotulla 3.06 WWE (last version), it's works but now i want to have original rom, the english or the french one, i downloaded from trusted site, like Shipped-rom, etc...but everytime i flash it tells me that there is a problem.
The english one tells me "Country ID ERROR" the french one tells me the same, and the other french one tells me General Error, and it does not work when i use MaUpgradeUt_noID.exe, i really need to flash to the last original version of my Qtek s100 !!
Please help me !
Windows xp SP3 (32 bits) with ActiveSync installed, tried with disabled too.
Thankx

No one for help ?
Okey...thankx any way.

Darkmdex said:
Hello,
I was in WM 2003 in my Qtek s100 (radio 1.11.0) then i changed rom to cotulla 3.06 WWE (last version), it's works but now i want to have original rom, the english or the french one, i downloaded from trusted site, like Shipped-rom, etc...but everytime i flash it tells me that there is a problem.
The english one tells me "Country ID ERROR" the french one tells me the same, and the other french one tells me General Error, and it does not work when i use MaUpgradeUt_noID.exe, i really need to flash to the last original version of my Qtek s100 !!
Please help me !
Windows xp SP3 (32 bits) with ActiveSync installed, tried with disabled too.
Thankx
Click to expand...
Click to collapse
have you put the device into bootloader mode and use the MaUpgradeUt_noID.exe?

d-two said:
have you put the device into bootloader mode and use the MaUpgradeUt_noID.exe?
Click to expand...
Click to collapse
Yes i did ! it says upgrade from (nothing, it's blank) to (nothing, it's blank) then it says succesfull but when i boot the phone it's the same !
Do you have a solution please ?
Thankx