Dear fellows,
I am still at a dead point (my S100 is screwed and the OS is gone!)
I have seen several methods listed here to reflash the OS but most of them require the GetDeviceData output file to modify the original ROMs. Unfortunately I can't run anything on my PDA... It would be a great help if a kind S100 owner would run the GetDeviceData on his handset and post the output file for me. Do not worry, it doesn't hold any sensitive data. Just device model details. Any S100 device, any language... would suffice.
Thanks in advance for your help.
Silver.
...at least the Operator for QTEK...
C'mon guys... help me.
Here ya go...
Operator ID: DANGA001
Qtek S100 bought at Dangaard Norway.
Thanks...
...but it doesn't seem to work. Maybe an Italian PDA would be required.
I am afraid I have to send the PDA back to the service...
Maybe you can try the following:
- Set your Qtek in Bootloader mode
- Connect it to your pc
- Start the update program of the Qtek ROM 1.06
- The installer will not find any version of your current ROM because it is in bootloader mode, but it will allow to update it
- flashing...
- done
Hopefully it'll work for you.
And I will test it further, but this looks like the way to update the ROM without editing the ROM files...
The other alternative that worked for me:
I have a Dopod 818 ROM which I screwed up. I can't therefore read its country code with GetDeviceData.
I used the following to flash the i-mate ROM:
http://www.clubimate.com/Support/ma_cdlsku1_wwe_10300_143_10100_ship.exe
Then I upgraded with qtek 1.06 successfully.
Related
I was in the middle of a rom upgrade with my magician and the battery has died now after trying to reupgrade with the original imate rom, it gives me a country code error. When I use get device data and view the devicedata.txt file all I get is 2 little squares where there was the operator ID. How can I reinstall the original rom from Imate and have it overwrite the operator ID on the device so I will except the upgrade. I have tried this via SD and with the original upgrade but with no luck. Help is really need please. I know this can be done I just aint sure how to go about doing it. It happen to be with my Qtek 2020 when upgrading to the 2.20 CHS version it changed from Qtek to o2.
Hi,
I read somewhere in this forum the following procedure:
extract the Upgrade.exe file (use WinRAR)
edit the RUU.conf file
Add the following line
[CHECKCEID_TYPE]=1
Save changes
Now run BaUpgradeUt.exe
It will say that it will upgrade to this version.
However when the device enters bootloader mode the upgrade util gives a country error. (Don't panic)
Simply restart BaUpgradeUt.exe while the device is still in it's cradle.
Now it will install without a country error.
TESTED ON QTEK9090 AND IMATE JAM: ALWAYS WORKED !!!
:lol: :lol: :lol: :lol:
bye
Good suggestion, unfortunately it won't work with the 1.11 Finnish ROM.
xdua said:
Good suggestion, unfortunately it won't work with the 1.11 Finnish ROM.
Click to expand...
Click to collapse
Do you know how to flash a 1.11 Finisch rom? Or maybe someone else?
ok what i do to upgrade and works good for me..... i use this file MaUpgradeUt_noID.exe and then follow the steps which italos stated but without editing the RUU.conf file.... so use the mentioned file and follow these steps:
""extract the Upgrade.exe file (use WinRAR)
Now run MaUpgradeUt_noID.exe
It will say that it will upgrade to this version.
However when the device enters bootloader mode the upgrade util gives a country error. (Don't panic)
while it's in the bootloader mode (black screen with some writing in it" Serial v1. or whatever")
Simply run the MaUpgradeUt_noID.exe while the device is still in it's USB cable.
Now it will install without a country error."
and it works in the finnish ROM cuz my device is Imate Jam and i just flashed it this morning with the above steps........
best luck
where i find the file MaUpgradeUt_noID.exe
where can i download it
i look at the forum but can't find it plz help
this solution works with any version!!
the clue is that if the device information is erased, it cannot compare.
crusher said:
this solution works with any version!!
the clue is that if the device information is erased, it cannot compare.
Click to expand...
Click to collapse
thanks a lot :lol: , it worked fine for me, with the test french Rom 1.11
guyz ive got xdaII wm2003se.......want to upgrade to wm2005 getting country error code ?? any idea what should i do ?
thanks
jeetz....
not working in Qtek S100 any idea????
it works on S100 / jam / mda c
i tried several images with several devices!
good job!
crusher said:
this solution works with any version!!
the clue is that if the device information is erased, it cannot compare.
Click to expand...
Click to collapse
I have a hand-me-down Xda II mini, which according to the printing on the case was originally issued by O2, but which currently has the following Dutch Qtek ROM installed on it:
ROM version: 1.13.00 WWE
ROM date: 08/18/05
Radio version: 1.13.00
Protocol version: 1337.43
ExtROM version: 1.12.550 WWE
I'm trying to "upgrade" to the latest O2 ROM version:
ROM: 1.11.00 WWE
Radio: 1.11.00
ExtROM: 1.11.922 WWE
MMS: 2.0.0.22
I've followed the instructions from Italos to the letter (twice), but still keep getting the same Country ID error.
Any suggestions on why this is, and more importantly, on how to fix this?
Thanks,
Daniel
Hey guys,
I tried the WWE-ROM with BigStorage now, but I just want to go back to the original TMO Germany ROM, cuz I don't have big advantages of it but I lose my warranty...
Now my Problem:
Upgrading to WWE was just easy as described in the Procedure.doc on the ftp. But what do I have to do to get the original ROM back?
I saved it as a German.nb1. D I have to use ntrw write German.nb1 h: ? (h: is my sd-card-slot)
That way it doesnt work, the Bootloader doesnt even recognize the ROM. When I backup my WWE-ROM to the SD-card and the use that ntrw command from above, the ROM is recognized, but after having updated it, I can't bot anymore.
Hope anybody can help
greetz Stefan
Shipped rom?
Hi Stefan,
Seems like there's something wrong with your original rom-dump. Had it myself & it's a pain in the ***. Why not download the original German TMO shipped-rom & try it with the normal usb upgrade method?
Since your magician won't boot the software will probably tell you're upgrading from version blank, but that's no problem it will work. just put it into bootloader, connect usb & start the update program.
Success, M
seems to work, I'm just upgrading it, just had to put it in bootloader-mode again and start the update-utility from t-mobile.de...
will report if it really worked later on
Hi! you would do me a great favour by putting the rom on the ftp! i would really need it!
Please!
are you from germany or from austria?
greets
I don't need to upload it, its not even the most recent version (my original ROM was never, but I didn't find the original from TMO in a newer version :-( )
Just download it from t-mobile.de, I'm from Germany anyway...
greetz Stefan
The story: Received an new O2 XDA NEO from Germany. Being portuguese I don't know nothing of german idiom. I dowloded the JAMIN Eng. rom from the FTP and tryed to unstall this rom. With the ROMUpadte utility that comes with the ROM I get an error. With the ROM Update Utility_NOID the process stars and go normally until 95%. Here, after some minutes give me an error saying I can't upagrade with the NBF file.
I was a little passed out thinking that instead a phone I had a brick. Pul out the batery for moments. After I turned on the phone and it shows the tri color scren of bootloader. Ok conect the usb cable again and start the upgrade to the RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID. and voila... the process completed without problems.
The weird thing is why my phone doesn't accept the JAMIN rom?
Anyone has an expplanation for that? Thank you
can you tell me wehere i can download a jamin rom ? then i can test it with my o2 xda neo
I upgraded my Neo to jamin rom without a problem. I was using the RomUpdateUtility by machinagod, which you can find in this forum. But now I have switched to RUU_2151327..._DOP_ASIA_WWE too. To me, the new version DOP_ASIA_WWE rom works much better than that jamin. More fast, more effective. The JAMIN always runs out memories and makes the CE-Star chinese input inactive, especially when WiFi used. The DOP_ASIA rom rarely meets such problem.
Upgrade rom
You can only upgrade rom but can not downgrade. So now you are at 2.15
but Jamin is at 2.13.
Hi,
upgraded qtek s200 with RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe, using ROMUpdateUtility-NoVendorID.zip, which does not check Vendor ID.
No major issues so far. During boot dispays Dopod instead of QTEK .
Besides, few differences I found in voice diler and new program called AutoConfig. Appears, to configure automatic settings for your GSM carrier, but only for ASIAN operators, which is useless to me. No worries, interface still English.
It was mentioned few times in this forum, that you may experience some "delays" during flashing your device - don't panic, don't touch it, just wait for some time, it will finish on its own.
Good luck with upgrades.
de yl1wc
I own a SPV C600 (Dutch). Because of the tight security of the latest Dutch ROM for the C600 I flashed it with the latest QTek 8310.
Now I've tried the latest Cingular ROM for the 2125.
Because the Cingular ROM only supports the English language I want to change it back to the QTek ROM again.
But no matter what I do it keeps saying :
---
ERROR [296] : UPGRADE ONLY
This NBF file cannot be used for your Smartphone. Please get newer NBF file.
---
I did raise the number on the image version, removed the Operator field. Also tried to make al the fields exactly like it shows on the "update screen" before flashing.
Anybody able to help me out here?
Common, where are al those smart people
Posted this als on SPV-Developers, seems like I'm the only one with this problem Now I'm stuck with an English C600
i had a similar problem with an englsh c600 spent ages sorting it, what i did is sent the header with a matching operator id. then i changed every number up by one in both version numbers. this didnt work but then when i only changed the second digit in the first version number by one again the rom loaded.
ie
11.1.1.5 > 12.2.2.6 > 12.3.2.6
i suggest just persist with it. otherwise use spv services to unlock your cid then you can load what you want on your phone.
Thanks for your reply!
I'm using the latest Qtek 8300 ROM now. I don't know if it's the best. But at least it's unlocked