Database Info

Rom upgrade problems, HELP Please.

I was in the middle of a rom upgrade with my magician and the battery has died now after trying to reupgrade with the original imate rom, it gives me a country code error. When I use get device data and view the devicedata.txt file all I get is 2 little squares where there was the operator ID. How can I reinstall the original rom from Imate and have it overwrite the operator ID on the device so I will except the upgrade. I have tried this via SD and with the original upgrade but with no luck. Help is really need please. I know this can be done I just aint sure how to go about doing it. It happen to be with my Qtek 2020 when upgrading to the 2.20 CHS version it changed from Qtek to o2.

GetDeviceData output from a S100 wanted

Dear fellows,
I am still at a dead point (my S100 is screwed and the OS is gone!)
I have seen several methods listed here to reflash the OS but most of them require the GetDeviceData output file to modify the original ROMs. Unfortunately I can't run anything on my PDA... It would be a great help if a kind S100 owner would run the GetDeviceData on his handset and post the output file for me. Do not worry, it doesn't hold any sensitive data. Just device model details. Any S100 device, any language... would suffice.
Thanks in advance for your help.
Silver.

...at least the Operator for QTEK...
C'mon guys... help me.

Here ya go...
Operator ID: DANGA001
Qtek S100 bought at Dangaard Norway.

Thanks...
...but it doesn't seem to work. Maybe an Italian PDA would be required.
I am afraid I have to send the PDA back to the service...

Maybe you can try the following:
- Set your Qtek in Bootloader mode
- Connect it to your pc
- Start the update program of the Qtek ROM 1.06
- The installer will not find any version of your current ROM because it is in bootloader mode, but it will allow to update it
- flashing...
- done
Hopefully it'll work for you.
And I will test it further, but this looks like the way to update the ROM without editing the ROM files...

The other alternative that worked for me:
I have a Dopod 818 ROM which I screwed up. I can't therefore read its country code with GetDeviceData.
I used the following to flash the i-mate ROM:
http://www.clubimate.com/Support/ma_cdlsku1_wwe_10300_143_10100_ship.exe
Then I upgraded with qtek 1.06 successfully.

Need help how to reflashing my MDAc from WWE to GER.*thx*

I bough my MDAc some days ago and the first I read was the bad accoustic ... but some Google searches told me that there´ll be a firmware update from T-Mobile with the Cebit2005 also having a link for the download section. Cause there was nothing to download I decided to use the firmware beeing offered here. I did the following:
1.) Downloading a actual MDAc firmware (WWE version)
2.) Downloading the country-free hacked MaUpgradeUt.exe
3.) Flashing the device
Everything worked fine but cause my device had an english (WWE) menu I decided to find out how to solv this language problem and found the thread "How to upgrade with the latest I-mate Jam ROM --GUIDE--" (http://forum.xda-developers.com/viewtopic.php?t=14973). I understood the process but I still wasn´t able to upgrade cause of the following reason:
1.) I downloaded the new firmeware as WWE version
2.) I went through the hacking process
3.) I tried to flash the MDAc with this firmware
RESULT: The "MaUpgradeUt.exe" told me that the firmware isn´t made for my device (country error)
So I decided to use the hacked MaUpgradeUt.exe which worked but brought me anohter problem. When I startet this file it analysed my device and (normally!) listed me the actual and the new firmware version ... but these fields left empty. When I proceeded the next window told me that I successfully flashed my device ... but the device never received any data during this one second from on to the final window.
So ... flashing with the original MaUpgradeUt.exe is impossible while trying to change the language from WWE to GER ... and the hacked MaUpgradeUt.exe has a problem flashing the device.
Does anyone has an idea how to solve this mess and/or another idea how to change the language later and/or is there a application which offers this (i.e. any mobile phone does it)?

Orange SPVm500 upgrade drama!

Lately I tried to upgrade my orange spv m500 to the newest rom upgrade available; One was made available by orange on the dutch site www.pocketpcclub.nl.
As I was installing the file the setup proces stopped while trying to upgrade the extended rom.
I tried and tried again, but to no afail. In my dispair i tried to upgrade with a spanish q-tek 1.11 rom. I ofcourse got the country code error and the wrong device id error......
I brought my spv m500 back to the shop; but the technicians couldnt replace the original extended rom.
So now im left with a spv without extended ROM.....
My device settings now are
Radio version: 1.12.00
Protocol version: 1337.42
Rom version: 1.12.00 WWE
ExtroM version: (empty field)
I still cant upgrade to the latest Extrom version............
Can anyone help me? Is it still possible to put back a working Ext rom?

Is it a UK M500?
Did you back the original rom up before upgrading?
Have you looked on the ftp site for the original m500 rom?

original Orange dutch Extended ROm version needed?
It's a NL rom(dutch) but I believe it has pretty much the same settings as the UK Version(few exceptions for GPRS settings I believe)
I havent found a original SPV M500 rom that comes with dutch settings.....So I would be very thankfull if somebody could upload such a version to the xda-ftp site.......

Hello,
In the upload directory is the new rom for the SPV M500 Dutch. It is the real Dutch version. After you flash your Magician it has all the settings voor Orange NL even the location is already pre selected.
It's a modified rom for the Imate- Jam, modified by Orange.
If you use the Maupgrade_NoID.exe it will falsh every magician I guess.
It works on my MDA Comapact (PM10A).

And in case that doesn't work, I have the Extended_ROM directory (Dutch) on my pc, so if you want I can send it to you.
(Though I don't think I'll be checking this forum too often, so send an email to draexin AT gmail DOT com)
Good luck ^_^

Qtek s100 upgrade fails

Hello,
I was in WM 2003 in my Qtek s100 (radio 1.11.0) then i changed rom to cotulla 3.06 WWE (last version), it's works but now i want to have original rom, the english or the french one, i downloaded from trusted site, like Shipped-rom, etc...but everytime i flash it tells me that there is a problem.
The english one tells me "Country ID ERROR" the french one tells me the same, and the other french one tells me General Error, and it does not work when i use MaUpgradeUt_noID.exe, i really need to flash to the last original version of my Qtek s100 !!
Please help me !
Windows xp SP3 (32 bits) with ActiveSync installed, tried with disabled too.
Thankx

No one for help ?
Okey...thankx any way.

Darkmdex said:
Hello,
I was in WM 2003 in my Qtek s100 (radio 1.11.0) then i changed rom to cotulla 3.06 WWE (last version), it's works but now i want to have original rom, the english or the french one, i downloaded from trusted site, like Shipped-rom, etc...but everytime i flash it tells me that there is a problem.
The english one tells me "Country ID ERROR" the french one tells me the same, and the other french one tells me General Error, and it does not work when i use MaUpgradeUt_noID.exe, i really need to flash to the last original version of my Qtek s100 !!
Please help me !
Windows xp SP3 (32 bits) with ActiveSync installed, tried with disabled too.
Thankx
Click to expand...
Click to collapse
have you put the device into bootloader mode and use the MaUpgradeUt_noID.exe?

d-two said:
have you put the device into bootloader mode and use the MaUpgradeUt_noID.exe?
Click to expand...
Click to collapse
Yes i did ! it says upgrade from (nothing, it's blank) to (nothing, it's blank) then it says succesfull but when i boot the phone it's the same !
Do you have a solution please ?
Thankx