Hi i tried to upgrade my Magician to Cotullas WM 6 rom, but it can't get it work. So I tried to upgrade to a Qtek S100 NL rom and i also tried a TMOB NL Rom ( Cause my GER O2 Rom won't work). I used the MaUpgradeUt_noID.exe for it but i still get the same error which i also had with Cotullas Rom.
Error 120: COUNTRY ID ERROR 23-23-36-36-36
Can someone help me?
Related
I was in the middle of a rom upgrade with my magician and the battery has died now after trying to reupgrade with the original imate rom, it gives me a country code error. When I use get device data and view the devicedata.txt file all I get is 2 little squares where there was the operator ID. How can I reinstall the original rom from Imate and have it overwrite the operator ID on the device so I will except the upgrade. I have tried this via SD and with the original upgrade but with no luck. Help is really need please. I know this can be done I just aint sure how to go about doing it. It happen to be with my Qtek 2020 when upgrading to the 2.20 CHS version it changed from Qtek to o2.
Lately I tried to upgrade my orange spv m500 to the newest rom upgrade available; One was made available by orange on the dutch site www.pocketpcclub.nl.
As I was installing the file the setup proces stopped while trying to upgrade the extended rom.
I tried and tried again, but to no afail. In my dispair i tried to upgrade with a spanish q-tek 1.11 rom. I ofcourse got the country code error and the wrong device id error......
I brought my spv m500 back to the shop; but the technicians couldnt replace the original extended rom.
So now im left with a spv without extended ROM.....
My device settings now are
Radio version: 1.12.00
Protocol version: 1337.42
Rom version: 1.12.00 WWE
ExtroM version: (empty field)
I still cant upgrade to the latest Extrom version............
Can anyone help me? Is it still possible to put back a working Ext rom?
Is it a UK M500?
Did you back the original rom up before upgrading?
Have you looked on the ftp site for the original m500 rom?
original Orange dutch Extended ROm version needed?
It's a NL rom(dutch) but I believe it has pretty much the same settings as the UK Version(few exceptions for GPRS settings I believe)
I havent found a original SPV M500 rom that comes with dutch settings.....So I would be very thankfull if somebody could upload such a version to the xda-ftp site.......
Hello,
In the upload directory is the new rom for the SPV M500 Dutch. It is the real Dutch version. After you flash your Magician it has all the settings voor Orange NL even the location is already pre selected.
It's a modified rom for the Imate- Jam, modified by Orange.
If you use the Maupgrade_NoID.exe it will falsh every magician I guess.
It works on my MDA Comapact (PM10A).
And in case that doesn't work, I have the Extended_ROM directory (Dutch) on my pc, so if you want I can send it to you.
(Though I don't think I'll be checking this forum too often, so send an email to draexin AT gmail DOT com)
Good luck ^_^
it's possible to put imate sp5 rom on qtek8310 to have the new features?
I just tried updating my Qtek 8310 (English Version) with the I-Mate rom and it did not work. I got a "error 294 invalid vender ID" message.
Where can one find the appropriate rom? Has it been released?
Thanks.
Pierre.
you probably need to set the CID first
http://www.spv-developers.com
search for SPVServices
possible .. check http://board.riot.ru/showthread.php?p=30718#post30718 screens just updated on Tornado = Cingular 2125 ; i-Mate SP5/ SP5m ; O2 Orion ; Dopod C600 ; Qtek 8300 / 8310
Does any one know how to go around this? I have MDA Compact II and installed GERMAN ROM and now I'm Try to Image it to English ROM. But stuck on ERROR 294
Good if you could tell us what you have done (or trying to do)
E.g.
What are you using to install the English ROM
Where did you get your ROM from
When does the error message appear.
The more info the better.
Okay I have the MDA Compact II with a
ROM-Version: 2.6.2.28 GER
ROM-Datum: 3/9/06
Funkempfängerversion: 02.19.21
Protokoll-Version: 4.1.13.09
ExtROM-Version: 2.6.2.111
I want to install New Charmer Rom available 2.6.2 from UK to have it in Enlgish but when I tried to install I get an error invalid Vendor ID.
Need help.
I presume you are doing the ROM upgrade via the official ROM update facility.
Anyway, for you case, you may need to do it 'unofficially' using aWizard to flash a Charmer old English ROM (available in the FTP is someone didn't delete it) and update it to the new ROM using the official one.
Hello,
I was in WM 2003 in my Qtek s100 (radio 1.11.0) then i changed rom to cotulla 3.06 WWE (last version), it's works but now i want to have original rom, the english or the french one, i downloaded from trusted site, like Shipped-rom, etc...but everytime i flash it tells me that there is a problem.
The english one tells me "Country ID ERROR" the french one tells me the same, and the other french one tells me General Error, and it does not work when i use MaUpgradeUt_noID.exe, i really need to flash to the last original version of my Qtek s100 !!
Please help me !
Windows xp SP3 (32 bits) with ActiveSync installed, tried with disabled too.
Thankx
No one for help ?
Okey...thankx any way.
Darkmdex said:
Hello,
I was in WM 2003 in my Qtek s100 (radio 1.11.0) then i changed rom to cotulla 3.06 WWE (last version), it's works but now i want to have original rom, the english or the french one, i downloaded from trusted site, like Shipped-rom, etc...but everytime i flash it tells me that there is a problem.
The english one tells me "Country ID ERROR" the french one tells me the same, and the other french one tells me General Error, and it does not work when i use MaUpgradeUt_noID.exe, i really need to flash to the last original version of my Qtek s100 !!
Please help me !
Windows xp SP3 (32 bits) with ActiveSync installed, tried with disabled too.
Thankx
Click to expand...
Click to collapse
have you put the device into bootloader mode and use the MaUpgradeUt_noID.exe?
d-two said:
have you put the device into bootloader mode and use the MaUpgradeUt_noID.exe?
Click to expand...
Click to collapse
Yes i did ! it says upgrade from (nothing, it's blank) to (nothing, it's blank) then it says succesfull but when i boot the phone it's the same !
Do you have a solution please ?
Thankx