Hello everyone
now i have mi9 with broken screen touch is dead too , my files on the mi9 is very important for me and unfortunately usb debugging is off
so any ideas how i can bring the files back ??
You can restore by boot to fastboot and connect to pc install custom recovery for your Mi9 after done boot to custom recovery it will show all file on computer now you can restore any file
huyloi101 said:
You can restore by boot to fastboot and connect to pc install custom recovery for your Mi9 after done boot to custom recovery it will show all file on computer now you can restore any file
Click to expand...
Click to collapse
thank you so much but i think i need touch to install it ???
huyloi101 said:
You can restore by boot to fastboot and connect to pc install custom recovery for your Mi9 after done boot to custom recovery it will show all file on computer now you can restore any file
Click to expand...
Click to collapse
in the video he using touch and as i said my touch isnt working
MI9BROKENSCREEN said:
in the video he using touch and as i said my touch isnt working
Click to expand...
Click to collapse
no you just use button he just show you how to use it
MI9BROKENSCREEN said:
thank you so much but i think i need touch to install it ???
Click to expand...
Click to collapse
Just install it and boot like video that it no touch need
after that check your pc it maybe show your phone
huyloi101 said:
Just install it and boot like video that it no touch need
after that check your pc it maybe show your phone
Click to expand...
Click to collapse
To Shutdown maybe hold power button it turn off
1. connect phone to pc
2. boot fastboot like video is use button not touch
3. install follow video
4.after you do all it then he boot in and touch mean you dont need it was install just check your pc there is phone popup open it copy all ur file out
3:10 is how to use it you dont need to do it
MI9BROKENSCREEN said:
Hello everyone
now i have mi9 with broken screen touch is dead too , my files on the mi9 is very important for me and unfortunately usb debugging is off
so any ideas how i can bring the files back ??
Click to expand...
Click to collapse
If phone is USB-OTG-enabled then all you need is an USB-OTG-adaptercable to access the files from PC.
huyloi101 said:
1. connect phone to pc
2. boot fastboot like video is use button not touch
3. install follow video
4.after you do all it then he boot in and touch mean you dont need it was install just check your pc there is phone popup open it copy all ur file out
3:10 is how to use it you dont need to do it
Click to expand...
Click to collapse
thank you so much bro i will try that but its ok if i have a password and usb debugging is off ??
jwoegerbauer said:
If phone is USB-OTG-enabled then all you need is an USB-OTG-adaptercable to access the files from PC.
Click to expand...
Click to collapse
phone locked with password i cant use touch too
MI9BROKENSCREEN said:
thank you so much bro i will try that but its ok if i have a password and usb debugging is off ??
Click to expand...
Click to collapse
it ok that not need passwrod or usb debug
MI9BROKENSCREEN said:
phone locked with password i cant use touch too
Click to expand...
Click to collapse
Android has a built-in feature since version 5 called Smart Lock. It’s a proximity-based condition for your lock screen that keeps your phone unlocked when it is in one of three places:
On your person (like in your pocket or in your hand)
At a location that you have specified
Near another Android device that you have specified
If Smart Lock wasn't enabled on phone then the suggested USB-OTG method of course doesn't work.
Related
Hi.
I own a phone with busted screen. The screen is completely dark (well a corner of it is glowing slightly - so it's booting ) and touch is not working. I figured I will use this phone as a hidden remote security cam on my propetry. I need to be able to controll it remotely via web but this is not the issue.
I would like to know is there any way to control recovery or fastboot via PC so I can actualy see what's going on on the screen?
I know about screencast but I'm not sure if it works under recovery. I have to flash GB and root the device and install some additional apps required for the security purpose.
Thanks.
mw
Anyone knows the answer? Please...
mykail said:
Hi.
I own a phone with busted screen. The screen is completely dark (well a corner of it is glowing slightly - so it's booting ) and touch is not working. I figured I will use this phone as a hidden remote security cam on my propetry. I need to be able to controll it remotely via web but this is not the issue.
I would like to know is there any way to control recovery or fastboot via PC so I can actualy see what's going on on the screen?
I know about screencast but I'm not sure if it works under recovery. I have to flash GB and root the device and install some additional apps required for the security purpose.
Thanks.
mw
Click to expand...
Click to collapse
I think u may not,because PC needs ur mobile to be in debugging mode.Since u go to recovery the of and mobile will not be in contact.
Why can't u flash it via PC only,.....
SENT FROM MONSTER ! ! !
HIT THANX OR I WILL JUST
CRY...
Well maybe I can. But what about configuring the phone afterwards. Any way to skip it? Or should I just try to enable debugging via ADB and go with pushiing apps like webkey or just using screencast?
Thanks.
sanjaykumar.sanjay69 said:
I think u may not,because PC needs ur mobile to be in debugging mode.Since u go to recovery the of and mobile will not be in contact.
Why can't u flash it via PC only,.....
SENT FROM MONSTER ! ! !
HIT THANX OR I WILL JUST
CRY...
Click to expand...
Click to collapse
To access recovery, you can either use a combination of buttons on your phone or, navigate to platform-tools in the android sdk in terminal then: fastboot reboot recovery
On a mac: ./fastboot reboot recovery
The most simple solution would be to order a new display from ebay and replace it.
But to answer your question: no, you cant control your phone via PC while it is in recovery mode.
Sent from my Xperia X10 using xda app-developers app
Hi everyone,
My friend had a car accident. He's dead. But the phone in his pocket is still alive.
His widow ask me if i can get pictures out of his galaxy s6. It was their main camera and there are a lot of picture of their family and their little 3 years old daughter.
The phone is locked on fingerprint screen, can you help me to get their pictures ??
ps : I tested with adb in download mode but the phone is not recognize by adb
Thank you very much.
First of all, sorry to hear that.
I can help you via TeamViewer if you want.
tom1309 said:
Hi everyone,
My friend had a car accident. He's dead. But the phone in his pocket is still alive.
His widow ask me if i can get pictures out of his galaxy s6. It was their main camera and there are a lot of picture of their family and their little 3 years old daughter.
The phone is locked on fingerprint screen, can you help me to get their pictures ??
ps : I tested with adb in download mode but the phone is not recognize by adb
Thank you very much.
Click to expand...
Click to collapse
Flash TWRP in Download Mode, connect to PC and copy all DATA to the PC from Internal Storage
UltraGamerHD said:
Flash TWRP in Download Mode, connect to PC and copy all DATA to the PC from Internal Storage
Click to expand...
Click to collapse
Thanks for your answer.
Can you confirm me that flashing will not erase the pictures ! Sorry but it is so important for her.
I found this on internet, is it the right way to do this ?
#Flashing Via ODIN
1.Download and install Odin on your PC.
2.Once you have Odin installed in your PC the TWRP recovery.tar file from the download link.
3.Power off your device. Turn on your device using the proper key combo to get into download mode and attach the device to your computer via a USB cable.
4.Use the PDA tab or button to browse to and select the tar file that you downloaded and flash the device.
Click to expand...
Click to collapse
Thank you
forumber2 said:
First of all, sorry to hear that.
I can help you via TeamViewer if you want.
Click to expand...
Click to collapse
Thank you, it is very kind of you !
But i will test the method proposed by UltraGamerHD first.
Do you think it is a good solution ?
tom1309 said:
Thank you, it is very kind of you !
But i will test the method proposed by UltraGamerHD first.
Do you think it is a good solution ?
Click to expand...
Click to collapse
Even the MTP is not working perfectly on regular Android system but on TWRP, it really sucks.
Yes, you need to install TWRP Recovery BUT the best thing is get the files with ADB command;
adb pull /data/media
But first, check FRP is turned off from download mode.
forumber2 said:
Even the MTP is not working perfectly on regular Android system but on TWRP, it really sucks.
Yes, you need to install TWRP Recovery BUT the best thing is get the files with ADB command;
adb pull /data/media
But first, check FRP is turned off from download mode.
Click to expand...
Click to collapse
Nice, ok for the twrp so !
And how can I check if FRP is turned off ??
tom1309 said:
Nice, ok for the twrp so !
And how can I check if FRP is turned off ??
Click to expand...
Click to collapse
When you in download mode, check the "REACTIVATION LOCK" status, it needs to be "OFF"
Thank you very much
I pulled all the pictures from the phone thanks to you !!
tom1309 said:
Thank you very much
I pulled all the pictures from the phone thanks to you !!
Click to expand...
Click to collapse
I everyone,
the widow of my friend has just find an old samsung galaxy s2 containing photos and videos and would like to do the same as for the S6.
But i can't get it worked.
The phone is on the lock screen (no google account option), the usb debugging is not enabled and i don't know what to do !
Any help would be very appreciated
Hello guys, my phone dropped today and half of the screen is not working anymore. Also the touch does not seem to work. The problem is I just want to copy my photos to my computer but i cant because of the phone is locked and it needs a pattern password to unlock. Is there anyway without replacing the screen to copy my photos or unlock the phone. Thank you.
Hi,
You can plug an OTG cable and plug in a mouse to work around the touch screen issue. Other possibility is trying to boot in recovery mode to manage the files via USB, though I'm not sure if it would allow you to access internal data using adb or not.
All the best,
~Lord
XxLordxX said:
Hi,
You can plug an OTG cable and plug in a mouse to work around the touch screen issue. Other possibility is trying to boot in recovery mode to manage the files via USB, though I'm not sure if it would allow you to access internal data using adb or not.
All the best,
~Lord
Click to expand...
Click to collapse
Hey i do have the USB OTG and i plugged in a mouse to try to enable the adb debugging but the problem is that i can't see the screen so i am working blindly and trying to 'guess' where i should click.
The thing is i can unlock my phone with the fingerprint, but when i connect it to the computer the files do not show, i believe there is a button i have to click to enable MTP ?
I really can't believe its that hard to copy some files from my phone just because the screen is black
Hi,
Yes there is a button to enable MTP and it is in fact hard to enable it without looking at the screen. Have you tried booting in Recovery to access your files?
All the best,
~Lord
XxLordxX said:
Hi,
Yes there is a button to enable MTP and it is in fact hard to enable it without looking at the screen. Have you tried booting in Recovery to access your files?
All the best,
~Lord
Click to expand...
Click to collapse
Yea but i have the stock recovery is there a process/way to access my files other than just booting to recovert?
My phone has latest stock rom and rooted.
Please any help to recover my files since i was checking a screen repair will cost me around 200$
You must instal twrp recovery, with odin. After boot into twrp. So i rimember, twrp mtps is active defoult.
levanitit said:
You must instal twrp recovery, with odin. After boot into twrp. So i rimember, twrp mtps is active defoult.
Click to expand...
Click to collapse
i tried with my older S3 before doing all this process on the S6. I already have TWRP on the S3 and you are write when i click the button on the right it says MTP is enabled but when i plug it in the PC, the device doesn't show any files? any ideas on how to fix this/ can you try it on your device?
Thanks in advance.
Me too hade same problem. It is usb driver problem. I insttal driver and fixed. but dont rimmeber wich one. Search youtube twrp mtp problem.
You can use it to revive your op6, if you can boot in fastboot and have done the stuff with drivers (qualcomm)
MsmDownloadTool V4.0 International (Oxygen OS 5.1.5)
May 2018 Android patches
https://mega.nz/#F!CfBG0IgZ!Gmnu6B-a7yFyvMLNw_pz8w
https://www.androidfilehost.com/?fid=746163614322268729
Guide how to revive your op6:
First of all, you need to access to fastboot mode, if you can't , contact Oneplus support, then have a windows computer and download these file and drivers qualcomm ( https://androidfilehost.com/?fid=24052804347798730) and extract in one folder.
After you have all the file ready, plug in the phone to the computer, go in device manager and under port (COM) disinstall qualcomm one (oneplus 6) and then unplug.
Now you have to go in Windows test mode to not let him install default drivers, so:
windows key (on keyboard) + X, windows powershell (or normal prompt) administrator and write and enter: bcdedit /set testsigning on ( you will repeat the same process with "off" to stop the test mode after you will finish to do all the things).
Reboot the system and you could see in bottom right corner the test mode, now you are ready to install properly drivers.
Power off the phone, then hold for 5 seconds vol up and plug the usb to computer. Now you have to see US8_BULK as new device connected and you can also see in device manager; if you can't notice it, repeat the process until you see it (power on, power off, hold...) there is a full youtube guide for op5 and it's the same process (https://www.youtube.com/watch?v=PpLvmID1wdI)
Right click con US8_BULK in device manager and update drivers by system files (go to the folder's drivers you had extracted before).
Now you should see qualcomm drivers under port (COM).
You are ready to let the tool to do all the stuff, so let plugged the phone, always powered off, right click on msmdownloadtool and execute as administrator.
You should see your device and click start to begin the process; if it gives you some error (like sahara or something else), unplug, power on, power off and the plug it again, now it should be fine.
And that's it, the tool will do all the work and, at the end, you will have like a brand new phone ready to a new setup.
EDIT: if you are stucked in bootloader, you have only to power off and continue with the part: ... hold for 5 seconds vol up... (it happened in page 4)
Please, consider to donate me something for the work and the risk (maybe idk). Thanks
https://www.paypal.me/Imadalek
Only BTC: 3P5PnpTLpfRp2LWTfh8AkL7GCU1kAGxvM4
Only ETH: 0xE3F462A1aC3dBa8bEc3179535C0b6688d9D13106
Only LTC: MGwHMU4qEB6pRX7apQEBYkUrm1iL7Sa2NY
(Thanks to @nytebird for the contribution)
If you want to buy another Oneplus 6, this is my referral to have 20€/$ discount on accessory:
https://www.oneplus.com/it/invite#2CQD9VHNXPFA2B
Awesome saw u on r/OnePlus telegram
How did you get these files?
Could be from phonandroid, since the tool is there for download since 5 days .
MickyFoley said:
Could be from phonandroid, since the tool is there for download since 5 days .
Click to expand...
Click to collapse
The international one? Are you sure? I have found only the chinese that puts Hydrogen OS restoring
OnePlus telegram? Someone pm me the link
Thanks for the tool :good::good:
Can someone upload it in any other site. I am unable to download. :crying:
anthonythangaraj said:
Thanks for the tool :good::good:
Can someone upload it in any other site. I am unable to download. :crying:
Click to expand...
Click to collapse
Check Desktop Site box in your browser.
Plz mirror the link .
hello would it be possible to have the same thing with the update 5.1.3 thanks in advance
lerieur said:
hello would it be possible to have the same thing with the update 5.1.3 thanks in advance
Click to expand...
Click to collapse
No way; the techs come to you with this
Pls reply anyone who tried this to restore op6. Proper files also pls link for proper guide
mirror plzz
Panssee said:
mirror plzz
Click to expand...
Click to collapse
I'm trying to get developer permission to android file host
milav said:
Pls reply anyone who tried this to restore op6. Proper files also pls link for proper guide
Click to expand...
Click to collapse
I will edit first post to explain all in detail
milav said:
Pls reply anyone who tried this to restore op6. Proper files also pls link for proper guide
Click to expand...
Click to collapse
done
Easiest way is to be in system and turn on adb debugging and run adb reboot edl then go about the install
joemossjr said:
Easiest way is to be in system and turn on adb debugging and run adb reboot edl then go about the install
Click to expand...
Click to collapse
If you have system access, there is no point to use this tool/guide I was able only to boot in fastboot
Test with 128 GB version about 10-15 minutes (with already installed drivers): OK
It runs like a new shipped OP6.
Fivegates said:
If you have system access, there is no point to use this tool/guide I was able only to boot in fastboot
Click to expand...
Click to collapse
Lol oh yeah
Qualcomm tool is not for fastboot or recovery mode, but for qualcomm drivers mode (USB to serial port).
So if you can boot to recovery or fastboot, probably don't need this pack.
Hey Friends,
You must have seen very good days with Lenovo P2 but when there comes a bad day when your phone stops responding to button holds and restarts. You may or may not have a clue what to do to get your phone working again just like before.
I got into this situation where only thing my phone was able to operate was a RED LED on connecting it to my laptop. Then I had to read tens of pages on XDA to find answers to all my questions. If you are in such a situation and your phone is UNLOCKED then you have come to the right place. Procedure is quite simple but remember, I am writing this guide to define complete process from blackout to complete update so follow this guide as per your needs.
I faced this situation of Total Blackout / Dead Phone (Almost) with only Red LED working and it can be very scary. So, here is the simplest procedure you can follow. I want to appreciate all those people who helped me in finding a way to boot my phone with each and everything working. Long story short, let's get this done.
Tools Required:
I am mentioning here all the Tools you will need. I will urge you to download and save these tools in case you want to unbrick your phone any time:
1. Minimal ADB and Fastboot setup for PC
2. Lenovo USB drivers v1.1.33
3. Qualcomm USB Drivers
4. Qualcomm Flash Image Loader (QFIL) v2.0.1.9 for your PC in case you have corrupted your phone's IMEI and/ or Baseband
5. Blankflash.bat in case you want to recover from total blackout (Attached)
6. Stock MM S048 Firmware for Lenovo P2 in case phone doesn't boot
7. S048_ModemTelephony.zip in case your phone boots through Stock MM S048 but SIM isn't detected and IMEI is missing. I have made a complete modem zip file for installation through recovery.
8. S251_ModemTelephony.zip in case your phone is on latest firmware and doesn't detect SIM and has lost IMEI. I have made a complete modem zip file for installation through recovery.
9. QCN file for recovering baseband version and giving you most precious network signals. (Attached)
10. WinRAR or PeaZip for uncompressing files
I will recommend you to have a specific folder for keeping all these tools in a single place.
Procedure for Unbricking:
Before going with the procedure, make sure you have downloaded all the files you need, updated Lenovo and Qualcomm drivers etc. Here is the procedure:
1. If total blackout with red LED notification when connecting to PC: Unzip blankflash.zip to a folder in C drive. Now connect your P2 to PC through USB, press volume+, volume- and power button simultaneously and double click blankflash.bat. You might have no success in your first try. Just keep trying and it will load your phone to Fastboot. Restart your phone in TWRP if installed and install a working ROM for your phone after doing a wipe. If all is good and phone works OK then great but if you have lost IMEI and baseband then it is better to reinstate your phone through first MM stock ROM S048
2. Install S048 firmware through Minimal ADB and Fastboot - use flash instructions in .txt file.
3. Wait for startup of phone. Check if fingerprint, BT, WIFI and SIM work if all work then OK.
4. If fingerprint, BT, WIFI and SIM are not working then check IMEI through dialer. Dial *#06#. If IMEI is not available then install latest TWRP through Fastboot.
5. Start P2 in TWRP recovery and install S048_ModemTelephony.zip. Restart phone to see if WIFI and SIM work.
6. If SIM is detected but not giving signals and Baseband is shown as unknown then extract 000000_0.qcn file given in .7z and restore through QFIL and restart your phone into Fastboot.
7. Now, install stock recovery of S048 firmware through Fastboot and restart your phone.
8. Use your phone like you normally do and update your P2 till firmware S251 and see if everything works including calls. Update your phone through OTA.
9. After OTA installation, stock recovery may say that update failed. Just press Back, go into Wipe user data menu and Wipe Cache only. Restart your phone which will be updated to latest version and will ask you to update to a newer version. Allow it to download the next update.
10. After installation of S251 update, install latest TWRP through Fastboot and install most recent version of LOS 16 so that your vendor partition is stable and free from any bloated files. Now, use your phone just like you want to.
If you need further clarification then ask in this thread.
Bro my phone is not unlocked can i try thz one
Ranji007 said:
Bro my phone is not unlocked can i try thz one
Click to expand...
Click to collapse
You should download S048 and use flashall.bat inside that archive to install it all. However, if you lose IMEI or baseband then you can use modem and qcn files given in this thread.
alirazaagha said:
You should download S048 and use flashall.bat inside that archive to install it all. However, if you lose IMEI or baseband then you can use modem and qcn files given in this thread.
Click to expand...
Click to collapse
Bro now i wanna use ...minimal adb ..my phone is totally bricked only red light glowing
Ranji007 said:
Bro now i wanna use ...minimal adb ..my phone is totally bricked only red light glowing
Click to expand...
Click to collapse
don't worry just flash blank flash from the link given in the op, you will get the bootloader back
hackiee said:
don't worry just flash blank flash from the link given in the op, you will get the bootloader back
Click to expand...
Click to collapse
Bro how to connect my phone to blank flash...can u PLZZ help
hackiee said:
don't worry just flash blank flash from the link given in the op, you will get the bootloader back
Click to expand...
Click to collapse
Laptop is not detecting my device bro i installed all lenovo and Qualcomm drivers...any idea
Ranji007 said:
Laptop is not detecting my device bro i installed all lenovo and Qualcomm drivers...any idea
Click to expand...
Click to collapse
If red light blinks, your phone can be detected by your laptop. Check ports in device manager settings and you'll see a new port with Qualcomm 9800 series number. If that's there, try blankflash to start in fastboot. It might need some tries before startup. Be patient and keep trying till you are in fastboot.
alirazaagha said:
If red light blinks, your phone can be detected by your laptop. Check ports in device manager settings and you'll see a new port with Qualcomm 9800 series number. If that's there, try blankflash to start in fastboot. It might need some tries before startup. Be patient and keep trying till you are in fastboot.
Click to expand...
Click to collapse
Bro ..thanks for reply....in my phone red blink is glowing continuously ..but after connecting there is no change...can u say which buttons i want to press?
Ranji007 said:
Bro ..thanks for reply....in my phone red blink is glowing continuously ..but after connecting there is no change...can u say which buttons i want to press?
Click to expand...
Click to collapse
Press Volume+, Volume- and Power simultaneously and double click flashblank.bat. It might take some tries to finally install the scripts and start phone in fastboot. It took me 20+ tries to finally detect my phone through blankflash. Please, read OP completely.
alirazaagha said:
Press Volume+, Volume- and Power simultaneously and double click flashblank.bat. It might take some tries to finally install the scripts and start phone in fastboot. It took me 20+ tries to finally detect my phone through blankflash. Please, read OP completely.
Click to expand...
Click to collapse
Bro we want to connect each time removing usb cable and connect again like that ..we wanna do 20 times??
Ranji007 said:
Bro we want to connect each time removing usb cable and connect again like that ..we wanna do 20 times??
Click to expand...
Click to collapse
No. Keep USB connected. Try blankflash. If it doesn't detect phone or go ahead. Close command terminal, double click again and keep doing it till it processes the files. If it is stuck somewhere. Close terminal and try again.
alirazaagha said:
No. Keep USB connected. Try blankflash. If it doesn't detect phone or go ahead. Close command terminal, double click again and keep doing it till it processes the files. If it is stuck somewhere. Close terminal and try again.
Click to expand...
Click to collapse
Bro is there any solution ..i continuously pressed volume and power buttons connected to laptop and opening blank flash continuously for number of times ...but there was no reaction...only waiting for device is showing ? on my pc ...
Ranji007 said:
Bro is there any solution ..i continuously pressed volume and power buttons connected to laptop and opening blank flash continuously for number of times ...but there was no reaction...only waiting for device is showing ? on my pc ...
Click to expand...
Click to collapse
Check if your USB cable is alright and appropriate drivers are installed. Otherwise reinstall drivers, restart your PC and try again.
alirazaagha said:
Check if your USB cable is alright and appropriate drivers are installed. Otherwise reinstall drivers, restart your PC and try again.
Click to expand...
Click to collapse
Bro we want to change any settings in device manager ...?
Ranji007 said:
Bro we want to change any settings in device manager ...?
Click to expand...
Click to collapse
No. Just update drivers.
alirazaagha said:
No. Just update drivers.
Click to expand...
Click to collapse
Bro when u take to service center they said for u motherboard problem or something??
Ranji007 said:
Bro when u take to service center they said for u motherboard problem or something??
Click to expand...
Click to collapse
Fortunately, I never took it there.
alirazaagha said:
Fortunately, I never took it there.
Click to expand...
Click to collapse
My phone was fallen in water then i changed the display..few days after it stopped working ..and when i take to serive centre they said to change motherboard..but it's the 80% of phone price...so iam here ?..iam trying thiz method
Ranji007 said:
My phone was fallen in water then i changed the display..few days after it stopped working ..and when i take to serive centre they said to change motherboard..but it's the 80% of phone price...so iam here ..iam trying thiz method
Click to expand...
Click to collapse
I think you might have damaged some hardware. But anyway if you want to use blankflash, I have a method.
In lenovo p2 we have another mode called QDloader mode, in which we can use blankflash. For entering into this mode, it's little tricky but, can enter in one or two go.
So, here's how:
1. Switch off the mobile.
2. Press the volume up key,
3. While holding the volume up key, insert the usb cable and at the same time press the power button (this is the trick, we have to insert and hit at the same time).
And voila! :highfive: you will see black screen with only red notification led blinking.
we are into QDloader mode. Now use blankflash :good: