I have an old Tablet PC with an Allwinner A23 Quad-Core, 1GB RAM and 1GB, 5GB more storage, What's the maximum unofficial Android update that I can get?
I attached the CPU-Z screenshots for more info.
Forget it.
Impossible?
I think so. This because computer's system resources are too low where it doesn't matter whether Android should get run via emulator or via dual boot.
This is an android tablet, it don't use emulator or dual boot
FYI:
How I can install android 6 in my tablet?
I discovered that my tablet has an Allwinner A33
santi._.cr said:
I discovered that my tablet has an Allwinner A33
Click to expand...
Click to collapse
This SoC features a Quad-Core Cortex-A7 ARM CPU, and a Mali400 MP2 GPU from ARM. That's good.
The problem in your case is the little available RAM.
santi._.cr said:
How I can install android 6 in my tablet?
Click to expand...
Click to collapse
Find a Custom Recovery suitable to tablet, if found find a Custom Android 6 ROM suitable to tablet. If both found, flash the Custom Recovery and if successful flash the Custom Android 6 ROM via Custom Recovery.
Con you help me find, I'm a newbie, I want Android 5, 6 or 7, any that you find.
DIY
?
Related
Hi There
I'm fairly new to this android stuff but starting to get my head round some of it, I have a Natpc x210 also known as Kingpad Flytouch 9 I have managed to root it but now there are some things I would like to do
First I would like to back up my original firmware and from what I have read I need to use clockwork but I get an error message when I try and install this saying it isn't compatible with my tablet so does anyone know how I can do a backup of my original firmware (rom).
I would also like to edit the build prop to try and cure the incompatibility of some of the game on Google market, would it be possible for someone to tell me what exactly to edit in the build prop, I have heard of people putting there tablets into a loop and almost bricking them so I want to be sure what I'm doing.
And I would also like to know if there are any custom Roms I could try on this tablet.
Below is the spec
CPU : Rockchip Dual Core (2 x 1.5GHz)
Graphics Processor : 4 x Mali 400 MHz
Touchscreen : 1024 x 600 10-point touch 10.1" CAPACITIVE;
Operating System : Android 4.1.1 JELLY BEAN
Memory : 1GB DDR III / 16GB NAND Flash - upgradeable by Micro SD memory card (max 32GB)
WiFi : 802.11 b/g/n
Connectivity : 1 x Micro SD slot, 1 x AC Jack, 1 x 3.5mm Earphone Jack, 2 x MINI Size USB, 1 x mini HDMI out
Camera : 0.3mp Front facing / 2.0mp rear facing
Android Market / Google Play Store : YES
G Sensor : YES
Dimensions : 253 x 167 x 13mm
Weight :480g
Cheers
Fermec
Hi fermec i don't have any answers for you but wondering if you cold help me i have the same device as you and am trying to root it. Could you post the method you used.,especaly how to get usb driver, thanks
I came across this post for rooting Rockchip 3066 tablets.
How to Root Teclast A10 Dual-core
The tool is all in Chinese but you don't need to read whats happening anyway. The tablet reboots itself twice. After the first reboot I had to hard reset.
These are the steps.
Install app on Windows (7Pro x64)
turn developer mode on device (Sumvision Cyclone Titan 9.7", Rockchip 3066, Mali400, Android 4.0.4)
plug the device in and wait for the tool to recognize it
click the button next to the only english word on the app 'ROOT'
wait a minute or two and the device reboots
i had to hard reset here
turn on device again
after a minute the tablet rebooted
walla, Rooted rockchip 3066 device.
link for Root Tool
http://www.multiupload.nl/5L8T1YRAC6
I have managed to root my tablet (natpc x210) using this method but this is the way had to do it, to get my laptop win xp 32bit to see the tablet i had to install ADB Driver this is a setup file then I attached the laptop put the tablet in usb debug mode, then I started the software and it automatically sees the tablet, then just click root wait for it to finish and that is it rooted,
Worked a treat for me
Fermec
Thanks for reply and links, did all of that wasn't sure about ABD thing so i used morobo ,now my tablet says it's rooted according to a few apps that check for root but the apps i want eg titanium rb sync wont install any thoughts ?. Thanks again for your help
Maybe you need to install busybox to make them run properly?
flytouch 9
omgomg said:
Maybe you need to install busybox to make them run properly?
Click to expand...
Click to collapse
I use this metod ,stuff24.de/blog/howto-root-minix-neo-x5-g4-rk3066/
use update 1 ,and install supersu.
Working good For flytouch 9
Is there a custom rom avalible for Natpc x210 also known as Kingpad Flytouch 9
Hello i have allwinner 10 tablet
Basic Info.
Model NO.: N500
Screen Type: Capacitive Screen
Operating System: Android
Screen Size: ≥10.1"
Webcam: Webcam
Memory: 512MB
Built-in Microphone: Built-in Microphone
Network Mode: WiFi
Built-in Bluetooth: Without Bluetooth
CPU Core: Single-Core
Card Reader: Card Reader
Fingerprint: Without Fingerprint
Hard Disk Capacity: ≤8G
CPU Type: Boxchip
Frequency: 1.5GHz
Which has stuck on boot screen, so i tried to flash firmware. Now it's jus backlight coming on. Tried about ~30 roms allready but no luck. Can someone point me in what todo ? Or can someone send me original firmware becouse i can't find. Thank you for your time.
Have you tried CM10 ROMs by Christian Troy. They are generic so they should boot on any Allwinner a10. i own ICOO D70W works for me.
here is the link
http://forum.xda-developers.com/showthread.php?t=1821398
prratha93 said:
Have you tried CM10 ROMs by Christian Troy. They are generic so they should boot on any Allwinner a10. i own ICOO D70W works for me.
here is the link
http://forum.xda-developers.com/showthread.php?t=1821398
Click to expand...
Click to collapse
Don't know how to deal with them. Installed adodb drivers and now I can see that tablet is running just nothing shows on the screen.
mister_junior said:
Don't know how to deal with them. Installed adodb drivers and now I can see that tablet is running just nothing shows on the screen.
Click to expand...
Click to collapse
Apk installer shows that tablet is running and i can get view of tablet, but what i see is only backlight. What shoud i do to unlock the screen ?
I've searching everywhere nothings working on rooting my device Devant D-Tab 701
Here's Tablet Specification
MODEL- DT-701
Series - Orion
CPU - Rockchip (RK3066) ARM Cortex A9 1.6GHz (Dual Core)
Android Platform - Android 4.1.1 (Jelly Bean)
Flash Memory - 8Gb
RAM - 1Gb
DISPLAY PANEL - 7.0"
GPU Type - ARM
GPU Renderer - Mali-400 MP4
GPU (Graphic Processing Unit) - Quad Core
I tried SuperOneClick[x], ZhuoDaShi-2.2.9[x], Manually rooting using psneuter on cmd[x], and flashing update.zip method[x]
is there any other way to root this tab?
While I don't have experience with your specific tablet, I have gone through rooting a similar RK3066 tablet.
Many of the Rockchip tablets already aren't locked down and they just need Superuser or SuperSU installed, but sounds like you may have tried that already.
If it is locked, first I would try Kingo Root.
If you need/want custom recovery, check CWM ported for Rockchip.
If you're lucky, your kernel partition has a valid kernel (mine didn't tho) and the generic RK3066 recovery will work. Make sure you back up your stock recovery first!!!!.
If you need further assistance, please reply on the linked threads.
Post here about this new (aug 2019) tablet....
I was finally able to get android 10 PHH installed on this tablet (model M4P7)..version 221
had to go through alot of crap to get it done...but finally works (and works good...so far)
if anyone wants a guide let me know and I will post the instructions
You can get this tablet for 145$ on aliexpress for the 4gb ram and 128gb internal storage version
Teclast M30 Tablet Full Specification
Processor (Clock): 2x 2.6 GHz ARM Cortex-A72 4x 2.0 GHz ARM Cortex-A53 4x 1.6 GHz ARM Cortex-A53
Memory (RAM): 4GB LPDDR3, 800 MHz
Internal Storage: 128GB, eMMC
Screen (Size & Type): 10.1 Inches
Camera Overview: 5 Megapixels / 2 Megapixels
OS Version: Android 8.0 Oreo OS
Key Features
Brand – Teclast
Model – M30
Device Type – Android Tablet PC
CPU – Deca-Core 2x 2.6 GHz ARM Cortex-A72 4x 2.0 GHz ARM Cortex-A53 4x 1.6 GHz ARM Cortex-A53 CPU Clock
Chipset – MediaTek Helio X27 (MT6797X), 64-bit Processor
GPU – ARM Mali-T880 MP4, 4 Cores, 875 MHz
Camera – 5 Megapixel Rear Camera | 2 Megapixel Front camera
Memory – RAM- 4GB LPDDR3 | ROM- 128GB with TF card slot up to 128GB
Display – Screen size 10.1 inches IPS Screen (2560 x 1600), 10-Point Touch Screen
Battery – Non-Removable 7500mAh Lithium-Polymer with 100-240V 5V 2.5A AC Adapter
SIM Card – Dual Hybrid Nano SIM
Sensors – Light, Accelerometer, Fingerprint
Color – Silver
Operating System – Android 8.0 Oreo OS
Dimensions – 240 mm x 170 mm x 10 mm
Weight – Grams (With Battery)
Port – 1 x Type Cv2.0 USB Port, 3.5 mm headphone jack, SD (TF) card expansion, Power Off/On, Speaker
More Features – Plastic and Aluminium Alloy Body, Dual Speakers, Bluetooth, LTE Cat 6, HSPA+, EV-DO Rev.A, Dual GPS, Wi-Fi, Capacitive IPS Display, Dual Camera, TF Slot, Quick Charging, Sweet Sound Dual Bottom Speaker, MIC, Type-C USB, Earphone Jack, Eye Care Mode, Reading Mode.
heres the firmware for the teclast tablets
https://docs.google.com/spreadsheet...ciediKQ3-_NW6zAda9xTNdbyqE/edit#gid=794945847
heres the option for installing android 9 or 10 on the m30...however I'm told it ONLY works on the M4P7 model
https://github.com/phhusson/treble_experimentations/wiki/Teclast-M30
heres a post about MTK chipset devices and a program to read information from them
https://4pda.ru/forum/index.php?showtopic=813767&st=0#Spoil-60035994-23
heres a video on how to use it
https://www.youtube.com/watch?v=pj4iFakq33M
if anyone needs SP FLASH TOOLS
https://spflashtools.com/windows/sp-flash-tool-v5-2020
Well, glad to see that this brand isn't dead.
Would you please " EXTRACT THE FIRMWARE ON THE M30". Thanks
KimLe: could you link a howto that describes the firmware extraction process under Linux? Of course I googled for it but I can't find straightforward information on this.
Is there twrp for this device
([emoji3590]09-09-18[emoji3590])
PoochyX said:
Is there twrp for this device
([emoji3590]09-09-18[emoji3590])
Click to expand...
Click to collapse
Not yet.
XX7u said:
KimLe: could you link a howto that describes the firmware extraction process under Linux? Of course I googled for it but I can't find straightforward information on this.
Click to expand...
Click to collapse
You should ask TechGuru123.
https://pan.baidu.com/s/1UPd0JVu1HRKnvQccWpbREw
heres the current firmware
if you want to get firmwares in the future
go here
http://www.teclast.com/tools/pad/pad.php?t=p and enter M4P7 for the device ID
password for baidu as of the time of this post is "jotg"
This Baidu link is dead.
Who's got a working download link for this Teclast M30 stock firmware.
:good:
I managed to get the firmware/rar package from BAIDU if anyone wants it
https://gofile.io/?c=yZyPnD
anyone working on this?
I manage to root it by extract Boot.img , use MaGisk manager to create Magisk_patched.img and flash it with SP-Flash-tools.
m30
KimLe said:
I manage to root it by extract Boot.img , use MaGisk manager to create Magisk_patched.img and flash it with SP-Flash-tools.
Click to expand...
Click to collapse
post it up for people:highfive:
TechGuru123 said:
post it up for people:highfive:
Click to expand...
Click to collapse
I sold my tablet so I can't take any picture.
But you can follow the instructions here.
https://community.umidigi.com/forum.php?mod=viewthread&tid=17376
The firmware version from Baidu is 1.02, but the tablet has 1.03. Is it safe to flash Magisk_patched.img from 1.02 firmware to the 1.03 tablet?
gray1919 said:
The firmware version from Baidu is 1.02, but the tablet has 1.03. Is it safe to flash Magisk_patched.img from 1.02 firmware to the 1.03 tablet?
Click to expand...
Click to collapse
Yeah you should be alright.... I patched Kernals from one baseband to another baseband
([emoji3590]09-09-18[emoji3590])
zappa55 has made a rooted boot.img for anyone who wants it
https://gofile.io/?c=ggUvb1
TechGuru123 said:
zappa55 has made a rooted boot.img for anyone who wants it
https://gofile.io/?c=ggUvb1
Click to expand...
Click to collapse
So, I can flash this directly with SPFlash tool right or any other way? Have u tried?
But, how can I get a scatter file for SPFlash tool?
Reykawick said:
But, how can I get a scatter file for SPFlash tool?
Click to expand...
Click to collapse
Scatter file you can get in the firmware from the first page. But I'm not sure enough if it can be used in case the firmware versions are different.
gray1919 said:
Scatter file you can get in the firmware from the first page. But I'm not sure enough if it can be used in case the firmware versions are different.
Click to expand...
Click to collapse
It's OK to use the scatter file from firmware v1.02.
Works perfectly. After you have installed the new, patched boot.img - just restart the tablet and then install Magisk Manager apk.
Your device is now rooted
Hello everyone
Briefly , I try to understand HOW to mod our Sony BRAVIA 4K VH21 UC TV to go from 32 to 64 bit in order to install the Dolphin emulator.
on Dolphin website the requirements are :
System Requirements
The following are requirements your Android device needs to meet in order to install the application:
Android 5.0 or higher
A 64-bit processor (AArch64/ARMv8 or x86_64)
A version of Android that supports 64-bit applications
A graphics processor that supports OpenGL ES 3.0 or higher.
If your device fails to meet any of these requirements, attempting to install Dolphin will return an error message reading "Application not installed."
Note that some devices are equipped with 64-bit processors but ships with 32-bit builds of Android. Installation will fail on these devices as well. There's no way to fix this, and no manufacturer has updated a 32-bit only device to support 64-bit apps.
our Sony Bravia have theses specs :
-- Android 10
-- 4x ARM Cortex-A73 @ 1800 MHz / 64-bits ARMv8-A (Mode 32-bit)
-- OpenGL ES 3.2 v1
Downloaded DOLPHIN 5.0-17995 and APK installer
the app refuse to install saying the app is incompatible....
I feel im touching the dream at the tips of my fingers
Please tell me its fesable with my specs and how to proceed step by step
I HOPE someone will be able to help me (but you are all invited for sure
HAPPY NEW YEAR 2023 guys !
Install a Custom ROM that is compiled for 64-bit ARM SoC what is suitable to the device in question, what requires to install a suitable Custom Recovery before.
jwoegerbauer said:
Install a Custom ROM that is compiled for 64-bit ARM SoC what is suitable to the device in question, what requires to install a suitable Custom Recovery before.
Click to expand...
Click to collapse
Hi
thanks for your answer.
QUESTION 1 : BEFORE i proceed , did the process is reversible ?
It will not be hard/impossible to re-install app like youtube/netflix ?
QUESTION 2 : where i can find such custom rom ? I have to make it myself ?
QUESTION 3 : Did you have a step-by-step tutorial to do so ?
As you can see here obviously a Custom Recovery - what is prerequiste to install a Custom ROM - isn't available.
But may be you find one doing a related Google search.