Hello i have allwinner 10 tablet
Basic Info.
Model NO.: N500
Screen Type: Capacitive Screen
Operating System: Android
Screen Size: ≥10.1"
Webcam: Webcam
Memory: 512MB
Built-in Microphone: Built-in Microphone
Network Mode: WiFi
Built-in Bluetooth: Without Bluetooth
CPU Core: Single-Core
Card Reader: Card Reader
Fingerprint: Without Fingerprint
Hard Disk Capacity: ≤8G
CPU Type: Boxchip
Frequency: 1.5GHz
Which has stuck on boot screen, so i tried to flash firmware. Now it's jus backlight coming on. Tried about ~30 roms allready but no luck. Can someone point me in what todo ? Or can someone send me original firmware becouse i can't find. Thank you for your time.
Have you tried CM10 ROMs by Christian Troy. They are generic so they should boot on any Allwinner a10. i own ICOO D70W works for me.
here is the link
http://forum.xda-developers.com/showthread.php?t=1821398
prratha93 said:
Have you tried CM10 ROMs by Christian Troy. They are generic so they should boot on any Allwinner a10. i own ICOO D70W works for me.
here is the link
http://forum.xda-developers.com/showthread.php?t=1821398
Click to expand...
Click to collapse
Don't know how to deal with them. Installed adodb drivers and now I can see that tablet is running just nothing shows on the screen.
mister_junior said:
Don't know how to deal with them. Installed adodb drivers and now I can see that tablet is running just nothing shows on the screen.
Click to expand...
Click to collapse
Apk installer shows that tablet is running and i can get view of tablet, but what i see is only backlight. What shoud i do to unlock the screen ?
Related
Hi There
I'm fairly new to this android stuff but starting to get my head round some of it, I have a Natpc x210 also known as Kingpad Flytouch 9 I have managed to root it but now there are some things I would like to do
First I would like to back up my original firmware and from what I have read I need to use clockwork but I get an error message when I try and install this saying it isn't compatible with my tablet so does anyone know how I can do a backup of my original firmware (rom).
I would also like to edit the build prop to try and cure the incompatibility of some of the game on Google market, would it be possible for someone to tell me what exactly to edit in the build prop, I have heard of people putting there tablets into a loop and almost bricking them so I want to be sure what I'm doing.
And I would also like to know if there are any custom Roms I could try on this tablet.
Below is the spec
CPU : Rockchip Dual Core (2 x 1.5GHz)
Graphics Processor : 4 x Mali 400 MHz
Touchscreen : 1024 x 600 10-point touch 10.1" CAPACITIVE;
Operating System : Android 4.1.1 JELLY BEAN
Memory : 1GB DDR III / 16GB NAND Flash - upgradeable by Micro SD memory card (max 32GB)
WiFi : 802.11 b/g/n
Connectivity : 1 x Micro SD slot, 1 x AC Jack, 1 x 3.5mm Earphone Jack, 2 x MINI Size USB, 1 x mini HDMI out
Camera : 0.3mp Front facing / 2.0mp rear facing
Android Market / Google Play Store : YES
G Sensor : YES
Dimensions : 253 x 167 x 13mm
Weight :480g
Cheers
Fermec
Hi fermec i don't have any answers for you but wondering if you cold help me i have the same device as you and am trying to root it. Could you post the method you used.,especaly how to get usb driver, thanks
I came across this post for rooting Rockchip 3066 tablets.
How to Root Teclast A10 Dual-core
The tool is all in Chinese but you don't need to read whats happening anyway. The tablet reboots itself twice. After the first reboot I had to hard reset.
These are the steps.
Install app on Windows (7Pro x64)
turn developer mode on device (Sumvision Cyclone Titan 9.7", Rockchip 3066, Mali400, Android 4.0.4)
plug the device in and wait for the tool to recognize it
click the button next to the only english word on the app 'ROOT'
wait a minute or two and the device reboots
i had to hard reset here
turn on device again
after a minute the tablet rebooted
walla, Rooted rockchip 3066 device.
link for Root Tool
http://www.multiupload.nl/5L8T1YRAC6
I have managed to root my tablet (natpc x210) using this method but this is the way had to do it, to get my laptop win xp 32bit to see the tablet i had to install ADB Driver this is a setup file then I attached the laptop put the tablet in usb debug mode, then I started the software and it automatically sees the tablet, then just click root wait for it to finish and that is it rooted,
Worked a treat for me
Fermec
Thanks for reply and links, did all of that wasn't sure about ABD thing so i used morobo ,now my tablet says it's rooted according to a few apps that check for root but the apps i want eg titanium rb sync wont install any thoughts ?. Thanks again for your help
Maybe you need to install busybox to make them run properly?
flytouch 9
omgomg said:
Maybe you need to install busybox to make them run properly?
Click to expand...
Click to collapse
I use this metod ,stuff24.de/blog/howto-root-minix-neo-x5-g4-rk3066/
use update 1 ,and install supersu.
Working good For flytouch 9
Is there a custom rom avalible for Natpc x210 also known as Kingpad Flytouch 9
Item specifics
Unlock Phones: Yes
Display Color: Color
Brand Name: Star
Design: Bar
CPU: Quad Core
Cellular: GSM,WCDMA
Display Resolution: 1280x720
Touch Screen Type: Capacitive Screen
Screen LCD Type: TFT
SIM Card Quantity: Dual SIM Cards
RAM: 1G
CPU Manufacturer: MTK
Camera: 12MP
ROM: 8G
Operation System: Android 4.2.1
Feature: GPS Navigation,Email,FM Radio,MP3 Playback,Touchscreen,Bluetooth,Wi-Fi,Memory Card Slots,Video Player,Gravity Response,Message
Model Number: S1
Display Size: 5.8 Inch
color: Black and white
Display: 1280*720
CPU: Quad core MTK 6589
OS: Android 4.2
Screen: 5.8 Inch capacitive touch screen
WIFI: Support
GPS: Support
RAM: 1G
ROM: 8G
CWM5 - ClockWorkMod 5
CWM6 - ClockWorkMod 6
TWRP - Team Win Recovery Project 2.4.4.0 (support for saving NVRam)
Stock firmware v2. TWRP. PrePooted. - The standard firmware. Removed Chinese applications, SMS-senders. Contains TWRP and ROOT.
Stock firmware. CWM5. PrePooted. - The standard firmware. Removed Chinese applications, SMS-senders. Contains CWM and ROOT.
Lewa Rom - Lewa Rom from Russia for S1.
Guys, sorry for my english ...
Dear [email protected],
Is the stock ROM missing uboot, cache & user data ?
strangermj said:
Dear [email protected],
Is the stock ROM missing uboot, cache & user data ?
Click to expand...
Click to collapse
They are specifically deleted! Why do you need cache & user data - Chinese applications need? If they are needed - I can put them separately. No problem!
[email protected] said:
They are specifically deleted! Why do you need cache & user data - Chinese applications need? If they are needed - I can put them separately. No problem!
Click to expand...
Click to collapse
Actually I am a beginner and my star s1 was bricked.
I use flash tool to upgrade firmware, it said i need to tick all necessary files. At last i use download it can load your stock ROM to my s1. However, my s1 can boot up with the booting sound but the screen only have back light. When I touch the screen, it have feed back like click sound and virbate..... but nothing can see... only back light is on.
What's your CPU MTK6589 or MTK6577 - they come in two flavors!
[email protected] said:
What's your CPU MTK6589 or MTK6577 - they come in two flavors!
Click to expand...
Click to collapse
mtk6589
strangermj said:
mtk6589
Click to expand...
Click to collapse
I found that uboot is the driver of display, front and back camera. Can you upload S1 uboot ? something like uboot.bin or lk.bin
strangermj said:
I found that uboot is the driver of display, front and back camera. Can you upload S1 uboot ? something like uboot.bin or lk.bin
Click to expand...
Click to collapse
http://yadi.sk/d/SUhKiA244k1rO
[email protected] said:
http://yadi.sk/d/SUhKiA244k1rO
Click to expand...
Click to collapse
:good::good::good:
My Phone can boot up la :fingers-crossed::fingers-crossed::fingers-crossed:
Thank you very much.
few problems:
After boot up, it show invalid IMEI, whatsapp said my device is a tab
use the home key cannot wake up the screen
strangermj said:
After boot up, it show invalid IMEI
Click to expand...
Click to collapse
Repair IMEI by the engineering menu.
1. Click on the button to dial the number and enter * # * # 3646633 # * # * If you do not work (and we did not work) then put IT. and go to the point of prozhke Engineer Mode-> Engineer Mode (MTK)
2. We fall into the engineering menu and choose: "CDS Information", "Radio Information", "Phone1"
3. At the very pinnacle of the field where it says AT + add EGMR = 1,7, "vash_imei1" in itogde get the string AT + EGMR = 1,7, "vash_imei1" button and click "SEND AT COMMAND"
where vash_imei1 - this is your imei for the first SIM card
4. If you want to register for the second imei sim card, then in the same row is typed AT + EGMR = 1,10, "vash_imei2" again and click the button "SEND AT COMMAND"
5. Exit the engineering menu and restart your smartphone.
P.S: You can find the IMEI under the battery ...
strangermj said:
use the home key cannot wake up the screen
Click to expand...
Click to collapse
This is the factory, and later made a patch to fix it ....
finally I flash the ROM again and follow you instruction, it working now, thanks.
Now, I found a problem between bluetooth and 3G. When my Jawbone ICON HD connected, I can hear the sound clearly but my friend said my voice quality is very bad. Moreover, every time when I disconnect the call from my bluetooth, the 3G signal will lost and then need few second to search the network again. Is it the hardware limitation or software problem ?
Software...
I find bluetooth address Unavailable
Hello [email protected] i have same phone STAR S1 - i need a rom firmware you possibile help me ?
Thanks
I have a star G9300 mtk6577 android 4.1.1 y need to root any help me?
Sent from my e1920_v77_zlh_fwvga using xda premium
eminemskc said:
Hello [email protected] i have same phone STAR S1 - i know a mtk 6577 and have android 4.1.1 i need a rom firmware you possibile help me ?
Thanks
Click to expand...
Click to collapse
A little later lay the firmware for you to MTK6577.
how much does it?
The file will be available until 1 June 2013.
http://yadi.sk/d/MDUgH7fw5HLpe
Pls I have issues with downloading from the
server without resume capability, kindly help put
the rom for star s1 mtk6589 in a resume supported server. This will be
highly appreciated. Also is there an upgrade in
version of android available for this product yet?
Hello;
My brother tries to root this mobile and end up with Eastcom logo. Is there any way to resist or flash it? I know little about flashing, I flashed my Ainol Novo 7 Legend, but I cannot flash Eastcom dx2618. I don’t know where to get tool and firmware for it. I search on google, but cannot find anything about flashing or recovery or reset. Please help :crying:.
View attachment 2465551
Brand: Eastcom
Eastcom Model: dx2618
Network type: GSM
The main screen size: 4.0 inches
Operating system: ANDROID
Touch screen: Capacitive touch screen
CPU: MTK6515, 1 GHz
RAM memory to run: 256MB
Body memory ROM: 256MB
Keyboard Type: Virtual touch-screen keyboard
Camera Type: Dual cameras (front and rear)
Network mode: Dual card single-mode
Problem Solved
I download my mobile rom from chines site bbs.eastsea
and one thing, how to remove that post since i have solved my problem.
Hello !
It's my first message on this forum... I don't write verry good in English... sorry
First, thank you to read my post
Where can I find a firmware (.img) for (compatible with) my device Lenco Cooltab-72 version 1.2 ?
The official Lenco support won't give me the original...
If someone have this device, it will be verry friendly to dump the stock room and upload it...
It's easy to dump the stock rom ! The files are direct nammed e.g. "system" in /dev/block/...
I have already system.img and boot.img but I haven't others...
But for flash it, I ask to a developper to help me...
With verry good luck, I succeded to flash a time with PhoenixSuit (bcs my tablet work on Allwinner A20 processor). The flash was a success but the screen of my tablet is white (sometimes grey or blue or black... view on afterflash.jpg)... The tablet boot on recovery and adb detect it but <adb shell> don't work... When I put "adb reboot bootloader", the tablet reboot normaly (no bootloader) and usb debugging is not active... I will test to buy a mini-HDMI to HDMI cable to connect my tablet to a external screen, is it a good idea ?
I tested to make a bootable sd card for allwinner tablets... but when I instert this one in the tablet, it don't boot
Caracteristics
WARNING ! IT'S MADE IN CHINA !
Tablet: Lenco Cooltab-72 version 1.2
Processor: Allwinner a20 1,20 Ghz 1,20Ghz (dual core)
Memory: I think 2Go (1go to system and 1Go to data and userdata)
Original Android version: Android Jelly Bean 4.2.2
And more on to view on pix (bottom)...
build.prop is also in the folder...
I have a dekstop computer with dual OS (Windows 7 and Ubuntu 14.xx -last-) (I'm actually on Ubuntu)... (don't detect sdhd cards but I can connect it with a other phone)
I also have a laptop sony vaio with windows 7 and intel core 1.3 cpu... (it detect sdhd cards)
And so a sdhd card of 8GB SanDisk class {4}
Pix:
Mega Folder link (add the http): mega.co.nz/#F!oI5RWbqD!7ciaCt4C7qmDTvHp-AC7Uw
The pix is captured together demounting
Thank you for have understood this message I'm french, sorry...
And thank you to help me,
Ioionutella
Hi, I also have a lenco cooltab-72. I have googled a lot about this tablet and also found zero to nothing about it. I would really need some help because recently my tablet stopped updating his RTC (clock). Also would like some roms if there are
P.S since this is a Allwiner A20 i have found this community: http://www.techknow.me/forum/index.php?board=170.0 (you need to register to see some hidden forums)
Thank's ! I didn't view this community but it should be good
I will keep you to date
ioionutella said:
... Where can I find a firmware (.img) for (compatible with) my device Lenco Cooltab-72 version 1.2 ?
Click to expand...
Click to collapse
Try NeedROM.
You have to get an exact match between the firmware and your hardware, and that site is generally very good for that.
Thank you Belamigo, but there isn't my tablet on this website
I succeded to flash a new rom with debug default enabled !
Now, adb work ! all is working well except the screen I see the same like the other...
ioionutella said:
I succeded to flash a new rom with debug default enabled !
Now, adb work ! all is working well except the screen I see the same like the other...
Click to expand...
Click to collapse
Where did you got that rom?
On techknow forum
ioionutella said:
Hello !
It's my first message on this forum... I don't write verry good in English... sorry
First, thank you to read my post
Where can I find a firmware (.img) for (compatible with) my device Lenco Cooltab-72 version 1.2 ?
The official Lenco support won't give me the original...
If someone have this device, it will be verry friendly to dump the stock room and upload it...
It's easy to dump the stock rom ! The files are direct nammed e.g. "system" in /dev/block/...
I have already system.img and boot.img but I haven't others...
But for flash it, I ask to a developper to help me...
With verry good luck, I succeded to flash a time with PhoenixSuit (bcs my tablet work on Allwinner A20 processor). The flash was a success but the screen of my tablet is white (sometimes grey or blue or black... view on afterflash.jpg)... The tablet boot on recovery and adb detect it but <adb shell> don't work... When I put "adb reboot bootloader", the tablet reboot normaly (no bootloader) and usb debugging is not active... I will test to buy a mini-HDMI to HDMI cable to connect my tablet to a external screen, is it a good idea ?
I tested to make a bootable sd card for allwinner tablets... but when I instert this one in the tablet, it don't boot
Caracteristics
WARNING ! IT'S MADE IN CHINA !
Tablet: Lenco Cooltab-72 version 1.2
Processor: Allwinner a20 1,20 Ghz 1,20Ghz (dual core)
Memory: I think 2Go (1go to system and 1Go to data and userdata)
Original Android version: Android Jelly Bean 4.2.2
And more on to view on pix (bottom)...
build.prop is also in the folder...
I have a dekstop computer with dual OS (Windows 7 and Ubuntu 14.xx -last-) (I'm actually on Ubuntu)... (don't detect sdhd cards but I can connect it with a other phone)
I also have a laptop sony vaio with windows 7 and intel core 1.3 cpu... (it detect sdhd cards)
And so a sdhd card of 8GB SanDisk class {4}
Pix:
Mega Folder link (add the http): mega.co.nz/#F!oI5RWbqD!7ciaCt4C7qmDTvHp-AC7Uw
The pix is captured together demounting
Thank you for have understood this message I'm french, sorry...
And thank you to help me,
Ioionutella
Click to expand...
Click to collapse
https://lencosupport.zendesk.com/forums/20467832-Firmware-GB-
https://lencosupport.zendesk.com/entries/26108701-Cooltab-72
26108701-Cooltab-72
marcars said:
lenco.eu/supportfiles/Firmware/Cooltab-72_Fixed_Skype.rar
Click to expand...
Click to collapse
for all who are searching like me
Lenco TAB-1035
marcars said:
https://lencosupport.zendesk.com/forums/20467832-Firmware-GB-
https://lencosupport.zendesk.com/entries/26108701-Cooltab-72
Click to expand...
Click to collapse
Hi mister. My tablet Lenco TAB-1035 does not work.I can not open an account.How then I download the firmware. Thank you.
Hello! I have a colorfly g708 tablet with MT6592 processer. Discription of the device is here.
[$65.10] Colorfly G708 Tablet PC 8GB
Features 1. MTK6592 Octa Core Cortex-A7 1.4GHz CPU 2. Android 4.4 operating system 3. Support Bluetooth, WiFi, GPS, single micro SIM, GSM & WCDMA 4. 7.0 inch IPS multi-point capacitive touch screen 5. Integrated Bluetooth V4.0 for wireless data transmission 6. 1280*800 screen...
www.sunsky-online.com
Can anybody upload valid twrp recovery for this device.
I have checked this site(https://4pda.ru/forum/index.php?showtopic=644132&st=80#entry38351916) But it is showing file not found error.
It would be of great help if you find the recovery file.
Thankyou in advance.