Hello i have allwinner 10 tablet
Basic Info.
Model NO.: N500
Screen Type: Capacitive Screen
Operating System: Android
Screen Size: ≥10.1"
Webcam: Webcam
Memory: 512MB
Built-in Microphone: Built-in Microphone
Network Mode: WiFi
Built-in Bluetooth: Without Bluetooth
CPU Core: Single-Core
Card Reader: Card Reader
Fingerprint: Without Fingerprint
Hard Disk Capacity: ≤8G
CPU Type: Boxchip
Frequency: 1.5GHz
Which has stuck on boot screen, so i tried to flash firmware. Now it's jus backlight coming on. Tried about ~30 roms allready but no luck. Can someone point me in what todo ? Or can someone send me original firmware becouse i can't find. Thank you for your time.
Have you tried CM10 ROMs by Christian Troy. They are generic so they should boot on any Allwinner a10. i own ICOO D70W works for me.
here is the link
http://forum.xda-developers.com/showthread.php?t=1821398
prratha93 said:
Have you tried CM10 ROMs by Christian Troy. They are generic so they should boot on any Allwinner a10. i own ICOO D70W works for me.
here is the link
http://forum.xda-developers.com/showthread.php?t=1821398
Click to expand...
Click to collapse
Don't know how to deal with them. Installed adodb drivers and now I can see that tablet is running just nothing shows on the screen.
mister_junior said:
Don't know how to deal with them. Installed adodb drivers and now I can see that tablet is running just nothing shows on the screen.
Click to expand...
Click to collapse
Apk installer shows that tablet is running and i can get view of tablet, but what i see is only backlight. What shoud i do to unlock the screen ?
Hello;
My brother tries to root this mobile and end up with Eastcom logo. Is there any way to resist or flash it? I know little about flashing, I flashed my Ainol Novo 7 Legend, but I cannot flash Eastcom dx2618. I don’t know where to get tool and firmware for it. I search on google, but cannot find anything about flashing or recovery or reset. Please help :crying:.
View attachment 2465551
Brand: Eastcom
Eastcom Model: dx2618
Network type: GSM
The main screen size: 4.0 inches
Operating system: ANDROID
Touch screen: Capacitive touch screen
CPU: MTK6515, 1 GHz
RAM memory to run: 256MB
Body memory ROM: 256MB
Keyboard Type: Virtual touch-screen keyboard
Camera Type: Dual cameras (front and rear)
Network mode: Dual card single-mode
Problem Solved
I download my mobile rom from chines site bbs.eastsea
and one thing, how to remove that post since i have solved my problem.
Hi everyone.
I bought this receiver last month and I have a problem with external modem – unit descriptions below:
Brand Name: ROADRISION
Display Size: 7"
TF/Micro SD Slot: 2
ROM: 32G
Model Name: RRA7844A
RAM: 4G
Operating System: Android 8.0
Screen: 1024*600 Capacitive touch screen
CPU: Coretex A53 Octa core px5
I can't connect any modem. I don't want use connection thru WI-FI from my phone - if radio have wi-fi cable to connect modem I want to use it.
Does anyone have this receiver and maybe knows how to connect modem?
Maybe someone can help me to root this radio or can tell me did I can downgrade to android 6.0.1 - but I can't find ROM for this model.
maybe anyone knows how to get into recovery mode?
I took some Pictures of radio and system info:
https : //pl. pinterest. com / bik0408 / roadrision /
For any feedback. THX
Help me find the firmware with a working touchscreen on a Chinese NoName tablet:
Characteristics:
CPU: ALLWINNER TECH A33 QUAD CORE J8276BA 69M21
RAM: 1 gb
Flash: 8 gb
Touchscreen model DDQ8-A1
Touchscreen processing chip CST21680
The only workable firmware that I found (wifi, bluetooth, I did not test the rest):
h t t p s : / / yadi. sk/d /3 x m-l D 54 c6v puQ
But the touchscreen does not work in it.
On the advice from the Internet, it’s useful to look at the loop number, but there is nothing on it.
In Windows 7 Explorer, it was defined as: q9ledmtp, Google did not give anything.
From what I remember on a working factory firmware, the build date was 2018.
On the motherboard number: TJ-Q82_V51_20181227.
On the SD card slot sticker with: 312001 Q82B3_V51 512/8 / HRF
P.s. all firmware from https: / / cloud. mail. ru / public / e 4a0 1c0091 ae/All win ner%20 A33 not worked.
Outwardly similar to q88.
Sorry, this text transleted.
Post here about this new (aug 2019) tablet....
I was finally able to get android 10 PHH installed on this tablet (model M4P7)..version 221
had to go through alot of crap to get it done...but finally works (and works good...so far)
if anyone wants a guide let me know and I will post the instructions
You can get this tablet for 145$ on aliexpress for the 4gb ram and 128gb internal storage version
Teclast M30 Tablet Full Specification
Processor (Clock): 2x 2.6 GHz ARM Cortex-A72 4x 2.0 GHz ARM Cortex-A53 4x 1.6 GHz ARM Cortex-A53
Memory (RAM): 4GB LPDDR3, 800 MHz
Internal Storage: 128GB, eMMC
Screen (Size & Type): 10.1 Inches
Camera Overview: 5 Megapixels / 2 Megapixels
OS Version: Android 8.0 Oreo OS
Key Features
Brand – Teclast
Model – M30
Device Type – Android Tablet PC
CPU – Deca-Core 2x 2.6 GHz ARM Cortex-A72 4x 2.0 GHz ARM Cortex-A53 4x 1.6 GHz ARM Cortex-A53 CPU Clock
Chipset – MediaTek Helio X27 (MT6797X), 64-bit Processor
GPU – ARM Mali-T880 MP4, 4 Cores, 875 MHz
Camera – 5 Megapixel Rear Camera | 2 Megapixel Front camera
Memory – RAM- 4GB LPDDR3 | ROM- 128GB with TF card slot up to 128GB
Display – Screen size 10.1 inches IPS Screen (2560 x 1600), 10-Point Touch Screen
Battery – Non-Removable 7500mAh Lithium-Polymer with 100-240V 5V 2.5A AC Adapter
SIM Card – Dual Hybrid Nano SIM
Sensors – Light, Accelerometer, Fingerprint
Color – Silver
Operating System – Android 8.0 Oreo OS
Dimensions – 240 mm x 170 mm x 10 mm
Weight – Grams (With Battery)
Port – 1 x Type Cv2.0 USB Port, 3.5 mm headphone jack, SD (TF) card expansion, Power Off/On, Speaker
More Features – Plastic and Aluminium Alloy Body, Dual Speakers, Bluetooth, LTE Cat 6, HSPA+, EV-DO Rev.A, Dual GPS, Wi-Fi, Capacitive IPS Display, Dual Camera, TF Slot, Quick Charging, Sweet Sound Dual Bottom Speaker, MIC, Type-C USB, Earphone Jack, Eye Care Mode, Reading Mode.
heres the firmware for the teclast tablets
https://docs.google.com/spreadsheet...ciediKQ3-_NW6zAda9xTNdbyqE/edit#gid=794945847
heres the option for installing android 9 or 10 on the m30...however I'm told it ONLY works on the M4P7 model
https://github.com/phhusson/treble_experimentations/wiki/Teclast-M30
heres a post about MTK chipset devices and a program to read information from them
https://4pda.ru/forum/index.php?showtopic=813767&st=0#Spoil-60035994-23
heres a video on how to use it
https://www.youtube.com/watch?v=pj4iFakq33M
if anyone needs SP FLASH TOOLS
https://spflashtools.com/windows/sp-flash-tool-v5-2020
Well, glad to see that this brand isn't dead.
Would you please " EXTRACT THE FIRMWARE ON THE M30". Thanks
KimLe: could you link a howto that describes the firmware extraction process under Linux? Of course I googled for it but I can't find straightforward information on this.
Is there twrp for this device
([emoji3590]09-09-18[emoji3590])
PoochyX said:
Is there twrp for this device
([emoji3590]09-09-18[emoji3590])
Click to expand...
Click to collapse
Not yet.
XX7u said:
KimLe: could you link a howto that describes the firmware extraction process under Linux? Of course I googled for it but I can't find straightforward information on this.
Click to expand...
Click to collapse
You should ask TechGuru123.
https://pan.baidu.com/s/1UPd0JVu1HRKnvQccWpbREw
heres the current firmware
if you want to get firmwares in the future
go here
http://www.teclast.com/tools/pad/pad.php?t=p and enter M4P7 for the device ID
password for baidu as of the time of this post is "jotg"
This Baidu link is dead.
Who's got a working download link for this Teclast M30 stock firmware.
:good:
I managed to get the firmware/rar package from BAIDU if anyone wants it
https://gofile.io/?c=yZyPnD
anyone working on this?
I manage to root it by extract Boot.img , use MaGisk manager to create Magisk_patched.img and flash it with SP-Flash-tools.
m30
KimLe said:
I manage to root it by extract Boot.img , use MaGisk manager to create Magisk_patched.img and flash it with SP-Flash-tools.
Click to expand...
Click to collapse
post it up for people:highfive:
TechGuru123 said:
post it up for people:highfive:
Click to expand...
Click to collapse
I sold my tablet so I can't take any picture.
But you can follow the instructions here.
https://community.umidigi.com/forum.php?mod=viewthread&tid=17376
The firmware version from Baidu is 1.02, but the tablet has 1.03. Is it safe to flash Magisk_patched.img from 1.02 firmware to the 1.03 tablet?
gray1919 said:
The firmware version from Baidu is 1.02, but the tablet has 1.03. Is it safe to flash Magisk_patched.img from 1.02 firmware to the 1.03 tablet?
Click to expand...
Click to collapse
Yeah you should be alright.... I patched Kernals from one baseband to another baseband
([emoji3590]09-09-18[emoji3590])
zappa55 has made a rooted boot.img for anyone who wants it
https://gofile.io/?c=ggUvb1
TechGuru123 said:
zappa55 has made a rooted boot.img for anyone who wants it
https://gofile.io/?c=ggUvb1
Click to expand...
Click to collapse
So, I can flash this directly with SPFlash tool right or any other way? Have u tried?
But, how can I get a scatter file for SPFlash tool?
Reykawick said:
But, how can I get a scatter file for SPFlash tool?
Click to expand...
Click to collapse
Scatter file you can get in the firmware from the first page. But I'm not sure enough if it can be used in case the firmware versions are different.
gray1919 said:
Scatter file you can get in the firmware from the first page. But I'm not sure enough if it can be used in case the firmware versions are different.
Click to expand...
Click to collapse
It's OK to use the scatter file from firmware v1.02.
Works perfectly. After you have installed the new, patched boot.img - just restart the tablet and then install Magisk Manager apk.
Your device is now rooted