Help me find the firmware with a working touchscreen on a Chinese NoName tablet:
Characteristics:
CPU: ALLWINNER TECH A33 QUAD CORE J8276BA 69M21
RAM: 1 gb
Flash: 8 gb
Touchscreen model DDQ8-A1
Touchscreen processing chip CST21680
The only workable firmware that I found (wifi, bluetooth, I did not test the rest):
h t t p s : / / yadi. sk/d /3 x m-l D 54 c6v puQ
But the touchscreen does not work in it.
On the advice from the Internet, it’s useful to look at the loop number, but there is nothing on it.
In Windows 7 Explorer, it was defined as: q9ledmtp, Google did not give anything.
From what I remember on a working factory firmware, the build date was 2018.
On the motherboard number: TJ-Q82_V51_20181227.
On the SD card slot sticker with: 312001 Q82B3_V51 512/8 / HRF
P.s. all firmware from https: / / cloud. mail. ru / public / e 4a0 1c0091 ae/All win ner%20 A33 not worked.
Outwardly similar to q88.
Sorry, this text transleted.
Related
Hi There
I'm fairly new to this android stuff but starting to get my head round some of it, I have a Natpc x210 also known as Kingpad Flytouch 9 I have managed to root it but now there are some things I would like to do
First I would like to back up my original firmware and from what I have read I need to use clockwork but I get an error message when I try and install this saying it isn't compatible with my tablet so does anyone know how I can do a backup of my original firmware (rom).
I would also like to edit the build prop to try and cure the incompatibility of some of the game on Google market, would it be possible for someone to tell me what exactly to edit in the build prop, I have heard of people putting there tablets into a loop and almost bricking them so I want to be sure what I'm doing.
And I would also like to know if there are any custom Roms I could try on this tablet.
Below is the spec
CPU : Rockchip Dual Core (2 x 1.5GHz)
Graphics Processor : 4 x Mali 400 MHz
Touchscreen : 1024 x 600 10-point touch 10.1" CAPACITIVE;
Operating System : Android 4.1.1 JELLY BEAN
Memory : 1GB DDR III / 16GB NAND Flash - upgradeable by Micro SD memory card (max 32GB)
WiFi : 802.11 b/g/n
Connectivity : 1 x Micro SD slot, 1 x AC Jack, 1 x 3.5mm Earphone Jack, 2 x MINI Size USB, 1 x mini HDMI out
Camera : 0.3mp Front facing / 2.0mp rear facing
Android Market / Google Play Store : YES
G Sensor : YES
Dimensions : 253 x 167 x 13mm
Weight :480g
Cheers
Fermec
Hi fermec i don't have any answers for you but wondering if you cold help me i have the same device as you and am trying to root it. Could you post the method you used.,especaly how to get usb driver, thanks
I came across this post for rooting Rockchip 3066 tablets.
How to Root Teclast A10 Dual-core
The tool is all in Chinese but you don't need to read whats happening anyway. The tablet reboots itself twice. After the first reboot I had to hard reset.
These are the steps.
Install app on Windows (7Pro x64)
turn developer mode on device (Sumvision Cyclone Titan 9.7", Rockchip 3066, Mali400, Android 4.0.4)
plug the device in and wait for the tool to recognize it
click the button next to the only english word on the app 'ROOT'
wait a minute or two and the device reboots
i had to hard reset here
turn on device again
after a minute the tablet rebooted
walla, Rooted rockchip 3066 device.
link for Root Tool
http://www.multiupload.nl/5L8T1YRAC6
I have managed to root my tablet (natpc x210) using this method but this is the way had to do it, to get my laptop win xp 32bit to see the tablet i had to install ADB Driver this is a setup file then I attached the laptop put the tablet in usb debug mode, then I started the software and it automatically sees the tablet, then just click root wait for it to finish and that is it rooted,
Worked a treat for me
Fermec
Thanks for reply and links, did all of that wasn't sure about ABD thing so i used morobo ,now my tablet says it's rooted according to a few apps that check for root but the apps i want eg titanium rb sync wont install any thoughts ?. Thanks again for your help
Maybe you need to install busybox to make them run properly?
flytouch 9
omgomg said:
Maybe you need to install busybox to make them run properly?
Click to expand...
Click to collapse
I use this metod ,stuff24.de/blog/howto-root-minix-neo-x5-g4-rk3066/
use update 1 ,and install supersu.
Working good For flytouch 9
Is there a custom rom avalible for Natpc x210 also known as Kingpad Flytouch 9
Hello;
My brother tries to root this mobile and end up with Eastcom logo. Is there any way to resist or flash it? I know little about flashing, I flashed my Ainol Novo 7 Legend, but I cannot flash Eastcom dx2618. I don’t know where to get tool and firmware for it. I search on google, but cannot find anything about flashing or recovery or reset. Please help :crying:.
View attachment 2465551
Brand: Eastcom
Eastcom Model: dx2618
Network type: GSM
The main screen size: 4.0 inches
Operating system: ANDROID
Touch screen: Capacitive touch screen
CPU: MTK6515, 1 GHz
RAM memory to run: 256MB
Body memory ROM: 256MB
Keyboard Type: Virtual touch-screen keyboard
Camera Type: Dual cameras (front and rear)
Network mode: Dual card single-mode
Problem Solved
I download my mobile rom from chines site bbs.eastsea
and one thing, how to remove that post since i have solved my problem.
Happy new year, in the first place!
I thought after reading and reading on inet...Gone try here to get a little bit further with a simple but brand new tablet i got from my mother.
That's also the reason why i don't throw it away, i thought lets see if there is a possibility to make it run better then with the stockrom.
And if there is no solution to flash it, what is the best way to backup the rockchip 3168 with 4.2.2 rom off the tablet itself?
Also to try other roms, i don't wane lose my bootloader etc.
Its a simple tablet, i know..But that's also why, i know it can run much better, especially if the ram is not eaten up too much.
I will put the specs down here:
- System info droid -
Summery :
Brand name: Empire Electronix (Manufacture :Rockchip)
Device : Rockchip M1002B
Android :4.2.2
Processor : RK30board-ARMv7 Processor rev 0 (v7l)
Cpu Max Freq : 1200 Mhz
Cores : 2
System Ram : 1.00GB (Some apps say 1500mb)
Audio Chipset : Rk30sdk
Internal Storage : 1008Mb(132 mb free)
Internal SD : 8gb
GPU : Imagination Technologies PowerVR SGX 540
Display Size : 10.1inch - 1024x600Resolution
Screen Density : 90 ppi (160dpi)
Refresh Rate : 82.34 Hz
Back Camera : 1.9 MP(some apps : 2Mp)
Front Camera : 0.3 Mp
System :
Model : M1002B
Manufacture : Rockchip
Android : 4.2.2
Api Level : 17
Kernel : 3.0.36+20131118....
Compilation : V1.01.JDQ39...
Processor :
Processor : Rk30board
Instructions sets : armeabi-v7a, armeabi
Max Freq : 1200Mhz
Gpu :
Model : PowerVr SGX 540 + Output (Mini Hdmi 1920x1080)
Vendor : ITechnologies
OpenGL Version : OpenGL ES 2.0
Advanced Info:
Viewport size : 2048 x 2048
Sensor :
Freescale Semiconductor
Power C : 0.2mA
Max Range : 39.24
Resolution : 0.15328126
Other chips plus board descriptions :
RK30Board
Rockchip616
S-ilead GSL3680
uP6636Q-PGK38L
Wifi lost number of the chip, was realtek with tv in it.Must make new picture to find out but seemed pretty standard wifi Bgn chip.
Buttons : 3 - Power-Volume up/down
Ports : Mini USB2 OTG - Mini Hdmi(DD-DD5.1) - HeadphoneJack - Mic - MiniSD Card slot-
Rooted.
Its a new tablet, but the hardware is older and because of that i thought lets see if i can get it maybe a little bit upgraded on the software side.
And if not, maybe another solution.
Therefore i searched a lot, but has anyone....Anyone maybe a direction to look for a maybe better rom.Also with cwm there is nothing what works with this chip, everything based on the maligpu400 or maybe also with the powerVr Sgx 540?
Other solution would be to backup the rom, and clean afterwards the stock rom.But i got stuck in how and what is the best way to do that.
I cant install Cwm recovery, when it installs it doesn't continue.
I also read that people lost their original bootloader, and because i cant find the stockrom online...What would be the best way to do that, i saw the app mtk, and the Rockchip tool but that seemed a lot off work and if i mess up my backup would never work.
Or is it the only way to back up this rom from Rockchip, a full backup kerel, loader etc..
And to try out a rom, install from sd card, and to get back on the stockrom a factory reset is all, or mess i up the recovery installing another rom?
If more info is needed about the chips, let me know.
Thanks ahead!:good:
Roberto.
i need this firmware .img , i have tablet genesis gt7320 with rk3168 tv , you can send firmware of you tablet ?
Hi everyone.
I bought this receiver last month and I have a problem with external modem – unit descriptions below:
Brand Name: ROADRISION
Display Size: 7"
TF/Micro SD Slot: 2
ROM: 32G
Model Name: RRA7844A
RAM: 4G
Operating System: Android 8.0
Screen: 1024*600 Capacitive touch screen
CPU: Coretex A53 Octa core px5
I can't connect any modem. I don't want use connection thru WI-FI from my phone - if radio have wi-fi cable to connect modem I want to use it.
Does anyone have this receiver and maybe knows how to connect modem?
Maybe someone can help me to root this radio or can tell me did I can downgrade to android 6.0.1 - but I can't find ROM for this model.
maybe anyone knows how to get into recovery mode?
I took some Pictures of radio and system info:
https : //pl. pinterest. com / bik0408 / roadrision /
For any feedback. THX
Hello! I have a colorfly g708 tablet with MT6592 processer. Discription of the device is here.
[$65.10] Colorfly G708 Tablet PC 8GB
Features 1. MTK6592 Octa Core Cortex-A7 1.4GHz CPU 2. Android 4.4 operating system 3. Support Bluetooth, WiFi, GPS, single micro SIM, GSM & WCDMA 4. 7.0 inch IPS multi-point capacitive touch screen 5. Integrated Bluetooth V4.0 for wireless data transmission 6. 1280*800 screen...
www.sunsky-online.com
Can anybody upload valid twrp recovery for this device.
I have checked this site(https://4pda.ru/forum/index.php?showtopic=644132&st=80#entry38351916) But it is showing file not found error.
It would be of great help if you find the recovery file.
Thankyou in advance.