Database Info

Help with Natpc x210 also known as Kingpad Flytouch 9

Hi There
I'm fairly new to this android stuff but starting to get my head round some of it, I have a Natpc x210 also known as Kingpad Flytouch 9 I have managed to root it but now there are some things I would like to do
First I would like to back up my original firmware and from what I have read I need to use clockwork but I get an error message when I try and install this saying it isn't compatible with my tablet so does anyone know how I can do a backup of my original firmware (rom).
I would also like to edit the build prop to try and cure the incompatibility of some of the game on Google market, would it be possible for someone to tell me what exactly to edit in the build prop, I have heard of people putting there tablets into a loop and almost bricking them so I want to be sure what I'm doing.
And I would also like to know if there are any custom Roms I could try on this tablet.
Below is the spec
CPU : Rockchip Dual Core (2 x 1.5GHz)
Graphics Processor : 4 x Mali 400 MHz
Touchscreen : 1024 x 600 10-point touch 10.1" CAPACITIVE;
Operating System : Android 4.1.1 JELLY BEAN
Memory : 1GB DDR III / 16GB NAND Flash - upgradeable by Micro SD memory card (max 32GB)
WiFi : 802.11 b/g/n
Connectivity : 1 x Micro SD slot, 1 x AC Jack, 1 x 3.5mm Earphone Jack, 2 x MINI Size USB, 1 x mini HDMI out
Camera : 0.3mp Front facing / 2.0mp rear facing
Android Market / Google Play Store : YES
G Sensor : YES
Dimensions : 253 x 167 x 13mm
Weight :480g
Cheers
Fermec

Hi fermec i don't have any answers for you but wondering if you cold help me i have the same device as you and am trying to root it. Could you post the method you used.,especaly how to get usb driver, thanks

I came across this post for rooting Rockchip 3066 tablets.
How to Root Teclast A10 Dual-core
The tool is all in Chinese but you don't need to read whats happening anyway. The tablet reboots itself twice. After the first reboot I had to hard reset.
These are the steps.
Install app on Windows (7Pro x64)
turn developer mode on device (Sumvision Cyclone Titan 9.7", Rockchip 3066, Mali400, Android 4.0.4)
plug the device in and wait for the tool to recognize it
click the button next to the only english word on the app 'ROOT'
wait a minute or two and the device reboots
i had to hard reset here
turn on device again
after a minute the tablet rebooted
walla, Rooted rockchip 3066 device.
link for Root Tool
http://www.multiupload.nl/5L8T1YRAC6
I have managed to root my tablet (natpc x210) using this method but this is the way had to do it, to get my laptop win xp 32bit to see the tablet i had to install ADB Driver this is a setup file then I attached the laptop put the tablet in usb debug mode, then I started the software and it automatically sees the tablet, then just click root wait for it to finish and that is it rooted,
Worked a treat for me
Fermec

Thanks for reply and links, did all of that wasn't sure about ABD thing so i used morobo ,now my tablet says it's rooted according to a few apps that check for root but the apps i want eg titanium rb sync wont install any thoughts ?. Thanks again for your help

Maybe you need to install busybox to make them run properly?

flytouch 9
omgomg said:
Maybe you need to install busybox to make them run properly?
Click to expand...
Click to collapse
I use this metod ,stuff24.de/blog/howto-root-minix-neo-x5-g4-rk3066/
use update 1 ,and install supersu.
Working good For flytouch 9

Is there a custom rom avalible for Natpc x210 also known as Kingpad Flytouch 9

[Q] Allwinner a10

Hello i have allwinner 10 tablet
Basic Info.
Model NO.: N500
Screen Type: Capacitive Screen
Operating System: Android
Screen Size: ≥10.1"
Webcam: Webcam
Memory: 512MB
Built-in Microphone: Built-in Microphone
Network Mode: WiFi
Built-in Bluetooth: Without Bluetooth
CPU Core: Single-Core
Card Reader: Card Reader
Fingerprint: Without Fingerprint
Hard Disk Capacity: ≤8G
CPU Type: Boxchip
Frequency: 1.5GHz
Which has stuck on boot screen, so i tried to flash firmware. Now it's jus backlight coming on. Tried about ~30 roms allready but no luck. Can someone point me in what todo ? Or can someone send me original firmware becouse i can't find. Thank you for your time.

Have you tried CM10 ROMs by Christian Troy. They are generic so they should boot on any Allwinner a10. i own ICOO D70W works for me.
here is the link
http://forum.xda-developers.com/showthread.php?t=1821398

prratha93 said:
Have you tried CM10 ROMs by Christian Troy. They are generic so they should boot on any Allwinner a10. i own ICOO D70W works for me.
here is the link
http://forum.xda-developers.com/showthread.php?t=1821398
Click to expand...
Click to collapse
Don't know how to deal with them. Installed adodb drivers and now I can see that tablet is running just nothing shows on the screen.

mister_junior said:
Don't know how to deal with them. Installed adodb drivers and now I can see that tablet is running just nothing shows on the screen.
Click to expand...
Click to collapse
Apk installer shows that tablet is running and i can get view of tablet, but what i see is only backlight. What shoud i do to unlock the screen ?

Revive my dead china clone with RK3188 (rockchip-rk31sdk-WAWJMDN1KN)

Hi,
I'm badly need some help to revive my (rockchip-rk31sdk-WAWJMDN1KN).
Perhaps someone will give me idea to allocate proper parameter for recovery , kernel , boot , etc...
Usual location for tablet RK3188 Cortex A9 Quad core 1.6 ghz Governor interactive, Kernel 3.0.36+ ,Board hardware RK30Board/ 0000, Android 4.2.2 ;eng.root 20130912.185132 sdk 17, Display 1280x800; dpi;160 size 9.4'
GPU:Mali-400MP, RAM: 2048 Flash:32 gb Build in:16gb actual, wifi, usb, Bluetooth gps= all yes, camer 5MP additional 1.9MP
I decide to go ahead and try some custom rom using RKAndroidTool did not realize that by cleaning IDB I will low level format..
Before doing that I did save few pictures and run log via "android studio" also I backup whole unit via CWM hoping I will always have access to recovery.Unfortunately that not the case.The good think I still have access to RKAndroidTool( the tool is recognizing my device).
I can post link to my CWM backup if may help.
Inside that CWM backup is kernel.bin, system.bin recovery bin all large sizes files (complete CWM of my last working tablet rk3188). Maybe someone be able to advice how to make proper files to revive my system from that backup I have or help me some how to get recovery working so I can use my CWM backup or any other way to make this tab back to life again..
Many thanks for your kindness and time.
Have nice day
Adam

UPDATE ___
RK3188 adb is running no screen__help PLEASE
After erasing IDB in my unknown china tablet and loosing my whole system I was able to load different custom firmware from Chuwi v88 + different kernel and my Tab popup in windows showing 2 extra drives F and G.I did open android studio and notice access to adb and all activity in my android.The RKandroidTool also recognizing my tab.
No reaction to power button only automatically connecting to my comp ( black screen on my tab).
I have original CWM backup of my device.
Can someone advise me how to access recovery from this point or find the way to completely start my tablet.Maybe is possible to recover CWM from adb?I will need some help to use a proper commands perhaps in adb.

[Q] Please link for ZTE K3DX-V5G firmware.

Please link for ZTE K3DX-V5G firmware.

ZTE K3DX-V5G firmware
Why do you need ZTE K3DX-V5G firmware?
Is there something wrong with your device?
Do you recommend buying the ZTE K3DX-V5G?
The brand name is V5 or ZTE or Guan or Mango.
It is the same device, manufatured by V5 and sold by ZTE, Guan and Mango.
Guan K3DX-V5G
https://deviceatlas.com/device-data/devices/guan/k3dx-v5g/28213760
BangGearWatch | ZTE V5G-K3DX
https://www.banggearwatch.com/pricetracker/zte-v5g-k3dx-5-5-inch-3gb-1369255/
The price was €64 at BangGood, for a short time.
The price was €70 at MyeFOX.
V5 K3DX-V5G 3GB RAM 32GB ROM Qualcomm Snapdragon 617 1.5GHz Octa Core FHD Display 5.5 inches Android 5.1 4G LTE Smartphone
https://www.myefox.fr/telephones/v5...a-core-fhd-ecran-55-pouces-android-5-g-223880
K3DX-V5G supports naked-eye 3D and eye-tracking.
It has a K3DX display with column interlaced mode.
Therefore is fully compatible with PhereoRol3D app.
https://github.com/JackDesBwa/PhereoRoll3D
Get the latest release here
https://github.com/JackDesBwa/PhereoRoll3D/releases
Have you tried PhereoRol3D ?

BootStomp and DR.CHECKER
Your phone has a locked bootloader.
You need to run these two tools: DR.CHECKER and BootStomp.
DR.CHECKER : A Soundy Vulnerability Detection Tool for Linux Kernel Drivers.
It is a single script!
This repo contains all the sources, including setup scripts. Now with an Amazing UI to view the warnings along with corresponding source files.
https://github.com/ucsb-seclab/dr_checker
BootStomp
https://seclab.cs.ucsb.edu/academic/publishing/#bootstomp-security-bootloaders-mobile-devices-2017
Did you manage to root ZTE K3DX-V5G ?

Partitions table
Get an excellent partitions table of ZTE K3DX-V5G
This format is ideal for recovery.
Device Info HW
https://play.google.com/store/apps/details?id=ru.andr7e.deviceinfohw&hl=en_US
NOTE - Find attached the partitions table of SuperD D1 (SuperD C1001). It is another device with Naked-eye 3D and eye-tracking.

Do you own a ZTE K3DX-V5G ?
You do not own a ZTE K3DX-V5G, do you?
V5 K3DX V5G Smartphone Unboxing (3D Video Camera)
https://www.youtube.com/watch?v=KkQhQszdSYs
Mango K3DX-V5G
https://v.youku.com/v_show/id_XMjgxMDI4OTcyOA==.html
3D Dongdong APP: Over 10,000 3D movies provided
http://en.k3dx.com/prolist/7/17.html

Thank you for many information about it.
I did not own it now due to it heat up too much compare with SD 625 / 636 phone.

Discussion V5 K3DX-V5G at russian 4pda forum
Discussion V5 K3DX-V5G
http://4pda.ru/forum/index.php?showtopic=944204
There is new firmware available from chinese versions (latest 1.3)
Firmware in China
http://www.shuajibao.com/rom/Zte/23777
Version 1.3 is not official. It is a custom ROM by this russian guy... Sidorovvitalik.
But development has already stopped because he is selling his ZTE V5 K3DX-V5G.

K3DX V5G stockrom
Please can someone upload the stockrom.

After scouring the internet for hours, I stumbled upon this post:
https://4pda.ru/forum/index.php?showtopic=944204&st=220
And guess what, I found the firmware for the device! Eventually, I was able to fix my bricked K3DX V5G, and here it is:
https://yadi.sk/d/TSjrTYbKBV4KWA
What I did was:
1. Decompressing the file
2. Flashing it with fastboot
3. Device resurrected!
Fastboot commands:
Code:
fastboot flash:raw boot boot.img
fastboot flash system system.img
edit: found out that it is a clone of ZTE v5 pro N940SC

Ma'am/Sir. Can i ask what usb driver did you use to detect your k3dx-v5g? Because mine is not detecting. Thanks in advance.

Ma'am/Sir. Can i ask what usb driver did you use to detect your k3dx-v5g? Because mine is not detecting. Thanks in advance.

asce16 said:
Ma'am/Sir. Can i ask what usb driver did you use to detect your k3dx-v5g? Because mine is not detecting. Thanks in advance.
Click to expand...
Click to collapse
Are you on Linux or Windows?

Ma'am/Sir. What usb driver did you use to detect your k3dx v5g phone? I cant find compatible to mine, my pc cant detect my k3dx v5g phone. Plsss. Send link. Thanks in advance.

B83C said:
Are you on Linux or Windows?
Click to expand...
Click to collapse
Window.

B83C said:
Are you on Linux or Windows?
Click to expand...
Click to collapse
Also ma'am/sir. can i ask a little favor? Can you send me full guide how to flash this file. Plssss

asce16 said:
Also ma'am/sir. can i ask a little favor? Can you send me full guide how to flash this file. Plssss
Click to expand...
Click to collapse
Hmm well, have u tried peeking at the device manager when you phone is connected to your PC in fastboot mode?
If there's an entry showing your device you will need grab a fastboot binary to flash the firmware.
Here's a link to the tool called minimal ADB and Fastboot: here
You will also need to extract the firmware to somewhere in your drive.
Having done all the extraction and installation,
and since you're on Windows, you should do:
Bash:
\path\to\fastboot flash:raw boot \path\to\boot.img
\path\to\fastboot flash system \path\to\system.img
where \path\to\fastboot points to the path where you have extracted/installed the tool (or if you have added its path to the PATH environment variable, you can avoid the hassle to write the full path), and \path\to\boot.img and system.img points to absolute path of the extracted firmware.
Then, you are good to go!

B83C said:
Hmm well, have u tried peeking at the device manager when you phone is connected to your PC in fastboot mode?
If there's an entry showing your device you will need grab a fastboot binary to flash the firmware.
Here's a link to the tool called minimal ADB and Fastboot: here
You will also need to extract the firmware to somewhere in your drive.
Having done all the extraction and installation,
and since you're on Windows, you should do:
Bash:
\path\to\fastboot flash:raw boot \path\to\boot.img
\path\to\fastboot flash system \path\to\system.img
where \path\to\fastboot points to the path where you have extracted/installed the tool (or if you have added its path to the PATH environment variable, you can avoid the hassle to write the full path), and \path\to\boot.img and system.img points to absolute path of the extracted firmware.
Then, you are good to go!
Click to expand...
Click to collapse
Ma'am/sir. Thanks, it's fix now. Thanks for the help. Godbless and stay safe.

Hello, in case you are looking for a twrp image for the device, here's one I have ported myself:
TWRP_N940Sc_V3
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com

B83C said:
Hello, in case you are looking for a twrp image for the device, here's one I have ported myself:
https://www.mediafire.com/file/0547s4g8hdojctq/TWRP_N940Sc_V3.img/fileTh
Click to expand...
Click to collapse
Thankyou! Uhm is there any custom rom? Can you please port a custom rom or upload please i really need it[/url]

John072021 said:
Thankyou! Uhm is there any custom rom? Can you please port a custom rom or upload please i really need it[/url]
Click to expand...
Click to collapse
I regret to tell you that, no. Currently I have been using the phone as a debian server, since the LCD has been inadvertently broken ( I exerted too much force on it ). Moreover, the device doesn't recognize its battery, which suggests that I might have broken some part of it. Therefore, I have kinda lost any hopes for it. Plus, my linux machine is not powerful enough to build an android OS ( what do you expect much from an intel celeron? ).
PS: I might do it once I get my hands on a much powerful one, or maybe a powerful enough VPS? I am not quite sure but currently I am still in high school, meaning that I may or may not have time....
Best regards,
B83C

Original firmware for an Allwinner H3 TV Box with SV6256P WiFi chip?

I've been searching for days now. I can't seem to find any compatible firmware. The TV Box was marketed to have Android 10.1, 4GB of RAM, 64GB of ROM. False specs tho. The TV Box only ran rooted Android 7.1 and has 16GB of internal storage. Not sure for the RAM, AIDA64 reported 4GB last time I checked. For my use case, I'm fine with that specs. However, after performing a factory reset on it via settings, I can't seem to boot the device anymore. The TV Box is MXQ Pro 4K 5G. It is now stuck on the MBOX boot animation. I've seen firmware online, but not specific to my model. I've seen firmware for the 2.4ghz wifi model only. I've also seen firmware for the 2.4/5ghz model, but for amlogic/rockchip devices and not for Allwinner. I've taken the TV box apart and look for potentially useful information.
Board label: Q44_v4.0_20200602
WiFi: SV6256P TAC2028 13Y11B
RAM: D9PSC (4 chips)
(?): PPT 2016 O PM4 4-11BP
(?): QL 2029
If there's a compatible firmware for this aside from Android, please let me know as well. Thank you!

hi
you must know the chip processor and graphic
may be
H616 processor with mali G31 or an other
H6 processor with mali ...

ch... said:
hi
you must know the chip processor and graphic
may be
H616 processor with mali G31 or an other
H6 processor with mali ...
Click to expand...
Click to collapse
it's in the title

ch... said:
hi
you must know the chip processor and graphic
may be
H616 processor with mali G31 or an other
H6 processor with mali ...
Click to expand...
Click to collapse
H3 with Mali-400

UPDATE:
Sunvell R69 firmware seems to work but with WiFi, RAM, and storage config issue. WiFi does not work as the firmware is not made specifically for the SV6256P WiFi chip. 1GB of RAM and 8GB of ROM only shows up in AIDA64, which by the way is the default configuration for the Sunvell R69. I've checked the board and it has 4 pcs of D9PSC chips, which I believe are 512MB RAM modules. 2GB of RAM should show up. The board also has the KLMAG1JETD-B041 chip, an 16GB eMMC module for ROM. The device boots rooted Android 7.1.2 just fine. I suppose the issue could be solved by tinkering some system files? I just don't know how just yet.
I've seen a newer version of the Sunvell R69 online, which is the Sunvell H3. It has 2GB of RAM and 16GB of ROM. The WiFi chip isn't still a match however. Despite the WiFi issue, I'm still willing to install the firmware. Better to have 2/16GB than 1/GB only. I can't seem to find any working links for a firmware download however and all my searches so far leads to a dead Google Drive link.
Ive found firmware for MXQ 4K 5G with SV6256P, but for Rockchip only. Is it possible to extract the WiFi drivers from that and load it to my rooted TV box? If so, how could I go about it?
Sunvell R69 firmware (see larrywilson's reply)
https:// forum.freaktab. com /forum/tv-player-support/allwinner-tv-players/809586-i-need-rom-for-mxq-pro-4k
MXQ 4K 5G with SV6256P (for Rockchip)
https:// youtu. be/q7eFpK1R-kg

I have same problem... Problem is solved by backup original rom from working box.
Steps that i made is:
-Flash box with this firmware using phoenix suite:
h t t p s:// mega. nz/#!I9oFBISb!8ozfiBuxs7W_pOtr-XnvAzZ_S9xI9GR2Db55AA-03P0
Box boot, but with not working wifi.
-Go and activate developer options and enable usb debugging.Check USB0 device mode enable
-Copy twrp.zip (from archive in link bellow) to flash drive
-Connect phoenix suite to box and press recovery.Box will boot into recovery mode
-Press install update from external and choose twrp.zip (executable only) DO NOT TRY to install, just run it!
-Make full backup of "no-wifi" rom (check all boxes) and save it to external flash drive
-When is done, disconnect flash drive from box and connect to pc. Replace only files ( from backup in link bellow ) to folder in flash drive. DO NOT rename folder!
-Boot box to "no-wifi" rom and connect to phoenix suite, press recovery again.
- From stock recovery load twrp.zip again, point where backup is, mark again all boxes, and choose restore.
- Wait to finish and press reboot when is done. Box will boot to stock firmware with working wi-fi ...
Link to backup with all needed files:
h t t p s:// mega. nz/file/1kd0ATRR#IDU0a8gkdSKsM-Dlh7yE7Z9GT1IsVLje8BBGx4uidvw
Good luck to all!

Here you go I think this will work for you
[ROM][OFFICIAL][7.1] Allwinner Tech H3 MXQ PRO 4K 5G STOCK ROM
MXQ PRO 4K 5G OFFICIAL STOCK FIRMWARE (ROOTED) If you have an MXQ PRO 4K 5G that it's bricked or a firmware that doesn't support your current WiFi module then this is for you SPECS WITH THE BOX THAT I TESTED: CPU: Allwinner Tech H3 @1.1Ghz RAM...
forum.xda-developers.com

Klein61967 said:
Here you go I think this will work for you
[ROM][OFFICIAL][7.1] Allwinner Tech H3 MXQ PRO 4K 5G STOCK ROM
MXQ PRO 4K 5G OFFICIAL STOCK FIRMWARE (ROOTED) If you have an MXQ PRO 4K 5G that it's bricked or a firmware that doesn't support your current WiFi module then this is for you SPECS WITH THE BOX THAT I TESTED: CPU: Allwinner Tech H3 @1.1Ghz RAM...
forum.xda-developers.com
Click to expand...
Click to collapse
Where can I download this ROM

Klein61967 said:
Here you go I think this will work for you
[ROM][OFFICIAL][7.1] Allwinner Tech H3 MXQ PRO 4K 5G STOCK ROM
MXQ PRO 4K 5G OFFICIAL STOCK FIRMWARE (ROOTED) If you have an MXQ PRO 4K 5G that it's bricked or a firmware that doesn't support your current WiFi module then this is for you SPECS WITH THE BOX THAT I TESTED: CPU: Allwinner Tech H3 @1.1Ghz RAM...
forum.xda-developers.com
Click to expand...
Click to collapse
dead link

Не правильная ссылка

woooow123 said:
I have same problem... Problem is solved by backup original rom from working box.
Steps that i made is:
-Flash box with this firmware using phoenix suite:
h t t p s:// mega. nz/#!I9oFBISb!8ozfiBuxs7W_pOtr-XnvAzZ_S9xI9GR2Db55AA-03P0
Box boot, but with not working wifi.
-Go and activate developer options and enable usb debugging.Check USB0 device mode enable
-Copy twrp.zip (from archive in link bellow) to flash drive
-Connect phoenix suite to box and press recovery.Box will boot into recovery mode
-Press install update from external and choose twrp.zip (executable only) DO NOT TRY to install, just run it!
-Make full backup of "no-wifi" rom (check all boxes) and save it to external flash drive
-When is done, disconnect flash drive from box and connect to pc. Replace only files ( from backup in link bellow ) to folder in flash drive. DO NOT rename folder!
-Boot box to "no-wifi" rom and connect to phoenix suite, press recovery again.
- From stock recovery load twrp.zip again, point where backup is, mark again all boxes, and choose restore.
- Wait to finish and press reboot when is done. Box will boot to stock firmware with working wi-fi ...
Link to backup with all needed files:
h t t p s:// mega. nz/file/1kd0ATRR#IDU0a8gkdSKsM-Dlh7yE7Z9GT1IsVLje8BBGx4uidvw
Good luck to all!
Click to expand...
Click to collapse
thanks y for sharing .......

Yes.I need it.

[email protected] said:
Да. Мне это нужно.
Click to expand...
Click to collapse
https://forum.freaktab.com/node/809586?p=815709#post815709 This look

аnswer.

Here is clean rom, no bloatware, no gta skins! Full flashable image via phoenix suite! Tested on MXQ-PRO-5G with sv6256p wifi adapter! Board label: Q44_v4.0_20200602
MEGA

woooow123 said:
Here is clean rom, no bloatware, no gta skins! Full flashable image via phoenix suite! Tested on MXQ-PRO-5G with sv6256p wifi adapter! Board label: Q44_v4.0_20200602
MEGA
Click to expand...
Click to collapse
Thank you! This is the cleanest and the smoothest firmware I tried for this model. Board label Q44_V4.1_20220120. What still bugs me is the wrong Android version (9 when 7), and the fake storage and ram, but I'll stay with this one.

I will try to add sv6256p support in image from sunwell r69. This is the best image for allwinner h3!!!

i need me help
R69-8X4BIT DDR3_V1.0 firmware download
thanks

woooow123 said:
I will try to add sv6256p support in image from sunwell r69. This is the best image for allwinner h3!!!
Click to expand...
Click to collapse
I need help I would like to add a working firmware support for sv6256p for my device, because the firmware is for the ssv6051 chip