Database Info

Help with Natpc x210 also known as Kingpad Flytouch 9

Hi There
I'm fairly new to this android stuff but starting to get my head round some of it, I have a Natpc x210 also known as Kingpad Flytouch 9 I have managed to root it but now there are some things I would like to do
First I would like to back up my original firmware and from what I have read I need to use clockwork but I get an error message when I try and install this saying it isn't compatible with my tablet so does anyone know how I can do a backup of my original firmware (rom).
I would also like to edit the build prop to try and cure the incompatibility of some of the game on Google market, would it be possible for someone to tell me what exactly to edit in the build prop, I have heard of people putting there tablets into a loop and almost bricking them so I want to be sure what I'm doing.
And I would also like to know if there are any custom Roms I could try on this tablet.
Below is the spec
CPU : Rockchip Dual Core (2 x 1.5GHz)
Graphics Processor : 4 x Mali 400 MHz
Touchscreen : 1024 x 600 10-point touch 10.1" CAPACITIVE;
Operating System : Android 4.1.1 JELLY BEAN
Memory : 1GB DDR III / 16GB NAND Flash - upgradeable by Micro SD memory card (max 32GB)
WiFi : 802.11 b/g/n
Connectivity : 1 x Micro SD slot, 1 x AC Jack, 1 x 3.5mm Earphone Jack, 2 x MINI Size USB, 1 x mini HDMI out
Camera : 0.3mp Front facing / 2.0mp rear facing
Android Market / Google Play Store : YES
G Sensor : YES
Dimensions : 253 x 167 x 13mm
Weight :480g
Cheers
Fermec

Hi fermec i don't have any answers for you but wondering if you cold help me i have the same device as you and am trying to root it. Could you post the method you used.,especaly how to get usb driver, thanks

I came across this post for rooting Rockchip 3066 tablets.
How to Root Teclast A10 Dual-core
The tool is all in Chinese but you don't need to read whats happening anyway. The tablet reboots itself twice. After the first reboot I had to hard reset.
These are the steps.
Install app on Windows (7Pro x64)
turn developer mode on device (Sumvision Cyclone Titan 9.7", Rockchip 3066, Mali400, Android 4.0.4)
plug the device in and wait for the tool to recognize it
click the button next to the only english word on the app 'ROOT'
wait a minute or two and the device reboots
i had to hard reset here
turn on device again
after a minute the tablet rebooted
walla, Rooted rockchip 3066 device.
link for Root Tool
http://www.multiupload.nl/5L8T1YRAC6
I have managed to root my tablet (natpc x210) using this method but this is the way had to do it, to get my laptop win xp 32bit to see the tablet i had to install ADB Driver this is a setup file then I attached the laptop put the tablet in usb debug mode, then I started the software and it automatically sees the tablet, then just click root wait for it to finish and that is it rooted,
Worked a treat for me
Fermec

Thanks for reply and links, did all of that wasn't sure about ABD thing so i used morobo ,now my tablet says it's rooted according to a few apps that check for root but the apps i want eg titanium rb sync wont install any thoughts ?. Thanks again for your help

Maybe you need to install busybox to make them run properly?

flytouch 9
omgomg said:
Maybe you need to install busybox to make them run properly?
Click to expand...
Click to collapse
I use this metod ,stuff24.de/blog/howto-root-minix-neo-x5-g4-rk3066/
use update 1 ,and install supersu.
Working good For flytouch 9

Is there a custom rom avalible for Natpc x210 also known as Kingpad Flytouch 9

[Q] Allwinner a10

Hello i have allwinner 10 tablet
Basic Info.
Model NO.: N500
Screen Type: Capacitive Screen
Operating System: Android
Screen Size: ≥10.1"
Webcam: Webcam
Memory: 512MB
Built-in Microphone: Built-in Microphone
Network Mode: WiFi
Built-in Bluetooth: Without Bluetooth
CPU Core: Single-Core
Card Reader: Card Reader
Fingerprint: Without Fingerprint
Hard Disk Capacity: ≤8G
CPU Type: Boxchip
Frequency: 1.5GHz
Which has stuck on boot screen, so i tried to flash firmware. Now it's jus backlight coming on. Tried about ~30 roms allready but no luck. Can someone point me in what todo ? Or can someone send me original firmware becouse i can't find. Thank you for your time.

Have you tried CM10 ROMs by Christian Troy. They are generic so they should boot on any Allwinner a10. i own ICOO D70W works for me.
here is the link
http://forum.xda-developers.com/showthread.php?t=1821398

prratha93 said:
Have you tried CM10 ROMs by Christian Troy. They are generic so they should boot on any Allwinner a10. i own ICOO D70W works for me.
here is the link
http://forum.xda-developers.com/showthread.php?t=1821398
Click to expand...
Click to collapse
Don't know how to deal with them. Installed adodb drivers and now I can see that tablet is running just nothing shows on the screen.

mister_junior said:
Don't know how to deal with them. Installed adodb drivers and now I can see that tablet is running just nothing shows on the screen.
Click to expand...
Click to collapse
Apk installer shows that tablet is running and i can get view of tablet, but what i see is only backlight. What shoud i do to unlock the screen ?

[Q] Lenco Cooltab-72 Made in China Tablet - Firmware ?

Hello !
It's my first message on this forum... I don't write verry good in English... sorry
First, thank you to read my post
Where can I find a firmware (.img) for (compatible with) my device Lenco Cooltab-72 version 1.2 ?
The official Lenco support won't give me the original...
If someone have this device, it will be verry friendly to dump the stock room and upload it...
It's easy to dump the stock rom ! The files are direct nammed e.g. "system" in /dev/block/...
I have already system.img and boot.img but I haven't others...
But for flash it, I ask to a developper to help me...
With verry good luck, I succeded to flash a time with PhoenixSuit (bcs my tablet work on Allwinner A20 processor). The flash was a success but the screen of my tablet is white (sometimes grey or blue or black... view on afterflash.jpg)... The tablet boot on recovery and adb detect it but <adb shell> don't work... When I put "adb reboot bootloader", the tablet reboot normaly (no bootloader) and usb debugging is not active... I will test to buy a mini-HDMI to HDMI cable to connect my tablet to a external screen, is it a good idea ?
I tested to make a bootable sd card for allwinner tablets... but when I instert this one in the tablet, it don't boot
Caracteristics
WARNING ! IT'S MADE IN CHINA !
Tablet: Lenco Cooltab-72 version 1.2
Processor: Allwinner a20 1,20 Ghz 1,20Ghz (dual core)
Memory: I think 2Go (1go to system and 1Go to data and userdata)
Original Android version: Android Jelly Bean 4.2.2
And more on to view on pix (bottom)...
build.prop is also in the folder...
I have a dekstop computer with dual OS (Windows 7 and Ubuntu 14.xx -last-) (I'm actually on Ubuntu)... (don't detect sdhd cards but I can connect it with a other phone)
I also have a laptop sony vaio with windows 7 and intel core 1.3 cpu... (it detect sdhd cards)
And so a sdhd card of 8GB SanDisk class {4}
Pix:
Mega Folder link (add the http): mega.co.nz/#F!oI5RWbqD!7ciaCt4C7qmDTvHp-AC7Uw
The pix is captured together demounting
Thank you for have understood this message I'm french, sorry...
And thank you to help me,
Ioionutella

Hi, I also have a lenco cooltab-72. I have googled a lot about this tablet and also found zero to nothing about it. I would really need some help because recently my tablet stopped updating his RTC (clock). Also would like some roms if there are
P.S since this is a Allwiner A20 i have found this community: http://www.techknow.me/forum/index.php?board=170.0 (you need to register to see some hidden forums)

Thank's ! I didn't view this community but it should be good
I will keep you to date

ioionutella said:
... Where can I find a firmware (.img) for (compatible with) my device Lenco Cooltab-72 version 1.2 ?
Click to expand...
Click to collapse
Try NeedROM.
You have to get an exact match between the firmware and your hardware, and that site is generally very good for that.

Thank you Belamigo, but there isn't my tablet on this website

I succeded to flash a new rom with debug default enabled !
Now, adb work ! all is working well except the screen I see the same like the other...

ioionutella said:
I succeded to flash a new rom with debug default enabled !
Now, adb work ! all is working well except the screen I see the same like the other...
Click to expand...
Click to collapse
Where did you got that rom?

On techknow forum

ioionutella said:
Hello !
It's my first message on this forum... I don't write verry good in English... sorry
First, thank you to read my post
Where can I find a firmware (.img) for (compatible with) my device Lenco Cooltab-72 version 1.2 ?
The official Lenco support won't give me the original...
If someone have this device, it will be verry friendly to dump the stock room and upload it...
It's easy to dump the stock rom ! The files are direct nammed e.g. "system" in /dev/block/...
I have already system.img and boot.img but I haven't others...
But for flash it, I ask to a developper to help me...
With verry good luck, I succeded to flash a time with PhoenixSuit (bcs my tablet work on Allwinner A20 processor). The flash was a success but the screen of my tablet is white (sometimes grey or blue or black... view on afterflash.jpg)... The tablet boot on recovery and adb detect it but <adb shell> don't work... When I put "adb reboot bootloader", the tablet reboot normaly (no bootloader) and usb debugging is not active... I will test to buy a mini-HDMI to HDMI cable to connect my tablet to a external screen, is it a good idea ?
I tested to make a bootable sd card for allwinner tablets... but when I instert this one in the tablet, it don't boot
Caracteristics
WARNING ! IT'S MADE IN CHINA !
Tablet: Lenco Cooltab-72 version 1.2
Processor: Allwinner a20 1,20 Ghz 1,20Ghz (dual core)
Memory: I think 2Go (1go to system and 1Go to data and userdata)
Original Android version: Android Jelly Bean 4.2.2
And more on to view on pix (bottom)...
build.prop is also in the folder...
I have a dekstop computer with dual OS (Windows 7 and Ubuntu 14.xx -last-) (I'm actually on Ubuntu)... (don't detect sdhd cards but I can connect it with a other phone)
I also have a laptop sony vaio with windows 7 and intel core 1.3 cpu... (it detect sdhd cards)
And so a sdhd card of 8GB SanDisk class {4}
Pix:
Mega Folder link (add the http): mega.co.nz/#F!oI5RWbqD!7ciaCt4C7qmDTvHp-AC7Uw
The pix is captured together demounting
Thank you for have understood this message I'm french, sorry...
And thank you to help me,
Ioionutella
Click to expand...
Click to collapse
https://lencosupport.zendesk.com/forums/20467832-Firmware-GB-
https://lencosupport.zendesk.com/entries/26108701-Cooltab-72

26108701-Cooltab-72
marcars said:
lenco.eu/supportfiles/Firmware/Cooltab-72_Fixed_Skype.rar
Click to expand...
Click to collapse
for all who are searching like me

Lenco TAB-1035
marcars said:
https://lencosupport.zendesk.com/forums/20467832-Firmware-GB-
https://lencosupport.zendesk.com/entries/26108701-Cooltab-72
Click to expand...
Click to collapse
Hi mister. My tablet Lenco TAB-1035 does not work.I can not open an account.How then I download the firmware. Thank you.

[GUIDE][How-To][LP 5.1] Root and Custom Recovery for Alcatel OneTouch Flash 2 (7049D)

First of all I would like to share this method as I don't see it anywhere here (yet).
This method is not mine, nor anything is of my discovery
Alactel Flash 2 Specs (please let me know of any variation of this model)
5.0-Inch HD IPS Display (720 x 1280 Pixels, 294 ppi)
Android 5.1 Lollipop OS
MediaTek MT6753 Chipset
1.3GHz Octa Core 64-bit Cortex-A53 CPU
Mali-T720 MP2 GPU
2GB of RAM
13.0 Megapixel Autofocus Main Camera with Two-Tone LED Flash
5.0 Megapixel Front Camera with LED Flash
16GB Internal Storage
Expandable Up to 128GB via MicroSD
Dual SIM (Regular + Regular)
4G LTE, 3G HSPA+, 2G EDGE and GPRS Networks
Wi-Fi and Wi-Fi Hotspot
Bluetooth 4.0
GPS with A-GPS
FM Radio with RDS
USB OTG
MicroUSB 2.0
3.5mm Audio Jack
Magnetometer
Accelerometer
Proximity Sensor
Ambient Light Sensor
3,000mAh Li-ion Battery (Non-removable)
STEPS
Requirements:
- PC
- USB Cable
- Brain
- Little bit of common sense on flashing
Download Links:Mediatek VCOM Drivers:
- Link
SP Flash Tool:
- Link
Flash 2 TWRP & Scatter File:
- Link
ETA-SuperSU-v2.52.zip:
- SuperSU link
Instructions:
1. Download all necessary files.
2. Install MTK Drivers
3. Extract SPFlash tool anywhere on your PC and flash2_twrp.zip
4. Copy the BETA-SuperSU-v2.52.zip to your phone.
5. Open flash_tool.exe, click on the Download Tab
6. Click Scatter-loading and browse for the scatter file(included in the flash2_twrp.zip)
7. Make sure flashing mode is set to "Download Only" and check mark only on the Recovery.
8. Click Download.
9. Turn off your phone, connect your phone to the PC and wait for the flashing to commence.
10. Green Ring image will show once flashing is completed.
11. Important: Disconnect your phone from the computer, press and hold Vol Up + Power.
12. Boot menu will show, select Recovery.
From the custom recovery, before rooting, backup your rom first.
To root:
1. On the TWRP Recovery, click Install.
2. Select BETA-SuperSU-v2.52.zip.
3. Flash it, then you can reboot as it is.
4. Enjoy your rooted AF2.
All files and credits belongs to:
Mr. Long NT of AF2 FB Group

NOTE: members of af2 group states that this method is bugged and you will lose OTA.

Please verify if someone successful in rooting this method. thanks

yabadap said:
NOTE: members of af2 group states that this method is bugged and you will lose OTA.
Click to expand...
Click to collapse
That is why, before rooting, it is said to backup first, besides, there is already a stock rom that is flashable via recovery.
dweller417 said:
Please verify if someone successful in rooting this method. thanks
Click to expand...
Click to collapse
Worked for me, most error they encounter is SPFT not reading their devices, and others (first batch buyers) said that their OTA was gone, but this, I am not fully aware of what do they mean.

It's work, thank you very very much.

kitipon said:
It's work, thank you very very much.
Click to expand...
Click to collapse
You're welcome. Rooting shouldn't be a problem though. Having a flashable stock rom is, might be my case only. In the AF2 FB group a recovery flashable is already done, but a SPFT one isn't, yet.

Facing a bug, can you help? Please
yabadap said:
NOTE: members of af2 group states that this method is bugged and you will lose OTA.
Click to expand...
Click to collapse
Hi, after rooting using this method, I can't install any app, from playstore as well as offline apk installation, playstore shows "error code:-504." Any idea or solution? BTW, I rebooted several times, wiped data and cache of play store and Google service framework and removed then readded my Google ID as suggested by other forums. No result...

Can I get the link for the Facebook group you are talking about
Can I get the link for the Facebook group you are talking about?

ade.sultan said:
Can I get the link for the Facebook group you are talking about?
Click to expand...
Click to collapse
Alcatel Flash 2 PH.

So who has tried this guide? I'm planning to purchase a Flash Plus 2 (Is it the same device?)

Teclast M30 Tablet General Thread

Post here about this new (aug 2019) tablet....
I was finally able to get android 10 PHH installed on this tablet (model M4P7)..version 221
had to go through alot of crap to get it done...but finally works (and works good...so far)
if anyone wants a guide let me know and I will post the instructions
You can get this tablet for 145$ on aliexpress for the 4gb ram and 128gb internal storage version
Teclast M30 Tablet Full Specification
Processor (Clock): 2x 2.6 GHz ARM Cortex-A72 4x 2.0 GHz ARM Cortex-A53 4x 1.6 GHz ARM Cortex-A53
Memory (RAM): 4GB LPDDR3, 800 MHz
Internal Storage: 128GB, eMMC
Screen (Size & Type): 10.1 Inches
Camera Overview: 5 Megapixels / 2 Megapixels
OS Version: Android 8.0 Oreo OS
Key Features
Brand – Teclast
Model – M30
Device Type – Android Tablet PC
CPU – Deca-Core 2x 2.6 GHz ARM Cortex-A72 4x 2.0 GHz ARM Cortex-A53 4x 1.6 GHz ARM Cortex-A53 CPU Clock
Chipset – MediaTek Helio X27 (MT6797X), 64-bit Processor
GPU – ARM Mali-T880 MP4, 4 Cores, 875 MHz
Camera – 5 Megapixel Rear Camera | 2 Megapixel Front camera
Memory – RAM- 4GB LPDDR3 | ROM- 128GB with TF card slot up to 128GB
Display – Screen size 10.1 inches IPS Screen (2560 x 1600), 10-Point Touch Screen
Battery – Non-Removable 7500mAh Lithium-Polymer with 100-240V 5V 2.5A AC Adapter
SIM Card – Dual Hybrid Nano SIM
Sensors – Light, Accelerometer, Fingerprint
Color – Silver
Operating System – Android 8.0 Oreo OS
Dimensions – 240 mm x 170 mm x 10 mm
Weight – Grams (With Battery)
Port – 1 x Type Cv2.0 USB Port, 3.5 mm headphone jack, SD (TF) card expansion, Power Off/On, Speaker
More Features – Plastic and Aluminium Alloy Body, Dual Speakers, Bluetooth, LTE Cat 6, HSPA+, EV-DO Rev.A, Dual GPS, Wi-Fi, Capacitive IPS Display, Dual Camera, TF Slot, Quick Charging, Sweet Sound Dual Bottom Speaker, MIC, Type-C USB, Earphone Jack, Eye Care Mode, Reading Mode.
heres the firmware for the teclast tablets
https://docs.google.com/spreadsheet...ciediKQ3-_NW6zAda9xTNdbyqE/edit#gid=794945847
heres the option for installing android 9 or 10 on the m30...however I'm told it ONLY works on the M4P7 model
https://github.com/phhusson/treble_experimentations/wiki/Teclast-M30
heres a post about MTK chipset devices and a program to read information from them
https://4pda.ru/forum/index.php?showtopic=813767&st=0#Spoil-60035994-23
heres a video on how to use it
https://www.youtube.com/watch?v=pj4iFakq33M
if anyone needs SP FLASH TOOLS
https://spflashtools.com/windows/sp-flash-tool-v5-2020

Well, glad to see that this brand isn't dead.

Would you please " EXTRACT THE FIRMWARE ON THE M30". Thanks

KimLe: could you link a howto that describes the firmware extraction process under Linux? Of course I googled for it but I can't find straightforward information on this.

Is there twrp for this device
([emoji3590]09-09-18[emoji3590])

PoochyX said:
Is there twrp for this device
([emoji3590]09-09-18[emoji3590])
Click to expand...
Click to collapse
Not yet.

XX7u said:
KimLe: could you link a howto that describes the firmware extraction process under Linux? Of course I googled for it but I can't find straightforward information on this.
Click to expand...
Click to collapse
You should ask TechGuru123.

https://pan.baidu.com/s/1UPd0JVu1HRKnvQccWpbREw
heres the current firmware
if you want to get firmwares in the future
go here
http://www.teclast.com/tools/pad/pad.php?t=p and enter M4P7 for the device ID
password for baidu as of the time of this post is "jotg"

This Baidu link is dead.
Who's got a working download link for this Teclast M30 stock firmware.
:good:

I managed to get the firmware/rar package from BAIDU if anyone wants it
https://gofile.io/?c=yZyPnD

anyone working on this?

I manage to root it by extract Boot.img , use MaGisk manager to create Magisk_patched.img and flash it with SP-Flash-tools.

m30
KimLe said:
I manage to root it by extract Boot.img , use MaGisk manager to create Magisk_patched.img and flash it with SP-Flash-tools.
Click to expand...
Click to collapse
post it up for people:highfive:

TechGuru123 said:
post it up for people:highfive:
Click to expand...
Click to collapse
I sold my tablet so I can't take any picture.
But you can follow the instructions here.
https://community.umidigi.com/forum.php?mod=viewthread&tid=17376

The firmware version from Baidu is 1.02, but the tablet has 1.03. Is it safe to flash Magisk_patched.img from 1.02 firmware to the 1.03 tablet?

gray1919 said:
The firmware version from Baidu is 1.02, but the tablet has 1.03. Is it safe to flash Magisk_patched.img from 1.02 firmware to the 1.03 tablet?
Click to expand...
Click to collapse
Yeah you should be alright.... I patched Kernals from one baseband to another baseband
([emoji3590]09-09-18[emoji3590])

zappa55 has made a rooted boot.img for anyone who wants it
https://gofile.io/?c=ggUvb1

TechGuru123 said:
zappa55 has made a rooted boot.img for anyone who wants it
https://gofile.io/?c=ggUvb1
Click to expand...
Click to collapse
So, I can flash this directly with SPFlash tool right or any other way? Have u tried?
But, how can I get a scatter file for SPFlash tool?

Reykawick said:
But, how can I get a scatter file for SPFlash tool?
Click to expand...
Click to collapse
Scatter file you can get in the firmware from the first page. But I'm not sure enough if it can be used in case the firmware versions are different.

gray1919 said:
Scatter file you can get in the firmware from the first page. But I'm not sure enough if it can be used in case the firmware versions are different.
Click to expand...
Click to collapse
It's OK to use the scatter file from firmware v1.02.
Works perfectly. After you have installed the new, patched boot.img - just restart the tablet and then install Magisk Manager apk.
Your device is now rooted