[Completed] [HELP] Rooting Devant D-Tab 701 - XDA Assist

I've searching everywhere nothings working on rooting my device Devant D-Tab 701
Here's Tablet Specification
MODEL- DT-701
Series - Orion
CPU - Rockchip (RK3066) ARM Cortex A9 1.6GHz (Dual Core)
Android Platform - Android 4.1.1 (Jelly Bean)
Flash Memory - 8Gb
RAM - 1Gb
DISPLAY PANEL - 7.0"
GPU Type - ARM
GPU Renderer - Mali-400 MP4
GPU (Graphic Processing Unit) - Quad Core
I tried SuperOneClick[x], ZhuoDaShi-2.2.9[x], Manually rooting using psneuter on cmd[x], and flashing update.zip method[x]
is there any other way to root this tab?

While I don't have experience with your specific tablet, I have gone through rooting a similar RK3066 tablet.
Many of the Rockchip tablets already aren't locked down and they just need Superuser or SuperSU installed, but sounds like you may have tried that already.
If it is locked, first I would try Kingo Root.
If you need/want custom recovery, check CWM ported for Rockchip.
If you're lucky, your kernel partition has a valid kernel (mine didn't tho) and the generic RK3066 recovery will work. Make sure you back up your stock recovery first!!!!.
If you need further assistance, please reply on the linked threads.

Related

A20 Dual core Android Box problem.

Can someone please provide me with a working link for this file as none of them works? JUSTOP_DboxACE_FW_422_launcher_V1.4.1_03062013.zip.
I need it as a friend of mine bought a A20 Dual Core Android Allwinner Cortex-A7 1GB/4GB Flash HDMI Quad Core GPU Set Top Box and when he turned it "ON" a warning appeared on the screen " Warning, System configuration is incorrect with the production configuration,please contact your supplier,thank you".
I will try to install the above firmware maybe the warning will disappear.

[Completed] [Q]how to port custom recovery and flash method for bootloader mode on dazen 1

device name is coolpad dazen one (8297L-I00)
having Qualcomm Snapdragon 400/410 1.21 GHz cpu
architecture - 4x ARM Cortex-A53 @ 1.21 GHz
Board- msm8916
2 gb RAM
295 dpi
8 gb storage (4 gb system +4 gb internal)
running on 4.4.4
API level - 19
build ID - 4.4.150.00.T1.150528.KTU84P
java VM - Dalvik 1.6.0
openGL ES - 3.0
kernel architecture - armv7I
kernal version 3.10.28-gb76285c-00075-gdf72c7d(1501731)
(rooted)
i need a CWM recovery for my device
i found a device same as my device (coolpad/yulong f1 plus ) but with minor difference like name ,model etc
it is from the same manufacturer there are 6 version available 3 of MTK and 3 of qualcomm based chipset
i tried to flash recovery which was for f1 plus but it soft bricked my phone or something else all it was showing was bootloader mode
somehow i managed to flash stock recovery via bootloader mode using a batch program developed by cool community which was for flashing recovery on f1 plus
then i decided to port recovery by myself but there is no guide for porting recovery for qualcomm device using windows (as i don't possess linux or ubuntu os)
please help me out
and please tell me if i missed something
thank you in advance......
bonny1256 said:
device name is coolpad dazen one (8297L-I00)
having Qualcomm Snapdragon 400/410 1.21 GHz cpu
architecture - 4x ARM Cortex-A53 @ 1.21 GHz
Board- msm8916
2 gb RAM
295 dpi
8 gb storage (4 gb system +4 gb internal)
running on 4.4.4
API level - 19
build ID - 4.4.150.00.T1.150528.KTU84P
java VM - Dalvik 1.6.0
openGL ES - 3.0
kernel architecture - armv7I
kernal version 3.10.28-gb76285c-00075-gdf72c7d(1501731)
(rooted)
i need a CWM recovery for my device
i found a device same as my device (coolpad/yulong f1 plus ) but with minor difference like name ,model etc
it is from the same manufacturer there are 6 version available 3 of MTK and 3 of qualcomm based chipset
i tried to flash recovery which was for f1 plus but it soft bricked my phone or something else all it was showing was bootloader mode
somehow i managed to flash stock recovery via bootloader mode using a batch program developed by cool community which was for flashing recovery on f1 plus
then i decided to port recovery by myself but there is no guide for porting recovery for qualcomm device using windows (as i don't possess linux or ubuntu os)
please help me out
and please tell me if i missed something
thank you in advance......
Click to expand...
Click to collapse
Hello.
Thank you for using XDA Assist.
There isn't a specific forum for your device.
However, you may post your questions here:
http://forum.xda-developers.com/android/help
You'll find expert advice there.
Good luck!

MXIII M82 - su binary not found

hello i have the device : MXIII M82 Quad Core KitKat Cortex A9 ARM Mali - 450 4K Android 4.4 5GHz WiFi Bluetooth TV Box 2GB DDR3 RAM 8GB ROM Support Max 32GB Capacity - from gearbest.. all was fine.. because i tried to install a app that doesnt allow root devices i tried to un-root..
with hide my root and xposed something like that and now when i tried to run supersu or other app that uses root access cant load ... in supersu when it starts it says " su binary not found "
i tried with kingroot to do root again but nothingit failed .. can someone help me?
Just want to add myself to this thread. Interesting in the advancement of this box to be able to root.

Costum Rom Rk3168 Empire Electronix Rockchip M1002B, Or backup stock rom?

Happy new year, in the first place!
I thought after reading and reading on inet...Gone try here to get a little bit further with a simple but brand new tablet i got from my mother.
That's also the reason why i don't throw it away, i thought lets see if there is a possibility to make it run better then with the stockrom.
And if there is no solution to flash it, what is the best way to backup the rockchip 3168 with 4.2.2 rom off the tablet itself?
Also to try other roms, i don't wane lose my bootloader etc.
Its a simple tablet, i know..But that's also why, i know it can run much better, especially if the ram is not eaten up too much.
I will put the specs down here:
- System info droid -
Summery :
Brand name: Empire Electronix (Manufacture :Rockchip)
Device : Rockchip M1002B
Android :4.2.2
Processor : RK30board-ARMv7 Processor rev 0 (v7l)
Cpu Max Freq : 1200 Mhz
Cores : 2
System Ram : 1.00GB (Some apps say 1500mb)
Audio Chipset : Rk30sdk
Internal Storage : 1008Mb(132 mb free)
Internal SD : 8gb
GPU : Imagination Technologies PowerVR SGX 540
Display Size : 10.1inch - 1024x600Resolution
Screen Density : 90 ppi (160dpi)
Refresh Rate : 82.34 Hz
Back Camera : 1.9 MP(some apps : 2Mp)
Front Camera : 0.3 Mp
System :
Model : M1002B
Manufacture : Rockchip
Android : 4.2.2
Api Level : 17
Kernel : 3.0.36+20131118....
Compilation : V1.01.JDQ39...
Processor :
Processor : Rk30board
Instructions sets : armeabi-v7a, armeabi
Max Freq : 1200Mhz
Gpu :
Model : PowerVr SGX 540 + Output (Mini Hdmi 1920x1080)
Vendor : ITechnologies
OpenGL Version : OpenGL ES 2.0
Advanced Info:
Viewport size : 2048 x 2048
Sensor :
Freescale Semiconductor
Power C : 0.2mA
Max Range : 39.24
Resolution : 0.15328126
Other chips plus board descriptions :
RK30Board
Rockchip616
S-ilead GSL3680
uP6636Q-PGK38L
Wifi lost number of the chip, was realtek with tv in it.Must make new picture to find out but seemed pretty standard wifi Bgn chip.
Buttons : 3 - Power-Volume up/down
Ports : Mini USB2 OTG - Mini Hdmi(DD-DD5.1) - HeadphoneJack - Mic - MiniSD Card slot-
Rooted.
Its a new tablet, but the hardware is older and because of that i thought lets see if i can get it maybe a little bit upgraded on the software side.
And if not, maybe another solution.
Therefore i searched a lot, but has anyone....Anyone maybe a direction to look for a maybe better rom.Also with cwm there is nothing what works with this chip, everything based on the maligpu400 or maybe also with the powerVr Sgx 540?
Other solution would be to backup the rom, and clean afterwards the stock rom.But i got stuck in how and what is the best way to do that.
I cant install Cwm recovery, when it installs it doesn't continue.
I also read that people lost their original bootloader, and because i cant find the stockrom online...What would be the best way to do that, i saw the app mtk, and the Rockchip tool but that seemed a lot off work and if i mess up my backup would never work.
Or is it the only way to back up this rom from Rockchip, a full backup kerel, loader etc..
And to try out a rom, install from sd card, and to get back on the stockrom a factory reset is all, or mess i up the recovery installing another rom?
If more info is needed about the chips, let me know.
Thanks ahead!:good:
Roberto.
i need this firmware .img , i have tablet genesis gt7320 with rk3168 tv , you can send firmware of you tablet ?

Android Update for old Generic Tablet PC

I have an old Tablet PC with an Allwinner A23 Quad-Core, 1GB RAM and 1GB, 5GB more storage, What's the maximum unofficial Android update that I can get?
I attached the CPU-Z screenshots for more info.
Forget it.
Impossible?
I think so. This because computer's system resources are too low where it doesn't matter whether Android should get run via emulator or via dual boot.
This is an android tablet, it don't use emulator or dual boot
FYI:
How I can install android 6 in my tablet?
I discovered that my tablet has an Allwinner A33
santi._.cr said:
I discovered that my tablet has an Allwinner A33
Click to expand...
Click to collapse
This SoC features a Quad-Core Cortex-A7 ARM CPU, and a Mali400 MP2 GPU from ARM. That's good.
The problem in your case is the little available RAM.
santi._.cr said:
How I can install android 6 in my tablet?
Click to expand...
Click to collapse
Find a Custom Recovery suitable to tablet, if found find a Custom Android 6 ROM suitable to tablet. If both found, flash the Custom Recovery and if successful flash the Custom Android 6 ROM via Custom Recovery.
Con you help me find, I'm a newbie, I want Android 5, 6 or 7, any that you find.
DIY
?

Categories

Resources