Database Info

[Q] My FIT has bricked!!! Help

i just flash my fit to gb 2.3.4 XXKPL the one that is DEOXED. At first it was success, i tried to download ROM Manager from ClockWorkMod. then click on Flash on ROM Manager, the click on the Reboot. afther then it never booted, cant go to Download Mode neither on REcovery mode... tried on ODIN but it stays on the connection..
can i use USB Jig on it?

carlsus said:
i just flash my fit to gb 2.3.4 XXKPL the one that is DEOXED. At first it was success, i tried to download ROM Manager from ClockWorkMod. then click on Flash on ROM Manager, the click on the Reboot. afther then it never booted, cant go to Download Mode neither on REcovery mode... tried on ODIN but it stays on the connection..
can i use USB Jig on it?
Click to expand...
Click to collapse
Rom manager = HARD brick (you should read a little bit here many people have Bricked their devices using ROM manager and we are not supposed to use it yet since its not supported for our device)
Go to Samsung guys now.. only they can do it
act like you don't know anything!

Try going into download mode. If you can't then you're facing a hard brick.
Go to samsung service center and act like a retard.
If you can, then just flash the stock ROM via ODIN

Kragusk said:
Hello! I may have a stupid question, but i must know... I know that doing a hard reset will delete almost all user files on my galaxy, like "//mnt/sdcard/..." and reset my settings of the firmware. Can i delete ALL files from my sg? I mean all from "//..." all from root directory. Just asking...What i acctualy want to know is if i delete all will i be able to go into download mode for flashing a new firmware after that? The reason for this is that i tested a lot of firmwares and custom roms and tiny bits and pieces still remain "hidden" thus i want to erase EVERYTHING! Gonna do it too...
Click to expand...
Click to collapse
I guess you cant hard reset if you cant boot up...
The only option which remains at this stage is going to Samsung centre
Dont be worried in the tiny bits of your ROM's act like a newbie who doesn't know android just say its not working.. if they ask what had happened say you were copying data or whatever and this happened.. act normal and calm..
I'm sure your device will be repaired (they'll change the motherboard in most cases) and be careful with your device next time

I briked my galaxy fit, because i installed a rom (via odin) that my telephone didn't support.
Try it!!!!, i could unbrick my galaxy fit!!:
1. Open Odin, select the OPS, and an official rom.
2. put out: sim, sd card, and the BATTERY
3. Connect the galaxy fit at the PC with the USB
4. Try open download mode (it won't run, but, you must press: Down Volume + Home + Power)
5. While you are pressing the buttons, if you can't, other person must put the battery.
6. Wait 5 seconds and... TA TAN!!!!... download mode turns on!!!!!!!!!
7. Now... you must press START in odin, and the rom will install in your galaxy fit.
I hope you can unbrick your galaxy fit!!
Sorry for my bad english. I speak spanish ^^

This means that you had a soft brick. In a soft brick, you can boot into download mode.
In a hard brick, you can do nothing.
5. While you are pressing the buttons, if you can't, other person must put the battery.
Click to expand...
Click to collapse
SIM, SD-Card and Battery have nothing to do with download mode.

How do plan do that?
Sent from my GT-S5670 using XDA App

Kragusk said:
Thanks for your support franco 007, but i did not brick my phone, and by installing roms you cant brick your phone, you just install another firmware via odin, i allready know that, my question was if i delete all my files from the ROOT FOLDER "//root/DELETE EVERYTHING" can i go into download mode so i can make a fresh install. Am i not expressing myself corectly?
Click to expand...
Click to collapse
Obviously, you can't do that when booted up.....
In recovery mode.... You can only format sdcard, data, system and cache.
IMO, it can't be done by any simple means.
and since that doesn't serve any purpose, I doubt anyone would resort to any complex methods to do that

hmm no....
anyways, i doubt that you can format the "/" partition using Root Explorer
give it a try

hehe.. i only post the answer of the first post, the person that has briked his phone.
i did that and my fit now runs correctly, and i have installed a lot of custom roms,with clockworkmod recovery

a lot of custom roms?
you can install only one at a time.

franco077 said:
I briked my galaxy fit, because i installed a rom (via odin) that my telephone didn't support.
Try it!!!!, i could unbrick my galaxy fit!!:
1. Open Odin, select the OPS, and an official rom.
2. put out: sim, sd card, and the BATTERY
3. Connect the galaxy fit at the PC with the USB
4. Try open download mode (it won't run, but, you must press: Down Volume + Home + Power)
5. While you are pressing the buttons, if you can't, other person must put the battery.
6. Wait 5 seconds and... TA TAN!!!!... download mode turns on!!!!!!!!!
7. Now... you must press START in odin, and the rom will install in your galaxy fit.
I hope you can unbrick your galaxy fit!!
Sorry for my bad english. I speak spanish ^^
Click to expand...
Click to collapse
i tried this but ODIN cant detect my phone using Down Volume+Home+Power..
instead it detected if i press UP Vol+HOme+power but im stuck with setup connection...

Vol Up + Home + Power = ?

lomash said:
Vol Up + Home + Power = ?
Click to expand...
Click to collapse
ODIN can detect my device if i press vol up+home+power. but the thing is it stay stuck in setup connection.. nothing happens.. it just wasted time and not flashing any files..

Oh the ram dump mode.
what does it do exactly?

Hey i'm in a trouble, I have a Galaxy Fit but is latinoamerica version (GT-S5670L) I hard-bricked it, it doesn't boot at all, download and recovery mode too, when I try to flash the rom again with odin and it's respective 2.3.4 Gingerbread latinoamerican version (México) odin get stuck at "Setup connection", now i dont know how to unbrick it, I tried everything and i will try every solution that you give to me! I need to unbrick that phone urgently, now I have a Galaxy Ace (Latinoamerica/México/Telcel) but... I really need to unbrick that phone
Sent from my GT-S5830L using xda premium

what did you do? or how did u brick it?
que hacias o que intentaste hacer?
Enviado desde mi GT-S5670 usando Tapatalk

Nothing special, just turned it off normally, it wasnt the only time that turned off the phone
Nada en especial, solo lo apague normalmente pero no fue la unica vez que lo apague desde que flashee la rom
Sent from my GT-S5830L using xda premium

no, you must press DOWN volume button :S
down volume + home + power

those who installed rom manager is nothing to do,you can only change the motherboard of phone or use riff jtag wich is about 30-40 $

[Q] Brick forever or possibility to restore?

Good evening everyone.
I bought Samsung galaxy tab 7.7 GT-P6800 about month ago. It's been working fine, till this saturday. When i tried to unlock my Tab, device didn't respond. I tried to power it on, but still no response. Hm, the reason of this thing is only one - too low battery. So, i putted my device on charge (saw battery icon on screen). After 2 hours, I came back and tried to power my device again, but it freezed with this battery icon. I hold power button for 10-15 seconds and my device started to load, but it got freezed on "Samsung Galaxy Tab 7.7". My Tab is rooted, but firmware is official.
What my DEVICE CAN'T DO:
* Can't load into CWM (freezing at "Samsung Galaxy Tab 7.7";
* Can't Power on;
* Can't charge;
* Can't connect to PC.
What my DEVICE CAN DO:
* Load into Downloading mode.
Is it possible to restore my Tab? If yes, how to do it, using Downloading mode (Kies doesn't see my tab)? Please help.
Thanks for your help.

Mrakoris/ said:
Good evening everyone.
I bought Samsung galaxy tab 7.7 GT-P6800 about month ago. It's been working fine, till this saturday. When i tried to unlock my Tab, device didn't respond. I tried to power it on, but still no response. Hm, the reason of this thing is only one - too low battery. So, i putted my device on charge (saw battery icon on screen). After 2 hours, I came back and tried to power my device again, but it freezed with this battery icon. I hold power button for 10-15 seconds and my device started to load, but it got freezed on "Samsung Galaxy Tab 7.7". My Tab is rooted, but firmware is official.
What my DEVICE CAN'T DO:
* Can't load into CWM (freezing at "Samsung Galaxy Tab 7.7";
* Can't Power on;
* Can't charge;
* Can't connect to PC.
What my DEVICE CAN DO:
* Load into Downloading mode.
Is it possible to restore my Tab? If yes, how to do it, using Downloading mode (Kies doesn't see my tab)? Please help.
Thanks for your help.
Click to expand...
Click to collapse
You can flash new rom via pc odin if you can go to download mode. I would suggest go over this thread first http://forum.xda-developers.com/showthread.php?t=1469635

cakrabayu said:
You can flash new rom via pc odin if you can go to download mode. I would suggest go over this thread first http://forum.xda-developers.com/showthread.php?t=1469635
Click to expand...
Click to collapse
Thanks.
I restored my Tab to original firmware, but still freezing at "Samsung Galaxy tab 7.7".

Mrakoris/ said:
Thanks.
I restored my Tab to original firmware, but still freezing at "Samsung Galaxy tab 7.7".
Click to expand...
Click to collapse
I feel sorry about that. Do you clean install your ROM? If you can now go to CWM Recovery, then it would be good. You can try factory reset in CWM.

I had the same issue this is when the flashed Rom is damaged.You need to install the originap Samsung Rom which can be bought from samsung or give your tab to a repair shop they will have the neccery things.
Sent from my GT-N7100 using xda app-developers app

you need to make factory reset using cwm recovery... If you reinstall the Official Honeycomb firmware... you are safe to wipe using the stock 3e recovery... if you are on ICS... please go to download mode and install cwm... then factory reset...

edan1979 said:
you need to make factory reset using cwm recovery... If you reinstall the Official Honeycomb firmware... you are safe to wipe using the stock 3e recovery... if you are on ICS... please go to download mode and install cwm... then factory reset...
Click to expand...
Click to collapse
Hey,
Thanks for your reply!
I flashed my SGT 7.7 back to Official Honeycomb firmware, but i still can't access recovery mode. The only thing i can do is - load into download mode. I can't install CWM, because i flashed it to NON rooted Official firmware. It's still like a brick
Any other suggestions?
Thanks!

how did you try to enter the recovery mode? what key combination that you press...

Mrakoris/ said:
Hey,
Thanks for your reply!
I flashed my SGT 7.7 back to Official Honeycomb firmware, but i still can't access recovery mode. The only thing i can do is - load into download mode. I can't install CWM, because i flashed it to NON rooted Official firmware. It's still like a brick
Any other suggestions?
Thanks!
Click to expand...
Click to collapse
Isnt it possible to flash CWM without rooting first??
If I remember correctly.... Go into download mode... using Odin and flash CWM....
if you get that..... then try to re=boot into recovery and wipe away if your on HC...
good luck

edan1979 said:
how did you try to enter the recovery mode? what key combination that you press...
Click to expand...
Click to collapse
Power + Volume Up buttons.

jimmbomb said:
Isnt it possible to flash CWM without rooting first??
If I remember correctly.... Go into download mode... using Odin and flash CWM....
if you get that..... then try to re=boot into recovery and wipe away if your on HC...
good luck
Click to expand...
Click to collapse
Flashed CWM using Odin, but still can't access anything. I can only see two loading screens:
1. Freezing battery icon. (it happens, when i try to charge my tablet)
2. Freezing Samsung Galaxy Tab 7.7 sign.(it happens, when i just try to power my device on)
The only way I can power off my tablet is to wait untill my device's battery discharges.

I'm in the same situation:
1. Freezing battery icon. (it happens, when i try to charge my tablet)
2. Freezing Samsung Galaxy Tab 7.7 sign.(it happens, when i just try to power my device on)
Although I can boot into CWM 5.0.2.7 but I'm unable to successfully get a rom to work...
Very frustrating isn't it.
I'm thinking about trying this...
http://forum.xda-developers.com/showthread.php?t=1667886

ianmere said:
I'm in the same situation:
1. Freezing battery icon. (it happens, when i try to charge my tablet)
2. Freezing Samsung Galaxy Tab 7.7 sign.(it happens, when i just try to power my device on)
Although I can boot into CWM 5.0.2.7 but I'm unable to successfully get a rom to work...
Very frustrating isn't it.
I'm thinking about trying this...
http://forum.xda-developers.com/showthread.php?t=1667886
Click to expand...
Click to collapse
Heh, that's true. If anything will help you to make your device alive again, please tell me. Because I really have no idea what to do. Tried everything...
Thanks.

Mrakoris/ said:
Heh, that's true. If anything will help you to make your device alive again, please tell me. Because I really have no idea what to do. Tried everything...
Thanks.
Click to expand...
Click to collapse
OK, I went through the following guide
http://forum.xda-developers.com/showthread.php?t=1862294
And it really worked!!! it takes a while, you will need to put aside around 1-2 hours to go through it carefully step by step.
I flashed CWM using odin first.

ianmere said:
OK, I went through the following guide
http://forum.xda-developers.com/showthread.php?t=1862294
And it really worked!!! it takes a while, you will need to put aside around 1-2 hours to go through it carefully step by step.
I flashed CWM using odin first.
Click to expand...
Click to collapse
What firmware were you using on your tablet, while you were flashing CWM? Why I am asking it, is because i tried lots of different firmwares to install CWM and i couldn't boot into CWM niether with honeycomb, nor with ICS. And yeah thanks for your help.

Mrakoris/ said:
What firmware were you using on your tablet, while you were flashing CWM? Why I am asking it, is because i tried lots of different firmwares to install CWM and i couldn't boot into CWM niether with honeycomb, nor with ICS. And yeah thanks for your help.
Click to expand...
Click to collapse
I started with ICS stock but after my initial flash did't work I believe I wasn't really running any rom because it didn't work.
I then went into Odin/download mode (holding volume down and power).
once in I used the cwm-6.0.2.3-p6800.tar file and loaded it under "Bootloader" then I flashed that successfully.
to then get into recovery I hold Volume up + power (for a very long time about 20secs).
Once in recovery then you can begin the above guide to repair the sdcard.
Hope that helps.

Thanks again for your reply.
I did exactly everything you wrote, even installed original ICS firmware again using Odin. Flashed recovery, hold Power + Vol Up buttons for like 5 minutes, but f*** this, still didn't boot into recovery. Erh.. my device is broken forever.. No solution for all this..

Mrakoris/ said:
What my DEVICE CAN'T DO:
* Can't load into CWM (freezing at "Samsung Galaxy Tab 7.7";
* Can't Power on;
* Can't charge;
* Can't connect to PC.
What my DEVICE CAN DO:
* Load into Downloading mode.
Click to expand...
Click to collapse
I'm in the same situation as Mrakoris, expect that I was in CM 10 and flashed to CM 10.1 before I got a brick.
cakrabayu said:
You can flash new rom via pc odin if you can go to download mode. I would suggest go over this thread first http://forum.xda-developers.com/showthread.php?t=1469635
Click to expand...
Click to collapse
I had a look at that topic but I'd rather try to get to CWM first just to wipe data/cache partitions.
Mrakoris/ said:
Flashed CWM using Odin, but still can't access anything. I can only see two loading screens:
1. Freezing battery icon. (it happens, when i try to charge my tablet)
2. Freezing Samsung Galaxy Tab 7.7 sign.(it happens, when i just try to power my device on)
The only way I can power off my tablet is to wait untill my device's battery discharges.
Click to expand...
Click to collapse
ianmere said:
OK, I went through the following guide
http://forum.xda-developers.com/showthread.php?t=1862294
And it really worked!!! it takes a while, you will need to put aside around 1-2 hours to go through it carefully step by step.
I flashed CWM using odin first.
Click to expand...
Click to collapse
How do you flash CWM using ODIN? CWM isn't a Bootloader, nor a PDA, nor a Phone, nor a CSC.
Thanks in advance, hope I'll get back my Galaxy Tab 7.7!

1. go to download mode
2. connect your device to your pc and start odin
3. put the cwm files on phone section of odin
4. flash awayyyyy....

Yay
Yaaaaay! Problem solved! My Samsung Galaxy Tab 7.7. P6800 is alive again!
The problem was so easy, that i laught alot, when solved it. The problem was with micro SDcard. I used micro SDcard from my last Nokia phone, but Nokia's micro SDcard didn't approach to SGT7.7, but it approached ONLY by the size! So I used another micro SDcard, which I got when I bougt my Tab! Woohoo, i'm so happy now :laugh:

[Q] Gtab P3100 stuck on "Samsung Galaxy Tab 2" Screen

Hi there, i'm from indonesia...
Just wondering whats wrong with my step, cause now i got P3100 "stuck on "Samsung Galaxy Tab 2" Screen" until the battery drains out...
First :
- Trun off P3100
- put download mode
- connect P3100 to pc
- Click ODIN
- select "GT-P3100_ClockworkMod-Recovery_6.0.1.0.tar" file on PDA
- START
- Finish (Sucssesful)
- Reboot
- Result "stuck on "Samsung Galaxy Tab 2" Screen"
Note : just try to flash cwm to flash root.zip for P3100
Second :
- Trun off P3100
- put download mode
- connect P3100 to pc
- Click ODIN
- select "P3100XXBLH2_P3100OLBBLH1_P3100XXLH2_HOME.tar.md5" file on PDA (downloaded from Sammobile)
- START
- Finish (Sucssesful)
- Reboot
Note : Try to Restock to stock firmware 4.0.4 & already try with PIT.File selected on ODIN but..
- still "stuck on "Samsung Galaxy Tab 2" Screen"
Anybody can help me with this issue...??
Cheers

Maybe you could try reflashing the stock firmware WITHOUT any PIT file. I only remember needing a PIT file for older devices like the original Galaxy Tab P1000, not for the newer ones like the P3110.
After which, instead of letting it boot normally, try booting into recovery mode, do a factory reset/wipe cache from there then see if all works again.
Btw, one of the more popular rooting methods for P3110 is actually Chainfire AutoRoot, which does not require custom recovery like CWM and only requires you to flash the AutoRoot tar file through ODIN. Very simple & recommended by everyone here.

Ok, will try today and report soon...
Cheers
Sent from my Desire HD2 using xda premium

jaydaman said:
Maybe you could try reflashing the stock firmware WITHOUT any PIT file. I only remember needing a PIT file for older devices like the original Galaxy Tab P1000, not for the newer ones like the P3110.
After which, instead of letting it boot normally, try booting into recovery mode, do a factory reset/wipe cache from there then see if all works again.
Btw, one of the more popular rooting methods for P3110 is actually Chainfire AutoRoot, which does not require custom recovery like CWM and only requires you to flash the AutoRoot tar file through ODIN. Very simple & recommended by everyone here.
Click to expand...
Click to collapse
Result still stuck on "Samsung Galaxy Tab 2" screen and now every time i connect my tab to wall charger its only display empty battery with like loading proces but stil no battery icon with green bar & i feel my tab is hot when i plug to wall charger for more than 1 hour...
Conditiom right now :
- doesn't have charging indicator
- still stuck on boot screen
- still can enter download mode
- still cannot eneter stock recovery
- the Battery is feel hot
Anyone can help me out...??
Cheers

Sounds like the bootloader got messed up. That's bad & probably only the service centre can help you now.

No, if you can get it into download mode it's fixable. ODIN recovery again and try to get into recovery.
Posted from my Fascinate using XDA Premium

Probably flashing into stock rom will fixed it, as long as your download mode can be accessing you're gonna be fine :thumbup:

You guys are forgetting the most basic thing to fix the tab. Hold Power+Volume up instead of power+volume down. then using the volume keys highlight wipe data/factory reset and then press power, yes and then once finished reboot the tab.

Facing same problem
Help me
I m facing same problem
How to solve it????

What have you done exactly @saddam6600 ? Please tell each Step!
Have you tryed a factory-reset in Recovery?

I unknowingly got into the same problem..
I managed to get into download mode..
then using adb., I rebooted to recovery..
den I wiped cache, data and system.
den I installed an aosp based rom..
nd den evrythng went fine..

i tried to root it
shivam plzz give me link for that rom
plzz

saddam6600 said:
shivam plzz give me link for that rom
plzz
Click to expand...
Click to collapse
It was cyanogenmod 10.2.
I deleted the rom so can't help you with the link.
Any cyanogenmod rom should work..
try thr latest build..

---> http://forum.xda-developers.com/showpost.php?p=50766295&postcount=1001

Hello I have a Samsung Galaxy Tab 2 7.0 It has been experiencing A problem like yours it has been stuck on the "Samsung galaxy tab" screen i read that you should wide all data so i did.. And i read to flash it back to the last rom. i made mine in custa the usb debugging was turned off.om i was trying to put it into stock rom when i encountered the problem. Then when i put it in download mode i was wondering why it can't be detected i realized that because i wiped all data the usb debugging was turned off so. there was no way to flash it back using odin PLEASE help me my tablet version is GT-P3100XXLH2 the fixed one so it has no way to remove the battery the only way was via screws but we don't have the same size PLease healp it's been like this since yesterday

LBGS said:
Hello I have a Samsung Galaxy Tab 2 7.0 It has been experiencing A problem like yours it has been stuck on the "Samsung galaxy tab" screen i read that you should wide all data so i did.. And i read to flash it back to the last rom. i made mine in custa the usb debugging was turned off.om i was trying to put it into stock rom when i encountered the problem. Then when i put it in download mode i was wondering why it can't be detected i realized that because i wiped all data the usb debugging was turned off so. there was no way to flash it back using odin PLEASE help me my tablet version is GT-P3100XXLH2 the fixed one so it has no way to remove the battery the only way was via screws but we don't have the same size PLease healp it's been like this since yesterday
Click to expand...
Click to collapse
Wipe data and install a touchwiz based rom first. I had the same problem and it is a problem of the bootloader.
Then flash twrp using odin.
Once i flashed twrp, all roms work perfect on my tab 2.
Hope that helped.
Sent from my Galaxy S7 edge using XDA-Developers mobile app

can you tell me step by step pls. i'm just a kid btw
dev.kasibhatla said:
Wipe data and install a touchwiz based rom first. I had the same problem and it is a problem of the bootloader.
Then flash twrp using odin.
Once i flashed twrp, all roms work perfect on my tab 2.
Hope that helped.
Sent from my Galaxy S7 edge using XDA-Developers mobile app
Click to expand...
Click to collapse
Tell me step by step pls. i don't know how to do this properly i'm just a kid.

[Q] HELP my device is stuck on samsung logo screen

HEY guyzz hope this site will be helpful,
first of all i have a samsung galaxy tab 2 (p5100), i have recently installed cyanogenmod 10 on my tab. when installing cyanogenmod i faced a problem of stucking on the boot loop of cyanogenmod but i solved it by getting in recovery mode and wiping cache and wiping data/factory reset, after then i wanted to have google apps in my tab as installed cyanogenmod does not have google apps. i downloaded google apps pack from net and installed it by the same way i have installed cyanogenmod but when after it rebooted my TAB and wizard touch setup keeps crashes. then, i get into recovery and again wiped data/factory reset. then again rebooted and it crashed again the worst thing is that i cant go to my homescreen or to the apps drawer then, i downloaded cyanogenmod nightly and send it to my tab and try to install it by going in recovery but i cant install it. then i get to the advanced and formatted user data, and rebooted after then my tab always stuck on the the logo screen on the logo sreen it said: Samsung Galaxy Tab 2. Now, i cant go to recovery nor in the download mode. PLZZ HELP ME HOPE I WILL GET THE SOLUTION VERY FAST.....

ashuto said:
HEY guyzz hope this site will be helpful,
first of all i have a samsung galaxy tab 2 (p5100), i have recently installed cyanogenmod 10 on my tab. when installing cyanogenmod i faced a problem of stucking on the boot loop of cyanogenmod but i solved it by getting in recovery mode and wiping cache and wiping data/factory reset, after then i wanted to have google apps in my tab as installed cyanogenmod does not have google apps. i downloaded google apps pack from net and installed it by the same way i have installed cyanogenmod but when after it rebooted my TAB and wizard touch setup keeps crashes. then, i get into recovery and again wiped data/factory reset. then again rebooted and it crashed again the worst thing is that i cant go to my homescreen or to the apps drawer then, i downloaded cyanogenmod nightly and send it to my tab and try to install it by going in recovery but i cant install it. then i get to the advanced and formatted user data, and rebooted after then my tab always stuck on the the logo screen on the logo sreen it said: Samsung Galaxy Tab 2. Now, i cant go to recovery nor in the download mode. PLZZ HELP ME HOPE I WILL GET THE SOLUTION VERY FAST.....
Click to expand...
Click to collapse
You may probably think it is the gapps that has some problems, but actually its your ROM's issue.
my friend has a htc desire z and he tried a lots of version of gapps and ROMs in many combinations and what happened is-
AOSB ROM without gapps = perfect!
AOSB ROM with any version of gapps = bootloop
any other ROM with or without any version of gapps = perfect!
So i can include, his AOSB ROM as well as your ROM has issues!
Try using another one!

cant go into recovery mode nor in download mode
samsungrockz said:
You may probably think it is the gapps that has some problems, but actually its your ROM's issue.
my friend has a htc desire z and he tried a lots of version of gapps and ROMs in many combinations and what happened is-
AOSB ROM without gapps = perfect!
AOSB ROM with any version of gapps = bootloop
any other ROM with or without any version of gapps = perfect![/COLOR
So i can include, his AOSB ROM as well as your ROM has issues!
Try using another one!
Click to expand...
Click to collapse
Thx for the advise and i also undrstand what u r trying to say but tell me how i intall a new rom as i cant go in recovery nor in download mode hope u will reply fast and give me a suitable and best answer....thx anyway

What happens when you try to turn it on in download mode, by pressing power+volume down, what happens?? Does a "firmware error" shows up?
If nothing happens like i told above, keep your tab on untill the battery dies then connect it to charger and you might be lucky to get into download mode

samsungrockz said:
What happens when you try to turn it on in download mode, by pressing power+volume down, what happens?? Does a "firmware error" shows up?
If nothing happens like i told above, keep your tab on untill the battery dies then connect it to charger and you might be lucky to get into download mode
Click to expand...
Click to collapse
thx, but i cant go in download mode as download mode comes after the screen which says : Samsung Galaxy Tab 2. and i get stuck on this screen only so how can i get to the download mode or in recovery mode as per ur instruction i hav drained my tab battery and plugged it for charging what to do next??. one more thing i want to say is when i plugged my tab the charging sign appear but it was not the original sign of samsung it was the sign of cyanogenmod so i think cyanogenmod not has any issues.....or whatever i dont know much bout androids....plzz help waiting for ur fast and best reply hope u will post a exellent result at last.....PLZZ HELP

Sorry but seems i can no longer help you. If you could get into download mode somehow, things would be much easier.
For now, i can just recommend you visit a cyanogenmod forum , they can help you for sure.
Or you can take it to nearby samsung store, anyways.

samsungrockz said:
Sorry but seems i can no longer help you. If you could get into download mode somehow, things would be much easier.
For now, i can just recommend you visit a cyanogenmod forum , they can help you for sure.
Or you can take it to nearby samsung store, anyways.
Click to expand...
Click to collapse
thx buddy anyway, thx for ur advises if u can plzz tell me how i get into download mode somehow any tweaks u know ?? it would be grt if u help....

Well i don't know any other process to boot into download mode other than pressing and holding the volume down and power button for 7-8 seconds! Then a red traingle appers, continue by pressing volume up ! I don't know any other method! Sorry

samsungrockz said:
Well i don't know any other process to boot into download mode other than pressing and holding the volume down and power button for 7-8 seconds! Then a red traingle appers, continue by pressing volume up ! I don't know any other method! Sorry
Click to expand...
Click to collapse
plzz any other way u know or plzz suggest me wat prob had occured in my tab

magicly entered in download mode
yay entered im download mode wat to do next help me fast

Great!! now that you've entered download mode, first install Odin in your pc, connect your tab with usb cable and see if odin can detect your phone.
Now download the official firmware of your tab 2, p5100 from http://www.sammobile.com/ (download the firmware compatible in your country and flash it via odin.
Use google search to get detailed description of how to use odin, Best of luck

ashuto said:
yay entered im download mode wat to do next help me fast
Click to expand...
Click to collapse
Flash stock rom for your device, downloaded from sammobile.com. Use Odin to flash.

Can u guys please tell me some download links my device info. is : Samsung Galaxy Tab 2 (GT5100) i can't find links plzz help:angel:

Get it here >> http://live.samsung-updates.com/index.php?device=GT-P5100 choose the country you live in and download!

thx for ur support and special thx to xda forums
Thx guys for ur grt support and motivation I'm drifting this reply with my Samsung galaxy tab 2 p5100 with CyanogenMod 10.1.3. I solved this matter by finding my originally cm10.zip and installed it by going in recovery mode. However u guys helped me a lot by giving or motivation. I gaved up when I can't go in recovery mode but samsung rockz motivated me and I tried and zooooom the recovery opened thx for or support samsungrockz:good::fingers-crossed::angel:::victory::highfive::angel::angel::angel::angel::angel::angel:

ashuto said:
Thx guys for ur grt support and motivation I'm drifting this reply with my Samsung galaxy tab 2 p5100 with CyanogenMod 10.1.3. I solved this matter by finding my originally cm10.zip and installed it by going in recovery mode. However u guys helped me a lot by giving or motivation. I gaved up when I can't go in recovery mode but samsung rockz motivated me and I tried and zooooom the recovery opened thx for or support samsungrockz:good::fingers-crossed::angel:::victory::highfive::angel::angel::angel::angel::angel::angel:
Click to expand...
Click to collapse
Wow feels good that your tablet has been fixed happy to help never give up on something

[Q&A] [ROM][P51xx][4.4.4] CyanogenMod 11 (CM11)

Q&A for [ROM][P51xx][4.4.4] CyanogenMod 11 (CM11)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:

I just found that changing the wallpaper multiple times(twice or thrice or maybe even once) results in black background which cannot be changed. After wallpaper becomes black the interface seems to lag and if the device is locked and screen turns off then the display won't turn on even after pressing the power button! And I had to restart the device!

flixster
Hello,
thanks for this great image. Everything works fine onmy 5110 except flixster.
Has anyone a solution to run flixster on cm11 ?

sabincruz said:
I just found that changing the wallpaper multiple times(twice or thrice or maybe even once) results in black background which cannot be changed. After wallpaper becomes black the interface seems to lag and if the device is locked and screen turns off then the display won't turn on even after pressing the power button! And I had to restart the device!
Click to expand...
Click to collapse
I change my wallpaper often and have not run into this issue, try reflashing rom.
Pp.

Is it because i flashed this Rom directly from stock android 4.0! I did not upgrade to stock jellybean!

i have noticed since using cm11 rom nightlies, some game audio/bgm sound seems distorted compared with jelly bean stock rom,
although gameplay little bit slow but still playable, even after applying custom kernel for cm11
and with cm11 nightlies (141103) wallpaper become black, from logcat show up many errors from WallpaperManager or something like that.

Wifi Ad-hoc Mode
Hi,
I have installed this rom in my p5110 device and I want to use the wifi in adhoc mode. But the Cyanogenmod for p5110 has no option to create a adhoc network. I have the Cyanogenmod 11 installed in a Galaxy S (i9000B) and works fine.
Why the p5110 does not show the option to create the adhoc network?
Thanks for yours attention

sabincruz said:
I just found that changing the wallpaper multiple times(twice or thrice or maybe even once) results in black background which cannot be changed. After wallpaper becomes black the interface seems to lag and if the device is locked and screen turns off then the display won't turn on even after pressing the power button! And I had to restart the device!
Click to expand...
Click to collapse
Same problem for me (with nightly 20141105)

Nightly means, I'm changing some stuff (experimenting ) on this rom and you by downloading will be my tester,if it works it becomes an update to rom. If doesn't work, it gets canned. Just nandroid back to original rom.
Pp.

Hi, where can i find 4.4 gapps (minimal)??
Thanks

Google is your friend.
Pp.

GTP3110 - CM11 Installation Failed
Samsung Galaxy Tab 2 7" (Wi-Fi)
I tried to install CM11 under Mac with Terminal but it failed (maybe i unplugged the USB cable too early).
Now the Tab does not work: "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again".
Under Mac OS X Yosemite ADB can't recognize my device, reboot in recovery or in download mode.
/*
Marcis-HP-MacBook:android kmarci94$ ./adb devices
List of devices attached
Marcis-HP-MacBook:android kmarci94$
*/
What can i do to restore my tab to CM or the original one?

There is no Odin oder heimdall package out of cm11,
Please tell what you have done exactly
Send from OnePlus One using Tapatalk

GTP3110 - CM11 Installation Failed
Android-Andi said:
There is no Odin oder heimdall package out of cm11,
Please tell what you have done exactly
Send from OnePlus One using Tapatalk
Click to expand...
Click to collapse
I followed that guid the original cyanogenmod wiki guid for GTP3110
And the tab didn't showed the blue transferscreen. I waited for that probably 10-15minutes but nothing happened (but mac said that transfer was finished), and i unplugged the USB cable.
guide: wiki.cyanogenmod.org/w/Install_CM_for_p3110

So you tried to flash CWM, right?
Connect your Tab and try again using heimdall, download mode running in background of your BSOD (Black Screen of Death).
Good luck!
Send from OnePlus One using Tapatalk

GTP3110 - CM11 Installation Failed
Android-Andi said:
So you tried to flash CWM, right?
Connect your Tab and try again using heimdall, download mode running in background of your BSOD (Black Screen of Death).
Good luck!
Send from OnePlus One using Tapatalk
Click to expand...
Click to collapse
Well... Have to be any solution.

kmarci94 said:
I followed that guid the original cyanogenmod wiki guid for GTP3110
And the tab didn't showed the blue transferscreen. .............
guide: wiki.cyanogenmod.org/w/Install_CM_for_p3110
Click to expand...
Click to collapse
You said you used this guide, you didn't flash a P3110 cm rom by accident, did you?
If you did it could be bricked. ???
Pp.

Doesn't matter if recovery or rom from p31xx flashed on p51xx (same the other way, sometimes i flash p51xx stuff on my p3110), only cause wrong resolution and touch won't work.
He failed on flashing CWM, on BSOD Odin and heimdall still can be used to flash a rom or recovery, download mode running in background automatically.
Send from OnePlus One using Tapatalk

Thanks for clarification.
Pp.

GTP3110 - CM11 Installation Failed
PanchoPlanet said:
You said you used this guide, you didn't flash a P3110 cm rom by accident, did you?
If you did it could be bricked. ???
Pp.
Click to expand...
Click to collapse
Actually i don't know could or not be bricked but I'm sure that i flashed p3110 CM ROM. Before the blue screen it stucked or something like that. Now it shows that message (and a can't recognize the device with dab or i can't boot recovery or download mode with buttons): "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again."