Hi there, i'm from indonesia...
Just wondering whats wrong with my step, cause now i got P3100 "stuck on "Samsung Galaxy Tab 2" Screen" until the battery drains out...
First :
- Trun off P3100
- put download mode
- connect P3100 to pc
- Click ODIN
- select "GT-P3100_ClockworkMod-Recovery_6.0.1.0.tar" file on PDA
- START
- Finish (Sucssesful)
- Reboot
- Result "stuck on "Samsung Galaxy Tab 2" Screen"
Note : just try to flash cwm to flash root.zip for P3100
Second :
- Trun off P3100
- put download mode
- connect P3100 to pc
- Click ODIN
- select "P3100XXBLH2_P3100OLBBLH1_P3100XXLH2_HOME.tar.md5" file on PDA (downloaded from Sammobile)
- START
- Finish (Sucssesful)
- Reboot
Note : Try to Restock to stock firmware 4.0.4 & already try with PIT.File selected on ODIN but..
- still "stuck on "Samsung Galaxy Tab 2" Screen"
Anybody can help me with this issue...??
Cheers
Maybe you could try reflashing the stock firmware WITHOUT any PIT file. I only remember needing a PIT file for older devices like the original Galaxy Tab P1000, not for the newer ones like the P3110.
After which, instead of letting it boot normally, try booting into recovery mode, do a factory reset/wipe cache from there then see if all works again.
Btw, one of the more popular rooting methods for P3110 is actually Chainfire AutoRoot, which does not require custom recovery like CWM and only requires you to flash the AutoRoot tar file through ODIN. Very simple & recommended by everyone here.
Ok, will try today and report soon...
Cheers
Sent from my Desire HD2 using xda premium
jaydaman said:
Maybe you could try reflashing the stock firmware WITHOUT any PIT file. I only remember needing a PIT file for older devices like the original Galaxy Tab P1000, not for the newer ones like the P3110.
After which, instead of letting it boot normally, try booting into recovery mode, do a factory reset/wipe cache from there then see if all works again.
Btw, one of the more popular rooting methods for P3110 is actually Chainfire AutoRoot, which does not require custom recovery like CWM and only requires you to flash the AutoRoot tar file through ODIN. Very simple & recommended by everyone here.
Click to expand...
Click to collapse
Result still stuck on "Samsung Galaxy Tab 2" screen and now every time i connect my tab to wall charger its only display empty battery with like loading proces but stil no battery icon with green bar & i feel my tab is hot when i plug to wall charger for more than 1 hour...
Conditiom right now :
- doesn't have charging indicator
- still stuck on boot screen
- still can enter download mode
- still cannot eneter stock recovery
- the Battery is feel hot
Anyone can help me out...??
Cheers
Sounds like the bootloader got messed up. That's bad & probably only the service centre can help you now.
No, if you can get it into download mode it's fixable. ODIN recovery again and try to get into recovery.
Posted from my Fascinate using XDA Premium
Probably flashing into stock rom will fixed it, as long as your download mode can be accessing you're gonna be fine :thumbup:
You guys are forgetting the most basic thing to fix the tab. Hold Power+Volume up instead of power+volume down. then using the volume keys highlight wipe data/factory reset and then press power, yes and then once finished reboot the tab.
Facing same problem
Help me
I m facing same problem
How to solve it????
What have you done exactly @saddam6600 ? Please tell each Step!
Have you tryed a factory-reset in Recovery?
I unknowingly got into the same problem..
I managed to get into download mode..
then using adb., I rebooted to recovery..
den I wiped cache, data and system.
den I installed an aosp based rom..
nd den evrythng went fine..
i tried to root it
shivam plzz give me link for that rom
plzz
saddam6600 said:
shivam plzz give me link for that rom
plzz
Click to expand...
Click to collapse
It was cyanogenmod 10.2.
I deleted the rom so can't help you with the link.
Any cyanogenmod rom should work..
try thr latest build..
---> http://forum.xda-developers.com/showpost.php?p=50766295&postcount=1001
Hello I have a Samsung Galaxy Tab 2 7.0 It has been experiencing A problem like yours it has been stuck on the "Samsung galaxy tab" screen i read that you should wide all data so i did.. And i read to flash it back to the last rom. i made mine in custa the usb debugging was turned off.om i was trying to put it into stock rom when i encountered the problem. Then when i put it in download mode i was wondering why it can't be detected i realized that because i wiped all data the usb debugging was turned off so. there was no way to flash it back using odin PLEASE help me my tablet version is GT-P3100XXLH2 the fixed one so it has no way to remove the battery the only way was via screws but we don't have the same size PLease healp it's been like this since yesterday
LBGS said:
Hello I have a Samsung Galaxy Tab 2 7.0 It has been experiencing A problem like yours it has been stuck on the "Samsung galaxy tab" screen i read that you should wide all data so i did.. And i read to flash it back to the last rom. i made mine in custa the usb debugging was turned off.om i was trying to put it into stock rom when i encountered the problem. Then when i put it in download mode i was wondering why it can't be detected i realized that because i wiped all data the usb debugging was turned off so. there was no way to flash it back using odin PLEASE help me my tablet version is GT-P3100XXLH2 the fixed one so it has no way to remove the battery the only way was via screws but we don't have the same size PLease healp it's been like this since yesterday
Click to expand...
Click to collapse
Wipe data and install a touchwiz based rom first. I had the same problem and it is a problem of the bootloader.
Then flash twrp using odin.
Once i flashed twrp, all roms work perfect on my tab 2.
Hope that helped.
Sent from my Galaxy S7 edge using XDA-Developers mobile app
can you tell me step by step pls. i'm just a kid btw
dev.kasibhatla said:
Wipe data and install a touchwiz based rom first. I had the same problem and it is a problem of the bootloader.
Then flash twrp using odin.
Once i flashed twrp, all roms work perfect on my tab 2.
Hope that helped.
Sent from my Galaxy S7 edge using XDA-Developers mobile app
Click to expand...
Click to collapse
Tell me step by step pls. i don't know how to do this properly i'm just a kid.
Related
Hi,
My Galaxy 3 suddenly stopped booting up (continuously shows Samsung logo) so I have decided to go for below options:
1. Install a custom rom (FROYO - http://forum.xda-developers.com/showthread.php?t=1037459).
2. Steps to do that are given in above mentioned link. But do I need to root my device before doing that?
3. Go to samsung service center.
Have you encountered this problem this before, what would you suggest me?
instal custom ROM first.
Sent from my GT-I5800 using xda premium
Can you access recovery or download mode?
Sent from my GT-S5830 using xda app-developers app
jumper62 said:
Can you access recovery or download mode?
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
Guys, Sorry for the late response.
I am able to access download mode but not recovery mode.
And I tried to install custom Rom (Froyo - ATROM20-I5801DDJP2.tar) but with no success. I used ODIN (apollo_0531.ops). The status in ODIN showed passed after approx 6 min and my phone rebooted twice during the process. The second time my phone rebooted and it seems to be hung during booting (It constantly displayed Samsung Logo endlessly).
Then I installed G3MOD kernel. After rebooting it opens G3MOD screen, the loading icon of G3MOD goes 100% but it gets stuck there.
Again I installed above mentioned custom rom but it shows the Samsung logo endlessly during booting.
My Question now is:
1. Do I need to root my phone first? ( I read that by using ODIN you do not need to do that separately)
2. As I mentioned I am not able to go to recovery mode(Vol button up and down both+Power+Home). Is there a problem with my phone. Were you able to do this?
3. What should I do next.
alokjadhav said:
Guys, Sorry for the late response.
I am able to access download mode but not recovery mode.
And I tried to install custom Rom (Froyo - ATROM20-I5801DDJP2.tar) but with no success. I used ODIN (apollo_0531.ops). The status in ODIN showed passed after approx 6 min and my phone rebooted twice during the process. The second time my phone rebooted and it seems to be hung during booting (It constantly displayed Samsung Logo endlessly).
Then I installed G3MOD kernel. After rebooting it opens G3MOD screen, the loading icon of G3MOD goes 100% but it gets stuck there.
Again I installed above mentioned custom rom but it shows the Samsung logo endlessly during booting.
My Question now is:
1. Do I need to root my phone first? ( I read that by using ODIN you do not need to do that separately)
2. As I mentioned I am not able to go to recovery mode(Vol button up and down both+Power+Home). Is there a problem with my phone. Were you able to do this?
3. What should I do next.
Click to expand...
Click to collapse
Why do you want to install custom firmware? It would be better to install (with Odin) stock samsung ecalir or froyo firmware, particulary if you plan to go to Samsung service center.
Rooting your phone wont help to resolve your situation.
If you are not able to access recovery mode, then there must be internal problem. Better go to Samsung Care. Or I wonder there is hard reset for SG3?
Thanks
Antibot said:
If you are not able to access recovery mode, then there must be internal problem. Better go to Samsung Care. Or I wonder there is hard reset for SG3?
Click to expand...
Click to collapse
I went to service center and they installed Froyo :victory:. I am wondering how did they do that when the recovery mode option was not showing up?
Anyways thank you guys for you suggestions :good:. One thing I noticed is that the Hindi fonts are not recognizable . Do you know how to resolve this? I read that rooting is required? is this correct?
Well I'm afraid I can't help you about Hindi fonts. But I was wondering how they solve this kind of issues where recovery itself is inaccessible?
Hi! Today i tried to update the i9003L of my brother's girlfriend. Ive gad RemICS 4.0.4, wiped data and then flashed RemICS JB. But when its mostly complete, the phone goes off and then automatically turned on. I get a bootloop at the animation. I cant even enter to recovery and flash gapps but still can i enter to the download mode. So i've downloaded a 2.3.6 gingerbread (i dont remember the buold but it starts with UB, from argentina my country) and flashed from odin, it says flash and the phone reboots, but i still have the bootloop problem in samsung logo animation. I dont think i ve messed the sd card because when i flashed the stock rom apears a yellow letters saying wiping data and wiping cache, and i didnt have any error (i guess). I cant enter stock recovery because when i press the vol up home and power button the screen fades to black and then reboots. Please help me, tomorrow i will flash cf root to see whats happening and if my sd card isnt f*cked up i will flash RemICS 4.0.4 again. Thats correct or i need to go back froyo? Please help! Sorry my bad english
You should have noticed that i9003L is not same as i9003, they didn't share same firmware if I'm not mistaken as I found different official firmware for both.
Hey? Sorry but its my first time hearing i9003L and googled it. I think its i9003 our phone. Hold volume first, then HOME button, then last the power. If it reboots to recovery, ur just fine.
Found some information about i9003L in Chile Samsung website.
Based on the site, it's called Samsung Galaxy S Latona
The specs are the same but I'm not sure you can directly flash i9003 rom without some modification.
You can try flashing with kpe+pit first if you can enter download mode.
Beware that in our rom, the build prop stated i9003, I'm not sure whether it will cause trouble in your phone.
alex88510 said:
Found some information about i9003L in Chile Samsung website.
Based on the site, it's called Samsung Galaxy S Latona
Click to expand...
Click to collapse
I9003 use latona. Also googled it, its the same as our device.
Okay, about the fade to black when opening stock recovery,
After holding the power+home+vol up, when the phone boots, you have to release the power button but don't release the two buttons yet until the recovery is opened.
Sent by my Galaxy $
---------- Post added at 07:19 AM ---------- Previous post was at 07:06 AM ----------
Open the recovery using steps I said just now, wipe data/cache.
Download firmware XXKPE.
Use Odin v1.8x (not odin 4.x), place latona.pit as pit file, tick the check box repartition. place phone in download mode and plug it in. Start the flash.
After it says pass, unplug and remove battery and place the battery back.
Plug it back in download mode,
Put other files of KPE (Phone, Pda, Boot) and flash. The phone reboots itself.
Also using Odin,
place the Gingerbread firmware on PDA, put the phone in download mode, connect to pc and press start. After a while the yellow/green(whatever color it is) square in odin will show "PASS" and the phone reboots itself. You can unplug the phone.
Poof! The phone is now functional.
Sent by my Galaxy $
Thank you! I had the same problem yesterday and your tips make my phone working
Wysłano z Galaxy S I9003
Brociu12 said:
Thank you! I had the same problem yesterday and your tips make my phone working
Wysłano z Galaxy S I9003
Click to expand...
Click to collapse
what an coincidence me too have an same problem... i had an feeling like going 2 be dead...
Thank you! I had the same problem yesterday and your tips make my phone working
Wysłano z Galaxy S I9003
Click to expand...
Click to collapse
Good to hear that.
Sent by my Galaxy $
Hi! Thanks! i fixed the phone (uff...), first i tried to go to stock GB, flashed ok and ODIN sayed "PASS", but i have a bootloop again, so flashed CF-Root and i have the screen fading to black again, but, thanks for the advice, ive pressed Power, Home and volume up, and then stop pressing Power, and then the recovery appears!! Wiped everything and i've flashed the RemICS 4.0.4, rebooted and works! i cant belive the phone is working again!. Thanks for the support.
And yes, the i9003L and i9003 are the same phone, the "L" means it has a diferent modem, but the specs are the same and their roms are also the same. Also The L or Latona is for "Latin America"/Latinoamérica. So thanks again and sorry for my bad english!
Re: [Q] Reflashing I9003
Sent from my GT-I9003 using xda app-developers app.
Sent from my GT-I9003 using xda app-developers app
Good evening everyone.
I bought Samsung galaxy tab 7.7 GT-P6800 about month ago. It's been working fine, till this saturday. When i tried to unlock my Tab, device didn't respond. I tried to power it on, but still no response. Hm, the reason of this thing is only one - too low battery. So, i putted my device on charge (saw battery icon on screen). After 2 hours, I came back and tried to power my device again, but it freezed with this battery icon. I hold power button for 10-15 seconds and my device started to load, but it got freezed on "Samsung Galaxy Tab 7.7". My Tab is rooted, but firmware is official.
What my DEVICE CAN'T DO:
* Can't load into CWM (freezing at "Samsung Galaxy Tab 7.7";
* Can't Power on;
* Can't charge;
* Can't connect to PC.
What my DEVICE CAN DO:
* Load into Downloading mode.
Is it possible to restore my Tab? If yes, how to do it, using Downloading mode (Kies doesn't see my tab)? Please help.
Thanks for your help.
Mrakoris/ said:
Good evening everyone.
I bought Samsung galaxy tab 7.7 GT-P6800 about month ago. It's been working fine, till this saturday. When i tried to unlock my Tab, device didn't respond. I tried to power it on, but still no response. Hm, the reason of this thing is only one - too low battery. So, i putted my device on charge (saw battery icon on screen). After 2 hours, I came back and tried to power my device again, but it freezed with this battery icon. I hold power button for 10-15 seconds and my device started to load, but it got freezed on "Samsung Galaxy Tab 7.7". My Tab is rooted, but firmware is official.
What my DEVICE CAN'T DO:
* Can't load into CWM (freezing at "Samsung Galaxy Tab 7.7";
* Can't Power on;
* Can't charge;
* Can't connect to PC.
What my DEVICE CAN DO:
* Load into Downloading mode.
Is it possible to restore my Tab? If yes, how to do it, using Downloading mode (Kies doesn't see my tab)? Please help.
Thanks for your help.
Click to expand...
Click to collapse
You can flash new rom via pc odin if you can go to download mode. I would suggest go over this thread first http://forum.xda-developers.com/showthread.php?t=1469635
cakrabayu said:
You can flash new rom via pc odin if you can go to download mode. I would suggest go over this thread first http://forum.xda-developers.com/showthread.php?t=1469635
Click to expand...
Click to collapse
Thanks.
I restored my Tab to original firmware, but still freezing at "Samsung Galaxy tab 7.7".
Mrakoris/ said:
Thanks.
I restored my Tab to original firmware, but still freezing at "Samsung Galaxy tab 7.7".
Click to expand...
Click to collapse
I feel sorry about that. Do you clean install your ROM? If you can now go to CWM Recovery, then it would be good. You can try factory reset in CWM.
I had the same issue this is when the flashed Rom is damaged.You need to install the originap Samsung Rom which can be bought from samsung or give your tab to a repair shop they will have the neccery things.
Sent from my GT-N7100 using xda app-developers app
you need to make factory reset using cwm recovery... If you reinstall the Official Honeycomb firmware... you are safe to wipe using the stock 3e recovery... if you are on ICS... please go to download mode and install cwm... then factory reset...
edan1979 said:
you need to make factory reset using cwm recovery... If you reinstall the Official Honeycomb firmware... you are safe to wipe using the stock 3e recovery... if you are on ICS... please go to download mode and install cwm... then factory reset...
Click to expand...
Click to collapse
Hey,
Thanks for your reply!
I flashed my SGT 7.7 back to Official Honeycomb firmware, but i still can't access recovery mode. The only thing i can do is - load into download mode. I can't install CWM, because i flashed it to NON rooted Official firmware. It's still like a brick
Any other suggestions?
Thanks!
how did you try to enter the recovery mode? what key combination that you press...
Mrakoris/ said:
Hey,
Thanks for your reply!
I flashed my SGT 7.7 back to Official Honeycomb firmware, but i still can't access recovery mode. The only thing i can do is - load into download mode. I can't install CWM, because i flashed it to NON rooted Official firmware. It's still like a brick
Any other suggestions?
Thanks!
Click to expand...
Click to collapse
Isnt it possible to flash CWM without rooting first??
If I remember correctly.... Go into download mode... using Odin and flash CWM....
if you get that..... then try to re=boot into recovery and wipe away if your on HC...
good luck
edan1979 said:
how did you try to enter the recovery mode? what key combination that you press...
Click to expand...
Click to collapse
Power + Volume Up buttons.
jimmbomb said:
Isnt it possible to flash CWM without rooting first??
If I remember correctly.... Go into download mode... using Odin and flash CWM....
if you get that..... then try to re=boot into recovery and wipe away if your on HC...
good luck
Click to expand...
Click to collapse
Flashed CWM using Odin, but still can't access anything. I can only see two loading screens:
1. Freezing battery icon. (it happens, when i try to charge my tablet)
2. Freezing Samsung Galaxy Tab 7.7 sign.(it happens, when i just try to power my device on)
The only way I can power off my tablet is to wait untill my device's battery discharges.
I'm in the same situation:
1. Freezing battery icon. (it happens, when i try to charge my tablet)
2. Freezing Samsung Galaxy Tab 7.7 sign.(it happens, when i just try to power my device on)
Although I can boot into CWM 5.0.2.7 but I'm unable to successfully get a rom to work...
Very frustrating isn't it.
I'm thinking about trying this...
http://forum.xda-developers.com/showthread.php?t=1667886
ianmere said:
I'm in the same situation:
1. Freezing battery icon. (it happens, when i try to charge my tablet)
2. Freezing Samsung Galaxy Tab 7.7 sign.(it happens, when i just try to power my device on)
Although I can boot into CWM 5.0.2.7 but I'm unable to successfully get a rom to work...
Very frustrating isn't it.
I'm thinking about trying this...
http://forum.xda-developers.com/showthread.php?t=1667886
Click to expand...
Click to collapse
Heh, that's true. If anything will help you to make your device alive again, please tell me. Because I really have no idea what to do. Tried everything...
Thanks.
Mrakoris/ said:
Heh, that's true. If anything will help you to make your device alive again, please tell me. Because I really have no idea what to do. Tried everything...
Thanks.
Click to expand...
Click to collapse
OK, I went through the following guide
http://forum.xda-developers.com/showthread.php?t=1862294
And it really worked!!! it takes a while, you will need to put aside around 1-2 hours to go through it carefully step by step.
I flashed CWM using odin first.
ianmere said:
OK, I went through the following guide
http://forum.xda-developers.com/showthread.php?t=1862294
And it really worked!!! it takes a while, you will need to put aside around 1-2 hours to go through it carefully step by step.
I flashed CWM using odin first.
Click to expand...
Click to collapse
What firmware were you using on your tablet, while you were flashing CWM? Why I am asking it, is because i tried lots of different firmwares to install CWM and i couldn't boot into CWM niether with honeycomb, nor with ICS. And yeah thanks for your help.
Mrakoris/ said:
What firmware were you using on your tablet, while you were flashing CWM? Why I am asking it, is because i tried lots of different firmwares to install CWM and i couldn't boot into CWM niether with honeycomb, nor with ICS. And yeah thanks for your help.
Click to expand...
Click to collapse
I started with ICS stock but after my initial flash did't work I believe I wasn't really running any rom because it didn't work.
I then went into Odin/download mode (holding volume down and power).
once in I used the cwm-6.0.2.3-p6800.tar file and loaded it under "Bootloader" then I flashed that successfully.
to then get into recovery I hold Volume up + power (for a very long time about 20secs).
Once in recovery then you can begin the above guide to repair the sdcard.
Hope that helps.
Thanks again for your reply.
I did exactly everything you wrote, even installed original ICS firmware again using Odin. Flashed recovery, hold Power + Vol Up buttons for like 5 minutes, but f*** this, still didn't boot into recovery. Erh.. my device is broken forever.. No solution for all this..
Mrakoris/ said:
What my DEVICE CAN'T DO:
* Can't load into CWM (freezing at "Samsung Galaxy Tab 7.7";
* Can't Power on;
* Can't charge;
* Can't connect to PC.
What my DEVICE CAN DO:
* Load into Downloading mode.
Click to expand...
Click to collapse
I'm in the same situation as Mrakoris, expect that I was in CM 10 and flashed to CM 10.1 before I got a brick.
cakrabayu said:
You can flash new rom via pc odin if you can go to download mode. I would suggest go over this thread first http://forum.xda-developers.com/showthread.php?t=1469635
Click to expand...
Click to collapse
I had a look at that topic but I'd rather try to get to CWM first just to wipe data/cache partitions.
Mrakoris/ said:
Flashed CWM using Odin, but still can't access anything. I can only see two loading screens:
1. Freezing battery icon. (it happens, when i try to charge my tablet)
2. Freezing Samsung Galaxy Tab 7.7 sign.(it happens, when i just try to power my device on)
The only way I can power off my tablet is to wait untill my device's battery discharges.
Click to expand...
Click to collapse
ianmere said:
OK, I went through the following guide
http://forum.xda-developers.com/showthread.php?t=1862294
And it really worked!!! it takes a while, you will need to put aside around 1-2 hours to go through it carefully step by step.
I flashed CWM using odin first.
Click to expand...
Click to collapse
How do you flash CWM using ODIN? CWM isn't a Bootloader, nor a PDA, nor a Phone, nor a CSC.
Thanks in advance, hope I'll get back my Galaxy Tab 7.7!
1. go to download mode
2. connect your device to your pc and start odin
3. put the cwm files on phone section of odin
4. flash awayyyyy....
Yay
Yaaaaay! Problem solved! My Samsung Galaxy Tab 7.7. P6800 is alive again!
The problem was so easy, that i laught alot, when solved it. The problem was with micro SDcard. I used micro SDcard from my last Nokia phone, but Nokia's micro SDcard didn't approach to SGT7.7, but it approached ONLY by the size! So I used another micro SDcard, which I got when I bougt my Tab! Woohoo, i'm so happy now :laugh:
Hey, I have Samsung Galaxy y Duos S6102 and I accidentally flashed it with GT-S5360 stock ROM. (I wanted to flash with S6102 but i was sleepy and downloaded the wrong file and so on.) After that my screen turned white and I couldn't do nothing.So i searched for help and found this http://forum.xda-developers.com/showthread.php?t=1989265 Did everything as it said and Odin flash was successful. But then the White screen started flashing (black-white-black-white-...-reboot-white-black-white and so on) And I dont know what to do..
In odin i flashed 3 files PDA;Phone;CSC. But not PIT or Bootloader.
Please Help, I really dont want to go meet the "expert" in Samsung.
LocDog39 said:
Hey, I have Samsung Galaxy y Duos S6102 and I accidentally flashed it with GT-S5360 stock ROM. (I wanted to flash with S6102 but i was sleepy and downloaded the wrong file and so on.) After that my screen turned white and I couldn't do nothing.So i searched for help and found this http://forum.xda-developers.com/showthread.php?t=1989265 Did everything as it said and Odin flash was successful. But then the White screen started flashing (black-white-black-white-...-reboot-white-black-white and so on) And I dont know what to do..
In odin i flashed 3 files PDA;Phone;CSC. But not PIT or Bootloader.
Please Help, I really dont want to go meet the "expert" in Samsung.
Click to expand...
Click to collapse
Try wiping data & cache before and after the odin flash through recovery mode (three button combo of "volume up+home+power")
It may help u i think:sly:
Sent from GT-S6102
Rom: Technoduos 1.5 (customized)
Kernel: Iduos v1.3
parkourkarthik said:
Try wiping data & cache before and after the odin flash through recovery mode (three button combo of "volume up+home+power")
It may help u i think:sly:
Sent from GT-S6102
Rom: Technoduos 1.5 (customized)
Kernel: Iduos v1.3
Click to expand...
Click to collapse
Can't do that because my screen is white...
Okay.. Got it working Because of this http://forum.xda-developers.com/showthread.php?t=1600373&page=6 post #57
Thanks
i have big problem...cause i cant go to download mode at all or to recovery mode.
I flashed not the right one firmware so now my gt6102 is on WHITE SCREEN. I used jig usb but still nothing only white screen. I tried through odin to flash again but still the :crying: white screen.
i cant see my download mode... whatever i tried to do. Is there any solution???
zaf_4 said:
i have big problem...cause i cant go to download mode at all or to recovery mode.
I flashed not the right one firmware so now my gt6102 is on WHITE SCREEN. I used jig usb but still nothing only white screen. I tried through odin to flash again but still the :crying: white screen.
i cant see my download mode... whatever i tried to do. Is there any solution???
Click to expand...
Click to collapse
Just try.,.,.,. I just flashed s5360 which is white screen and i flashed successfully. So what is my trick? When white screen occurs, remove the battery then enter into download mode. Odin will detect automatically while it's white screen.,.,. So I flashed the s6102 , then it works! I was going to be able to throw my galaxy y because i find any solutions, then i share over there.,.,. :good: :highfive: :victory:
HEY guyzz hope this site will be helpful,
first of all i have a samsung galaxy tab 2 (p5100), i have recently installed cyanogenmod 10 on my tab. when installing cyanogenmod i faced a problem of stucking on the boot loop of cyanogenmod but i solved it by getting in recovery mode and wiping cache and wiping data/factory reset, after then i wanted to have google apps in my tab as installed cyanogenmod does not have google apps. i downloaded google apps pack from net and installed it by the same way i have installed cyanogenmod but when after it rebooted my TAB and wizard touch setup keeps crashes. then, i get into recovery and again wiped data/factory reset. then again rebooted and it crashed again the worst thing is that i cant go to my homescreen or to the apps drawer then, i downloaded cyanogenmod nightly and send it to my tab and try to install it by going in recovery but i cant install it. then i get to the advanced and formatted user data, and rebooted after then my tab always stuck on the the logo screen on the logo sreen it said: Samsung Galaxy Tab 2. Now, i cant go to recovery nor in the download mode. PLZZ HELP ME HOPE I WILL GET THE SOLUTION VERY FAST.....
ashuto said:
HEY guyzz hope this site will be helpful,
first of all i have a samsung galaxy tab 2 (p5100), i have recently installed cyanogenmod 10 on my tab. when installing cyanogenmod i faced a problem of stucking on the boot loop of cyanogenmod but i solved it by getting in recovery mode and wiping cache and wiping data/factory reset, after then i wanted to have google apps in my tab as installed cyanogenmod does not have google apps. i downloaded google apps pack from net and installed it by the same way i have installed cyanogenmod but when after it rebooted my TAB and wizard touch setup keeps crashes. then, i get into recovery and again wiped data/factory reset. then again rebooted and it crashed again the worst thing is that i cant go to my homescreen or to the apps drawer then, i downloaded cyanogenmod nightly and send it to my tab and try to install it by going in recovery but i cant install it. then i get to the advanced and formatted user data, and rebooted after then my tab always stuck on the the logo screen on the logo sreen it said: Samsung Galaxy Tab 2. Now, i cant go to recovery nor in the download mode. PLZZ HELP ME HOPE I WILL GET THE SOLUTION VERY FAST.....
Click to expand...
Click to collapse
You may probably think it is the gapps that has some problems, but actually its your ROM's issue.
my friend has a htc desire z and he tried a lots of version of gapps and ROMs in many combinations and what happened is-
AOSB ROM without gapps = perfect!
AOSB ROM with any version of gapps = bootloop
any other ROM with or without any version of gapps = perfect!
So i can include, his AOSB ROM as well as your ROM has issues!
Try using another one!
cant go into recovery mode nor in download mode
samsungrockz said:
You may probably think it is the gapps that has some problems, but actually its your ROM's issue.
my friend has a htc desire z and he tried a lots of version of gapps and ROMs in many combinations and what happened is-
AOSB ROM without gapps = perfect!
AOSB ROM with any version of gapps = bootloop
any other ROM with or without any version of gapps = perfect![/COLOR
So i can include, his AOSB ROM as well as your ROM has issues!
Try using another one!
Click to expand...
Click to collapse
Thx for the advise and i also undrstand what u r trying to say but tell me how i intall a new rom as i cant go in recovery nor in download mode hope u will reply fast and give me a suitable and best answer....thx anyway
What happens when you try to turn it on in download mode, by pressing power+volume down, what happens?? Does a "firmware error" shows up?
If nothing happens like i told above, keep your tab on untill the battery dies then connect it to charger and you might be lucky to get into download mode
samsungrockz said:
What happens when you try to turn it on in download mode, by pressing power+volume down, what happens?? Does a "firmware error" shows up?
If nothing happens like i told above, keep your tab on untill the battery dies then connect it to charger and you might be lucky to get into download mode
Click to expand...
Click to collapse
thx, but i cant go in download mode as download mode comes after the screen which says : Samsung Galaxy Tab 2. and i get stuck on this screen only so how can i get to the download mode or in recovery mode as per ur instruction i hav drained my tab battery and plugged it for charging what to do next??. one more thing i want to say is when i plugged my tab the charging sign appear but it was not the original sign of samsung it was the sign of cyanogenmod so i think cyanogenmod not has any issues.....or whatever i dont know much bout androids....plzz help waiting for ur fast and best reply hope u will post a exellent result at last.....PLZZ HELP
Sorry but seems i can no longer help you. If you could get into download mode somehow, things would be much easier.
For now, i can just recommend you visit a cyanogenmod forum , they can help you for sure.
Or you can take it to nearby samsung store, anyways.
samsungrockz said:
Sorry but seems i can no longer help you. If you could get into download mode somehow, things would be much easier.
For now, i can just recommend you visit a cyanogenmod forum , they can help you for sure.
Or you can take it to nearby samsung store, anyways.
Click to expand...
Click to collapse
thx buddy anyway, thx for ur advises if u can plzz tell me how i get into download mode somehow any tweaks u know ?? it would be grt if u help....
Well i don't know any other process to boot into download mode other than pressing and holding the volume down and power button for 7-8 seconds! Then a red traingle appers, continue by pressing volume up ! I don't know any other method! Sorry
samsungrockz said:
Well i don't know any other process to boot into download mode other than pressing and holding the volume down and power button for 7-8 seconds! Then a red traingle appers, continue by pressing volume up ! I don't know any other method! Sorry
Click to expand...
Click to collapse
plzz any other way u know or plzz suggest me wat prob had occured in my tab
magicly entered in download mode
yay entered im download mode wat to do next help me fast
Great!! now that you've entered download mode, first install Odin in your pc, connect your tab with usb cable and see if odin can detect your phone.
Now download the official firmware of your tab 2, p5100 from http://www.sammobile.com/ (download the firmware compatible in your country and flash it via odin.
Use google search to get detailed description of how to use odin, Best of luck
ashuto said:
yay entered im download mode wat to do next help me fast
Click to expand...
Click to collapse
Flash stock rom for your device, downloaded from sammobile.com. Use Odin to flash.
Can u guys please tell me some download links my device info. is : Samsung Galaxy Tab 2 (GT5100) i can't find links plzz help:angel:
Get it here >> http://live.samsung-updates.com/index.php?device=GT-P5100 choose the country you live in and download!
thx for ur support and special thx to xda forums
Thx guys for ur grt support and motivation I'm drifting this reply with my Samsung galaxy tab 2 p5100 with CyanogenMod 10.1.3. I solved this matter by finding my originally cm10.zip and installed it by going in recovery mode. However u guys helped me a lot by giving or motivation. I gaved up when I can't go in recovery mode but samsung rockz motivated me and I tried and zooooom the recovery opened thx for or support samsungrockz:good::fingers-crossed::angel:::victory::highfive::angel::angel::angel::angel::angel::angel:
ashuto said:
Thx guys for ur grt support and motivation I'm drifting this reply with my Samsung galaxy tab 2 p5100 with CyanogenMod 10.1.3. I solved this matter by finding my originally cm10.zip and installed it by going in recovery mode. However u guys helped me a lot by giving or motivation. I gaved up when I can't go in recovery mode but samsung rockz motivated me and I tried and zooooom the recovery opened thx for or support samsungrockz:good::fingers-crossed::angel:::victory::highfive::angel::angel::angel::angel::angel::angel:
Click to expand...
Click to collapse
Wow feels good that your tablet has been fixed happy to help never give up on something