Database Info

Galaxy Tab 7.0 Plus GT-P6200 hang logo.

i have one Samsung Galaxy Tap GT-P6200 hang in logo.Please tell me how to flash this phone with Odin or show me the produce.thanks

jimmymobile said:
i have one Samsung Galaxy Tap GT-P6200 hang in logo.Please tell me how to flash this phone with Odin or show me the produce.thanks
Click to expand...
Click to collapse
Wrong section.
Please re-explain what you mean. Are you bricked? Use better English please.

Thread moved to General.

I also have this problem. My tab got drained so when I got home, I plugged in the charger to the tab. Then I pressed the power button. So the tab opened but it hangs when the SAMSUNG logo is on the screen. I tried to wait it out for around 10mins but nothing happened, it remained in the SAMSUNG logo. So I tried holding the power button for 15secs to reboot but when it rebooted, the tab still hangs in the SAMSUNG logo.
Please help. I just bought this tab 3days ago. It is not rooted and so far I have installed only around 10 apps and games all from the market. Im not sure what caused this problem.

check in the development section under official firmwares post. there are official firmwares and instructions for odin. try to charge up battery as much as possible. a failed Odin flash could be a perma-brick. If you have Kies , I think there is an emergency software recovery option as well.

chrisrotolo said:
check in the development section under official firmwares post. there are official firmwares and instructions for odin. try to charge up battery as much as possible. a failed Odin flash could be a perma-brick. If you have Kies , I think there is an emergency software recovery option as well.
Click to expand...
Click to collapse
thanks for the reply dude. so im gonna have to flash this tab. i checked the instructions and all is good except for the ROM to use. there are 2 ROMs posted for the P6200. Im not sure which one i should use. I bought my tab here in Manila. All i know is that its a P6200 3g tab. Could i just pick anyone from the two?

The KK5 is the original firmware that the p-6200 came with . If you install that, as soon as you run it, it should be giving you the notification that an update is available . There will be 2 incremental upgrades and you will end up with KL1.
Or you can directly download the KL1 .
P_

pakalrtb said:
The KK5 is the original firmware that the p-6200 came with . If you install that, as soon as you run it, it should be giving you the notification that an update is available . There will be 2 incremental upgrades and you will end up with KL1.
Or you can directly download the KL1 .
P_
Click to expand...
Click to collapse
thanks dude! anyway im still thinking if i should flash this now or just bring it to Samsung for service. im afraid that if i flashed this, Samsung might say that ive been tinkering with it.

Before venturing yourself into flashing the stock rom why don't you try a factory reset from the recovery menu :
Turn off the tablet
Press at the same time the power button and the volume up button
As soon as you see the galaxy logo release the power button but keep the volume up pressed until the recovery menu pop up
Select the factory reset option using the volume button and confirm with the power button
I am pretty sure that it will fix your problem
Let me know how it goes
P_

pakalrtb said:
Before venturing yourself into flashing the stock rom why don't you try a factory reset from the recovery menu :
Turn off the tablet
Press at the same time the power button and the volume up button
As soon as you see the galaxy logo release the power button but keep the volume up pressed until the recovery menu pop up
Select the factory reset option using the volume button and confirm with the power button
I am pretty sure that it will fix your problem
Let me know how it goes
P_
Click to expand...
Click to collapse
thanks dude!! the problem was fixed after the factory reset.
im still wondering though what caused the problem. ill probably try draining the battery again to see if this problem reoccurs.
thanks again!!!

successfully done p 6200

Hi all. I've had the same problem last month. My P6200's battery got drained and was kind of in a boot loop. I didn't know how to do a factory reset then so I looked online for a Samsung Service Center here in the Philippines. I was advised that my device was not covered by International Warranty as I bought it outside of the Philippines (I got mine in India) as only Samsung cameras have have international coverage. The guy still tried to flash it, however, it did not fix the problem. Now it just boot loops to the Samsung Galaxy Tab 7.0 Plus and does not reach the Samsung logo that it used to go to after that.
I'm trying to reset my tab but pressing and holding the power and volume up buttons don't work. Please advise what I can do. I don't want this device to go to waste.
Many Thanks!

ive also had the same problem duno wut to do anymore

Had bootloop problem too
Download Odin and the appropriate firmware for your region then flash it via Odin(turn off tab,press volum down and power until you go in download mode then connect the tab to pc,click pda on Odin,click start,wait to flash)
Good luck

i had the same problem before, when i restart my tab, it was stuck at samsung logo, i wait for 15m but still the same and then i connect to my laptop.
amazingly, kies can detect my tab, so i did backup, suddenly samsung logo disappeared and enter homescreen. maybe around 15m more after i connect to my laptop.
my suspect was the ADW laucher because there's no problem before i installed adw launcher and set it as default launcher.

Try clearing dalvik cache from recovery ....worked for me....please keep it as a personal opinion....search threads for better solutions....try this if nothing works...
Sent from my GT-P6200 using Tapatalk 2

gudbud said:
Try clearing dalvik cache from recovery ....worked for me....please keep it as a personal opinion....search threads for better solutions....try this if nothing works...
Sent from my GT-P6200 using Tapatalk 2
Click to expand...
Click to collapse
Not sure if trolling or not reading dates... The last post in this thread is from May...
Sent from my myTouch 4g via Tapatalk

i tried factory reset so many time but still stuck..my problem now is it keep rebooting after flashing 3.2 HC..anybody please

Same
jerung16 said:
i tried factory reset so many time but still stuck..my problem now is it keep rebooting after flashing 3.2 HC..anybody please
Click to expand...
Click to collapse
SAME!!!

CLink08 said:
SAME!!!
Click to expand...
Click to collapse
New here? If you are on HC.. enter recovery then wipe cache and partition.. you're welcome
Sent from my GT-P6200 using XDA Premium HD app

[Q] Brick forever or possibility to restore?

Good evening everyone.
I bought Samsung galaxy tab 7.7 GT-P6800 about month ago. It's been working fine, till this saturday. When i tried to unlock my Tab, device didn't respond. I tried to power it on, but still no response. Hm, the reason of this thing is only one - too low battery. So, i putted my device on charge (saw battery icon on screen). After 2 hours, I came back and tried to power my device again, but it freezed with this battery icon. I hold power button for 10-15 seconds and my device started to load, but it got freezed on "Samsung Galaxy Tab 7.7". My Tab is rooted, but firmware is official.
What my DEVICE CAN'T DO:
* Can't load into CWM (freezing at "Samsung Galaxy Tab 7.7";
* Can't Power on;
* Can't charge;
* Can't connect to PC.
What my DEVICE CAN DO:
* Load into Downloading mode.
Is it possible to restore my Tab? If yes, how to do it, using Downloading mode (Kies doesn't see my tab)? Please help.
Thanks for your help.

Mrakoris/ said:
Good evening everyone.
I bought Samsung galaxy tab 7.7 GT-P6800 about month ago. It's been working fine, till this saturday. When i tried to unlock my Tab, device didn't respond. I tried to power it on, but still no response. Hm, the reason of this thing is only one - too low battery. So, i putted my device on charge (saw battery icon on screen). After 2 hours, I came back and tried to power my device again, but it freezed with this battery icon. I hold power button for 10-15 seconds and my device started to load, but it got freezed on "Samsung Galaxy Tab 7.7". My Tab is rooted, but firmware is official.
What my DEVICE CAN'T DO:
* Can't load into CWM (freezing at "Samsung Galaxy Tab 7.7";
* Can't Power on;
* Can't charge;
* Can't connect to PC.
What my DEVICE CAN DO:
* Load into Downloading mode.
Is it possible to restore my Tab? If yes, how to do it, using Downloading mode (Kies doesn't see my tab)? Please help.
Thanks for your help.
Click to expand...
Click to collapse
You can flash new rom via pc odin if you can go to download mode. I would suggest go over this thread first http://forum.xda-developers.com/showthread.php?t=1469635

cakrabayu said:
You can flash new rom via pc odin if you can go to download mode. I would suggest go over this thread first http://forum.xda-developers.com/showthread.php?t=1469635
Click to expand...
Click to collapse
Thanks.
I restored my Tab to original firmware, but still freezing at "Samsung Galaxy tab 7.7".

Mrakoris/ said:
Thanks.
I restored my Tab to original firmware, but still freezing at "Samsung Galaxy tab 7.7".
Click to expand...
Click to collapse
I feel sorry about that. Do you clean install your ROM? If you can now go to CWM Recovery, then it would be good. You can try factory reset in CWM.

I had the same issue this is when the flashed Rom is damaged.You need to install the originap Samsung Rom which can be bought from samsung or give your tab to a repair shop they will have the neccery things.
Sent from my GT-N7100 using xda app-developers app

you need to make factory reset using cwm recovery... If you reinstall the Official Honeycomb firmware... you are safe to wipe using the stock 3e recovery... if you are on ICS... please go to download mode and install cwm... then factory reset...

edan1979 said:
you need to make factory reset using cwm recovery... If you reinstall the Official Honeycomb firmware... you are safe to wipe using the stock 3e recovery... if you are on ICS... please go to download mode and install cwm... then factory reset...
Click to expand...
Click to collapse
Hey,
Thanks for your reply!
I flashed my SGT 7.7 back to Official Honeycomb firmware, but i still can't access recovery mode. The only thing i can do is - load into download mode. I can't install CWM, because i flashed it to NON rooted Official firmware. It's still like a brick
Any other suggestions?
Thanks!

how did you try to enter the recovery mode? what key combination that you press...

Mrakoris/ said:
Hey,
Thanks for your reply!
I flashed my SGT 7.7 back to Official Honeycomb firmware, but i still can't access recovery mode. The only thing i can do is - load into download mode. I can't install CWM, because i flashed it to NON rooted Official firmware. It's still like a brick
Any other suggestions?
Thanks!
Click to expand...
Click to collapse
Isnt it possible to flash CWM without rooting first??
If I remember correctly.... Go into download mode... using Odin and flash CWM....
if you get that..... then try to re=boot into recovery and wipe away if your on HC...
good luck

edan1979 said:
how did you try to enter the recovery mode? what key combination that you press...
Click to expand...
Click to collapse
Power + Volume Up buttons.

jimmbomb said:
Isnt it possible to flash CWM without rooting first??
If I remember correctly.... Go into download mode... using Odin and flash CWM....
if you get that..... then try to re=boot into recovery and wipe away if your on HC...
good luck
Click to expand...
Click to collapse
Flashed CWM using Odin, but still can't access anything. I can only see two loading screens:
1. Freezing battery icon. (it happens, when i try to charge my tablet)
2. Freezing Samsung Galaxy Tab 7.7 sign.(it happens, when i just try to power my device on)
The only way I can power off my tablet is to wait untill my device's battery discharges.

I'm in the same situation:
1. Freezing battery icon. (it happens, when i try to charge my tablet)
2. Freezing Samsung Galaxy Tab 7.7 sign.(it happens, when i just try to power my device on)
Although I can boot into CWM 5.0.2.7 but I'm unable to successfully get a rom to work...
Very frustrating isn't it.
I'm thinking about trying this...
http://forum.xda-developers.com/showthread.php?t=1667886

ianmere said:
I'm in the same situation:
1. Freezing battery icon. (it happens, when i try to charge my tablet)
2. Freezing Samsung Galaxy Tab 7.7 sign.(it happens, when i just try to power my device on)
Although I can boot into CWM 5.0.2.7 but I'm unable to successfully get a rom to work...
Very frustrating isn't it.
I'm thinking about trying this...
http://forum.xda-developers.com/showthread.php?t=1667886
Click to expand...
Click to collapse
Heh, that's true. If anything will help you to make your device alive again, please tell me. Because I really have no idea what to do. Tried everything...
Thanks.

Mrakoris/ said:
Heh, that's true. If anything will help you to make your device alive again, please tell me. Because I really have no idea what to do. Tried everything...
Thanks.
Click to expand...
Click to collapse
OK, I went through the following guide
http://forum.xda-developers.com/showthread.php?t=1862294
And it really worked!!! it takes a while, you will need to put aside around 1-2 hours to go through it carefully step by step.
I flashed CWM using odin first.

ianmere said:
OK, I went through the following guide
http://forum.xda-developers.com/showthread.php?t=1862294
And it really worked!!! it takes a while, you will need to put aside around 1-2 hours to go through it carefully step by step.
I flashed CWM using odin first.
Click to expand...
Click to collapse
What firmware were you using on your tablet, while you were flashing CWM? Why I am asking it, is because i tried lots of different firmwares to install CWM and i couldn't boot into CWM niether with honeycomb, nor with ICS. And yeah thanks for your help.

Mrakoris/ said:
What firmware were you using on your tablet, while you were flashing CWM? Why I am asking it, is because i tried lots of different firmwares to install CWM and i couldn't boot into CWM niether with honeycomb, nor with ICS. And yeah thanks for your help.
Click to expand...
Click to collapse
I started with ICS stock but after my initial flash did't work I believe I wasn't really running any rom because it didn't work.
I then went into Odin/download mode (holding volume down and power).
once in I used the cwm-6.0.2.3-p6800.tar file and loaded it under "Bootloader" then I flashed that successfully.
to then get into recovery I hold Volume up + power (for a very long time about 20secs).
Once in recovery then you can begin the above guide to repair the sdcard.
Hope that helps.

Thanks again for your reply.
I did exactly everything you wrote, even installed original ICS firmware again using Odin. Flashed recovery, hold Power + Vol Up buttons for like 5 minutes, but f*** this, still didn't boot into recovery. Erh.. my device is broken forever.. No solution for all this..

Mrakoris/ said:
What my DEVICE CAN'T DO:
* Can't load into CWM (freezing at "Samsung Galaxy Tab 7.7";
* Can't Power on;
* Can't charge;
* Can't connect to PC.
What my DEVICE CAN DO:
* Load into Downloading mode.
Click to expand...
Click to collapse
I'm in the same situation as Mrakoris, expect that I was in CM 10 and flashed to CM 10.1 before I got a brick.
cakrabayu said:
You can flash new rom via pc odin if you can go to download mode. I would suggest go over this thread first http://forum.xda-developers.com/showthread.php?t=1469635
Click to expand...
Click to collapse
I had a look at that topic but I'd rather try to get to CWM first just to wipe data/cache partitions.
Mrakoris/ said:
Flashed CWM using Odin, but still can't access anything. I can only see two loading screens:
1. Freezing battery icon. (it happens, when i try to charge my tablet)
2. Freezing Samsung Galaxy Tab 7.7 sign.(it happens, when i just try to power my device on)
The only way I can power off my tablet is to wait untill my device's battery discharges.
Click to expand...
Click to collapse
ianmere said:
OK, I went through the following guide
http://forum.xda-developers.com/showthread.php?t=1862294
And it really worked!!! it takes a while, you will need to put aside around 1-2 hours to go through it carefully step by step.
I flashed CWM using odin first.
Click to expand...
Click to collapse
How do you flash CWM using ODIN? CWM isn't a Bootloader, nor a PDA, nor a Phone, nor a CSC.
Thanks in advance, hope I'll get back my Galaxy Tab 7.7!

1. go to download mode
2. connect your device to your pc and start odin
3. put the cwm files on phone section of odin
4. flash awayyyyy....

Yay
Yaaaaay! Problem solved! My Samsung Galaxy Tab 7.7. P6800 is alive again!
The problem was so easy, that i laught alot, when solved it. The problem was with micro SDcard. I used micro SDcard from my last Nokia phone, but Nokia's micro SDcard didn't approach to SGT7.7, but it approached ONLY by the size! So I used another micro SDcard, which I got when I bougt my Tab! Woohoo, i'm so happy now :laugh:

[Q] Gtab P3100 stuck on "Samsung Galaxy Tab 2" Screen

Hi there, i'm from indonesia...
Just wondering whats wrong with my step, cause now i got P3100 "stuck on "Samsung Galaxy Tab 2" Screen" until the battery drains out...
First :
- Trun off P3100
- put download mode
- connect P3100 to pc
- Click ODIN
- select "GT-P3100_ClockworkMod-Recovery_6.0.1.0.tar" file on PDA
- START
- Finish (Sucssesful)
- Reboot
- Result "stuck on "Samsung Galaxy Tab 2" Screen"
Note : just try to flash cwm to flash root.zip for P3100
Second :
- Trun off P3100
- put download mode
- connect P3100 to pc
- Click ODIN
- select "P3100XXBLH2_P3100OLBBLH1_P3100XXLH2_HOME.tar.md5" file on PDA (downloaded from Sammobile)
- START
- Finish (Sucssesful)
- Reboot
Note : Try to Restock to stock firmware 4.0.4 & already try with PIT.File selected on ODIN but..
- still "stuck on "Samsung Galaxy Tab 2" Screen"
Anybody can help me with this issue...??
Cheers

Maybe you could try reflashing the stock firmware WITHOUT any PIT file. I only remember needing a PIT file for older devices like the original Galaxy Tab P1000, not for the newer ones like the P3110.
After which, instead of letting it boot normally, try booting into recovery mode, do a factory reset/wipe cache from there then see if all works again.
Btw, one of the more popular rooting methods for P3110 is actually Chainfire AutoRoot, which does not require custom recovery like CWM and only requires you to flash the AutoRoot tar file through ODIN. Very simple & recommended by everyone here.

Ok, will try today and report soon...
Cheers
Sent from my Desire HD2 using xda premium

jaydaman said:
Maybe you could try reflashing the stock firmware WITHOUT any PIT file. I only remember needing a PIT file for older devices like the original Galaxy Tab P1000, not for the newer ones like the P3110.
After which, instead of letting it boot normally, try booting into recovery mode, do a factory reset/wipe cache from there then see if all works again.
Btw, one of the more popular rooting methods for P3110 is actually Chainfire AutoRoot, which does not require custom recovery like CWM and only requires you to flash the AutoRoot tar file through ODIN. Very simple & recommended by everyone here.
Click to expand...
Click to collapse
Result still stuck on "Samsung Galaxy Tab 2" screen and now every time i connect my tab to wall charger its only display empty battery with like loading proces but stil no battery icon with green bar & i feel my tab is hot when i plug to wall charger for more than 1 hour...
Conditiom right now :
- doesn't have charging indicator
- still stuck on boot screen
- still can enter download mode
- still cannot eneter stock recovery
- the Battery is feel hot
Anyone can help me out...??
Cheers

Sounds like the bootloader got messed up. That's bad & probably only the service centre can help you now.

No, if you can get it into download mode it's fixable. ODIN recovery again and try to get into recovery.
Posted from my Fascinate using XDA Premium

Probably flashing into stock rom will fixed it, as long as your download mode can be accessing you're gonna be fine :thumbup:

You guys are forgetting the most basic thing to fix the tab. Hold Power+Volume up instead of power+volume down. then using the volume keys highlight wipe data/factory reset and then press power, yes and then once finished reboot the tab.

Facing same problem
Help me
I m facing same problem
How to solve it????

What have you done exactly @saddam6600 ? Please tell each Step!
Have you tryed a factory-reset in Recovery?

I unknowingly got into the same problem..
I managed to get into download mode..
then using adb., I rebooted to recovery..
den I wiped cache, data and system.
den I installed an aosp based rom..
nd den evrythng went fine..

i tried to root it
shivam plzz give me link for that rom
plzz

saddam6600 said:
shivam plzz give me link for that rom
plzz
Click to expand...
Click to collapse
It was cyanogenmod 10.2.
I deleted the rom so can't help you with the link.
Any cyanogenmod rom should work..
try thr latest build..

---> http://forum.xda-developers.com/showpost.php?p=50766295&postcount=1001

Hello I have a Samsung Galaxy Tab 2 7.0 It has been experiencing A problem like yours it has been stuck on the "Samsung galaxy tab" screen i read that you should wide all data so i did.. And i read to flash it back to the last rom. i made mine in custa the usb debugging was turned off.om i was trying to put it into stock rom when i encountered the problem. Then when i put it in download mode i was wondering why it can't be detected i realized that because i wiped all data the usb debugging was turned off so. there was no way to flash it back using odin PLEASE help me my tablet version is GT-P3100XXLH2 the fixed one so it has no way to remove the battery the only way was via screws but we don't have the same size PLease healp it's been like this since yesterday

LBGS said:
Hello I have a Samsung Galaxy Tab 2 7.0 It has been experiencing A problem like yours it has been stuck on the "Samsung galaxy tab" screen i read that you should wide all data so i did.. And i read to flash it back to the last rom. i made mine in custa the usb debugging was turned off.om i was trying to put it into stock rom when i encountered the problem. Then when i put it in download mode i was wondering why it can't be detected i realized that because i wiped all data the usb debugging was turned off so. there was no way to flash it back using odin PLEASE help me my tablet version is GT-P3100XXLH2 the fixed one so it has no way to remove the battery the only way was via screws but we don't have the same size PLease healp it's been like this since yesterday
Click to expand...
Click to collapse
Wipe data and install a touchwiz based rom first. I had the same problem and it is a problem of the bootloader.
Then flash twrp using odin.
Once i flashed twrp, all roms work perfect on my tab 2.
Hope that helped.
Sent from my Galaxy S7 edge using XDA-Developers mobile app

can you tell me step by step pls. i'm just a kid btw
dev.kasibhatla said:
Wipe data and install a touchwiz based rom first. I had the same problem and it is a problem of the bootloader.
Then flash twrp using odin.
Once i flashed twrp, all roms work perfect on my tab 2.
Hope that helped.
Sent from my Galaxy S7 edge using XDA-Developers mobile app
Click to expand...
Click to collapse
Tell me step by step pls. i don't know how to do this properly i'm just a kid.

[Q] please help with bootloop galaxy note 10.1 !!

Hi everybody,
I have installed TWRP on my SM-P601 galaxy note 10.1 using odin on this link teamw.in/project/twrp2/206. It's succesfully installed but i couldn't get into recovery mod, i've tried all the button combinaisons but couldnt!
But i tried to get in using this app's com.koushikdutta.rommanager by clockworldmod, with the option (Reboot into Recovery) and now i'm stuck in a kind of bootloop when i turn it on, there is just the logo "samsung galaxy note 10.1 2014 edition".
Without the charger it stays on this until the battery runs out! and when i put the charger it runs and get stuck in the bootloop again. is there away to fix this wit
having to take off the battery? i can get in download mode !
Thank you a lot for your help

zakaria1193 said:
Hi everybody,
I have installed TWRP on my SM-P601 galaxy note 10.1 using odin on this link teamw.in/project/twrp2/206. It's succesfully installed but i couldn't get into recovery mod, i've tried all the button combinaisons but couldnt!
But i tried to get in using this app's com.koushikdutta.rommanager by clockworldmod, with the option (Reboot into Recovery) and now i'm stuck in a kind of bootloop when i turn it on, there is just the logo "samsung galaxy note 10.1 2014 edition".
Without the charger it stays on this until the battery runs out! and when i put the charger it runs and get stuck in the bootloop again. is there away to fix this wit
having to take off the battery? i can get in download mode !
Thank you a lot for your help
Click to expand...
Click to collapse
I have exactly the same problem now. I tried to update a kernel via TWRP and now boot loop. I can't even get into download mode, let alone recovery mode, just reboots automatically when hold the power button down.

mattdb said:
I have exactly the same problem now. I tried to update a kernel via TWRP and now boot loop. I can't even get into download mode, let alone recovery mode, just reboots automatically when hold the power button down.
Click to expand...
Click to collapse
I don't get into download mode at the first try i keep trying many times, maybe it's the same thing for you too. apparently i need to flash stock rom with odin on download mode, that's what you should do too if you get to download mode.

I have same problem...
Sent from my C6833 using Tapatalk

mattdb said:
I have exactly the same problem now. I tried to update a kernel via TWRP and now boot loop. I can't even get into download mode, let alone recovery mode, just reboots automatically when hold the power button down.
Click to expand...
Click to collapse
Noobie here, and not sure if I know enough to make much sense.
I had a similar situation occur today.
New to me but a 2nd hand p600 which rooted today and then I used Odin 3.10.6 to flash TWRP and found myself in a boot loop similar to the description.
I panicked bigtime and feverishly googled my way to to this message thread and my hopes were raised when I read the OPs message and then got dashed to find no solution posted .
After perhaps 20 attempts of getting combined button pushes and releases correct. (it never happened ) I was desperately trying almost anythiing and then got to TWRP File manager, then Reboot, then System, then Normal Reboot and finally Success! I got the regular reboot. Phew!
Hope it helps

Well, I let it sit over the weekend and the battery complete depleted. I was then able to get into TWRP and Download mode when I applied power, I have since flashed a new rom and whewwww, up and running again. Before the battery went dead, it wouldn't do anything but reboot.....

[ROM][4.4.4] Optimized CrDroid for Samsung Galaxy Y

Hello! I was bored, so I optimized this rom.
Installation instructions:
Reboot to CWM/TWRP recovery
Wipe system, data, cache, dalvik
Flash the ROM, and if you are using the CM12 themed ROM's repartitioned build then feel free to install GApps.
After the installations done, reboot to system
Voila! You installed the ROM
What are the changes?
- Use Samurai kernel
- Add Adrenaline Engine, Broadcom booster, etc
- Delete out unused apps like:
Phone related things like SMS (RIL isn't working, so why do we need Telephony?)
DSP Manager
Terminal, and etc...
And what does work?
Everything, it has the same issues as CM11.
Can I repartition?
Yes, you can. I'll make a guide for it soon w/ video tutorial.
Where's the download link?
Here you go.

reserved

Wow! I'm glad to see that there's still movement (low, i see, but still) on the Galaxy Y community!
Galaxy Y is one of the most enjoyable phones I ever had - it is amazing the power we were able to extract from this tiny Broadcom low-storage device
I'm working on a video series about optimizing old devices for modern daily usage (as Android 2.3 doesn't support most of modern apps, while 4.4+ supports a lot more, like WhatsApp for instance).
I just ordered a Galaxy Y and I'll test your ROM and provide feedback as soon as i get it!
Thank you very much

12h01 said:
Wow! I'm glad to see that there's still movement (low, i see, but still) on the Galaxy Y community!
Galaxy Y is one of the most enjoyable phones I ever had - it is amazing the power we were able to extract from this tiny Broadcom low-storage device
I'm working on a video series about optimizing old devices for modern daily usage (as Android 2.3 doesn't support most of modern apps, while 4.4+ supports a lot more, like WhatsApp for instance).
I just ordered a Galaxy Y and I'll test your ROM and provide feedback as soon as i get it!
Thank you very much
Click to expand...
Click to collapse
thanks! i recommend trying out cm12 first, BUT YOU NEED TO REPARTITION. This means that you can get more storage .. And you can optimize the device for daily usage
It's hard to find a Y nowadays, where'd you find one?
Don't forget to link your channel so I can give you credits!

Hello, I have this Galaxy Y GT-S5360 that has been lying around for years.
Years ago I flashed it to Hyperion 9 so I believe it also has a very old cwm recovery...
Could you point me to a step by step guide for repartition and flashing this rom as well as the minimum requirement for the cwm/twrp recovery?
Thank you

Carlinfo said:
Hello, I have this Galaxy Y GT-S5360 that has been lying around for years.
Years ago I flashed it to Hyperion 9 so I believe it also has a very old cwm recovery...
Could you point me to a step by step guide for repartition and flashing this rom as well as the minimum requirement for the cwm/twrp recovery?
Thank you
Click to expand...
Click to collapse
Hello!
Here's the repartitioning instruction (you don't need to do it unless you really need gapps):
[ROM][4.4.4] CyanogenMod 12 Themed ROM for Samsung Galaxy Y
Hello! I was a little bit bored, so I made a CyanogenMod 12 likely ROM for this old device. If coming from stock rom/CM9/CM7/CM11: Check post #102 If coming from CM12 themed ROM's other build: Check post #114, this is the latest build. If...
forum.xda-developers.com
BUT use the optimized crdroid's zip if you want to install this rom.

I bricked my phone (stuck at boot logo) right after installing twrp-3.0.2-1-totoro.
Further reading in twrp totoro thread I found out that this recovery is only for CM11 rom.
My bad, I did not read the whole thread before flashing.
Now I am still trying to solve this problem first

did you solve the problem?

Not yet....
It is really strange. When the phone is in download mode, odin can not detect. Odin can detect when it is off and charging. But when I tried to flash, it stuck in file analysis.
Now it seems I can not even enter download or recovery

Carlinfo said:
Not yet....
It is really strange. When the phone is in download mode, odin can not detect. Odin can detect when it is off and charging. But when I tried to flash, it stuck in file analysis.
Now it seems I can not even enter download or recovery
Click to expand...
Click to collapse
remove battery when in download mode, then boot again and plug in your cable

I can not enter download or recovery any longer....
It is just boot looping
Your browser is not able to display this video.

hmm that's weird. did you get stuck when flashing the pit?

Stuck at file analysis...
Your browser is not able to display this video.

reboot to download mode again and plug in the cable before pressing vol up, do you use odin v3.07?

How to reboot to download? I can not enter download....
I tried Odin v3. 07 as well with same result

Carlinfo said:
How to reboot to download? I can not enter download....
I tried Odin v3. 07 as well with same result
Click to expand...
Click to collapse
Vol down + home + power button, and if you did it right then a warning should pop up. Press Vol up after that and you should see an Android with "Downloading..."

Carlinfo said:
How to reboot to download? I can not enter download....
I tried Odin v3. 07 as well with same result
Click to expand...
Click to collapse
Hello, did you succeed to fix your problem?

Sorry for my late reply.
As shown in my first video, vol down + home + power button only gave me bootlop.
The same result if I pressed vol up + home + power to enter recovery. It just bootloop

Good day, do you know if the ROM supports bluetooth?

Raftalio said:
Good day, do you know if the ROM supports bluetooth?
Click to expand...
Click to collapse
It supports bluetooth