Related
I have just recieved the phone and its driving me nuts. When i switch the wifi on and then try to switch it off it says its switching off but stays like that for next 4 hours and wont switch off! Need to reatart the phone every time. Today battery was full at 10:30 and by 12 was 48% wifi off data off screen brightness at 50% bt off watched 1 minute of 3d video. When tried to dial a number it just stoped and nothing happend so had to restart it again. Its a factory lg handset without simlock or any branding on it. Yesterday had an update 5mb so did it and thats about it. Any ideas?
Sent from my LG-P920 using XDA App
Try factory reset or pdate your phone using LG Mobile Update. If it will say that you have the lates firmware you emergency mode to update.
Sent from my LG-P920 using Tapatalk
Do you know how to factory reset the phone (hard reset) and how do i update the phone via usb? I have downloaded the software but cant detect the phone....usb drivers instaled.
c-traxx said:
Do you know how to factory reset the phone (hard reset) and how do i update the phone via usb? I have downloaded the software but cant detect the phone....usb drivers instaled.
Click to expand...
Click to collapse
Ok i think i found the reason why the wifi wont switch off, it only happens when i sign in to google market. If i leave it wifi is fine. What a piece of sh..
c-traxx said:
Ok i think i found the reason why the wifi wont switch off, it only happens when i sign in to google market. If i leave it wifi is fine. What a piece of sh..
Click to expand...
Click to collapse
Sorry for posting so many times but the new lg update thing dont have emergency mode....
c-traxx said:
Sorry for posting so many times but the new lg update thing dont have emergency mode....
Click to expand...
Click to collapse
It does. Just go to customer support menu and then click on emergency mode , it's the last option to the bottom.
Also the wifi issues are not normal. Try if they will be fixed after reflashing the device. If not then maybe the device is defective. Also the battery drains really fast the first month. That's normal for smartphones and especially for this phone.
m33ts4k0z said:
It does. Just go to customer support menu and then click on emergency mode , it's the last option to the bottom.
Also the wifi issues are not normal. Try if they will be fixed after reflashing the device. If not then maybe the device is defective. Also the battery drains really fast the first month. That's normal for smartphones and especially for this phone.
Click to expand...
Click to collapse
Ok you were right but thats what i get:
c-traxx said:
Ok you were right but thats what i get:
Click to expand...
Click to collapse
Connect the usb cable to the computer.
Shut down your phone and connect it to the usb cable.
Then wait a bit and it will start up by itself.
Shut it down again.
While connected to the USB cable and completely turned off, press the volume + button at the side of the phone and at the same time press the power button.
Wait till you see that the LG mobile tool has found the phone.
The phone screen will be completely black but don't worry about it.
Run the emergency mode menu again and re-type your IMEI.
See if it works that way.
m33ts4k0z said:
Connect the usb cable to the computer.
Shut down your phone and connect it to the usb cable.
Then wait a bit and it will start up by itself.
Shut it down again.
While connected to the USB cable and completely turned off, press the volume + button at the side of the phone and at the same time press the power button.
Wait till you see that the LG mobile tool has found the phone.
The phone screen will be completely black but don't worry about it.
Run the emergency mode menu again and re-type your IMEI.
See if it works that way.
Click to expand...
Click to collapse
Its actually doing something programmers from lg didn't think about script when phone is not connected. Lets see what happens. Fingers crossed.
Ps thats the weirdest way of updating the fone btw.
c-traxx said:
Its actually doing something programmers from lg didn't think about script when phone is not connected. Lets see what happens. Fingers crossed.
Ps thats the weirdest way of updating the fone btw.
Click to expand...
Click to collapse
Ok did the update and wifi still does the same thing, will phone them to replace the handset.
Hi,
I have a Motorola atrix 2. All of sudden it stopped detecting mobile(sim) network. It was working fine , in the morning when I woke up , when i tried to call it was showing flight moded is on and when i tried to to disable flight mode I could not do it , I did a factory reset , it didnt not resolve the issue. I thought it was sim problem , i changed the sim , that also didnt work. I tried recovery it also did not work. Sometimes it detects network but i could not make any call.Most of the times it doesnt detect network(it shows red plus sign).When i try to search for networks , it lists networks after 3-4 minutes(Vodafone , airtel , idea etc) ,But i fails to register with the network.
COuld you please suggest a solution. Is it hardware or software issue?
Thanks,
Hairsh
harish13 said:
Hi,
I have a Motorola atrix 2. All of sudden it stopped detecting mobile(sim) network. It was working fine , in the morning when I woke up , when i tried to call it was showing flight moded is on and when i tried to to disable flight mode I could not do it , I did a factory reset , it didnt not resolve the issue. I thought it was sim problem , i changed the sim , that also didnt work. I tried recovery it also did not work. Sometimes it detects network but i could not make any call.Most of the times it doesnt detect network(it shows red plus sign).When i try to search for networks , it lists networks after 3-4 minutes(Vodafone , airtel , idea etc) ,But i fails to register with the network.
COuld you please suggest a solution. Is it hardware or software issue?
Thanks,
Hairsh
Click to expand...
Click to collapse
There is a file called "radio.img" it's the software part concerned with cell network so probably if the problem came from software it (would) be that file, so please answer this Q first:
have you played and flashed some ROMs and Kernels?? is your phone rooted?
No I have not flashed or played with ROM or Kernel. What I did was my phone was attached to my laptop as USB storage and I removed directly(not safe removal , did not do safe detach). My phone is not rooted , Initially I had Gingerbread(when bought) after that I got official ICS update.
harish13 said:
No I have not flashed or played with ROM or Kernel. What I did was my phone was attached to my laptop as USB storage and I removed directly(not safe removal , did not do safe detach). My phone is not rooted , Initially I had Gingerbread(when bought) after that I got official ICS update.
Click to expand...
Click to collapse
glad to hear that your phone is clean from mods..etc
Now is your Atrix is AT&T version or asian version?
I am located in India..It should be an Asian version.
harish13 said:
I am located in India..It should be an Asian version.
Click to expand...
Click to collapse
good..so the last question, please go to settings>>about phone and tell me your firmware version (it will be like that 672.1.18.MB865.AsiaRetail.en.03)
رامز said:
good..so the last question, please go to settings>>about phone and tell me your firmware version (it will be like that 672.1.18.MB865.AsiaRetail.en.03)
Click to expand...
Click to collapse
System version : 672.1.18.MB865.AsiaRetail.en.03
Same as whatever you have mentioned.
Firmware configuration version : GAS_ASIA_EDISONICSRTSEA_P018
harish13 said:
System version : 672.1.18.MB865.AsiaRetail.en.03
Same as whatever you have mentioned.
Firmware configuration version : GAS_ASIA_EDISONICSRTSEA_P018
Click to expand...
Click to collapse
Great...now you need to fxz (it means flash the original Motorola firmware and restore it's initial state)
so here is what you need:
1) The same firmware (that's why I was asking you about system version)...download from here
http://sbf.droid-developers.org/download.php?device=17&file=351
copy it to desktop
2) Motorola Driver
http://www16.zippyshare.com/v/65297309/file.html
install it.
3) RSD Lite (it's the application used to flash)
http://www16.zippyshare.com/v/85618478/file.html
install it.
>>Now charge your battery to 100% that's very important.
>>backup your important info. from contacts to messages..etc.
>>Turn off your phone.
>>Enter Fast-boot mode by pressing (volume up+ volume down + power button) at the same time..the phone will turn on with a menu...press volume down to move the selector to (AB Fast boot) then press volume up to enter that mode.
>>you now should see "Battery OK"
>> Connect your phone to PC with the usb cable and wait to see connection has changed to "USB Connected" in phone
>>open RSD Lite and follow that video instructions:
https://www.youtube.com/watch?v=AHaEHjSzvQQ
Caution: Don't ever try to cut the flashing operation or your phone will be completely dead...so it's recommended to disable your antivirus while flashing and other services..just leave your PC alone till RSD Lite finishes the flashing.
It's not hard to fxz but please be careful with every step...... HAPPY FLASHING
My internet is slow , its taking time in downloading the firmware image. I will update you once I complete the process , thank you very much for the kind help.
Flashing was successful but for my bad luck the problem still exists. I think its an hardware issue. Do you have any idea? is it repairable? if repairable what would be the cost? Thank you very much for your support.
Good news ,it started working , i rebooted some 4-5 times after flashing firmware ,it started working now.
Thanks for your support. Thank you very much.
Sorry to say that my phone has gone mad. Now it shows network , but I could not able to make call ,if I call anybody it just gets cut and I am not able to receive any calls. Earlier it worked for some time i received 2 calls and I made 2-3 calls. Now calls are not going and not coming also.
harish13 said:
Sorry to say that my phone has gone mad. Now it shows network , but I could not able to make call ,if I call anybody it just gets cut and I am not able to receive any calls. Earlier it worked for some time i received 2 calls and I made 2-3 calls. Now calls are not going and not coming also.
Click to expand...
Click to collapse
I see that flashing original firmware doesn't help....sorry to say but it's now definitely a hardware problem
I guess that when plugging out the USB cable "specially if you unplug it slowly" some current leakage has reversed back and burned a tiny connections on the board.
actually I don't know the repair cost in service center...it depends on how much damage happened on board.
Note: maybe the battery is part of the problem...if your battery isn't genuine it may lead to that crazy behavior specially when making call or receiving calls as battery is required to raise up it's current to wake up some chips and provide more power to the antenna....if the battery was bad or damaged it can't raise it's power suddenly so system will goes crazy and may restart or freeze...etc
Make sure that your battery is genuine and not too old or that generic Chinese bad batteries as they aren't stable and may cause a current spike "extremely bad for electronics" when moving from charging mode to discharging mode and that's exactly what I think it happened to you.
Thanks. I will try to take it a repair centre , Lets see whether they can fix it. Bad part is Motorola no more provides service for Atrix 2 in India. I have to find someone who has expertise in fixing Atrix 2 problems.
harish13 said:
Thanks. I will try to take it a repair centre , Lets see whether they can fix it. Bad part is Motorola no more provides service for Atrix 2 in India. I have to find someone who has expertise in fixing Atrix 2 problems.
Click to expand...
Click to collapse
Dear harish.. did u find any repair center for atrix2...
harish13 said:
Thanks. I will try to take it a repair centre , Lets see whether they can fix it. Bad part is Motorola no more provides service for Atrix 2 in India. I have to find someone who has expertise in fixing Atrix 2 problems.
Click to expand...
Click to collapse
Hi Harish,
Before you go to the service center, try changing your SIM card.
I once had problem with my new MotoZine restarting everytime I clicked a pic. I took it to the service center, they reinstalled OS. That did not work. Then we changed the sim card, and miraculously it worked.
I know its weird, but its worth a try.
Hi guys, this is my first post on this forum.
I have a problem that is making me CRAZY. I will try to explain to you, and I will be sorry for my english (I am Italian).
I have 1+1 since two weeks, I had unlock bootloader, TWRP recovery, stock rom 38R and rooted.
Yesterday I lost my SIM card signal, so I rebooted my device. No sim card PIN asked to me, no signal again.
I've tried to make a phone call and an alert told me "To make a call disable flight mode".. but I don't have flight mode activated!
I have tried with my girlfriend's sim card, same thing.. no pin required, no signal.
I've tried anything.. wipe cache, dalvik, total, re-flashed rom (I have used this: http://forum.xda-developers.com/oneplus-one/development/rom-stock-rooted-4-4-4-xnph38r-t2898098)
I don't kwow what to do..
More info:
I have my IMEI, I've read something about losing the IMEI code, but it's not my case.
Thank you.
I know that you have reflashed and everything , but could you try this once ?
http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541
not tried this solution, do you think it can helps?
someone? please..
Stupid question, do you actually have the SIM in the right way? It's very easy to put it in the wrong way on this phone.
Transmitted via Bacon
I am sure...
opo doesn't say to me "no sim", he tells me that I have to disable flight mode to have a call..!
I have tried anything
alberto91pa said:
I am sure...
opo doesn't say to me "no sim", he tells me that I have to disable flight mode to have a call..!
I have tried anything
Click to expand...
Click to collapse
Did you try the "stock " thing i had posted above ? Doesnt hurt to try as it is a 5 minutes job..you just have to double click the batch file
in your case that would be the firts thing i would have tried..
I did. I've made my 1+1 back to stock with One Toolkit, with 33r. Nothing happens.
timmaaa said:
Stupid question, do you actually have the SIM in the right way? It's very easy to put it in the wrong way on this phone.
Transmitted via Bacon
Click to expand...
Click to collapse
This.
When I got a new sim at AT&T, the guy was telling me how he's seen a handful of OPO and none of them work on this network. Sure enough, he puts in a new sim and it doesn't work. Then he starts playing with mobile settings etc. After a few minutes I ripped the phone out of his hand, eject the sim and discovered he had it backwards. Worked fine after that.
Sent from my A0001 using XDA Free mobile app
yeah, ok, but my sim card is in the right way.
When i open and close sim slot it ask me for the pin.
And then... nothing.
no one? please!
alberto91pa said:
no one? please!
Click to expand...
Click to collapse
I have the same problem
Mine has a ROM stock, I didn't changed anything from when I received it.
Today I decided to have a lock screen with a pin code (because I must have a pin code on the lock screen to allowed reading my job emails via MS Exchange).
After defining it, I rebooted my smartphone but it does not ask me for the mobile pin (the one I just defined), it does not ask me the SIM pin code, and it displayed the normal screen (with all of my widgets and shortcuts).
Because I didn't enter a SIM pin code, the network could not be found
I removed the screen lock protection, but the SIM pin code is still never asked, so I cannot send or receive any call.
The only way I found is to remove and reinsert the SIM card while the mobile is powered on.
So, there is 2 problems:
The SIM pin code is never asked
The lock screen is never displayed
Airplane mode turning on when sim inserted
Hi,
By any chance did you resolve this issue...My OnePlus one is doing same now....when i insert the sim it turns on airplane mode automatically(only in power button press menu, But the airplane mode doesnt turn in settings-more-airplane mode). This is a weird issue am facing and cant explain properly...Now n then i get a signal luckily...But if i reboot it the problem comes back again...
My device is not rooted or bootloader unlocked...
Muley4 said:
Hi,
By any chance did you resolve this issue...My OnePlus one is doing same now....when i insert the sim it turns on airplane mode automatically(only in power button press menu, But the airplane mode doesnt turn in settings-more-airplane mode). This is a weird issue am facing and cant explain properly...Now n then i get a signal luckily...But if i reboot it the problem comes back again...
My device is not rooted or bootloader unlocked...
Click to expand...
Click to collapse
"only in power button press menu, But the airplane mode doesnt turn in settings-more-airplane mode"
How is this even possible?!
Mr.Ak said:
"only in power button press menu, But the airplane mode doesnt turn in settings-more-airplane mode"
How is this even possible?!
Click to expand...
Click to collapse
Yes its weird...I wouldn't even believe it myself if someone says so...
I can't get a signal on my phone. It keeps showing the "emergency calls only" message. When I try to call someone, it shows an error message: "network not registered".
Weird thing is, it was working flawlessly a few hours ago. I didn't mod it, nothing is different. I just charged it and rebooted.
I tried toggling airplane mode on/off, factory reseting, and it didn't fix my problem. My IMEI shows up correctly on settings, and the phone is being used in the same region I bought it.
OBS: If I put the sim card on another phone, it works. When i put it back on the s6, it keeps working until i reboot it, and after that it doesnt register on the carrier network anymore.
Anyone can help me with this?
No one?
I've exhausted all my known options! I can't keep a phone that can't even be turned off. If the phone freezes, that means I'll not have a signal until i can find another phone to put my sim on, and then back again on mine...
I'd really appreciate some help, since support where I live is crappy and chances are that i'll have to take the loss on the defective phone if I can't fix it.
Went to the carrier, tried other sims, even other carriers sims. Still nothing.
You can't get warranty from who you bought it from or else samsung? it sounds like a defect somewhere, if you are lucky it could just be the simcard tray but else it is something inside the phone
Hi,
I have a iphone 3gs which i purchased from eBay long back and.. Long story short, now I have multiple problems :
1> The phone doesnt show/have the IMEI # and neither does any other details like firmware etc.
2> The phone randomly gets restarted continuously almost every 1min.
I tried replacing the battery thinking the issue with restart would be with the battery but still it doesnt stop. Due to this issue I am unable to install the IOS software as it gets restart frequently and the installation stops in the middle. I am now thinking it might be problem with the 30pin charger cable (viz., not genuine) that i am using but not sure. Can anyone help me on how to fix this issue of restart and to get back the IMEI# on the phone again. Any help or suggestion would be really great.