Database Info

Windows will not recognize my phone.

No matter what i do it will not recognize. I have reloaded the driver and i cannot get it to work. I want to go back to stock but can't get started

need a few more details. There are a few threads about this topic already, but if you have AWD launcher or Launcherpro active, Windows will not see the phone through Keis. You have to switch back to the Touchwiz UI and Keis will see the phone.
Hope this helps.

I rooted my phone last week. Then decided to do 2.2 ...when i went to do it my my pc would not recognize the phone. I finally got it to work by selecting mass storage in usb mode. I managed to get 2.2 loaded. Now i want to go back to stock before trying another rom. When i plug the phone to the pc it charges but the pc comes up as not recognizing the phone. When i do try to enter download mode by holding the volume buttons and putting in the usb the phone just boots.
thanks

I think i finally got it...i tried cleaning the contacts and it seems to be working! Sort of....its hit or miss....the other thing...if my phone shuts off the only way i get it on is by holding the volumes and power button and pluggin in a cable....what the heck is that about?

gpzjack said:
I think i finally got it...i tried cleaning the contacts and it seems to be working! Sort of....its hit or miss....the other thing...if my phone shuts off the only way i get it on is by holding the volumes and power button and pluggin in a cable....what the heck is that about?
Click to expand...
Click to collapse
Wow that's a new one. I too have had problems getting my phone connected in Windows. At first I never had a problem but after installing Kies Mini I have never been able to get my phone to connect properly. I'll work on it this week and post any suggestions to see we can get this figured out.

sola fide said:
Wow that's a new one. I too have had problems getting my phone connected in Windows. At first I never had a problem but after installing Kies Mini I have never been able to get my phone to connect properly. I'll work on it this week and post any suggestions to see we can get this figured out.
Click to expand...
Click to collapse
See if this will help http://forum.xda-developers.com/showthread.php?t=798365&highlight=patching

i'm not using kies. i have two of these phones. My wifes phone connects with no problem. I think its corrosion on the port as someone else on here described...phone is running well now but will only turn on by the three button method and plugging in a usb cable

[Q] lg optimus 3d dead

hi, i'm new here and why i'm here is that i'm desperate for help.
i have lg optimus 3d korean version called lg su760. it was working. i even root my phone. when i update it to gingerbread, phone became unrooted. i believe it was on v20e. some one told me to change it to v20a or something.so i download some software by googling. connect my phone via usb to laptop while holding volume up and power button. the s/w logo came up on screen. there was some process on the pc screen then its comes something like failed to update..can't remember. i disconnect my phone. it was still on s/w. then i turned off. from that time my phone won't turn on. won't show any kind of response. when i try to connect with laptop, i can here some sound like its trying to connect but can't and then the sound stops. i really want it fix. but it just dead..plz help me if some one have a clue what happned to it.

Search the forum for guide unbrick optimus 3d kdz method I think u need v20g but I am not sure with the Korean model
sent from my acidhazard thrill

this phone lg optimus 3d (lg su760) just seems dead. it won't turn on, it won't go to recovery mode, i won't show battery charging status, i won't connect to laptop. laptop does make sound like its trying to connect with then phone. but after few attempts it just gave up.
i was in uk, but right now in Pakistan. i showed it to few mobile phone technicians and they said that its BOOT ROM DAMAGED. can anyone please tell me who can i connect this phone to laptop??? i don't know much about ROM, About KDZ or anything. but i think once my phone get connected with pc then i might be able to do something with it.
what do you thinks guys? will i be able to recover my phone or its just gone now..totally dead?? please reply.

At the moment you have no way to recover it by connecting to laptop,you need a new board.

Sorry, search doesn't work right now and i found this thread via google only. Hoping someone can pull magic out of their $$$.
I have an LG Optimus 3D P925G (but using the ThiaiZ ROM for a long time). Yesterday i was going to experiment with another ROM, so i copied some files from the SD to External SD via mass storage, rebooted into recovery and did a backup (CWM), and then forgot i wanted to copy a couple more files, just to be safe. So i rebooted into the phone, connected via mass storage, copied my files and turned the phone off. A bit later, i went to turn the phone on into recovery so that i can flash a new ROM and nothing happened. Phone won't turn on, no screen, nothing!
So here is what i tried, with two separate batteries.
1. Hold down 3D, volume down and power
2. 3d, volume up, power
3. volume down, power
4. volume up, power
5. home, volume up, power
6. home volume down, power
7. Took battery out, held the power button for more than 10 seconds, but the battery back and tried above options
8. All of the above while connected to PC via USB
-Some caused my PC to connect for half a second and go into continuous loops (you hear the PC trying to connect, but half the sound it usually makes, and then again and again...)
-So PC can't see it, ultimately
9. Tried above options with battery out and then putting battery in
I got nothing left to try...any ideas? Magic?
But i am guessing an expensive brick/paperweight is what i have.
Thanks!!!

Follow this step by step.
Install driver.
Use another cable.
Open Windows device manager.
Remove battery.
Insert battery.
Hold vol+.
Insert cable.
If it gets recognized it will show you LG communication port in device manager.
Release vol +.
If you cant see that and all you get is OMAP4430 you probably flashed wrong ROM and your LG can't be repaired with the tools that are available here.
Send from my Xperia Neo V using xda-developers app.

No go. Still get the OMAP, off and on in a continuous loop. The thing is, i didn't install a new ROM yet, i was planning on it but never got there.
Fun (sarcasm).
James

Pls help - same situation
Pls help! I'm in same situation. Did anyone manage to find a solution?
I am desperate because I need my phone all the time.
I have the same symptoms, and the OMAP device in device manager does the same thing. On/Off/On/Off...and so on..
If I simply plug my phone in, It just goes on/off/on/off ....... it only vibrates shortly when it starts and I can see the LG logo, then it turns off.

Did you enter "S/W update" mode ??(by insert battery while holding vol+)??
Hit Thanks Button If I Helped
---------- Post added at 04:06 AM ---------- Previous post was at 04:03 AM ----------
This happened to me . The same .I am sure ...
I just follow this guide and the life return to my phone .
http://forum.xda-developers.com/showthread.php?t=1942836
Hit Thanks Button If I Helped

Search the threads ..
There are tools available that fix this problem

Wkpark fastboot tools make the phone almost unbrickable unless it's damaged the hardware
And it's very hard to damage the hardware

zeeshana said:
hi, i'm new here and why i'm here is that i'm desperate for help.
i have lg optimus 3d korean version called lg su760. it was working. i even root my phone. when i update it to gingerbread, phone became unrooted. i believe it was on v20e. some one told me to change it to v20a or something.so i download some software by googling. connect my phone via usb to laptop while holding volume up and power button. the s/w logo came up on screen. there was some process on the pc screen then its comes something like failed to update..can't remember. i disconnect my phone. it was still on s/w. then i turned off. from that time my phone won't turn on. won't show any kind of response. when i try to connect with laptop, i can here some sound like its trying to connect but can't and then the sound stops. i really want it fix. but it just dead..plz help me if some one have a clue what happned to it.
Click to expand...
Click to collapse
First things first. If you have tried all these, start afresh.
uninstall all LG related software, reboot laptop and start again.
search the forums for all related issues, read read read, understand and follow the steps exactly.
you will have your su760 up and running!!
schubeir

[HELP] Flash FS Message

Please help. Whenever I turn the smartwatch 2 on it just goes straight to Flash FS even when i power it on with NFC. Thanks in Advance

harrold11237 said:
Please help. Whenever I turn the smartwatch 2 on it just goes straight to Flash FS even when i power it on with NFC. Thanks in Advance
Click to expand...
Click to collapse
Not sure I am right, but I think you should use Sony's update manager (or whatever the name is) to flash the watch, or an other software, but mind if I ask, how did you get into this situation, what was the last thing you did when the watch was working?

Ranomez said:
Not sure I am right, but I think you should use Sony's update manager (or whatever the name is) to flash the watch, or an other software, but mind if I ask, how did you get into this situation, what was the last thing you did when the watch was working?
Click to expand...
Click to collapse
I was just checking the time then when i wanted to turn it on it wouldn't and when i rebooted it it just went to Flash FS

harrold11237 said:
I was just checking the time then when i wanted to turn it on it wouldn't and when i rebooted it it just went to Flash FS
Click to expand...
Click to collapse
Did it do the update?

So there I was watching a performance. Then I casually checked the time and BAM it was still stuck at 7:30 hen it was about 8. Then i did some quick research on my phone and saw about SUS then when I went home i tried and finally got it to connect. It was then stuck at about 1% and not moving at the installing (It said there was an update). Then overnight as my cmputer went to sleep the watch suddenly turned dead. It is now dead
List of Apps I installed:
WatchIt
TicTacToe
Smart Camera
Slideshow
Runtastic
Music Player
Messaging
Hangouts
Gmail
Email
Custom Watch
Call Handling
Calender Reminder
Calculator

harrold11237 said:
So there I was watching a performance. Then I casually checked the time and BAM it was still stuck at 7:30 hen it was about 8. Then i did some quick research on my phone and saw about SUS then when I went home i tried and finally got it to connect. It was then stuck at about 1% and not moving at the installing (It said there was an update). Then overnight as my cmputer went to sleep the watch suddenly turned dead. It is now dead
Click to expand...
Click to collapse
There are quite a few people whose watches are bricked after latest SUS update
see my thread here http://forum.xda-developers.com/showthread.php?p=48281895#post48281895
and here http://talk.sonymobile.com/t5/Wirel...re-for-the-Smartwatch-2-is/m-p/467273#U467273
best luck to find some solution
Anil

In Case anybody is interested . I have enclosed the video of my failed attempt to update the firmware buy using SUS
http://youtu.be/QQZNMxwk87Y
---------- Post added at 03:02 PM ---------- Previous post was at 02:58 PM ----------
In Case anybody is interested . I have enclosed the video of my failed attempt to update the firmware buy using SUS
http://youtu.be/QQZNMxwk87Y

Re: Flash F5 Message
I tried to update my smartwatch but it did not updating my watch, for thanks god my watch is working well..

After much cursing and gnashing of teeth, I got the Sony Update Service software to recognize the watch. I noticed that when I powered up my (bricked) SW2, the SONY logo would flash for a split second on the screen before the dreaded "Flash FS" message. So after powering down the watch, I plugged it in to my PC and hit the power button several times quickly. This triggered the windows device manager to successfully recognize the device as a Sony Smartwatch and the update software room it from there. About 10-15 minutes later... my SW2 was working again.
Sent from my XT1058 using Tapatalk

debaillon said:
After much cursing and gnashing of teeth, I got the Sony Update Service software to recognize the watch. I noticed that when I powered up my (bricked) SW2, the SONY logo would flash for a split second on the screen before the dreaded "Flash FS" message. So after powering down the watch, I plugged it in to my PC and hit the power button several times quickly. This triggered the windows device manager to successfully recognize the device as a Sony Smartwatch and the update software room it from there. About 10-15 minutes later... my SW2 was working again.
Sent from my XT1058 using Tapatalk
Click to expand...
Click to collapse
How did you do this? In my case sometimes it recognises it as "SmartWatch 2" using your solution, the Windows (8) installs it's driver and than it sais no device drivers installed in the device manager and neither the PC Companion notices it.
Could you help me somehow please?

vegh_mark97 said:
How did you do this? In my case sometimes it recognises it as "SmartWatch 2" using your solution, the Windows (8) installs it's driver and than it sais no device drivers installed in the device manager and neither the PC Companion notices it.
Could you help me somehow please?
Click to expand...
Click to collapse
To flash it power it on then quickly insert the USB. Should come up with something like a progress bar box. Utility should detect it maybe??

Any luck?
I've got it working by inserting USB just when SONY logo appears. It started normally the watch as if it never happened any FLASH FS screen. But after around 20 seconds of happiness, it froze again but this time I just cannot get it started again. Any other advice?
Thanks

Xtreme_FIRMWARE said:
To flash it power it on then quickly insert the USB. Should come up with something like a progress bar box. Utility should detect it maybe??
Click to expand...
Click to collapse
I still wasn't able to solve it.. My computer isn't recognises it, and neither my phone.. Any other solutions?..

Flash fs problem
please help Flash FS i tried so many time but its still showing Flash Fs

http://forum.xda-developers.com/showthread.php?t=2783426&page=8&nocache=1
This can be solution for Flash FS message when SUS is dead
and to get into DFU mode:
2. Turn the watch off.
3. Insert the cable into the watch and than into the USB-port of your computer (it is faster to insert the cable into the computer USB-port than into the watch).
4. Press and hold the watch power key for half a second immediately after you insert the cable into the USB-port (if the charging [in our case displays: Flash FS] begins return to the 2 step).

[Q] Motorola Atrix 2(MB865) doesnt detect mobile network

Hi,
I have a Motorola atrix 2. All of sudden it stopped detecting mobile(sim) network. It was working fine , in the morning when I woke up , when i tried to call it was showing flight moded is on and when i tried to to disable flight mode I could not do it , I did a factory reset , it didnt not resolve the issue. I thought it was sim problem , i changed the sim , that also didnt work. I tried recovery it also did not work. Sometimes it detects network but i could not make any call.Most of the times it doesnt detect network(it shows red plus sign).When i try to search for networks , it lists networks after 3-4 minutes(Vodafone , airtel , idea etc) ,But i fails to register with the network.
COuld you please suggest a solution. Is it hardware or software issue?
Thanks,
Hairsh

harish13 said:
Hi,
I have a Motorola atrix 2. All of sudden it stopped detecting mobile(sim) network. It was working fine , in the morning when I woke up , when i tried to call it was showing flight moded is on and when i tried to to disable flight mode I could not do it , I did a factory reset , it didnt not resolve the issue. I thought it was sim problem , i changed the sim , that also didnt work. I tried recovery it also did not work. Sometimes it detects network but i could not make any call.Most of the times it doesnt detect network(it shows red plus sign).When i try to search for networks , it lists networks after 3-4 minutes(Vodafone , airtel , idea etc) ,But i fails to register with the network.
COuld you please suggest a solution. Is it hardware or software issue?
Thanks,
Hairsh
Click to expand...
Click to collapse
There is a file called "radio.img" it's the software part concerned with cell network so probably if the problem came from software it (would) be that file, so please answer this Q first:
have you played and flashed some ROMs and Kernels?? is your phone rooted?

No I have not flashed or played with ROM or Kernel. What I did was my phone was attached to my laptop as USB storage and I removed directly(not safe removal , did not do safe detach). My phone is not rooted , Initially I had Gingerbread(when bought) after that I got official ICS update.

harish13 said:
No I have not flashed or played with ROM or Kernel. What I did was my phone was attached to my laptop as USB storage and I removed directly(not safe removal , did not do safe detach). My phone is not rooted , Initially I had Gingerbread(when bought) after that I got official ICS update.
Click to expand...
Click to collapse
glad to hear that your phone is clean from mods..etc
Now is your Atrix is AT&T version or asian version?

I am located in India..It should be an Asian version.

harish13 said:
I am located in India..It should be an Asian version.
Click to expand...
Click to collapse
good..so the last question, please go to settings>>about phone and tell me your firmware version (it will be like that 672.1.18.MB865.AsiaRetail.en.03)

رامز said:
good..so the last question, please go to settings>>about phone and tell me your firmware version (it will be like that 672.1.18.MB865.AsiaRetail.en.03)
Click to expand...
Click to collapse
System version : 672.1.18.MB865.AsiaRetail.en.03
Same as whatever you have mentioned.
Firmware configuration version : GAS_ASIA_EDISONICSRTSEA_P018

harish13 said:
System version : 672.1.18.MB865.AsiaRetail.en.03
Same as whatever you have mentioned.
Firmware configuration version : GAS_ASIA_EDISONICSRTSEA_P018
Click to expand...
Click to collapse
Great...now you need to fxz (it means flash the original Motorola firmware and restore it's initial state)
so here is what you need:
1) The same firmware (that's why I was asking you about system version)...download from here
http://sbf.droid-developers.org/download.php?device=17&file=351
copy it to desktop
2) Motorola Driver
http://www16.zippyshare.com/v/65297309/file.html
install it.
3) RSD Lite (it's the application used to flash)
http://www16.zippyshare.com/v/85618478/file.html
install it.
>>Now charge your battery to 100% that's very important.
>>backup your important info. from contacts to messages..etc.
>>Turn off your phone.
>>Enter Fast-boot mode by pressing (volume up+ volume down + power button) at the same time..the phone will turn on with a menu...press volume down to move the selector to (AB Fast boot) then press volume up to enter that mode.
>>you now should see "Battery OK"
>> Connect your phone to PC with the usb cable and wait to see connection has changed to "USB Connected" in phone
>>open RSD Lite and follow that video instructions:
https://www.youtube.com/watch?v=AHaEHjSzvQQ
Caution: Don't ever try to cut the flashing operation or your phone will be completely dead...so it's recommended to disable your antivirus while flashing and other services..just leave your PC alone till RSD Lite finishes the flashing.
It's not hard to fxz but please be careful with every step...... HAPPY FLASHING

My internet is slow , its taking time in downloading the firmware image. I will update you once I complete the process , thank you very much for the kind help.

Flashing was successful but for my bad luck the problem still exists. I think its an hardware issue. Do you have any idea? is it repairable? if repairable what would be the cost? Thank you very much for your support.

Good news ,it started working , i rebooted some 4-5 times after flashing firmware ,it started working now.
Thanks for your support. Thank you very much.

Sorry to say that my phone has gone mad. Now it shows network , but I could not able to make call ,if I call anybody it just gets cut and I am not able to receive any calls. Earlier it worked for some time i received 2 calls and I made 2-3 calls. Now calls are not going and not coming also.

harish13 said:
Sorry to say that my phone has gone mad. Now it shows network , but I could not able to make call ,if I call anybody it just gets cut and I am not able to receive any calls. Earlier it worked for some time i received 2 calls and I made 2-3 calls. Now calls are not going and not coming also.
Click to expand...
Click to collapse
I see that flashing original firmware doesn't help....sorry to say but it's now definitely a hardware problem
I guess that when plugging out the USB cable "specially if you unplug it slowly" some current leakage has reversed back and burned a tiny connections on the board.
actually I don't know the repair cost in service center...it depends on how much damage happened on board.
Note: maybe the battery is part of the problem...if your battery isn't genuine it may lead to that crazy behavior specially when making call or receiving calls as battery is required to raise up it's current to wake up some chips and provide more power to the antenna....if the battery was bad or damaged it can't raise it's power suddenly so system will goes crazy and may restart or freeze...etc
Make sure that your battery is genuine and not too old or that generic Chinese bad batteries as they aren't stable and may cause a current spike "extremely bad for electronics" when moving from charging mode to discharging mode and that's exactly what I think it happened to you.

Thanks. I will try to take it a repair centre , Lets see whether they can fix it. Bad part is Motorola no more provides service for Atrix 2 in India. I have to find someone who has expertise in fixing Atrix 2 problems.

harish13 said:
Thanks. I will try to take it a repair centre , Lets see whether they can fix it. Bad part is Motorola no more provides service for Atrix 2 in India. I have to find someone who has expertise in fixing Atrix 2 problems.
Click to expand...
Click to collapse
Dear harish.. did u find any repair center for atrix2...

harish13 said:
Thanks. I will try to take it a repair centre , Lets see whether they can fix it. Bad part is Motorola no more provides service for Atrix 2 in India. I have to find someone who has expertise in fixing Atrix 2 problems.
Click to expand...
Click to collapse
Hi Harish,
Before you go to the service center, try changing your SIM card.
I once had problem with my new MotoZine restarting everytime I clicked a pic. I took it to the service center, they reinstalled OS. That did not work. Then we changed the sim card, and miraculously it worked.
I know its weird, but its worth a try.

Can't use wifi network and data even when its connected to it.

Brief introduction of my phone, My phone (Y91) has a power button problem, (I use touchscreen and gestures to turn it on/lock it) Now there was a system update, and I updated it but because of my broken power button/switch, during the update it continuously turned on and off like it was stuck on boot screen. Now I got my phone fixed (power button) but when I tried connecting to my WIFI network, I cant use the Internet at all.
omegle xender
I have restarted my phone and it still wont work. Should I just hard reset it?

heoun said:
I have restarted my phone and it still wont work. Should I just hard reset it?
Click to expand...
Click to collapse
Always a good idea.