Related
Hello everyone.
Yesterday I tried to flash my nexus to f2fs. After that I wanted to go back to the stock, but forgot format filesystem to ext4 and run flash_all.bat.
Flashing was stopped on system write with error: "Unknown chunk type". After that i can't open recovery or turn on phone.
On 4pda i read, that bootloader reopen can help fix this problem.
When I flash new boot, nexus was died.
Can you help me?
Hi,
Please provide a link to exactly what you've flashed? Can you access the bootloader?
i flash google original rom
no, i haven't access to bootloader
no-tactic said:
i flash google original rom
no, i haven't access to bootloader
Click to expand...
Click to collapse
you need to put your device in fastboot mode, keep retrying
then to go back to EXT4 :
- Flash back an official custom recovery (CWM or TWRP)
- Format Data from recovery
- Flash a kernel compatible with your ROM
- Reboot.
no-tactic said:
i flash google original rom
no, i haven't access to bootloader
Click to expand...
Click to collapse
What happens when you hold down Power + Vol down keys together? Hold them until you feel a vibration. May be the battery has died? Keep it on charge for an hour and then try to enter bootloader?
vin4yak said:
What happens when you hold down Power + Vol down keys together? Hold them until you feel a vibration. May be the battery has died? Keep it on charge for an hour and then try to enter bootloader?
Click to expand...
Click to collapse
nothing happens. When I put the phone on charge, it starts to warm up a bit in the camera, but even the display does not light up.
when i connect the phone to computer, it is defined as qhsusb_bulk or unknown usb device
no-tactic said:
nothing happens. When I put the phone on charge, it starts to warm up a bit in the camera, but even the display does not light up.
when i connect the phone to computer, it is defined as qhsusb_bulk or unknown usb device
Click to expand...
Click to collapse
Your memory is no longer accessible unfortunately, you most likely need to have it repaired (new motherboard) :crying:
no-tactic said:
nothing happens. When I put the phone on charge, it starts to warm up a bit in the camera, but even the display does not light up.
when i connect the phone to computer, it is defined as qhsusb_bulk or unknown usb device
Click to expand...
Click to collapse
If all the key combinations don't work, them your device is done for! Since it's totally dead there shouldn't be any problem to RMA it! Good Luck
no-tactic said:
nothing happens. When I put the phone on charge, it starts to warm up a bit in the camera, but even the display does not light up.
when i connect the phone to computer, it is defined as qhsusb_bulk or unknown usb device
Click to expand...
Click to collapse
Press and hold volume up while you connect usb cable to pc.
can you see download mode on device screen?
if yes read this thread entirely http://forum.xda-developers.com/showthread.php?t=2515760
Edit: try this also:
connect your phone to the pc, open device manager.
hold your power button until QHSUSB_BULK disappears, then in that split second press and hold both volume key while you still press the power key. it may end up into the second bootloader
thank you all!
My FRD-L14 was stuck at boot logo. I kept trying the volume keys + power button combo in able to enter eRecovery and dload flash but can't until it drained my battery. Now I charged my phone for almost 3 hours but its always on the red light. Low battery won't let me go to eRecovery it just shows the red thunder icon after polding volume up and power button. (Yep I disconnect the power cord when trying to boot into recovery)
I dont have custom recovery cos I did rollback to MM.
EDIT: Nevermind. I think it was because the phone is trying to boot which drains battery. But my phone is now okay. Bootloop gone
J V A said:
My FRD-L14 was stuck at boot logo. I kept trying the volume keys + power button combo in able to enter eRecovery and dload flash but can't until it drained my battery. Now I charged my phone for almost 3 hours but its always on the red light. Low battery won't let me go to eRecovery it just shows the red thunder icon after polding volume up and power button. (Yep I disconnect the power cord when trying to boot into recovery)
I dont have custom recovery cos I did rollback to MM.
EDIT: Nevermind. I think it was because the phone is trying to boot which drains battery. But my phone is now okay. Bootloop gone
Click to expand...
Click to collapse
Hello,
How did you managed to overcome this situation? Did you removed the battery and charged externally?
I have the same issue at the moment. I can't access recovery or fastboot.
n4nd0r said:
Hello,
How did you managed to overcome this situation? Did you removed the battery and charged externally?
I have the same issue at the moment. I can't access recovery or fastboot.
Click to expand...
Click to collapse
The same thing happened to me once. When the battery was dead everything went normal. But this doesn't happen always.
Saeem said:
The same thing happened to me once. When the battery was dead everything went normal. But this doesn't happen always.
Click to expand...
Click to collapse
Do u mean it happens often?
gopinaidu77 said:
Do u mean it happens often?
Click to expand...
Click to collapse
No! It happened twice with me. I heard it happened to a few others too.
Saeem said:
No! It happened twice with me. I heard it happened to a few others too.
Click to expand...
Click to collapse
How did you solved that issue when it happened?
I'm still trying to find a way to stop boot loop so that I can charge the battery. Without the battery charged I can't enter fastboot. The boot loop drains the battery. I don't want to open the phone yet.
n4nd0r said:
How did you solved that issue when it happened?
I'm still trying to find a way to stop boot loop so that I can charge the battery. Without the battery charged I can't enter fastboot. The boot loop drains the battery. I don't want to open the phone yet.
Click to expand...
Click to collapse
Is your battery dead already and your not able to charge it?
Saeem said:
Is your battery dead already and your not able to charge it?
Click to expand...
Click to collapse
Hii, I have FRD L04, my phone's battery is dead and I'm not able to recharge it, phone is not responding to combination of power button and volume keys. dont know what to do.
yashlangaliya said:
Hii, I have FRD L04, my phone's battery is dead and I'm not able to recharge it, phone is not responding to combination of power button and volume keys. dont know what to do.
Click to expand...
Click to collapse
Sushsuuuuu!!!!!! You replied after a month!!! Did you try to take it to HuaweiCare/HiHonor?
Saeem said:
Sushsuuuuu!!!!!! You replied after a month!!! Did you try to take it to HuaweiCare/HiHonor?
Click to expand...
Click to collapse
No, im the new guy, my phone automatically shutdown because of low battery yesterday. after that my phone is dead. not charging not showing any led indication.
yashlangaliya said:
No, im the new guy, my phone automatically shutdown because of low battery yesterday. after that my phone is dead. not charging not showing any led indication.
Click to expand...
Click to collapse
Does Your PC recognizes the phone after connecting??
Saeem said:
Does Your PC recognizes the phone after connecting??
Click to expand...
Click to collapse
yes, it does, and even when i press volume up and power button together for several seconds or only power button for several seconds it notifies.
yashlangaliya said:
yes, it does, and even when i press volume up and power button together for several seconds or only power button for several seconds it notifies.
Click to expand...
Click to collapse
Are you able to use ADB on PC? If adb detects the phone then try this command "adb reboot" or "fastboot reboot"
Saeem said:
Are you able to use ADB on PC? If adb detects the phone then try this command "adb reboot" or "fastboot reboot"
Click to expand...
Click to collapse
"adb reboot" says "error: no devices/emulators found"
"fastboot reboot" says "< waiting for any device >"
"adb devices" not listing my device
yashlangaliya said:
"adb reboot" says "error: no devices/emulators found"
"fastboot reboot" says "< waiting for any device >"
"adb devices" not listing my device
Click to expand...
Click to collapse
Before trying to do this commands you didn't try to boot it to fastboot mode? Or it didn't work?
Saeem said:
Before trying to do this commands you didn't try to boot it to fastboot mode? Or it didn't work?
Click to expand...
Click to collapse
no it didnt work. I think the battery is completely drained because of that nothing is working not even the red led. and device is not charging dont know why.
yashlangaliya said:
no it didnt work. I think the battery is completely drained because of that nothing is working not even the red led. and device is not charging dont know why.
Click to expand...
Click to collapse
...................... Take it to HiHonor/HuaweiCare. They can help you.
Hello,
I downgraded my Honor 8 via Rollback and installed the Rom FRD-L09C432B131.
But my phone is stuck on the blue Android startup screen.
I can not use the Volume +, Volume - or Power buttons.
All I can do is let it turn off by itself when the battery is at 0%.
When I put it on, it turns on by itself. Arrives on a blue screen. Reboot once and then stays eternally on the blue screen while heating up enormously.
I have no access to the Recovery, erecovery or via the computer (by plugging it into a USB port).
Thanks
gregase said:
Hello,
I downgraded my Honor 8 via Rollback and installed the Rom FRD-L09C432B131.
But my phone is stuck on the blue Android startup screen.
I can not use the Volume +, Volume - or Power buttons.
All I can do is let it turn off by itself when the battery is at 0%.
When I put it on, it turns on by itself. Arrives on a blue screen. Reboot once and then stays eternally on the blue screen while heating up enormously.
I have no access to the Recovery, erecovery or via the computer (by plugging it into a USB port).
Thanks
Click to expand...
Click to collapse
Once your phone turns off, press power button amd volume up button together. This should take you to recovery. Or you can't access this at all?
Sent from my Honor 8 using XDA Labs
I can not turn off my phone. It goes off when the battery is at 0%.
If I put on USB or mains, it recharges and restarts automatically. And I can not stop it ...
When I plug it into a USB port, the Power, Volume + or Volume buttons are ineffective.
And when it's plugged into the PC, it does not show up!
So I do not have access ... except perhaps by a software that would force the connection ... or a manipulation other than Power / Volume ..
When I say reboots, it is a program to display the Android blue screen and hangs on it!
does it say android or honor?
going to dload is kinda tricky sometimes and should be done when connected to wall adapter, not pc
can you keep vol- and power pressed while your phone is connected to pc. keep them pressed even after the phone restarts. dont let go. it might take some time. does it go to fastboot?
gregase said:
I can not turn off my phone. It goes off when the battery is at 0%.
If I put on USB or mains, it recharges and restarts automatically. And I can not stop it ...
When I plug it into a USB port, the Power, Volume + or Volume buttons are ineffective.
And when it's plugged into the PC, it does not show up!
So I do not have access ... except perhaps by a software that would force the connection ... or a manipulation other than Power / Volume ..
Click to expand...
Click to collapse
Is your phone still covered by the warranty?
Sent from my Honor 8 using XDA Labs
Do a factory reset I believe
PalakMi said:
Do a factory reset I believe
Click to expand...
Click to collapse
He can't even boot to recovery.
Sent from my Honor 8 using XDA Labs
Ohhh, sorry my bad
dats prolly because he has mismatched files for the os he's running. he should deffo check if he can go to fastboot. the fact that he cant go to dload doesnt really mean anything because i cant do it either 40% of the time. its a bit iffy. the fact remains, if it boots to honor logo, means some type of os is up there. if he can go to fastboot he can flash stock recovery/recovery2 and try dload again. without proper recovery combo he wont be able to flash anything anyways and warranty prolly wont cover it since its users fault, esp if he has unlocked warning.
Delete
Rommco05 said:
Check first post
Click to expand...
Click to collapse
My bad
Rommco05 said:
No way, Im just want to show you is here too much threads witch similar problems and much information and experiences... I think about one guide/thread where will be all info about rollbacks and nougat firmwares. But is a lot of work about finding info, all is ok
Click to expand...
Click to collapse
Thank you :laugh:
Similar to me, only way is go into bootloader mode, then charge the phone for awhile, you cant do nothing cuz of 0% battery, flash stock recovery, update via dload or direct wifi recovery.
qvnsq said:
Similar to me, only way is go into bootloader mode, then charge the phone for awhile, you cant do nothing cuz of 0% battery, flash stock recovery, update via dload or direct wifi recovery.
Click to expand...
Click to collapse
He can't go to fastboot
if he completely bricked it, he'd be stuck at black screen/android logo, not honor logo. either he's not telling us everything (ran out of juice while upgrading / error while flashing / flashing wrong rom), there is no chance all key partitions got wiped if the process finished successfully. meaning at least he should be able to fastboot cause thats the first thing flashing alongside bootloader. no way any type of system partition is up there, and bl/fb is not, even if they are from a different OS. h8 can be stubborn at times, but keeping the cable in pc and holding vol_down+power for good 20s deffo will force it to at least reboot. thats the only way. if this doesnt work, you should take it to a service center.
I guess it's better if he takes it to the service center
Nothing works. So I have to send it to the service center
Thank you all !
gregase said:
Nothing works. So I have to send it to the service center
Click to expand...
Click to collapse
It's sad but, I hope it gets fixed
Hi gang,
My Xperia Z5 (E6603) would not boot up after the latest update. I'm guessing it must've died during the update.
I tried:
Reset (Pwr + Vol+/-) and OFF button in sim card tray. All reset attempt was done several times with and without the simcard tray.
I noticed the phone did not vibrate when I tried Pwr + vol+ or with the OFF button by itself. It only vibrate when the OFF and Pwr button were held down simultaneously.
To rule out it was battery, I let it charged for almost 2 days now without any success. I still get the slow blinking red light and no solid red or orange or green light indicating the device is fully charged. I also check the integrity of the battery at the stored and it is at 4.0 V, so I believe the battery is not the problem.
Unplugging battery method: Tried unplugging the battery and connect to the computer then plugged it back in with no luck.
Flashtool was not recognized after holding Vol- and connect to the computer.
I also tried different charger and usb
i read from many forum that the battery needs to die in order to reset the kernel. Should I just let the battery discharged? Or are there others ways that are more efficient?
I'm not sure what to do at this point. Any suggestion will be greatly appreciated.
Thank you!
try change battery
Alvian_P said:
try change battery
Click to expand...
Click to collapse
I believe the battery is ok. I brought it to the store to check the charge and it was sufficient
thank you,
Flash phone using Flashtool.
El Solido said:
Flash phone using Flashtool.
Click to expand...
Click to collapse
Unfortunately, the phone is not recognized by flashtool.
Thank you,
maybe bootloader corrupt. bootloader in emmc. try bring your phone to phone services, JTAG flash may help.
Alvian_P said:
maybe bootloader corrupt. bootloader in emmc. try bring your phone to phone services, JTAG flash may help.
Click to expand...
Click to collapse
What software can I use to fix the bootloader? I have an unlocked phone so my service provider will not take care of it.
Thank you!
myphonedied said:
What software can I use to fix the bootloader? I have an unlocked phone so my service provider will not take care of it.
Thank you!
Click to expand...
Click to collapse
Go to phone repair outlets in your city, not in Sony Service Center. usually they can fix hardware problem. I dont know what software are used. I only know with Jtag can repair bootloader via test point.
Alvian_P said:
Go to phone repair outlets in your city, not in Sony Service Center. usually they can fix hardware problem. I dont know what software are used. I only know with Jtag can repair bootloader via test point.
Click to expand...
Click to collapse
Does the bootloader need to be unlocked on the phone previously for the JTAG method to work?
Thank you for the suggestion,
myphonedied said:
Does the bootloader need to be unlocked on the phone previously for the JTAG method to work?
Thank you for the suggestion,
Click to expand...
Click to collapse
not sure. locked or unlocked should work, because the files inject directly to emmc
by the way, have you try to change another battery?
ave you tried to boot the phone into download mode?
Have you tried the actual Sony Tool and the Recovery-Process?
With that i unbricked my Z5 from that symptons i think 2 or 3 times already after the flash went somehow wrong because it stopped midway.
Alvian_P said:
not sure. locked or unlocked should work, because the files inject directly to emmc
by the way, have you try to change another battery?
Click to expand...
Click to collapse
I ordered a new battery, will try that and let you know
Thanks!
Seelbreaker said:
ave you tried to boot the phone into download mode?
Have you tried the actual Sony Tool and the Recovery-Process?
With that i unbricked my Z5 from that symptons i think 2 or 3 times already after the flash went somehow wrong because it stopped midway.
Click to expand...
Click to collapse
The phone won't boot into download mode. It's not recognized by PC companion so I can't carry out the recovery process.
Thank you for the suggestion!
myphonedied said:
I ordered a new battery, will try that and let you know
Thanks!
Click to expand...
Click to collapse
Ok... :good:
myphonedied said:
The phone won't boot into download mode. It's not recognized by PC companion so I can't carry out the recovery process.
Thank you for the suggestion!
Click to expand...
Click to collapse
Another thing - on my Laptop i can't access fastboot mode because it restarts everytime (showing the blue led and then it reboots), therefore i have to attach the Z5 to the Dockingstation.
But it seems like it is completeley dead right?
just to be sure - press and hold vol up and then connect your usb-cable. If the LED stays blue - gg
Then you just have to install the fastboot driver in Test-Mode (reboot to f8 and deactivate the Enforced Driver Signature) and then you may be able to atleast flash or better first boot the phone with a new kernel. If the boot works and then crashes you have your first step to unbrick the phone.
fastboot boot "kernel-image"
Altough i don't have any idea which Kernel you should choose
Seelbreaker said:
Another thing - on my Laptop i can't access fastboot mode because it restarts everytime (showing the blue led and then it reboots), therefore i have to attach the Z5 to the Dockingstation.
But it seems like it is completeley dead right?
just to be sure - press and hold vol up and then connect your usb-cable. If the LED stays blue - gg
Then you just have to install the fastboot driver in Test-Mode (reboot to f8 and deactivate the Enforced Driver Signature) and then you may be able to atleast flash or better first boot the phone with a new kernel. If the boot works and then crashes you have your first step to unbrick the phone.
fastboot boot "kernel-image"
Altough i don't have any idea which Kernel you should choose
Click to expand...
Click to collapse
Red blinking red in Sony phones mean bricked motherboard
Try on different computer. Use USB 2.0 port and original sony cable.
EugenStanis said:
Red blinking red in Sony phones mean bricked motherboard
Click to expand...
Click to collapse
Any way to fix a bricked motherboard?
myphonedied said:
Any way to fix a bricked motherboard?
Click to expand...
Click to collapse
Yes, replacing it
Use setool2 box for unbreak your phone
I was using lrteam twrp 3.4.2b-1206 and I was sideloading the vendor update for 12.2.1.0 when the progress bar froze. I gave it 10 minutes and held the power button to reboot and now the phone is showing no signs of life i cant get it to even show the poco screen. I've got no ideas left on what to do.
ashawanz said:
I was using lrteam twrp 3.4.2b-1206 and I was sideloading the vendor update for 12.2.1.0 when the progress bar froze. I gave it 10 minutes and held the power button to reboot and now the phone is showing no signs of life i cant get it to even show the poco screen. I've got no ideas left on what to do.
Click to expand...
Click to collapse
Did you try holding power and volume down? Also charge it for some hours.
Tecardo said:
Did you try holding power and volume down? Also charge it for some hours.
Click to expand...
Click to collapse
yeah no combination of buttons will show any signs of life and i can't even get to the bootloader. It should be at 100% battery at this point i dont think that's the issue either
Where did you find vendor update for 12.2.1.0 ?
NOSS8 said:
Where did you find vendor update for 12.2.1.0 ?
Click to expand...
Click to collapse
Some users postet from Xiaomi firmware website (non official) . Link is in many rom threads
ashawanz said:
yeah no combination of buttons will show any signs of life and i can't even get to the bootloader. It should be at 100% battery at this point i dont think that's the issue either
Click to expand...
Click to collapse
Did you attach it to pc and see what device gets detected then? It could be in qualcomm usb mode
Tecardo said:
Some users postet from Xiaomi firmware website (non official) . Link is in many rom threads
Click to expand...
Click to collapse
Firmeware not vendor,not the same.
is the phone appear on pc?
Tecardo said:
Did you attach it to pc and see what device gets detected then? It could be in qualcomm usb mode
Click to expand...
Click to collapse
If the the phone appear in qualcom usb, flashing in EDL will be possible and requires an authorization that only official repairers have.
NOSS8 said:
Firmeware not vendor,not the same.
is the phone appear on pc?
Click to expand...
Click to collapse
as I remember it's included? Otherwise use Xiaomi eu rom. It's including vendor.
Tecardo said:
as I remember it's included? Otherwise use Xiaomi eu rom. It's including vendor.
Click to expand...
Click to collapse
My first question was for ashawanz" Where did you find vendor update for 12.2.1.0 ? "
and this answer" If the the phone appear in qualcom usb, flashing in EDL will be possible and requires an authorization that only official repairers have" was not intended for you 'my mistake' but still for ashawanz
ashawanz said:
yeah no combination of buttons will show any signs of life and i can't even get to the bootloader. It should be at 100% battery at this point i dont think that's the issue either
Click to expand...
Click to collapse
Where did you find vendor update for 12.2.1.0 ?
Firmeware not vendor,not the same.
is the phone appear on pc?
If the the phone appear in qualcom usb, flashing in EDL will be possible and requires an authorization that only official repairers have.
Tecardo said:
Did you attach it to pc and see what device gets detected then? It could be in qualcomm usb mode
Click to expand...
Click to collapse
So I just took the device apart to try and get into qualcomm edl mode through hardware and now the front camera led turns red while charging. apart from that there are no signs of life though it won't show up in my pc's device manager even though I have the qualcomm drivers
ashawanz said:
So I just took the device apart to try and get into qualcomm edl mode through hardware and now the front camera led turns red while charging. apart from that there are no signs of life though it won't show up in my pc's device manager even though I have the qualcomm drivers
Click to expand...
Click to collapse
So you should let it charge till later in 6h
NOSS8 said:
Where did you find vendor update for 12.2.1.0 ?
Firmeware not vendor,not the same.
is the phone appear on pc?
If the the phone appear in qualcom usb, flashing in EDL will be possible and requires an authorization that only official repairers have.
Click to expand...
Click to collapse
Phone does not appear on pc and I got it from the evoX 5.1 thread. Ive flashed it before however and it didn't do this it worked just fine
ashawanz said:
Phone does not appear on pc and I got it from the evoX 5.1 thread. Ive flashed it before however and it didn't do this it worked just fine
Click to expand...
Click to collapse
This is the correct firmware.
What do you want to do in EDL mode?
NOSS8 said:
This is the correct firmware.
What do you want to do in EDL mode?
Click to expand...
Click to collapse
It's not booting, he doesn't want to get into edl. It's showing no reaction. But he could try pressing power button for 1min and look for vibration
To try to restore the phone yourself, you must use commands in fastboot or adb.
Tecardo said:
It's not booting, he doesn't want to get into edl. It's showing no reaction. But he could try pressing power button for 1min and look for vibration
Click to expand...
Click to collapse
the power button for a minute didnt do anything either sadly. Im trying to get into edl so i can try and recover it with QPST, but even after opening the phone up and trying to get into edl through hardware, i was only able to get the red charging light to start showing whilst charging. Should I try to disconnect and reconnect the battery maybe?
ashawanz said:
the power button for a minute didnt do anything either sadly. Im trying to get into edl so i can try and recover it with QPST, but even after opening the phone up and trying to get into edl through hardware, i was only able to get the red charging light to start showing whilst charging. Should I try to disconnect and reconnect the battery maybe?
Click to expand...
Click to collapse
Yep, can't hurt at this point.
You can try this:
Recharge the battery for at least 1 hour (even if you think it is already charged)
after connect it by usb and press the power button first,power button with volume -, button with volume +, and try to see if it appears on the pc and in what way.