Database Info

[Q] I brick my nexus, need help

Hello everyone.
Yesterday I tried to flash my nexus to f2fs. After that I wanted to go back to the stock, but forgot format filesystem to ext4 and run flash_all.bat.
Flashing was stopped on system write with error: "Unknown chunk type". After that i can't open recovery or turn on phone.
On 4pda i read, that bootloader reopen can help fix this problem.
When I flash new boot, nexus was died.
Can you help me?

Hi,
Please provide a link to exactly what you've flashed? Can you access the bootloader?

i flash google original rom
no, i haven't access to bootloader

no-tactic said:
i flash google original rom
no, i haven't access to bootloader
Click to expand...
Click to collapse
you need to put your device in fastboot mode, keep retrying
then to go back to EXT4 :
- Flash back an official custom recovery (CWM or TWRP)
- Format Data from recovery
- Flash a kernel compatible with your ROM
- Reboot.

no-tactic said:
i flash google original rom
no, i haven't access to bootloader
Click to expand...
Click to collapse
What happens when you hold down Power + Vol down keys together? Hold them until you feel a vibration. May be the battery has died? Keep it on charge for an hour and then try to enter bootloader?

vin4yak said:
What happens when you hold down Power + Vol down keys together? Hold them until you feel a vibration. May be the battery has died? Keep it on charge for an hour and then try to enter bootloader?
Click to expand...
Click to collapse
nothing happens. When I put the phone on charge, it starts to warm up a bit in the camera, but even the display does not light up.
when i connect the phone to computer, it is defined as qhsusb_bulk or unknown usb device

no-tactic said:
nothing happens. When I put the phone on charge, it starts to warm up a bit in the camera, but even the display does not light up.
when i connect the phone to computer, it is defined as qhsusb_bulk or unknown usb device
Click to expand...
Click to collapse
Your memory is no longer accessible unfortunately, you most likely need to have it repaired (new motherboard) :crying:

no-tactic said:
nothing happens. When I put the phone on charge, it starts to warm up a bit in the camera, but even the display does not light up.
when i connect the phone to computer, it is defined as qhsusb_bulk or unknown usb device
Click to expand...
Click to collapse
If all the key combinations don't work, them your device is done for! Since it's totally dead there shouldn't be any problem to RMA it! Good Luck

no-tactic said:
nothing happens. When I put the phone on charge, it starts to warm up a bit in the camera, but even the display does not light up.
when i connect the phone to computer, it is defined as qhsusb_bulk or unknown usb device
Click to expand...
Click to collapse
Press and hold volume up while you connect usb cable to pc.
can you see download mode on device screen?
if yes read this thread entirely http://forum.xda-developers.com/showthread.php?t=2515760
Edit: try this also:
connect your phone to the pc, open device manager.
hold your power button until QHSUSB_BULK disappears, then in that split second press and hold both volume key while you still press the power key. it may end up into the second bootloader

thank you all!

[Q] HTC one m8 hardbricked can't access any thing

I bricked my htc one m8. Dont even know how, all i had was cyanogenmod 11 installed and it and my phone just boots into black screen after initial splash screen. I can get the charging indicator to show at low or full battery and i get vibration feedback when i hard reboot. I cant get into recovery or bootloader and my computer doesn't recognize it. What do!!

piisceiss said:
I bricked my htc one m8. Dont even know how, all i had was cyanogenmod 11 installed and it and my phone just boots into black screen after initial splash screen. I can get the charging indicator to show at low or full battery and i get vibration feedback when i hard reboot. I cant get into recovery or bootloader and my computer doesn't recognize it. What do!!
Click to expand...
Click to collapse
if your phone boots into a black screen its not hardbricked, hardbricked means it wont turn on at all and you have no indicators

piisceiss said:
I bricked my htc one m8. Dont even know how, all i had was cyanogenmod 11 installed and it and my phone just boots into black screen after initial splash screen. I can get the charging indicator to show at low or full battery and i get vibration feedback when i hard reboot. I cant get into recovery or bootloader and my computer doesn't recognize it. What do!!
Click to expand...
Click to collapse
Does ADB recognize the device?

piisceiss said:
I bricked my htc one m8. Dont even know how, all i had was cyanogenmod 11 installed and it and my phone just boots into black screen after initial splash screen. I can get the charging indicator to show at low or full battery and i get vibration feedback when i hard reboot. I cant get into recovery or bootloader and my computer doesn't recognize it. What do!!
Click to expand...
Click to collapse
Unplug your phone and hold volume up and power for 30
seconds. Do not have it plugged in while doing this.

Bierce22 said:
if your phone boots into a black screen its not hardbricked, hardbricked means it wont turn on at all and you have no indicators
Click to expand...
Click to collapse
Ok so thats good to know

DizDroid said:
Does ADB recognize the device?
Click to expand...
Click to collapse
No but i could be doing aomething wrong. Ill give it another go

piisceiss said:
No but i could be doing aomething wrong. Ill give it another go
Click to expand...
Click to collapse
You may need to uncheck usb debugging in developer options then reboot and go in and check usb debugging again then try adb tools using adb devices and see if it works then. Some m8's can be a real pain that way you just need to keep trying.

M9guy said:
You may need to uncheck usb debugging in developer options then reboot and go in and check usb debugging again then try adb tools using adb devices and see if it works then. Some m8's can be a real pain that way you just need to keep trying.
Click to expand...
Click to collapse
I cant boot into the os, it only goes to a black screen. It still vibrates though when i try doing any form of reset

piisceiss said:
I cant boot into the os, it only goes to a black screen. It still vibrates though when i try doing any form of reset
Click to expand...
Click to collapse
I would run the newest ruu that dottat has posted in the android development section for this phone, put it on your sd card using your computer, then put it back in your phone and boot to fastboot and let it pick it up and hit I believe it is yes and it will restore your phone. You are on 4.4.4 right ? If you are having problems getting to fastboot hold power and volume up until you see the lights change and or it vibrate then quickly switch to power and volume down and it should take you to fastboot, it may take you multiple tries to get it there. This sounds like the screen of death issues people have had on viperone which the fix for that so far has been to reverse the 4g handoff fix as most people that have the sod they had used the 4g handoff fix but if you cant get past the black screen then you cant do the fix for that. Have you tried leaving your phone sit for a while to see if it comes out of it ? Also most people only had that issue in weak signal areas so a good signal area could get your screen working again if you had done the 4g handoff fix. If you did some have said that the change can stick even through a ruu, but I cannot verify that either way.

Can I say I'm having an almost same problem.
I wiped my phone in prep of loading a new rom.
RUU the firmware for 4.4.4
Loaded twrp
and then it rebooted to the htc screen.
Now I can't get past that screen. I can hard reboot but it only comes back to that screen. and if I try to access it through the computer it can't load the driver so that I can sideload.
Help please

rcbarrieault said:
Can I say I'm having an almost same problem.
I wiped my phone in prep of loading a new rom.
RUU the firmware for 4.4.4
Loaded twrp
and then it rebooted to the htc screen.
Now I can't get past that screen. I can hard reboot but it only comes back to that screen. and if I try to access it through the computer it can't load the driver so that I can sideload.
Help please
Click to expand...
Click to collapse
it's tricky to get it back to hboot... but you can with practice. Hold power a both volume buttons until you think it finally has rebooted. Switch to only holding vol down to enter hboot. Timing and practice makes perfect.

It took about an hour of trying. But I did it. Plus I had to do a few other things to get things remounted.

rcbarrieault said:
It took about an hour of trying. But I did it. Plus I had to do a few other things to get things remounted.
Click to expand...
Click to collapse
I will have to try this. What other things did you do?

Once I was back in recovery I reformatted before rebooting and then from recovery I installed the rom.

dottat said:
it's tricky to get it back to hboot... but you can with practice. Hold power a both volume buttons until you think it finally has rebooted. Switch to only holding vol down to enter hboot. Timing and practice makes perfect.
Click to expand...
Click to collapse
I did this and we're all fixed, thank you for all the replies

dottat said:
it's tricky to get it back to hboot... but you can with practice. Hold power a both volume buttons until you think it finally has rebooted. Switch to only holding vol down to enter hboot. Timing and practice makes perfect.
Click to expand...
Click to collapse
I agree with Dottat, faced the same issue when trying to flash ARHD 22.1 on my Verizon M8. I think I sprayed some **** in my pants with that loud fart .
After trying several times I got the trick and could get into Hboot. The issue I think was I was holding Power + Volume up & down for more than required time and it Rebooted. We need to Switch Off the device by Holding Power + Volume UP & Down button for about 8-10 secs and then just remove the finger from Volume UP button. It takes you to Hboot mode..

Problems with my d6633 Z3 Dual

Hallo people,
I have a very big problem with my d6633. I installed tonight TWRP - so fas, so good. After installing TWRP asked me to root the device, I said YES. My bootloader was unlocked. Then I couldn't exit TWRP. After every reboot the device started into TWRP. Now I can not start the device. I tried with Power+ Volume+, reset button - nothing.
Any suggestions?
Thanks for your help.

mazagi said:
Hallo people,
I have a very big problem with my d6633. I installed tonight TWRP - so fas, so good. After installing TWRP asked me to root the device, I said YES. My bootloader was unlocked. Then I couldn't exit TWRP. After every reboot the device started into TWRP. Now I can not start the device. I tried with Power+ Volume+, reset button - nothing.
Any suggestions?
Thanks for your help.
Click to expand...
Click to collapse
Use flashtool go back stock, after flash twrp, flash supersu manually, don't let twrp install for you

yuzhengwen said:
Use flashtool go back stock, after flash twrp, flash supersu manually, don't let twrp install for you
Click to expand...
Click to collapse
How can I do that? There is no power on my device. And I think I cannot charge it...

mazagi said:
How can I do that? There is no power on my device. And I think I cannot charge it...
Click to expand...
Click to collapse
Google using flashtool to flash stock firmware

yuzhengwen said:
Google using flashtool to flash stock firmware
Click to expand...
Click to collapse
No chance. The device will not be detected. I can not charge it.

mazagi said:
No chance. The device will not be detected. I can not charge it.
Click to expand...
Click to collapse
How much % did it have before you started the procedure?
Did you try holding down vol+ and then plugging it into USB?

Hello Jkay7,
Thanks for your support. My solution was to leave the device switched off over the night. Connected via original cable. Today in the morning my dyouzhengwen evice was detected via flash tool and as youzhengwen suggested I could flash the original ftf file.

artusk01 said:
Hello Jkay7,
Thanks for your support. My solution was to leave the device switched off over the night. Connected via original cable. Today in the morning my dyouzhengwen evice was detected via flash tool and as youzhengwen suggested I could flash the original ftf file.
Click to expand...
Click to collapse
Nice to hear that!

Any help would be appreciated
Sony Xperia Z3 Dual D6633
I have tried just about every method seen. My problem with the flashtool or PC companion is that the phone is recognized by the computer but I can only start to turn the device on which I don't believe it actually boots. Broken display and new display does not power on.
Or it connects in fastboot by holding volume up when connecting. This shows a blue led.
But trying to connect in flash mode by holding power down just makes the led flash red then green continuously.
And for the pc companion it always says the connection was unsuccessful once the led turns green on the device.
I got the phone for only $40 in this condition. So I cannot say what entirely was wrong or what it's last working state was.
I bought a new screen and power flex cable. As well as a back plate and tempered glass protectors. I was going to wait until everything works perfect speakers and all before I sealed it tight with water proof adhesive stickers.
Even before I bought the new power flex the computer recognized it and the battery health and charge %. The battery was able to charge. But I couldn't turn the device on.
The computer confirmed that it had been at 29% after some time charging and then 100% after leaving it on charge.
Now with the new screen and power cable the phone still does nothing if not plugged it. The light was red at first, but then yellow, then after some time green when the battery fully charged. This was again even before the new parts.
I have to plug it in to try anything.
It goes red then starts to turn on and turns green.
But I hear no sound, get no vibrations, the computer only sees it as the phone and shows absolutely nothing on the removable disk. Just blank when I click on the drive volume. But it is seen as an Xperia D6633 phone or fastboot Android device.
I've tried the reset button, holding power and volume up, volume down, all three. Tried my factory cable. Different cables, different ports, uninstalling it from service manager and letting the flash tool recognize and install it.
I also tried the new display on the old power flex and the old display on the new power flex.
Nothing changed, no vibrations, no sounds, system never actually fully starts as far as I can tell, and cannot connect in flash mode only fast boot. And the flashable file is only seen in flash mode. Fastboot can only see the folder but it is ready to flash files as far as I can tell.

@xdathekilljoy
That's a lot of money you're putting into an (apparently) broken phone Brave!
Okay so what happens if you hold Vol+ while it's shut down and then connect it to USB, the LED turns blue, right?
So why does flashing it from there on not work?

Jkay7 said:
@xdathekilljoy
That's a lot of money you're putting into an (apparently) broken phone Brave!
Okay so what happens if you hold Vol+ while it's shut down and then connect it to USB, the LED turns blue, right?
So why does flashing it from there on not work?
Click to expand...
Click to collapse
Well it didn't seem that broken at first and both it and the display were only about 37 piece. Power flex was almost 10. Seemed like a rightful price.
Yes the led turns blue and it is in fastboot mode. The flash file seems to only be readable for flashing in flash mode "volume down". I can see the folder of the flash file in fastboot mode " volume up ", but not in a flashable format.
And when connecting " volume down " it fails a connection while the led just flashes green to red to green to red continually

Two updates
1. I thought I should mention that when I do plug the phone in to a charger or computer the top does get a bit warm or hot as well as the led turns on. Different color depending.
2. With much fiddling and trying if holding the volume down button for different lengths of time while connecting up a computer I finally got it to connect in flash mode and flashed a file...... No change.
At this point maybe I should try a new battery for the hell of it even though this one seems to be working.
Or there is a minute hardware damage somewhere. Maybe the power ic? Or s capacitor?

hard bricked my MT-TL10

Hi there,
Kindly help... I successfully installed B512 on my TL10 using force upgrade method, afterwhich I changed recovery to TWRP 3.0.2 using mobopx v2.2, which was also successful. And then I installed SuperSU 2.46 via TWRP, then cleared cache/dalvik. But upon rebooting system, I get a blank screen, even after waiting for more than 15 minutes.
And so I tried going to TWRP (Vol+ and power), which was successful, in order to boot to bootloader, with the intention of loading back the stock bootloader via adb, so that I can force install B512 from my microSD card again. It seemed to install fine...
However, at this point, I cannot reboot to bootloader (Vol- and power) anymore, I only get blank screen. Trying recovery (Vol+ and power) doesn't work either. Rebooting normally gives me the same. I cannot by any means connect via adb now.
Is there any way to unbrick my phone at this point?
Thanks so much. Cheers.

Works entrance for the recovery (Vol+ and Vol- and Power)?

rakrakrak said:
Works entrance for the recovery (Vol+ and Vol- and Power)?
Click to expand...
Click to collapse
No bro...

eusagc said:
However, at this point, I cannot reboot to bootloader (Vol- and power) anymore, I only get blank screen. Trying recovery (Vol+ and power) doesn't work either. Rebooting normally gives me the same. I cannot by any means connect via adb now.
Click to expand...
Click to collapse
What happens when you do a Vol up + power?

CloudCompute said:
What happens when you do a Vol up + power?[/QU
The phone "doesn't want to turn off" bro. It has fully discharged, but as soon as I plug the charger in, it immediately powers up. When it does, now it shows the Huawei logo. But it's stuck there, and if I press the power button for a few secs, it will power down, but immediately power up again...
Click to expand...
Click to collapse

eusagc said:
CloudCompute said:
What happens when you do a Vol up + power?[/QU
The phone "doesn't want to turn off" bro. It has fully discharged, but as soon as I plug the charger in, it immediately powers up. When it does, now it shows the Huawei logo. But it's stuck there, and if I press the power button for a few secs, it will power down, but immediately power up again...
Click to expand...
Click to collapse
Let it get fully charged first. Then remove the charger and keep the Vol up and power button pressed for ~10 secs or more, and see where it takes you.
Click to expand...
Click to collapse

CloudCompute said:
eusagc said:
Let it get fully charged first. Then remove the charger and keep the Vol up and power button pressed for ~10 secs or more, and see where it takes you.
Click to expand...
Click to collapse
Ok dude, will do. Thanks!
Click to expand...
Click to collapse

CloudCompute said:
eusagc said:
Let it get fully charged first. Then remove the charger and keep the Vol up and power button pressed for ~10 secs or more, and see where it takes you.
Click to expand...
Click to collapse
Done bro. Although I must say, I'm kinda back like yesterday when the phone is just helplessly discharging until it drops dead. Pressing vol+ and power restarts the phone, but I'm still stuck at the logo...
Click to expand...
Click to collapse

CloudCompute said:
Done bro. Although I must say, I'm kinda back like yesterday when the phone is just helplessly discharging until it drops dead. Pressing vol+ and power restarts the phone, but I'm still stuck at the logo...
Click to expand...
Click to collapse
You seem to be in a sticky situation bro. Your recovery seems to be broken because in stock recovery Vol up + power should ideally take you to recovery and not restart. If you could somehow boot into fastboot mode then it could open up some options to bring your phone to life.
With no way to connect to the phone the only options left are the hardware buttons. I am sure you'd have tried them already, but just in case you have not, try the other 2 key combinations also, Vol down + power and Vol up + Volume down + power, for ~10 secs, to check if any of these either forces a factory reset or boots the phone into fastboot mode.

eusagc said:
Hi there,
Kindly help... I successfully installed B512 on my TL10 using force upgrade method, afterwhich I changed recovery to TWRP 3.0.2 using mobopx v2.2, which was also successful. And then I installed SuperSU 2.46 via TWRP, then cleared cache/dalvik. But upon rebooting system, I get a blank screen, even after waiting for more than 15 minutes.
And so I tried going to TWRP (Vol+ and power), which was successful, in order to boot to bootloader, with the intention of loading back the stock bootloader via adb, so that I can force install B512 from my microSD card again. It seemed to install fine...
However, at this point, I cannot reboot to bootloader (Vol- and power) anymore, I only get blank screen. Trying recovery (Vol+ and power) doesn't work either. Rebooting normally gives me the same. I cannot by any means connect via adb now.
Is there any way to unbrick my phone at this point?
Thanks so much. Cheers.
Click to expand...
Click to collapse
Go back to stock recovery reflash stock rom make sure you have a unlocked bootloader......all remember that Google is your friend.....

CloudCompute said:
You seem to be in a sticky situation bro. Your recovery seems to be broken because in stock recovery Vol up + power should ideally take you to recovery and not restart. If you could somehow boot into fastboot mode then it could open up some options to bring your phone to life.
Click to expand...
Click to collapse
That's correct bro. Although it appears from adb that I was able to install the stock recovery, I cannot access it with Vol+ and power.
CloudCompute said:
With no way to connect to the phone the only options left are the hardware buttons. I am sure you'd have tried them already, but just in case you have not, try the other 2 key combinations also, Vol down + power and Vol up + Volume down + power, for ~10 secs, to check if any of these either forces a factory reset or boots the phone into fastboot mode.
Click to expand...
Click to collapse
Yes, I did. And I can't even boot to bootloader after all that... The phone only seems to charge, but is stuck at the logo.
I'm ready to send this to Huawei's service center. Is there anything more I can do at this point before I do that? Thanks so much.

stinka318 said:
Go back to stock recovery reflash stock rom make sure you have a unlocked bootloader......all remember that Google is your friend.....
Click to expand...
Click to collapse
Thanks bro, but that's what I did, or at least was planning to do. After rooting B512 via TWRP, the phone got stuck at the logo. And so I tried to install stock recovery, which it did, in order to reflash the stock ROM. But at this point I'm still stuck at the logo, and I can't access recovery and BL anymore. The BL is unlocked right from the start...

eusagc said:
Thanks bro, but that's what I did, or at least was planning to do. After rooting B512 via TWRP, the phone got stuck at the logo. And so I tried to install stock recovery, which it did, in order to reflash the stock ROM. But at this point I'm still stuck at the logo, and I can't access recovery and BL anymore. The BL is unlocked right from the start...
Click to expand...
Click to collapse
Did you try volume down and then plug USB in on computer then command prompt fast boot reboot it may work.

eusagc said:
I'm ready to send this to Huawei's service center. Is there anything more I can do at this point before I do that? Thanks so much.
Click to expand...
Click to collapse
Go ahead, send it to Huawei service centre. They'll have ways to reach the internal memory after opening up the device.

stinka318 said:
Did you try volume down and then plug USB in on computer then command prompt fast boot reboot it may work.
Click to expand...
Click to collapse
Thank you for this suggestion brother. I tried exactly as you described, however, the phone looks badly discharged, and while the screen was blinking/showing the red battery icon, it doesn't seem to want to charge. I waited around 5 minutes, but nothing seems to progress from here.
And so now, I moved the USB cable to a proper charger, and now it seems to be charging, with the LED light a steady red, and the screen the normal red circle with "0%" inside. It seems to be charging at the moment, although I really have to wait until it shows "1%" until I can surely say so.
One thing that's different now is that the phone hasn't turned on (by itself) yet. And at least this looks promising.
I'll let you know what happens in a while... Thank you!

eusagc said:
Thank you for this suggestion brother. I tried exactly as you described, however, the phone looks badly discharged, and while the screen was blinking/showing the red battery icon, it doesn't seem to want to charge. I waited around 5 minutes, but nothing seems to progress from here.
And so now, I moved the USB cable to a proper charger, and now it seems to be charging, with the LED light a steady red, and the screen the normal red circle with "0%" inside. It seems to be charging at the moment, although I really have to wait until it shows "1%" until I can surely say so.
One thing that's different now is that the phone hasn't turned on (by itself) yet. And at least this looks promising.
I'll let you know what happens in a while... Thank you!
Click to expand...
Click to collapse
Charging's at 4% now... And the phone hasn't turned on so far... Looks promising...

eusagc said:
Charging's at 4% now... And the phone hasn't turned on so far... Looks promising...
Click to expand...
Click to collapse
All well now?

CloudCompute said:
All well now?
Click to expand...
Click to collapse
I was out of town for the past few weeks and didn't have time to do this. I'm back now and plan to work on this tonight. Thank you bro, I'll let you know how it goes...

Cannot Enter Bootloader or Use Volume Up.

Hello Guys,
My OnePlus One screen broke, it was in my drawer for more than 15 days without charge, i connected charger for 1 hour it just went from 1% to 5% but i didnt thought much about it as my priority was to change screen, i bought touch+lcd with frame and replaced it myself, but it wasnt powering up then i tried putting the backpanel on, it then booted up to the home screen, but the battery indicator wasnt moving up i powered off the phone after that it never turned on, i researched a bit and found out the after long period of time if you dont charge your phone might have problem charging and there was one suggestion which i followed and that was charge OPO using usb cable attached to PC, i left it for somewhat 7hours and it powered on i thought it might be the problem of ROM i flashed official H2OS (regret selecting this rom) using TWRP, it was a catastrophe my phone wont Enter Bootloader or Recovery, and wont even boot to system, it seemed i hardbricked my device, i used Oneplus one recovery tool 64GB to bring my device to life but after that no matter what i do my device wont enter to bootloader as the volume up button stopped working too : tried advance reboot, powerup+volumeup, opo toolkit.
Help me, i want to root my device and unlock bootloader once again.

Pra7ul said:
Hello Guys,
My OnePlus One screen broke, it was in my drawer for more than 15 days without charge, i connected charger for 1 hour it just went from 1% to 5% but i didnt thought much about it as my priority was to change screen, i bought touch+lcd with frame and replaced it myself, but it wasnt powering up then i tried putting the backpanel on, it then booted up to the home screen, but the battery indicator wasnt moving up i powered off the phone after that it never turned on, i researched a bit and found out the after long period of time if you dont charge your phone might have problem charging and there was one suggestion which i followed and that was charge OPO using usb cable attached to PC, i left it for somewhat 7hours and it powered on i thought it might be the problem of ROM i flashed official H2OS (regret selecting this rom) using TWRP, it was a catastrophe my phone wont Enter Bootloader or Recovery, and wont even boot to system, it seemed i hardbricked my device, i used Oneplus one recovery tool 64GB to bring my device to life but after that no matter what i do my device wont enter to bootloader as the volume up button stopped working too : tried advance reboot, powerup+volumeup, opo toolkit.
Help me, i want to root my device and unlock bootloader once again.
Click to expand...
Click to collapse
adb reboot bootloader

waterdaan said:
adb reboot bootloader
Click to expand...
Click to collapse
That Just Reboots it to system, i have turned adb on and clicked on trust this connection i have checked adb devices, and it shows attached devices too,
it just wont reboot to bootloader, but i can enter recovery. Help Please.

Pra7ul said:
That Just Reboots it to system, i have turned adb on and clicked on trust this connection i have checked adb devices, and it shows attached devices too,
it just wont reboot to bootloader, but i can enter recovery. Help Please.
Click to expand...
Click to collapse
Is your volume up button actually broken or does it still work and can you boot into something? If it still works (hold on, this idea might be a little crazy xD) you could try completely hard bricking (no joke! you cannot get into Qualcomm download mode with a booting device) and restoring it with the msm8974downloadtool from the oneplus one unbricking guide which should theoretically fix everything that is wrong.

noahvt said:
Is your volume up button actually broken or does it still work and can you boot into something? If it still works (hold on, this idea might be a little crazy xD) you could try completely hard bricking (no joke! you cannot get into Qualcomm download mode with a booting device) and restoring it with the msm8974downloadtool from the oneplus one unbricking guide which should theoretically fix everything that is wrong.
Click to expand...
Click to collapse
Even If my volume button dosent work then why wont it enter bootloader via advance reboot it just restarts to system after selecting reboot to bootloader,so i should hard brick my device once again, P.S. i have done that twice before though.