Related
hi! i have problem, my oneplus one is bricked, on PC:qhsusb bulk
i dont do anything, i just do some calls and listen music and in home i look on my phone and is no reaction, what to do?
Try pressing volume down and power button simultaneously for about 15 seconds... Or maybe charge the phone?
Sent from my One using Tapatalk
boober78 said:
Try pressing volume down and power button simultaneously for about 15 seconds... Or maybe charge the phone?
Sent from my One using Tapatalk
Click to expand...
Click to collapse
no reactions, on PC identify:QHSUSB__BULK
skyzone123 said:
no reactions, on PC identify:QHSUSB__BULK
Click to expand...
Click to collapse
Hold just the power button for 30 seconds while the phone is unplugged from the computer, then plug it into the PC. Does anything change?
ddggttff3 said:
Hold just the power button for 30 seconds while the phone is unplugged from the computer, then plug it into the PC. Does anything change?
Click to expand...
Click to collapse
no, again: QHSUSB__BULK
skyzone123 said:
no, again: QHSUSB__BULK
Click to expand...
Click to collapse
Did you ever get it fixed? I'm exactly in the same situation. Please, let me know how are you doing now?
skyzone123 said:
hi! i have problem, my oneplus one is bricked, on PC:qhsusb bulk
i dont do anything, i just do some calls and listen music and in home i look on my phone and is no reaction, what to do?
Click to expand...
Click to collapse
What did you do to brick it?.. You didn't try flashing/tweaking anything, it just stopped?.. When you plug it in does it charge?.. Can you enter fast boot?
Sent from my OnePlus ONE
bricked oneplus
Setting.Out said:
What did you do to brick it?.. You didn't try flashing/tweaking anything, it just stopped?.. When you plug it in does it charge?.. Can you enter fast boot?
Sent from my OnePlus ONE
Click to expand...
Click to collapse
i have the same error, i delete the partitions and reboot before send the new over fastboot
there is a way to fix this?
To my knowledge, getting the qhsusb_bulk on your computer is a hard brick, and cannot be fixed, without sending it back.
Sent from Bacon
Try
http://forum.xda-developers.com/one...een-fastboot-adb-t2835696/page16#post55129486
And I've bookmarked that one.
Might come in handy for the future, thanks!
Sent from Bacon
Have the same problem.
http://forum.xda-developers.com/oneplus-one/help/soft-brick-help-t2916548
But the MSMTool do not work.
sohohopeter said:
Have the same problem.
http://forum.xda-developers.com/oneplus-one/help/soft-brick-help-t2916548
But the MSMTool do not work.
Click to expand...
Click to collapse
Has exactly the same problem MSMTool looped on 8974_msimage, log has following lines:
[1.#INF00] Device Arrival: \\?\USB#VID_05C6&PID_9008#6&28504aee&0&4#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
[1.#INF00] Device Remove: \\?\USB#VID_05C6&PID_9008#6&28504aee&0&4#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Device disconnected each time after progress of "flashing" 8974_msimage ended.
Did No ROOT, No Flash, just common use. Make OTA upgrade once received.
After about a month of using after update - it just did not powered on morning (did not charge it that night - it had 96% on evening). Now detected as QHSUSB_Bulk. No luck with Color OS method.
Has no more idea what to try to recover it
I've got a z5 dual e6683 not working properly for 6 months.
Some day, it just started not charging when the phone was on. I waited till battery died, then plugged it in wall charger and it got up to 100%. I managed to start the phone and then it was ok. I charged it a couple of time in 2 days, and then suddenly doesn't recognizes charge anymore... I also can't turn it off; when i turn off, it stops and restarts immediatly in bootloop. I managed to force it to stop by pressing power and both + and - volume but even then its not totally off, it still displays battery level...... Any ideas ?
Thanks
Wait for battery do die completely, then hold volume down and plug usb cable if it turns green then flashmode works and you can flash new firmware, maybe it will fix the issue
L33Tgod said:
Wait for battery do die completely, then hold volume down and plug usb cable if it turns green then flashmode works and you can flash new firmware, maybe it will fix the issue
Click to expand...
Click to collapse
i'm gonna try that. Do you have any idea which firmware i can use ? I actually have 32.2.A.5.11 RU.
jackijumbo90 said:
i'm gonna try that. Do you have any idea which firmware i can use ? I actually have 32.2.A.5.11 RU.
Click to expand...
Click to collapse
try reflashing, but do clean wipe
L33Tgod said:
try reflashing, but do clean wipe
Click to expand...
Click to collapse
I managed to boot in flashmode and flash a previous version of the same firmware but i'm still experiencing the same problems......
did it fall in water by any chance?
a00r said:
did it fall in water by any chance?
Click to expand...
Click to collapse
no, it didn't fall. I used it whithout any problem during 6 months and then it just strated buging... Sony won't take it under warranty since i bought it from Hong kong (no dual sim version in Europe at the time...)
another symptom is that, when flashtool is done and says disconnect and restart, i disconnect the phone from the computer and it boots on its own...
jackijumbo90 said:
another symptom is that, when flashtool is done and says disconnect and restart, i disconnect the phone from the computer and it boots on its own...
Click to expand...
Click to collapse
try selecting all to wipe in flashtool if you dont have any important files on it
L33Tgod said:
try selecting all to wipe in flashtool if you dont have any important files on it
Click to expand...
Click to collapse
that's what i did.
jackijumbo90 said:
that's what i did.
Click to expand...
Click to collapse
well go to service, not sony, but normal service and ask are they familiar with that behaviour
Hi gang,
My Xperia Z5 (E6603) would not boot up after the latest update. I'm guessing it must've died during the update.
I tried:
Reset (Pwr + Vol+/-) and OFF button in sim card tray. All reset attempt was done several times with and without the simcard tray.
I noticed the phone did not vibrate when I tried Pwr + vol+ or with the OFF button by itself. It only vibrate when the OFF and Pwr button were held down simultaneously.
To rule out it was battery, I let it charged for almost 2 days now without any success. I still get the slow blinking red light and no solid red or orange or green light indicating the device is fully charged. I also check the integrity of the battery at the stored and it is at 4.0 V, so I believe the battery is not the problem.
Unplugging battery method: Tried unplugging the battery and connect to the computer then plugged it back in with no luck.
Flashtool was not recognized after holding Vol- and connect to the computer.
I also tried different charger and usb
i read from many forum that the battery needs to die in order to reset the kernel. Should I just let the battery discharged? Or are there others ways that are more efficient?
I'm not sure what to do at this point. Any suggestion will be greatly appreciated.
Thank you!
try change battery
Alvian_P said:
try change battery
Click to expand...
Click to collapse
I believe the battery is ok. I brought it to the store to check the charge and it was sufficient
thank you,
Flash phone using Flashtool.
El Solido said:
Flash phone using Flashtool.
Click to expand...
Click to collapse
Unfortunately, the phone is not recognized by flashtool.
Thank you,
maybe bootloader corrupt. bootloader in emmc. try bring your phone to phone services, JTAG flash may help.
Alvian_P said:
maybe bootloader corrupt. bootloader in emmc. try bring your phone to phone services, JTAG flash may help.
Click to expand...
Click to collapse
What software can I use to fix the bootloader? I have an unlocked phone so my service provider will not take care of it.
Thank you!
myphonedied said:
What software can I use to fix the bootloader? I have an unlocked phone so my service provider will not take care of it.
Thank you!
Click to expand...
Click to collapse
Go to phone repair outlets in your city, not in Sony Service Center. usually they can fix hardware problem. I dont know what software are used. I only know with Jtag can repair bootloader via test point.
Alvian_P said:
Go to phone repair outlets in your city, not in Sony Service Center. usually they can fix hardware problem. I dont know what software are used. I only know with Jtag can repair bootloader via test point.
Click to expand...
Click to collapse
Does the bootloader need to be unlocked on the phone previously for the JTAG method to work?
Thank you for the suggestion,
myphonedied said:
Does the bootloader need to be unlocked on the phone previously for the JTAG method to work?
Thank you for the suggestion,
Click to expand...
Click to collapse
not sure. locked or unlocked should work, because the files inject directly to emmc
by the way, have you try to change another battery?
ave you tried to boot the phone into download mode?
Have you tried the actual Sony Tool and the Recovery-Process?
With that i unbricked my Z5 from that symptons i think 2 or 3 times already after the flash went somehow wrong because it stopped midway.
Alvian_P said:
not sure. locked or unlocked should work, because the files inject directly to emmc
by the way, have you try to change another battery?
Click to expand...
Click to collapse
I ordered a new battery, will try that and let you know
Thanks!
Seelbreaker said:
ave you tried to boot the phone into download mode?
Have you tried the actual Sony Tool and the Recovery-Process?
With that i unbricked my Z5 from that symptons i think 2 or 3 times already after the flash went somehow wrong because it stopped midway.
Click to expand...
Click to collapse
The phone won't boot into download mode. It's not recognized by PC companion so I can't carry out the recovery process.
Thank you for the suggestion!
myphonedied said:
I ordered a new battery, will try that and let you know
Thanks!
Click to expand...
Click to collapse
Ok... :good:
myphonedied said:
The phone won't boot into download mode. It's not recognized by PC companion so I can't carry out the recovery process.
Thank you for the suggestion!
Click to expand...
Click to collapse
Another thing - on my Laptop i can't access fastboot mode because it restarts everytime (showing the blue led and then it reboots), therefore i have to attach the Z5 to the Dockingstation.
But it seems like it is completeley dead right?
just to be sure - press and hold vol up and then connect your usb-cable. If the LED stays blue - gg
Then you just have to install the fastboot driver in Test-Mode (reboot to f8 and deactivate the Enforced Driver Signature) and then you may be able to atleast flash or better first boot the phone with a new kernel. If the boot works and then crashes you have your first step to unbrick the phone.
fastboot boot "kernel-image"
Altough i don't have any idea which Kernel you should choose
Seelbreaker said:
Another thing - on my Laptop i can't access fastboot mode because it restarts everytime (showing the blue led and then it reboots), therefore i have to attach the Z5 to the Dockingstation.
But it seems like it is completeley dead right?
just to be sure - press and hold vol up and then connect your usb-cable. If the LED stays blue - gg
Then you just have to install the fastboot driver in Test-Mode (reboot to f8 and deactivate the Enforced Driver Signature) and then you may be able to atleast flash or better first boot the phone with a new kernel. If the boot works and then crashes you have your first step to unbrick the phone.
fastboot boot "kernel-image"
Altough i don't have any idea which Kernel you should choose
Click to expand...
Click to collapse
Red blinking red in Sony phones mean bricked motherboard
Try on different computer. Use USB 2.0 port and original sony cable.
EugenStanis said:
Red blinking red in Sony phones mean bricked motherboard
Click to expand...
Click to collapse
Any way to fix a bricked motherboard?
myphonedied said:
Any way to fix a bricked motherboard?
Click to expand...
Click to collapse
Yes, replacing it
Use setool2 box for unbreak your phone
Hello, this is my first publication...
A few days ago I made the update of my terminal, from version 6.0.1 and I can not flash version 7 from flashtool, everything worked fine, after flashing the computer was up to version 7.1.1, after a few days observe Which at the time of downloading and connecting the computer started with constant restarts or bootloops, until you can turn it on, also the computer occasionally has problems with the speaker, plus flash failure does not turn on ...
All this happened after flashing it
I can not enter the flash mode, pressing the volume button -, the phone turns on the green light and turns off and on again and is not detected by the computer, I would greatly appreciate the help!
Please
- do a hard power off: VOL+ and Off
- do a factory reset
- plug the USB cable to another port
- reinstall USB drivers
- try another cable
- try another PC
DHGE said:
- do a hard power off: VOL+ and Off
- do a factory reset
- plug the USB cable to another port
- reinstall USB drivers
- try another cable
- try another PC
Click to expand...
Click to collapse
Thank you for responding to my post.
- from the hard power off: VOL + and Off
I do it several times, and still nothing
- from the factory reset
It is restored by the sony configuration and neither does the equipment works normal except for the LED flash of the camera, and sometimes the problem of the mentioned speakers
In addition to proving in 3 different computers, with two different cables in addition, installing the drivers and everything, I do not know what else to do, when I connect the phone with fastboot is recognized, or through trasnferencia, there is no problem with that, only the flashmode .
I have the same problem with my XZ but found a workaround. When prompted to turn of your phone and plug it in flash mode reboot the phone instead. When the screen goes black hold the volume down, when the phone turns back on it will go into flash mode. Works for me every time.
Sent from my F8331 using XDA-Developers Legacy app
dachao said:
I have the same problem with my XZ but found a workaround. When prompted to turn of your phone and plug it in flash mode reboot the phone instead. When the screen goes black hold the volume down, when the phone turns back on it will go into flash mode. Works for me every time.
Sent from my F8331 using
Hello, Thanks for replying, try the mentioned method and still flashes the green LED when connecting it in flash mode ...
According to what you said should you restart the phone connected to the usb cable?
Click to expand...
Click to collapse
eduardoamm said:
dachao said:
I have the same problem with my XZ but found a workaround. When prompted to turn of your phone and plug it in flash mode reboot the phone instead. When the screen goes black hold the volume down, when the phone turns back on it will go into flash mode. Works for me every time.
Sent from my F8331 using
Hello, Thanks for replying, try the mentioned method and still flashes the green LED when connecting it in flash mode ...
According to what you said should you restart the phone connected to the usb cable?
Click to expand...
Click to collapse
Yes, connect the phone to the usb cable and restart. It works for me every time.
Sent from my F8331 using XDA-Developers Legacy app
Click to expand...
Click to collapse
dachao said:
eduardoamm said:
Yes, connect the phone to the usb cable and restart. It works for me every time.
Click to expand...
Click to collapse
Still not working, I do not know what I can do to make it work ... thanks for responding
Click to expand...
Click to collapse
Strange enough I reproduce this "flashing green-led" flashmode issue today, but it was the USB cable problem (type c -> type c).
The cable in question can access mtp mode and fastboot mode normally thou.
It is likely not the same issue like yours, but still very strange.
eduardoamm said:
dachao said:
Still not working, I do not know what I can do to make it work ... thanks for responding
Click to expand...
Click to collapse
Was solved your problem?
Click to expand...
Click to collapse
eduardoamm said:
dachao said:
I have the same problem with my XZ but found a workaround. When prompted to turn of your phone and plug it in flash mode reboot the phone instead. When the screen goes black hold the volume down, when the phone turns back on it will go into flash mode. Works for me every time.
Click to expand...
Click to collapse
For me on Xperia Z5 too!! Thanks!!
Click to expand...
Click to collapse
same problem can not enter flashmode but can enter fastbootmode....
I have the same problem.
I've found that my phone does not enter flash mode at the first Led flash, so plug the cable while hoding volume up (fastboot mode), if the led just flashing blue then I hold volume down to get into flash mode. else if it connected in fastboot mode then i just unplug it and do again.
Thanks for the tip! Works well with my Xperia XZ + Lenovo T460 + Aukey USB cable combo.
Had a headache with phone not entering the flash mode. Flashtool said it's connected in recovery mode, usb debugging off. Perhaps sth to do with trying to update the TWRP to the latest version (3.2.2) via the PlayStore app and turning the recovery non-functional. I wanted to update to the latest FW before reflashing TWRP in fastboot mode.
so, i flashed lineage in dualboot on oreo firmware and my phone went completely dead, no download no vibration no response to anything i do to it. i just wanted to ask this question here too, is there any way this device could be brought back to life?
byseby said:
so, i flashed lineage in dualboot on oreo firmware and my phone went completely dead, no download no vibration no response to anything i do to it. i just wanted to ask this question here too, is there any way this device could be brought back to life?
Click to expand...
Click to collapse
When you plug in USB cable does indicator show red?
Try connect to PC what its showing on device manager?
afaneh92 said:
When you plug in USB cable does indicator show red?
Try connect to PC what its showing on device manager?
Click to expand...
Click to collapse
nope, no led, no sound from pc, nothing on device manager, odin says nothing smartswitch nothing, plugging it in does nothing otg in and no power supplied to the attached device
byseby said:
nope, no led, no sound from pc, nothing on device manager, odin says nothing smartswitch nothing, plugging it in does nothing otg in and no power supplied to the attached device
Click to expand...
Click to collapse
Try hold on volume up and down and power button at the same time for 30 second I think its kernel panic.
Also leave phone charging for a few hours and don't touch it see if it also was a bit low battery.
lynxblaine said:
Also leave phone charging for a few hours and don't touch it see if it also was a bit low battery.
Click to expand...
Click to collapse
none of it works, left it overnight and tried every button combo
Power + Volume Down for 10-15 second simulates a battery removal, so try that.
the_scotsman said:
Power + Volume Down for 10-15 second simulates a battery removal, so try that.
Click to expand...
Click to collapse
as i said, i tried every button combo there is to try
byseby said:
as i said, i tried every button combo there is to try
Click to expand...
Click to collapse
Given it's not responding to that, and no lights when plugged into power, I'd say it's probably hard bricked and unrecovaerable. That's the risk when playing with things like dual boot etc I guess. Or just bad luck.
byseby said:
so, i flashed lineage in dualboot on oreo firmware and my phone went completely dead, no download no vibration no response to anything i do to it. i just wanted to ask this question here too, is there any way this device could be brought back to life?
Click to expand...
Click to collapse
I just had the same issue, how did you fix it?
sethchrome45 said:
I just had the same issue, how did you fix it?
Click to expand...
Click to collapse
I opened mine up
I was just thinking about trying Dual Boot ?️.