so, i flashed lineage in dualboot on oreo firmware and my phone went completely dead, no download no vibration no response to anything i do to it. i just wanted to ask this question here too, is there any way this device could be brought back to life?
byseby said:
so, i flashed lineage in dualboot on oreo firmware and my phone went completely dead, no download no vibration no response to anything i do to it. i just wanted to ask this question here too, is there any way this device could be brought back to life?
Click to expand...
Click to collapse
When you plug in USB cable does indicator show red?
Try connect to PC what its showing on device manager?
afaneh92 said:
When you plug in USB cable does indicator show red?
Try connect to PC what its showing on device manager?
Click to expand...
Click to collapse
nope, no led, no sound from pc, nothing on device manager, odin says nothing smartswitch nothing, plugging it in does nothing otg in and no power supplied to the attached device
byseby said:
nope, no led, no sound from pc, nothing on device manager, odin says nothing smartswitch nothing, plugging it in does nothing otg in and no power supplied to the attached device
Click to expand...
Click to collapse
Try hold on volume up and down and power button at the same time for 30 second I think its kernel panic.
Also leave phone charging for a few hours and don't touch it see if it also was a bit low battery.
lynxblaine said:
Also leave phone charging for a few hours and don't touch it see if it also was a bit low battery.
Click to expand...
Click to collapse
none of it works, left it overnight and tried every button combo
Power + Volume Down for 10-15 second simulates a battery removal, so try that.
the_scotsman said:
Power + Volume Down for 10-15 second simulates a battery removal, so try that.
Click to expand...
Click to collapse
as i said, i tried every button combo there is to try
byseby said:
as i said, i tried every button combo there is to try
Click to expand...
Click to collapse
Given it's not responding to that, and no lights when plugged into power, I'd say it's probably hard bricked and unrecovaerable. That's the risk when playing with things like dual boot etc I guess. Or just bad luck.
byseby said:
so, i flashed lineage in dualboot on oreo firmware and my phone went completely dead, no download no vibration no response to anything i do to it. i just wanted to ask this question here too, is there any way this device could be brought back to life?
Click to expand...
Click to collapse
I just had the same issue, how did you fix it?
sethchrome45 said:
I just had the same issue, how did you fix it?
Click to expand...
Click to collapse
I opened mine up
I was just thinking about trying Dual Boot ?️.
Related
So I tried to update from 33R to 38R manually and I do believe I hard bricked the phone, if anyone can tell me or help that would be great.
My Phone
Unlocked
Rooted
TWRP Recovery
Adaway modified system files
CF Lumen modified system files
So I tried to update manually and with modified system files it would not allow me to install the stock 38R update so I tried the modified file found here on XDA that did not work so I read something about restoring to stock.
http://forum.xda-developers.com/oneplus-one/general/xnph38r-ota-update-t2897933
So I fastbooted and uploaded all the images as described on the guide through the command prompt and rebooted. After the reboot it just shut off to a black screen and would not start again. Cannot fastboot nada, tried plugging in the usb cable and no charging light nada.
Any help would be appreciated.
You have to tell us which guide you used and what files you loaded into your phone.
kokocabana said:
You have to tell us which guide you used and what files you loaded into your phone.
Click to expand...
Click to collapse
http://forum.xda-developers.com/oneplus-one/general/guides-bacon-timmaaas-how-to-guides-t2839471
I did #8 but instead of 33R I used 25R files.
So you're still getting absolutely no response from the phone?
Transmitted via Bacon
timmaaa said:
So you're still getting absolutely no response from the phone?
Transmitted via Bacon
Click to expand...
Click to collapse
Yep, it won't turn on, wont see any led when I plug it in to indicate that it is charging , dead...
Tried the power reset that OPO told me to do, hold the power button 5 times for 20 secs each to no avail.
aznalan15 said:
Yep, it won't turn on, wont see any led when I plug it in to indicate that it is charging , dead...
Tried the power reset that OPO told me to do, hold the power button 5 times for 20 secs each to no avail.
Click to expand...
Click to collapse
Leave it connected to the charger for 24 hours, don't touch it in that time, and then try again.
Transmitted via Bacon
timmaaa said:
Leave it connected to the charger for 24 hours, don't touch it in that time, and then try again.
Transmitted via Bacon
Click to expand...
Click to collapse
Well couldn't wait 24 hours but didn't think it would matter... at 21 hours still nothing.
Plug your phone into your computer. Go into Device Manager. Is there anything that says "QHSUSB_BULK"? Or anything that says "QHSUSB" or "Qualcomm High-Speed" in the name?
treChoy said:
Plug your phone into your computer. Go into Device Manager. Is there anything that says "QHSUSB_BULK"? Or anything that says "QHSUSB" or "Qualcomm High-Speed" in the name?
Click to expand...
Click to collapse
Nothing show's up because it won't even boot.
aznalan15 said:
Nothing show's up because it won't even boot.
Click to expand...
Click to collapse
There's a special mode that should show up, regardless of whether your device will boot or not. Hold the power button for ~60 seconds, and plug your phone into your computer. Nothing should show on your phone. Then check your Device Manager. There should be something relating to the terms I posted above. If that doesn't work, try holding the power button for 60 seconds while the phone is plugged into the computer.
treChoy said:
There's a special mode that should show up, regardless of whether your device will boot or not. Hold the power button for ~60 seconds, and plug your phone into your computer. Nothing should show on your phone. Then check your Device Manager. There should be something relating to the terms I posted above. If that doesn't work, try holding the power button for 60 seconds while the phone is plugged into the computer.
Click to expand...
Click to collapse
Yah just tried nothing shows up on Device Manager with QUAL or etc.
Check out this link: http://forum.xda-developers.com/one...een-fastboot-adb-t2835696/page16#post55129486
I've got a z5 dual e6683 not working properly for 6 months.
Some day, it just started not charging when the phone was on. I waited till battery died, then plugged it in wall charger and it got up to 100%. I managed to start the phone and then it was ok. I charged it a couple of time in 2 days, and then suddenly doesn't recognizes charge anymore... I also can't turn it off; when i turn off, it stops and restarts immediatly in bootloop. I managed to force it to stop by pressing power and both + and - volume but even then its not totally off, it still displays battery level...... Any ideas ?
Thanks
Wait for battery do die completely, then hold volume down and plug usb cable if it turns green then flashmode works and you can flash new firmware, maybe it will fix the issue
L33Tgod said:
Wait for battery do die completely, then hold volume down and plug usb cable if it turns green then flashmode works and you can flash new firmware, maybe it will fix the issue
Click to expand...
Click to collapse
i'm gonna try that. Do you have any idea which firmware i can use ? I actually have 32.2.A.5.11 RU.
jackijumbo90 said:
i'm gonna try that. Do you have any idea which firmware i can use ? I actually have 32.2.A.5.11 RU.
Click to expand...
Click to collapse
try reflashing, but do clean wipe
L33Tgod said:
try reflashing, but do clean wipe
Click to expand...
Click to collapse
I managed to boot in flashmode and flash a previous version of the same firmware but i'm still experiencing the same problems......
did it fall in water by any chance?
a00r said:
did it fall in water by any chance?
Click to expand...
Click to collapse
no, it didn't fall. I used it whithout any problem during 6 months and then it just strated buging... Sony won't take it under warranty since i bought it from Hong kong (no dual sim version in Europe at the time...)
another symptom is that, when flashtool is done and says disconnect and restart, i disconnect the phone from the computer and it boots on its own...
jackijumbo90 said:
another symptom is that, when flashtool is done and says disconnect and restart, i disconnect the phone from the computer and it boots on its own...
Click to expand...
Click to collapse
try selecting all to wipe in flashtool if you dont have any important files on it
L33Tgod said:
try selecting all to wipe in flashtool if you dont have any important files on it
Click to expand...
Click to collapse
that's what i did.
jackijumbo90 said:
that's what i did.
Click to expand...
Click to collapse
well go to service, not sony, but normal service and ask are they familiar with that behaviour
I was using lrteam twrp 3.4.2b-1206 and I was sideloading the vendor update for 12.2.1.0 when the progress bar froze. I gave it 10 minutes and held the power button to reboot and now the phone is showing no signs of life i cant get it to even show the poco screen. I've got no ideas left on what to do.
ashawanz said:
I was using lrteam twrp 3.4.2b-1206 and I was sideloading the vendor update for 12.2.1.0 when the progress bar froze. I gave it 10 minutes and held the power button to reboot and now the phone is showing no signs of life i cant get it to even show the poco screen. I've got no ideas left on what to do.
Click to expand...
Click to collapse
Did you try holding power and volume down? Also charge it for some hours.
Tecardo said:
Did you try holding power and volume down? Also charge it for some hours.
Click to expand...
Click to collapse
yeah no combination of buttons will show any signs of life and i can't even get to the bootloader. It should be at 100% battery at this point i dont think that's the issue either
Where did you find vendor update for 12.2.1.0 ?
NOSS8 said:
Where did you find vendor update for 12.2.1.0 ?
Click to expand...
Click to collapse
Some users postet from Xiaomi firmware website (non official) . Link is in many rom threads
ashawanz said:
yeah no combination of buttons will show any signs of life and i can't even get to the bootloader. It should be at 100% battery at this point i dont think that's the issue either
Click to expand...
Click to collapse
Did you attach it to pc and see what device gets detected then? It could be in qualcomm usb mode
Tecardo said:
Some users postet from Xiaomi firmware website (non official) . Link is in many rom threads
Click to expand...
Click to collapse
Firmeware not vendor,not the same.
is the phone appear on pc?
Tecardo said:
Did you attach it to pc and see what device gets detected then? It could be in qualcomm usb mode
Click to expand...
Click to collapse
If the the phone appear in qualcom usb, flashing in EDL will be possible and requires an authorization that only official repairers have.
NOSS8 said:
Firmeware not vendor,not the same.
is the phone appear on pc?
Click to expand...
Click to collapse
as I remember it's included? Otherwise use Xiaomi eu rom. It's including vendor.
Tecardo said:
as I remember it's included? Otherwise use Xiaomi eu rom. It's including vendor.
Click to expand...
Click to collapse
My first question was for ashawanz" Where did you find vendor update for 12.2.1.0 ? "
and this answer" If the the phone appear in qualcom usb, flashing in EDL will be possible and requires an authorization that only official repairers have" was not intended for you 'my mistake' but still for ashawanz
ashawanz said:
yeah no combination of buttons will show any signs of life and i can't even get to the bootloader. It should be at 100% battery at this point i dont think that's the issue either
Click to expand...
Click to collapse
Where did you find vendor update for 12.2.1.0 ?
Firmeware not vendor,not the same.
is the phone appear on pc?
If the the phone appear in qualcom usb, flashing in EDL will be possible and requires an authorization that only official repairers have.
Tecardo said:
Did you attach it to pc and see what device gets detected then? It could be in qualcomm usb mode
Click to expand...
Click to collapse
So I just took the device apart to try and get into qualcomm edl mode through hardware and now the front camera led turns red while charging. apart from that there are no signs of life though it won't show up in my pc's device manager even though I have the qualcomm drivers
ashawanz said:
So I just took the device apart to try and get into qualcomm edl mode through hardware and now the front camera led turns red while charging. apart from that there are no signs of life though it won't show up in my pc's device manager even though I have the qualcomm drivers
Click to expand...
Click to collapse
So you should let it charge till later in 6h
NOSS8 said:
Where did you find vendor update for 12.2.1.0 ?
Firmeware not vendor,not the same.
is the phone appear on pc?
If the the phone appear in qualcom usb, flashing in EDL will be possible and requires an authorization that only official repairers have.
Click to expand...
Click to collapse
Phone does not appear on pc and I got it from the evoX 5.1 thread. Ive flashed it before however and it didn't do this it worked just fine
ashawanz said:
Phone does not appear on pc and I got it from the evoX 5.1 thread. Ive flashed it before however and it didn't do this it worked just fine
Click to expand...
Click to collapse
This is the correct firmware.
What do you want to do in EDL mode?
NOSS8 said:
This is the correct firmware.
What do you want to do in EDL mode?
Click to expand...
Click to collapse
It's not booting, he doesn't want to get into edl. It's showing no reaction. But he could try pressing power button for 1min and look for vibration
To try to restore the phone yourself, you must use commands in fastboot or adb.
Tecardo said:
It's not booting, he doesn't want to get into edl. It's showing no reaction. But he could try pressing power button for 1min and look for vibration
Click to expand...
Click to collapse
the power button for a minute didnt do anything either sadly. Im trying to get into edl so i can try and recover it with QPST, but even after opening the phone up and trying to get into edl through hardware, i was only able to get the red charging light to start showing whilst charging. Should I try to disconnect and reconnect the battery maybe?
ashawanz said:
the power button for a minute didnt do anything either sadly. Im trying to get into edl so i can try and recover it with QPST, but even after opening the phone up and trying to get into edl through hardware, i was only able to get the red charging light to start showing whilst charging. Should I try to disconnect and reconnect the battery maybe?
Click to expand...
Click to collapse
Yep, can't hurt at this point.
You can try this:
Recharge the battery for at least 1 hour (even if you think it is already charged)
after connect it by usb and press the power button first,power button with volume -, button with volume +, and try to see if it appears on the pc and in what way.
i dont know why but my phone for some reason stopped working while being on my table, it didnt boot up or vibrate also it didnt show anything on the display.
elosanta said:
i dont know why but my phone for some reason stopped working while being on my table, it didnt boot up or vibrate also it didnt show anything on the display.
Click to expand...
Click to collapse
If you plug it into your computer, does it show up in Device Manager as anything?
Have you tried holding down the power button for 10 seconds?
V0latyle said:
If you plug it into your computer, does it show up in Device Manager as anything?
Have you tried holding down the power button for 10 seconds?
Click to expand...
Click to collapse
neither of those work.
elosanta said:
neither of those work.
Click to expand...
Click to collapse
I'm afraid your device is bricked, and the only thing you can do is take it to a repair shop.
Have you tried booting in download mode?
Yosoygodot said:
Have you tried booting in download mode?
Click to expand...
Click to collapse
yes, it dosent show like anything on the display when booting to download mode
Check if odin recognises it or if it draws current while charging
Yosoygodot said:
Check if odin recognises it or if it draws current while charging
Click to expand...
Click to collapse
It actually gives power, odin dosent recognize it and also device manager it shows nothing
Hello, please help. I have a big problem.
I just flashed custom ROM and the installation was successful. When I restarted the phone, it stopped at the "Samsung Galaxy" logo and did not complete and then restarted automatically in this case. I tried to enter twrp, but to no avail. I also tried Entering the download mode, but also it does not work
I hope that someone will help me, and is this how the phone was damaged, or is there hope to recover it?
Try holding power and volume down for over 20 seconds, after the phone reboot keep holding those keys and hope you get into download mode
Zakaria2328 said:
Try holding power and volume down for over 20 seconds, after the phone reboot keep holding those keys and hope you get into download mode
Click to expand...
Click to collapse
Thx bro, but it didn't work
mhmdhousni said:
Thx bro, but it didn't work
Click to expand...
Click to collapse
Does Odin recognise the phone?
mhmdhousni said:
Hello, please help. I have a big problem.
I just flashed custom ROM and the installation was successful. When I restarted the phone, it stopped at the "Samsung Galaxy" logo and did not complete and then restarted automatically in this case. I tried to enter twrp, but to no avail. I also tried Entering the download mode, but also it does not work
I hope that someone will help me, and is this how the phone was damaged, or is there hope to recover it?
Click to expand...
Click to collapse
completely switch off the phone. hold volume up and volume down together and connect usb cable.
Zakaria2328 said:
Does Odin recognise the phone?
Click to expand...
Click to collapse
Unfortunately not, I even tried to enter it into download mode by pressing the volume up and down buttons and then connecting the USB, and it did not work, so I think it may need a board
mvikrant97 said:
completely switch off the phone. hold volume up and volume down together and connect usb cable.
Click to expand...
Click to collapse
I tried this and it didn't work either
mhmdhousni said:
I tried this and it didn't work either
Click to expand...
Click to collapse
Can you disassemble the phone and remove the battery and reconnect it again and try to put it into download mode?
mvikrant97 said:
Can you disassemble the phone and remove the battery and reconnect it again and try to put it into download mode?
Click to expand...
Click to collapse
Honestly, no, I haven't tried jaw before But I waited until the battery ran out and tried again to insert the download, but it didn't work either,,, I have a question I first formatted and then installed the ROM, then it succeeded, but after the word “installation was successful” there were words in red “failed mount system root” Then I flashed the rest of the ROM files, then I thought it was over, so I restarted, but it stopped at the "samsung galay - secured by Knox" logo. It does not continue and then restarts itself in this case and does not stop until the battery runs out and stops then I tried to enter the recovery but to no avail and also the same thing with the download mode,, summarizing all this does the phone need a motherboard, or that the matter can be solved?
mhmdhousni said:
Honestly, no, I haven't tried jaw before But I waited until the battery ran out and tried again to insert the download, but it didn't work either,,, I have a question I first formatted and then installed the ROM, then it succeeded, but after the word “installation was successful” there were words in red “failed mount system root” Then I flashed the rest of the ROM files, then I thought it was over, so I restarted, but it stopped at the "samsung galay - secured by Knox" logo. It does not continue and then restarts itself in this case and does not stop until the battery runs out and stops then I tried to enter the recovery but to no avail and also the same thing with the download mode,, summarizing all this does the phone need a motherboard, or that the matter can be solved?
Click to expand...
Click to collapse
It can be solved. It doesn't need a motherboard.
Try Chimera tool. It can fix dead boot. You may need to short test point of your phone so that the software recognises your phone.
mvikrant97 said:
It can be solved. It doesn't need a motherboard.
Try Chimera tool. It can fix dead boot. You may need to short test point of your phone so that the software recognises your phone.
Click to expand...
Click to collapse
I really appreciate your help, but can you tell me how to use it? I will do this later because I am busy during this period
mhmdhousni said:
I really appreciate your help, but can you tell me how to use it? I will do this later because I am busy during this period
Click to expand...
Click to collapse
Yeah sure. Its pretty straight forward. You can find tutorials on YouTube.
mvikrant97 said:
Yeah sure. Its pretty straight forward. You can find tutorials on YouTube.
Click to expand...
Click to collapse
Well, I'll look into it, thank u sir <3