Related
My brother's htc sensation xe mob turned of suddenly and when tried to turn on mob it din't give anything only the soft button light and screen black .. he was using viper rom ..any idea about what happen with mob? P.s when i connect the mob to pc it give android phone but with yellow triangle and when try volume down with power button not give anyyhing too and soft button turn on and off simultaneously and when plug the charger while tge phone is off the led lamp give orange light for a sec then turn off again see screenshot
Ahmed.ragab said:
My brother's htc sensation xe mob turned of suddenly and when tried to turn on mob it din't give anything only the soft button light and screen black .. he was using viper rom ..any idea about what happen with mob? P.s when i connect the mob to pc it give android phone but with yellow triangle and when try volume down with power button not give anyyhing too and soft button turn on and off simultaneously and when plug the charger while tge phone is off the led lamp give orange light for a sec then turn off again see screenshot
Click to expand...
Click to collapse
I think luckily u havn't brick ur device.It is a hardware problem.
remove the battery and put it back
then try to boot into bootloader
if you boot select reboot
rzr86 said:
remove the battery and put it back
then try to boot into bootloader
if you boot select reboot
Click to expand...
Click to collapse
I can't boot into bootloader when i try thr soft key turn on and off simultaneously and screen is dark P.s (my brother put it in his pocket then he get it out to see it like that ? I thought maybe there is something wrong with screen but i tried to open mob normally till the soft key became light and never turn off then tried to make make a call to see if the mob will ring it said the mob is closed so i think this isn't about the screen any Idea ?
Any Idea ?
the 1st screenshot is when i connect my mob to the charger only soft key light on and never off
the 2nd screenshot is when I connected my mob to the pc and try to go to bootlooder with ADB
the 3rd screenshot is when i try to connect it with KGS utility (in all cases screen is always black)
Ahmed.ragab said:
Any Idea ?
the 1st screenshot is when i connect my mob to the charger only soft key light on and never off
the 2nd screenshot is when I connected my mob to the pc and try to go to bootlooder with ADB
the 3rd screenshot is when i try to connect it with KGS utility (in all cases screen is always black)
Click to expand...
Click to collapse
in adb mode your device is being recognized
when you are entering adb reboot bootloader what happens?
rzr86 said:
in adb mode your device is being recognized
when you are entering adb reboot bootloader what happens?
Click to expand...
Click to collapse
Nothing happen it's like the SS
Ahmed.ragab said:
Nothing happen it's like the SS
Click to expand...
Click to collapse
did you try to boot into safe mode?
rzr86 said:
did you try to boot into safe mode?
Click to expand...
Click to collapse
I can't boot into safe mode .. screen light never turned on and when i try to switch on mob normally thr green light turn on then turn off again and the mob vibrate and the soft key light always turn on anf after while it turn off and by just preesing volume up otlr power button it light again
Ahmed.ragab said:
I can't boot into safe mode .. screen light never turned on and when i try to switch on mob normally thr green light turn on then turn off again and the mob vibrate and the soft key light always turn on anf after while it turn off and by just preesing volume up otlr power button it light again
Click to expand...
Click to collapse
did you try to use a ruu.exe?
i am thinking that it could be a hardware issue
rzr86 said:
did you try to use a ruu.exe?
i am thinking that it could be a hardware issue
Click to expand...
Click to collapse
I'm trying to charge my battery more than 30 % cause he don't wanna continue installing and i have a slow external charger and will back to you again
It say rebooting to bootloader and stop in this stage see the SS
Ahmed.ragab said:
I'm trying to charge my battery more than 30 % cause he don't wanna continue installing and i have a slow external charger and will back to you again
It say rebooting to bootloader and stop in this stage see the SS
Click to expand...
Click to collapse
i don't know what to suggest anymore mate
probably it is hardware
rzr86 said:
i don't know what to suggest anymore mate
probably it is hardware
Click to expand...
Click to collapse
but do u think if it is a hardware it would read as android phone on pc normally but can't restart to bootloader ?
Ahmed.ragab said:
but do u think if it is a hardware it would read as android phone on pc normally but can't restart to bootloader ?
Click to expand...
Click to collapse
maybe some partition is damaged
rzr86 said:
maybe some partition is damaged
Click to expand...
Click to collapse
so how to repair this partitions ?
Ahmed.ragab said:
so how to repair this partitions ?
Click to expand...
Click to collapse
i really don't know mate
search here in xda
maybe you will find something about it
edit: did you try the unbricking project?
otherwise see this thread
http://forum.xda-developers.com/showthread.php?t=2775115
rzr86 said:
i really don't know mate
search here in xda
maybe you will find something about it
edit: did you try the unbricking project?
otherwise see this thread
http://forum.xda-developers.com/showthread.php?t=2775115
Click to expand...
Click to collapse
i tried unbricking project but ubuntu can't recognize my mob in QHSUSB_DLOAD mod without battery And ubuntu can't recognize my mob totally
rashmifantasy said:
I think luckily u havn't brick ur device.It is a hardware problem.
Click to expand...
Click to collapse
rzr86 said:
remove the battery and put it back
then try to boot into bootloader
if you boot select reboot
Click to expand...
Click to collapse
rzr86 said:
i really don't know mate
search here in xda
maybe you will find something about it
edit: did you try the unbricking project?
otherwise see this thread
http://forum.xda-developers.com/showthread.php?t=2775115
Click to expand...
Click to collapse
I repaired it guys the problem was with the lcd screen I replaced my sensation xe screen with my friends's sensation and it is working good now
So I tried to update from 33R to 38R manually and I do believe I hard bricked the phone, if anyone can tell me or help that would be great.
My Phone
Unlocked
Rooted
TWRP Recovery
Adaway modified system files
CF Lumen modified system files
So I tried to update manually and with modified system files it would not allow me to install the stock 38R update so I tried the modified file found here on XDA that did not work so I read something about restoring to stock.
http://forum.xda-developers.com/oneplus-one/general/xnph38r-ota-update-t2897933
So I fastbooted and uploaded all the images as described on the guide through the command prompt and rebooted. After the reboot it just shut off to a black screen and would not start again. Cannot fastboot nada, tried plugging in the usb cable and no charging light nada.
Any help would be appreciated.
You have to tell us which guide you used and what files you loaded into your phone.
kokocabana said:
You have to tell us which guide you used and what files you loaded into your phone.
Click to expand...
Click to collapse
http://forum.xda-developers.com/oneplus-one/general/guides-bacon-timmaaas-how-to-guides-t2839471
I did #8 but instead of 33R I used 25R files.
So you're still getting absolutely no response from the phone?
Transmitted via Bacon
timmaaa said:
So you're still getting absolutely no response from the phone?
Transmitted via Bacon
Click to expand...
Click to collapse
Yep, it won't turn on, wont see any led when I plug it in to indicate that it is charging , dead...
Tried the power reset that OPO told me to do, hold the power button 5 times for 20 secs each to no avail.
aznalan15 said:
Yep, it won't turn on, wont see any led when I plug it in to indicate that it is charging , dead...
Tried the power reset that OPO told me to do, hold the power button 5 times for 20 secs each to no avail.
Click to expand...
Click to collapse
Leave it connected to the charger for 24 hours, don't touch it in that time, and then try again.
Transmitted via Bacon
timmaaa said:
Leave it connected to the charger for 24 hours, don't touch it in that time, and then try again.
Transmitted via Bacon
Click to expand...
Click to collapse
Well couldn't wait 24 hours but didn't think it would matter... at 21 hours still nothing.
Plug your phone into your computer. Go into Device Manager. Is there anything that says "QHSUSB_BULK"? Or anything that says "QHSUSB" or "Qualcomm High-Speed" in the name?
treChoy said:
Plug your phone into your computer. Go into Device Manager. Is there anything that says "QHSUSB_BULK"? Or anything that says "QHSUSB" or "Qualcomm High-Speed" in the name?
Click to expand...
Click to collapse
Nothing show's up because it won't even boot.
aznalan15 said:
Nothing show's up because it won't even boot.
Click to expand...
Click to collapse
There's a special mode that should show up, regardless of whether your device will boot or not. Hold the power button for ~60 seconds, and plug your phone into your computer. Nothing should show on your phone. Then check your Device Manager. There should be something relating to the terms I posted above. If that doesn't work, try holding the power button for 60 seconds while the phone is plugged into the computer.
treChoy said:
There's a special mode that should show up, regardless of whether your device will boot or not. Hold the power button for ~60 seconds, and plug your phone into your computer. Nothing should show on your phone. Then check your Device Manager. There should be something relating to the terms I posted above. If that doesn't work, try holding the power button for 60 seconds while the phone is plugged into the computer.
Click to expand...
Click to collapse
Yah just tried nothing shows up on Device Manager with QUAL or etc.
Check out this link: http://forum.xda-developers.com/one...een-fastboot-adb-t2835696/page16#post55129486
so, i flashed lineage in dualboot on oreo firmware and my phone went completely dead, no download no vibration no response to anything i do to it. i just wanted to ask this question here too, is there any way this device could be brought back to life?
byseby said:
so, i flashed lineage in dualboot on oreo firmware and my phone went completely dead, no download no vibration no response to anything i do to it. i just wanted to ask this question here too, is there any way this device could be brought back to life?
Click to expand...
Click to collapse
When you plug in USB cable does indicator show red?
Try connect to PC what its showing on device manager?
afaneh92 said:
When you plug in USB cable does indicator show red?
Try connect to PC what its showing on device manager?
Click to expand...
Click to collapse
nope, no led, no sound from pc, nothing on device manager, odin says nothing smartswitch nothing, plugging it in does nothing otg in and no power supplied to the attached device
byseby said:
nope, no led, no sound from pc, nothing on device manager, odin says nothing smartswitch nothing, plugging it in does nothing otg in and no power supplied to the attached device
Click to expand...
Click to collapse
Try hold on volume up and down and power button at the same time for 30 second I think its kernel panic.
Also leave phone charging for a few hours and don't touch it see if it also was a bit low battery.
lynxblaine said:
Also leave phone charging for a few hours and don't touch it see if it also was a bit low battery.
Click to expand...
Click to collapse
none of it works, left it overnight and tried every button combo
Power + Volume Down for 10-15 second simulates a battery removal, so try that.
the_scotsman said:
Power + Volume Down for 10-15 second simulates a battery removal, so try that.
Click to expand...
Click to collapse
as i said, i tried every button combo there is to try
byseby said:
as i said, i tried every button combo there is to try
Click to expand...
Click to collapse
Given it's not responding to that, and no lights when plugged into power, I'd say it's probably hard bricked and unrecovaerable. That's the risk when playing with things like dual boot etc I guess. Or just bad luck.
byseby said:
so, i flashed lineage in dualboot on oreo firmware and my phone went completely dead, no download no vibration no response to anything i do to it. i just wanted to ask this question here too, is there any way this device could be brought back to life?
Click to expand...
Click to collapse
I just had the same issue, how did you fix it?
sethchrome45 said:
I just had the same issue, how did you fix it?
Click to expand...
Click to collapse
I opened mine up
I was just thinking about trying Dual Boot ?️.
I was using lrteam twrp 3.4.2b-1206 and I was sideloading the vendor update for 12.2.1.0 when the progress bar froze. I gave it 10 minutes and held the power button to reboot and now the phone is showing no signs of life i cant get it to even show the poco screen. I've got no ideas left on what to do.
ashawanz said:
I was using lrteam twrp 3.4.2b-1206 and I was sideloading the vendor update for 12.2.1.0 when the progress bar froze. I gave it 10 minutes and held the power button to reboot and now the phone is showing no signs of life i cant get it to even show the poco screen. I've got no ideas left on what to do.
Click to expand...
Click to collapse
Did you try holding power and volume down? Also charge it for some hours.
Tecardo said:
Did you try holding power and volume down? Also charge it for some hours.
Click to expand...
Click to collapse
yeah no combination of buttons will show any signs of life and i can't even get to the bootloader. It should be at 100% battery at this point i dont think that's the issue either
Where did you find vendor update for 12.2.1.0 ?
NOSS8 said:
Where did you find vendor update for 12.2.1.0 ?
Click to expand...
Click to collapse
Some users postet from Xiaomi firmware website (non official) . Link is in many rom threads
ashawanz said:
yeah no combination of buttons will show any signs of life and i can't even get to the bootloader. It should be at 100% battery at this point i dont think that's the issue either
Click to expand...
Click to collapse
Did you attach it to pc and see what device gets detected then? It could be in qualcomm usb mode
Tecardo said:
Some users postet from Xiaomi firmware website (non official) . Link is in many rom threads
Click to expand...
Click to collapse
Firmeware not vendor,not the same.
is the phone appear on pc?
Tecardo said:
Did you attach it to pc and see what device gets detected then? It could be in qualcomm usb mode
Click to expand...
Click to collapse
If the the phone appear in qualcom usb, flashing in EDL will be possible and requires an authorization that only official repairers have.
NOSS8 said:
Firmeware not vendor,not the same.
is the phone appear on pc?
Click to expand...
Click to collapse
as I remember it's included? Otherwise use Xiaomi eu rom. It's including vendor.
Tecardo said:
as I remember it's included? Otherwise use Xiaomi eu rom. It's including vendor.
Click to expand...
Click to collapse
My first question was for ashawanz" Where did you find vendor update for 12.2.1.0 ? "
and this answer" If the the phone appear in qualcom usb, flashing in EDL will be possible and requires an authorization that only official repairers have" was not intended for you 'my mistake' but still for ashawanz
ashawanz said:
yeah no combination of buttons will show any signs of life and i can't even get to the bootloader. It should be at 100% battery at this point i dont think that's the issue either
Click to expand...
Click to collapse
Where did you find vendor update for 12.2.1.0 ?
Firmeware not vendor,not the same.
is the phone appear on pc?
If the the phone appear in qualcom usb, flashing in EDL will be possible and requires an authorization that only official repairers have.
Tecardo said:
Did you attach it to pc and see what device gets detected then? It could be in qualcomm usb mode
Click to expand...
Click to collapse
So I just took the device apart to try and get into qualcomm edl mode through hardware and now the front camera led turns red while charging. apart from that there are no signs of life though it won't show up in my pc's device manager even though I have the qualcomm drivers
ashawanz said:
So I just took the device apart to try and get into qualcomm edl mode through hardware and now the front camera led turns red while charging. apart from that there are no signs of life though it won't show up in my pc's device manager even though I have the qualcomm drivers
Click to expand...
Click to collapse
So you should let it charge till later in 6h
NOSS8 said:
Where did you find vendor update for 12.2.1.0 ?
Firmeware not vendor,not the same.
is the phone appear on pc?
If the the phone appear in qualcom usb, flashing in EDL will be possible and requires an authorization that only official repairers have.
Click to expand...
Click to collapse
Phone does not appear on pc and I got it from the evoX 5.1 thread. Ive flashed it before however and it didn't do this it worked just fine
ashawanz said:
Phone does not appear on pc and I got it from the evoX 5.1 thread. Ive flashed it before however and it didn't do this it worked just fine
Click to expand...
Click to collapse
This is the correct firmware.
What do you want to do in EDL mode?
NOSS8 said:
This is the correct firmware.
What do you want to do in EDL mode?
Click to expand...
Click to collapse
It's not booting, he doesn't want to get into edl. It's showing no reaction. But he could try pressing power button for 1min and look for vibration
To try to restore the phone yourself, you must use commands in fastboot or adb.
Tecardo said:
It's not booting, he doesn't want to get into edl. It's showing no reaction. But he could try pressing power button for 1min and look for vibration
Click to expand...
Click to collapse
the power button for a minute didnt do anything either sadly. Im trying to get into edl so i can try and recover it with QPST, but even after opening the phone up and trying to get into edl through hardware, i was only able to get the red charging light to start showing whilst charging. Should I try to disconnect and reconnect the battery maybe?
ashawanz said:
the power button for a minute didnt do anything either sadly. Im trying to get into edl so i can try and recover it with QPST, but even after opening the phone up and trying to get into edl through hardware, i was only able to get the red charging light to start showing whilst charging. Should I try to disconnect and reconnect the battery maybe?
Click to expand...
Click to collapse
Yep, can't hurt at this point.
You can try this:
Recharge the battery for at least 1 hour (even if you think it is already charged)
after connect it by usb and press the power button first,power button with volume -, button with volume +, and try to see if it appears on the pc and in what way.
Hello, please help. I have a big problem.
I just flashed custom ROM and the installation was successful. When I restarted the phone, it stopped at the "Samsung Galaxy" logo and did not complete and then restarted automatically in this case. I tried to enter twrp, but to no avail. I also tried Entering the download mode, but also it does not work
I hope that someone will help me, and is this how the phone was damaged, or is there hope to recover it?
Try holding power and volume down for over 20 seconds, after the phone reboot keep holding those keys and hope you get into download mode
Zakaria2328 said:
Try holding power and volume down for over 20 seconds, after the phone reboot keep holding those keys and hope you get into download mode
Click to expand...
Click to collapse
Thx bro, but it didn't work
mhmdhousni said:
Thx bro, but it didn't work
Click to expand...
Click to collapse
Does Odin recognise the phone?
mhmdhousni said:
Hello, please help. I have a big problem.
I just flashed custom ROM and the installation was successful. When I restarted the phone, it stopped at the "Samsung Galaxy" logo and did not complete and then restarted automatically in this case. I tried to enter twrp, but to no avail. I also tried Entering the download mode, but also it does not work
I hope that someone will help me, and is this how the phone was damaged, or is there hope to recover it?
Click to expand...
Click to collapse
completely switch off the phone. hold volume up and volume down together and connect usb cable.
Zakaria2328 said:
Does Odin recognise the phone?
Click to expand...
Click to collapse
Unfortunately not, I even tried to enter it into download mode by pressing the volume up and down buttons and then connecting the USB, and it did not work, so I think it may need a board
mvikrant97 said:
completely switch off the phone. hold volume up and volume down together and connect usb cable.
Click to expand...
Click to collapse
I tried this and it didn't work either
mhmdhousni said:
I tried this and it didn't work either
Click to expand...
Click to collapse
Can you disassemble the phone and remove the battery and reconnect it again and try to put it into download mode?
mvikrant97 said:
Can you disassemble the phone and remove the battery and reconnect it again and try to put it into download mode?
Click to expand...
Click to collapse
Honestly, no, I haven't tried jaw before But I waited until the battery ran out and tried again to insert the download, but it didn't work either,,, I have a question I first formatted and then installed the ROM, then it succeeded, but after the word “installation was successful” there were words in red “failed mount system root” Then I flashed the rest of the ROM files, then I thought it was over, so I restarted, but it stopped at the "samsung galay - secured by Knox" logo. It does not continue and then restarts itself in this case and does not stop until the battery runs out and stops then I tried to enter the recovery but to no avail and also the same thing with the download mode,, summarizing all this does the phone need a motherboard, or that the matter can be solved?
mhmdhousni said:
Honestly, no, I haven't tried jaw before But I waited until the battery ran out and tried again to insert the download, but it didn't work either,,, I have a question I first formatted and then installed the ROM, then it succeeded, but after the word “installation was successful” there were words in red “failed mount system root” Then I flashed the rest of the ROM files, then I thought it was over, so I restarted, but it stopped at the "samsung galay - secured by Knox" logo. It does not continue and then restarts itself in this case and does not stop until the battery runs out and stops then I tried to enter the recovery but to no avail and also the same thing with the download mode,, summarizing all this does the phone need a motherboard, or that the matter can be solved?
Click to expand...
Click to collapse
It can be solved. It doesn't need a motherboard.
Try Chimera tool. It can fix dead boot. You may need to short test point of your phone so that the software recognises your phone.
mvikrant97 said:
It can be solved. It doesn't need a motherboard.
Try Chimera tool. It can fix dead boot. You may need to short test point of your phone so that the software recognises your phone.
Click to expand...
Click to collapse
I really appreciate your help, but can you tell me how to use it? I will do this later because I am busy during this period
mhmdhousni said:
I really appreciate your help, but can you tell me how to use it? I will do this later because I am busy during this period
Click to expand...
Click to collapse
Yeah sure. Its pretty straight forward. You can find tutorials on YouTube.
mvikrant97 said:
Yeah sure. Its pretty straight forward. You can find tutorials on YouTube.
Click to expand...
Click to collapse
Well, I'll look into it, thank u sir <3