Database Info

Karbonn A51 Pattern Unlock / Flash Process

After too many google on the net i finally success to unlock Pattern of my Karbonn A51.
Requirement Download Here :
SPD Driver:
http://www.4shared.com/rar/fhrCvLQH/spd_sci-android-usb-driver-jun.html?cau2=403tNull&ua=WINDOWS
Flasher :
http://www.mediafire.com/download/ba3gmetsv9b6sl1/Spd+Factory+flasher.rar
or search for ReserchDownload/upgradedownload/spdflash factory tool (best V. 2.9.7002)
Firmware: (Soft Ver. 1.10)
https://hotfile.com/list/2276623/ee2d399
Process:
1. install all required driver into PC.
2. open SPD tool
3. open and select flash file (.PAC)
4. switch off mobile / remove battery / insert battery.
5. click start button (play button in tool)
6. press and hold vol+ button and insert USB while holding vol+
Process started..
just calm and sit back untill a green Passed message not appear into tool.
now remove USB, remove and reinsert battery and start.
its done....:good:

links not working

this method only works if you have USB debugging enabled on your phone, right?

[ROM][MIUI 7][4.4.2] HongMi Note 1W - MTK6592

Greetings,
This ROM is only for Xiaomi Note 1W / HM Note 1W with MT6592 chipset.
Please flash it using SP Flash Tools.
GAPPS Not Included!
Unroot
DOWNLOAD ROM
DOWNLOAD MTK65xx Drivers
DOWNLOAD SP Flash Tools
Simple Guide For Flashing Bricked Device :
Requirements :
Phone
USB Cable
Computer / Laptop
- Remove battery from phone.
- Open SP Flash Tools
- Load Scatter file from downloaded ROM folder
- Choose Download only and press DOWNLOAD button.
- Connect your device using USB cable
- PC will install driver - MTK preloader driver
- SP flash tools will start to flash device, just wait until "green circle" popup on screen.
- Unplug USB > Insert battery > Turn ON
First time boot will take some time around 5-10minutes.
** In case if Error while Flashing
- Please change download mode to Firmware Upgrade and DOWNLOAD again.
** For dead phone ( Not power ON, not charging )
- Please refer to this thread. Same methods applied.
Good Luck!

root vibe shot 6.0 ver or z90-a40 for root ::::::::: 1ST : Unlock BootLoader 1

for root :::::::::
1ST : Unlock BootLoader
1. Install the software package QPST and drivers LenovoUsbDriver , QualcommUSBDrivers on your computer ( drivers are archived Service QPST programs )
2. Unpack the archive Z90a40_Android-L_unlock_7M.7z to the root of any drive.
3. Connect the device ( Z90a40 ) to a PC via USB-cable.
4. On your device, turn on debugging by the ADB .
5. Run the utility QFIL :
- in the line Select Build Type , select the Flat the Build
- in line Select Programmer press the button Browse and specify the path to the unzipped files \ Z90a40_unlock_7M \ the img \ prog_emmc_firehose_8936.mbn
- click on the button Load XML and select the first rawprogram0.xml and then patch0.xml
http://lenovo-forums.ru/uploads/mont...046c561c4a.png
6. Run Reboot_QDLoader.bat::
http://lenovo-forums.ru/uploads/mont...73461cc42e.png
7. In the main program window to see that the device is switched to the mode Qualcomm HS-USB QDLoader 9008 .
http://lenovo-forums.ru/uploads/mont...480a6df072.png
8.Start the process of firmware bootloader unlocked by pressing the button Download .
(If you have not defined QFIL utility device Qualcomm HS-USB QDLoader 9008 mode, then you should check through the Device Manager on your PC - there are no problems with Qualcomm driver)
9. At the end of the process unlocked bootloader firmware to the device you will see a sign in the window Status QFIL program the following lines:
Download Succeed
the Finish Download
http://lenovo-forums.ru/uploads/mont...b724004305.png
10.Turning off the device from the USB-cable and clamp button Power to turn on the device (sometimes takes up to 10-20 seconds).
11. Open the main settings menu, the device and go to the " About phone -> Device Information " and press 7 times to select " Build number " until the display shows that you have become a developer.
12. Go back to the device's main Settings menu and go to the " For Developers " in " Factory Unlock " switch the toggle switch in the ON state .
13.Turn off the device (Z90a40), we press both volume buttons and connects to a PC via a USB-cable (the device enters the mode fastboot ), then run Unlock_Bootloader.bat
You should see the value of true if the secondary Bootloader check the status in the string the Device unlocked :
(Bootloader) Device tampered: false
(Bootloader) Device unlocked: true
(Bootloader) Charger screen enabled: false
(Bootloader) Display panel: A
OKAY [0.046s]
finished. total time: 0.046s
http://lenovo-forums.ru/uploads/mont...f936037988.png
14.So all of this unlocking process is completed successfully .
files need links :
http://lenovo-forums.ru/applications...t.php?id=56368
2nd: to do ( install TWRP 3.0.2.0 for Lenovo Vibe Shot )
Extract the folder TWRP archive TWRP-3.0.2.0_Z90a40_by_SevenMaxs.7z to the root of any drive
Turn off the device ( Z90a40 ), we press both volume buttons and connects to a PC via a USB-cable; the device will go into fastboot mode (on the PC must be set for the driver ADB).
Connect your phone to a PC via usb-cable, and run the Flash-TWRP.bat ( the Run-TWRP.bat for a single run TWRP.)
We are waiting for the phone to boot into TWRP
You can now disconnect the usb-cord
Installation is finished!
links : http://lenovo-forums.ru/applications...t.php?id=56391
Login or TWRP:
On the device is turned off hold down both volume buttons and the inclusion of produce, release the power button immediately once the device is turned on and the volume buttons once away; boot logo TWRP.
3rd : install su from twrp
su.zip link: https://drive.google.com/file/d/0BxQ_dY80FUzYUXN6QThDd3pSWWc/view?usp=drivesdk
done

Missing links
Thanks for instructions, but your links are not correctly linked. If you could please fix it.

https://drive.google.com/file/d/0BxQ_dY80FUzYUXN6QThDd3pSWWc/view?usp=drivesdk

Thank you. Could you also fix rest of the links?
lenovo-forums.ru/uploads/mont...046c561c4a.png
lenovo-forums.ru/uploads/mont...73461cc42e.png
lenovo-forums.ru/uploads/mont...480a6df072.png
lenovo-forums.ru/uploads/mont...b724004305.png
lenovo-forums.ru/uploads/mont...f936037988.png
lenovo-forums.ru/applications...t.php?id=56368
lenovo-forums.ru/applications...t.php?id=56391

http://lenovo-forums.ru/topic/18149-lenovo-vibe-shot-разблокировка-bootloader/
http://lenovo-forums.ru/topic/18150-lenovo-vibe-shot-расширенное-рекавери-twrp-by-sevenmaxs/

CloudPad C701TV+/ 701TV+ (+VT107C) Firmware (Dedoxed Edition with Xperia MOD) (Not Final)

Hello, it's @ruzukato02dev-desu! Here's the firmware dedoxed edition mod of CloudPad C701TV+ Tablet Firmware
CLOUDPAD C701TV+ WITH DEDOXED EDITION (SONY XPERIA MOD)
*Removed such as
Google Maps
Google+ (Now Currents)
Hangouts
Search Bar
Google Street view
*Boot animation from Sony Xperia
*Sony Xperia ringtones inserted with/ tap sounds effect
*just 200+mb lesser the system apps (dedoxed)
*added google launcher and google keyboard
Video:
Download Link: https://mega.nz/file/OHA3kQrR#ccYx4zMEFLiIPlPIb4b0G1fB_tFBTp4m06JKlRbF6Cc
Requirements (Only One):
SP Flash Tool
Miracle Tool
Note: it is custom rom and non-rooted, but no need to flash like custom recovery, use only miracle tool and SP flash tool
Do with your own risk, I am not responsible damage your device.
== For Miracle Tool (or miracle tool cracked): ==
1.) Open your application
2.) Go to MTK > Service > Write
3.) Select 8TH Boot on the MTK Chipest on your tablet
4.) Click the file icon, select the scatter file (that you extracted)
5.) Press start
6.) On your tablet, press volume down and plug USB together
7.) When detected, flash all on your system firmware on popup
8.) Wait until finish, and done!
Note: If the tablet stuck on boot in 3 minutes, restart using hold power and volume down key, then turn on again.
Enjoy!
== For SP Flash tool users ==
For SP Flash tool users,
Before flashing the custom rom, please don't format the whole system on your tablet, it will erases the wi-fi mac address (nvram) and IMEI #
Please do only "download mode"
1.) Open the application
2.) Click the "scatter-loading file", select the scatter file (that you extracted)
3.) Flash all the firmware
4.) Press download icon
5.) On your tablet, press volume down and plug USB together
6.) Wait until finish, and done!
Note: If the tablet stuck on boot in 3 minutes, restart using hold power and volume down key, then turn on again.
Enjoy!
That's all
Please subscribe YT Channels:
https://www.youtube.com/channel/UCyA7PJWqz_z9dzK7-mmGA2w
https://www.youtube.com/channel/UCGSJr_Xo0mDVg7iBwZNNZeQ

Good day sir, i cant proceed to download mode. my cable is working even detected as a usb device on my pc , but i cannot flash this device after pressing the down button. what should i do?

Question [Guide] How to use SP Flash tool [Windows Only!]

Today I'm going to write how to use so flash tool for OnePlus Nord CE 2
Before you begin download: https://drive.google.com/file/d/1fL8qqu_pBK1YU5xbgugLax7ZKU-k3ex7/view?usp=drivesdk
This includes sp flash tool for our MTK version, drivers and MTK Bypass files!
Requirements: PC or Laptop
Internet connection
USB cable
Take a backup of your data, Just in case if any error happens.
Windows Method
Requirements:
SP_Flash_Tool_5.2112.00.zip
drive.google.com
Decrypted OFP for our device! You can find it on Google!
Install Python from Windows Store
https://sourceforge.net/projects/li...ibusb-win32-devel-filter-1.2.6.0.exe/download
libusb-win32 - Having Issues? Click Here
Steps:
1) Extract the zip
2) Use the bundled QcomMtk_Driver_Setup_3.1.9.exe from the zip. for MTK Preloader USB VCOM driver it should be installed within windows 8 and above?
3)Download this file and install it, after installing power off phone and connect to pc while holding Vol+- (don't leave the buttons after connecting) . You might need this driver as well if it's not detected.
Press next, connect your device to PC while holding Vol+- buttons (your device needs to be powered off, and don't leave the buttons) and you will see the mtkdriver down below. Install it.
Choose MediaTek USB Port and install it.
4)Then run the brom.bat under Bypass folder (spflashtool/mtk-bypass/bypass). (for Linux, When available) use command: python3 mtk payload to start the BROM exploit!
5) Now power off the phone and connect the phone while holding volume + and - (Don't leave the buttons until the bypass is done)
6)After the above step Go into Flash Tool folder and open the SPFlash tool and launch flash_tool.exe
7) Click on Options>Options and go to Connections and select UART and set Baud Rate to 921600
8)Now in Sp flash tool select the scatter file which you have extracted from Partitions.zip and make sure that prealoder, lk, and lk2 is selected.
9) You don't need to select auth file as authorization is disabled. Once you do it, it should look like this. ALWAYS MAKE SURE DOWNLOAD ONLY MODE IS SELECTED! DON'T SELECT OTHER MODES!
Make SURE "Download Only" is selected. Don't select ANYTHING ELSE! You will lose your IMEIs, Serial Numbers, Capability of Hardware Attestation etc. if you choose "Format data + Download" make SURE you selected "Download Only".
10) Now, you can start downloading with the button and after that a checkmark will appear. You can reboot your phone
After flashing it should look like this. Download has been complete.
Credits:
B. Kerler for MTK Bypass
@Saksham Antil (aka Tony Stark) for original guide

Reserved for updates:
When Linux Version will be available for our devices it will be posted
Edit it looks like it is, only my who uses old source