SP Flash Tool GuideFeatures:
Revives your phone from almost any brick!
Fixes the WiFi and Bluetooth (only software problem), created due to some wrong permissions.
Flash CWM Recovery
Flash Custom ROMs
Root your device without a root exploit.
Requirements (click on softwares below to download):
SP Flash Tool
Micromax Canvas 4/HD Drivers (NEW!) (Windows 8.1/8/7/Vista 64-bit) [NEED TO DISABLE DRIVER SIGNATURE ENFORCEMENT] ||| Others (for 32bit Windows)
Micromax Canvas
Micro USB Cable
Windows PC/Laptop
Procedure (for flashing Firmwares):
Download all (software) requirements to a folder
Download the files/folder to be flashed to a folder ( Here is the Stock ROM for Canvas 4: Mod Edit...PPC Click Removed )
Extract it to a folder (this is the extracted firmware for this guide)
Install drivers & extract SP Flash Tool to a folder
Open Flash_tool.exe
Click Scatter-loading
Select MT6589_Android_scatter_emmc.txt (for Canvas 4) found in extracted firmware
Click Download button or press F9
Shutdown your Canvas 4 and connect it with Micro USB to PC running the Flash Tool
See it flashing before your eyes and wait for a green circle to show up on your PC to indicate successful flashing.
Restart phone and Done!
To be added:
Screenshots.
RESERVEd
If you are facing the same or similar problems as this:
ManoharMaddineni said:
I'm currently on MIUI, I want to switch back to the sock rom of Canvas 4.
I tried following the tutorials
here : http://kalyani-786.blogspot.com/2013...n-one-rom.html
and here : http://forum.xda-developers.com/show....php?t=2466694
but I had the same issue both times.
When I connect the phone (switched off) it connects (I can hear the sound) and then disconnects (again the sound) and starts charging.
I used the PdaNet+ drivers, the drivers of canvas hd (a116), and many others (Names of all the drivers further below the thread)
I tried using a different cable,removing the battery, different USB ports, multiple PC's, and 64bit versions of Windows 7, and windows 8/8.1, still, had the same issue..
Can someone tell me what I'm doing wrong?
What I did :
Open the SP flash tool (with admin permissions)
Load the scatter file
Check the box that says 'DA DL All With Check Sum'
Hit download
Connect the phone (switched off)
Now the issue starts, it connects, then disconnects, and starts charging.
The flash tool, it just keeps on searching for my phone.
Other Drivers I tried :
Micromax A116&A240 Drivers (from XDA)
a116_driver (from Micromax India download section)
AdbDriverInstaller (from XDA)
MTK6589_PdaNET_ADB_VCOM_Drivers (from the first tutorial link above)
PDAnet_4150 (from PDA website)
PdaNetA4126 (from PDA website)
MyPhoneExplorer_Setup_1.8.5 (someone referred)
Click to expand...
Click to collapse
Then this is definitely a driver problem...
If you tried multiple drivers then post your OS and problem here and help will be there at your rescue...
this will work for other unbranded device?
Yash98 said:
SP Flash Tool GuideFeatures:
Revives your phone from almost any brick!
Fixes the WiFi and Bluetooth (only software problem), created due to some wrong permissions.
Flash CWM Recovery
Flash Custom ROMs
Root your device without a root exploit.
Requirements (click on softwares below to download):
SP Flash Tool
Micromax Canvas 4/HD Drivers
Micromax Canvas
Micro USB Cable
Windows PC/Laptop
Procedure (for flashing Firmwares):
Download all (software) requirements to a folder
Download the files/folder to be flashed to a folder ( Here is the Stock ROM for Canvas 4: http://www.tusfiles.net/agbdwr69sc8s )
Extract it to a folder (this is the extracted firmware for this guide)
Install drivers & extract SP Flash Tool to a folder
Open Flash_tool.exe
Click Scatter-loading
Select MT6589_Android_scatter_emmc.txt (for Canvas 4) found in extracted firmware
Click Download button or press F9
Shutdown your Canvas 4 and connect it with Micro USB to PC running the Flash Tool
See it flashing before your eyes and wait for a green circle to show up on your PC to indicate successful flashing.
Restart phone and Done!
To be added:
Screenshots.
Click to expand...
Click to collapse
I'm currently on MIUI, I want to switch back to the sock rom of Canvas 4.
I tried following the tutorials
here : http://kalyani-786.blogspot.com/2013/12/micromax-canvas-4-a210-all-in-one-rom.html
and here : http://forum.xda-developers.com/showthread.php?t=2466694
but I had the same issue both times.
When I connect the phone (switched off) it connects (I can hear the sound) and then disconnects (again the sound) and starts charging.
I used the PdaNet+ drivers, the drivers of canvas hd (a116), and many others (Names of all the drivers further below the thread)
I tried using a different cable,removing the battery, different USB ports, multiple PC's, and 64bit versions of Windows 7, and windows 8/8.1, still, had the same issue..
Can someone tell me what I'm doing wrong?
What I did :
Open the SP flash tool (with admin permissions)
Load the scatter file
Check the box that says 'DA DL All With Check Sum'
Hit download
Connect the phone (switched off)
Now the issue starts, it connects, then disconnects, and starts charging.
The flash tool, it just keeps on searching for my phone.
Other Drivers I tried :
Micromax A116&A240 Drivers (from XDA)
a116_driver (from Micromax India download section)
AdbDriverInstaller (from XDA)
MTK6589_PdaNET_ADB_VCOM_Drivers (from the first tutorial link above)
PDAnet_4150 (from PDA website)
PdaNetA4126 (from PDA website)
MyPhoneExplorer_Setup_1.8.5 (someone referred)
ManoharMaddineni said:
I'm currently on MIUI, I want to switch back to the sock rom of Canvas 4.
I tried following the tutorials
here : http://kalyani-786.blogspot.com/2013/12/micromax-canvas-4-a210-all-in-one-rom.html
and here : http://forum.xda-developers.com/showthread.php?t=2466694
but I had the same issue both times.
When I connect the phone (switched off) it connects (I can hear the sound) and then disconnects (again the sound) and starts charging.
I used the PdaNet+ drivers, the drivers of canvas hd (a116), and many others (Names of all the drivers further below the thread)
I tried using a different cable,removing the battery, different USB ports, multiple PC's, and 64bit versions of Windows 7, and windows 8/8.1, still, had the same issue..
Can someone tell me what I'm doing wrong?
What I did :
Open the SP flash tool (with admin permissions)
Load the scatter file
Check the box that says 'DA DL All With Check Sum'
Hit download
Connect the phone (switched off)
Now the issue starts, it connects, then disconnects, and starts charging.
The flash tool, it just keeps on searching for my phone.
Other Drivers I tried :
Micromax A116&A240 Drivers (from XDA)
a116_driver (from Micromax India download section)
AdbDriverInstaller (from XDA)
MTK6589_PdaNET_ADB_VCOM_Drivers (from the first tutorial link above)
PDAnet_4150 (from PDA website)
PdaNetA4126 (from PDA website)
MyPhoneExplorer_Setup_1.8.5 (someone referred)
Click to expand...
Click to collapse
Here this is the answer to everything: http://www.tusfiles.net/7z4wk4m92et5
++++
Also this: http://forum.xda-developers.com/showthread.php?t=2180436
badagila said:
this will work for other unbranded device?
Click to expand...
Click to collapse
Yep for every goddamn MTK device this is.
Yash98 said:
Yep for every goddamn MTK device this is.
Click to expand...
Click to collapse
what about on 3t technology tab? are familiar with it?
Yash98 said:
Here this is the answer to everything: http://www.tusfiles.net/7z4wk4m92et5
++++
Also this: http://forum.xda-developers.com/showthread.php?t=2180436
Click to expand...
Click to collapse
My phone just keeps disconnecting and re connecting to the PC when I try to connect it with the battery, sim, and sd card taken out. (also holding the vol+ button)
Also, can you upload the file to mediafire? TrustFiles has a lot of **** between the file and the user...
CHECK OUT THE NEW WIN 8.1/8/7 64 bit DRIVERS DIRECT BACKUP FROM A WORKING WIN8.1 64BIT INSTALL
BUT MAKE SURE TO: Disable Driver Signature Enforcement (google it exactly like this for instructions)
NOTE: This may show an attention mark in Device Manager. Completely ignore that!
Yash98 said:
If you are facing the same or similar problems as this:
Then this is definitely a driver problem...
If you tried multiple drivers then post your OS and problem here and help will be there at your rescue...
Click to expand...
Click to collapse
I tried this on windows 7, and windows 8.
ManoharMaddineni said:
I tried this on windows 7, and windows 8.
Click to expand...
Click to collapse
Try this driver, now this driver comes from a backup from my Windows 8.1 Pro 64Bit install and should work on your Win8 64bit too,
though you HAVE to disable Driver Signature Enforcement (google it) or else it won't install..
https://mega.co.nz/#!AQwnVapB!ZaC53xZxSoG8dwRqLZFKguXvJJVuEshc4JPtz5yZYGs
can u say a flash tool for micromax a111?? is this flash tool can be used for micromax a111 doodle which is of same msm8225q chipset number ??
Yash98 said:
If you are facing the same or similar problems as this:
Then this is definitely a driver problem...
If you tried multiple drivers then post your OS and problem here and help will be there at your rescue...
Click to expand...
Click to collapse
Tried the new drivers, not working either. my phone just keeps charging. the flashing process does not start what so ever,,,
hi yash98
I have two phone
one is soft bricked and one is working
there is no ROM available anywhere for this phone
is it possible to extract the rom from the working phone and use it to flash to the bricked phone?
any tutorial on how to do this?
thank you
Urgent help required
Yash98 said:
SP Flash Tool GuideFeatures:
Revives your phone from almost any brick!
Fixes the WiFi and Bluetooth (only software problem), created due to some wrong permissions.
Flash CWM Recovery
Flash Custom ROMs
Root your device without a root exploit.
Requirements (click on softwares below to download):
SP Flash Tool
Micromax Canvas 4/HD Drivers (NEW!) (Windows 8.1/8/7/Vista 64-bit) [NEED TO DISABLE DRIVER SIGNATURE ENFORCEMENT] ||| Others (for 32bit Windows)
Micromax Canvas
Micro USB Cable
Windows PC/Laptop
Procedure (for flashing Firmwares):
Download all (software) requirements to a folder
Download the files/folder to be flashed to a folder ( Here is the Stock ROM for Canvas 4: Mod Edit...PPC Click Removed )
Extract it to a folder (this is the extracted firmware for this guide)
Install drivers & extract SP Flash Tool to a folder
Open Flash_tool.exe
Click Scatter-loading
Select MT6589_Android_scatter_emmc.txt (for Canvas 4) found in extracted firmware
Click Download button or press F9
Shutdown your Canvas 4 and connect it with Micro USB to PC running the Flash Tool
See it flashing before your eyes and wait for a green circle to show up on your PC to indicate successful flashing.
Restart phone and Done!
To be added:
Screenshots.
Click to expand...
Click to collapse
have canvas 4 a210 problem with imei ( at command send fail) which occurred at changing rom, some on adviced sp flash
but cant use pc since there was charging hardware problem hence usb port cant be used hardware problem ( charging via external battery charging taken out) . need SP tool from sd card if available
thanks
@jjwaiting4u Currently impossible only through Micro USB port possiblity
help needed
yash got my phone repaired
there was no problem except rain water that had shorted, cleaning the components helped
well
downloaded sptool from another place (your having problem) ,mt 6589 scatter files, recover.imp
connected : usb in off mode... loaded scatter and recover file.......... clicked down load .................nothing
there is something i am not doing right....( PLease note only recovery and boot is with path others dont have any)
thanks for help rendered
jj
big mess
Yash98 said:
SP Flash Tool GuideFeatures:
Revives your phone from almost any brick!
Fixes the WiFi and Bluetooth (only software problem), created due to some wrong permissions.
Flash CWM Recovery
Flash Custom ROMs
Root your device without a root exploit.
Requirements (click on softwares below to download):
SP Flash Tool
Micromax Canvas 4/HD Drivers (NEW!) (Windows 8.1/8/7/Vista 64-bit) [NEED TO DISABLE DRIVER SIGNATURE ENFORCEMENT] ||| Others (for 32bit Windows)
Micromax Canvas
Micro USB Cable
Windows PC/Laptop
Procedure (for flashing Firmwares):
Download all (software) requirements to a folder
Download the files/folder to be flashed to a folder ( Here is the Stock ROM for Canvas 4: Mod Edit...PPC Click Removed )
Extract it to a folder (this is the extracted firmware for this guide)
Install drivers & extract SP Flash Tool to a folder
Open Flash_tool.exe
Click Scatter-loading
Select MT6589_Android_scatter_emmc.txt (for Canvas 4) found in extracted firmware
Click Download button or press F9
Shutdown your Canvas 4 and connect it with Micro USB to PC running the Flash Tool
See it flashing before your eyes and wait for a green circle to show up on your PC to indicate successful flashing.
Restart phone and Done!
To be added:
Screenshots.
Click to expand...
Click to collapse
Hi yash bhai
things are going from bad to worst but i am not giving up.....so need U
as per your post even can can unbrick canvas4 ....
while using sp too; i used format ( to factory format)
now nothing happens ( pressing down Vol +/_ and power ) cant go into recovery
please help.....
will be great full ( have canvas 4 stock rom downloaded)........?
Driver problem solved
I had the same problem, phone connecting then disconnecting.
Here is a solution for the problem.
1. Install latest drivers
2. Disconnect phone
3. Open SP Flash Tool
4. Select Scatter-loading and select the files required
4. Now here is the trick, in SP Flash Tool, go to ACTION > DOWNLOAD
5. Connect the phone (which should be switched off)
Hi everyone.
I got a Lenovo A850 ( MTK 6582 ) here which is belong to my friend, it was full with malware apps or I can say a Trojan, Hijackers etc etc.. Because it like to turn off USB DEBUGGING option ( checkbox ) and downloading inappropriate apps into device and I decide to flash a new ROM I downloaded from needrom website and flashed using SP Tools. All processes went alright and SP tools 'Green Circle' popup. :good:
Then, I unplug USB and put battery and cover, and pressing Power button. Sadly, it won't turn ON anymore, just Red LED light.:crying::crying: I can't even enter recovery / bootloader. I was looking for solutions everywhere including in X-DA forum. Some said, It was Hardware problem, but how come? It was fine before I flashed a ROM. and now it's totally dead
I played around by pulling out a battery and pressing Volume buttons + power with USB cable attached to it and it finally respond to PC device manager by showing a MTK USB port I tried using SP tools again to flash another ROM with hopes it will fix but yeah, I know it won't work as MTK USB Port is not the right driver for SP tools. :silly:
What do i do now? Please someone help me.
Many thanks!
EDIT : PROBLEM SOLVED
Hello members,
Finally, I got this device alive again and if you are also having this issue and still can't fix it, you can now by following below steps;
Its time to revive your dead phone.
First, download below files:
- Download this A850 stock ROM here ( MTK6582 )
- Use this SP flash tool, here
- VCOM Mediatek Drivers pack ( required )
*Items required : USB cable, PC/Laptop, & Your dead phone.
OK now lets start...
2. Unzip ROM file and start SP flash tools, Load scatter file > Go to option > check DA DL all with checksum.
3. Uncheck all list and Select 'PRELOADER' only and press Download.
4. Remove battery from your phone, after 5 secs while pressing Vol + / Vol - or both, connect USB to you device. If you get no response from PC ( not recognize ), you have to unscrew and open your phone cover to manually jumper the 'Preloader Test point'. Please follow this guide here. However it's quiet advance step and please do it carefully at your own risk.:good:
5. Otherwise, after plug in USB, your PC will start installing Driver ( If it failed to install driver automatically, then you have to install it manually from VCOM Mediatek driver pack download earlier ).
6. If everything is right, SP flash tools will automatically detect your device via MTK USB port ( RED BAR PROGRESS ) and It will change it to Mediatek DA VCOM and PURPLE BAR PROGRESS show up and viola! GREEN CIRCLE popup!
DONE!
7. Now remove USB from your phone, Don't do anything yet, back to SP flash tools, and now Select all flash list except PRELOADER and press Download. and insert USB cable again and flash tools will start the process, wait until it finish flashing all img's ( Boot, Uboot, System, Data, MBR etc ).
If flashing processes done successfully, it will popup GREEN CIRCLE again, now you can take a deep breath :victory:
- Unplug USB > Put Battery ON > Press power button > You tell me what you feel :silly:
*Side Note : If you're having any issue like a boot loop, just boot into Recovery Mode and format data/cache and REBOOT.
CWM Recovery img here
*Automade using MTKDroidtools
Good Luck! :highfive::highfive:
RidzVarn said:
Hi everyone.
I got a Lenovo A850 ( MTK 6582 ) here which is belong to my friend, it was full with malware apps or I can say a Trojan, Hijackers etc etc.. Because it like to turn off USB DEBUGGING option ( checkbox ) and downloading inappropriate apps into device and I decide to flash a new ROM I downloaded from needrom website and flashed using SP Tools. All processes went alright and SP tools 'Green Circle' popup. :good:
Then, I unplug USB and put battery and cover, and pressing Power button. Sadly, it won't turn ON anymore, just Red LED light.:crying::crying: I can't even enter recovery / bootloader. I was looking for solutions everywhere including in X-DA forum. Some said, It was Hardware problem, but how come? It was fine before I flashed a ROM. and now it's totally dead
I played around by pulling out a battery and pressing Volume buttons + power with USB cable attached to it and it finally respond to PC device manager by showing a MTK USB port I tried using SP tools again to flash another ROM with hopes it will fix but yeah, I know it won't work as MTK USB Port is not the right driver for SP tools. :silly:
What do i do now? Please someone help me.
Many thanks!
EDIT : PROBLEM SOLVED
Hello members,
Finally, I got this device alive again and if you are also having this issue and still can't fix it, you can now by following below steps;
Its time to revive your dead phone.
First, download below files:
- Download this A850 stock ROM here ( MTK6582 )
- Use this SP flash tool, here
- VCOM Mediatek Drivers pack ( required )
*Items required : USB cable, PC/Laptop, & Your dead phone.
OK now lets start...
2. Unzip ROM file and start SP flash tools, Load scatter file > Go to option > check DA DL all with checksum.
3. Uncheck all list and Select 'PRELOADER' only and press Download.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Remove battery from your phone, after 5 secs while pressing Vol + / Vol - or both, connect USB to you device. If you get no response from PC ( not recognize ), you have to unscrew and open your phone cover to manually jumper the 'Preloader Test point'. Please follow this guide here. However it's quiet advance step and please do it carefully at your own risk.:good:
5. Otherwise, after plug in USB, your PC will start installing Driver ( If it failed to install driver automatically, then you have to install it manually from VCOM Mediatek driver pack download earlier ).
6. If everything is right, SP flash tools will automatically detect your device via MTK USB port ( RED BAR PROGRESS ) and It will change it to Mediatek DA VCOM and PURPLE BAR PROGRESS show up and viola! GREEN CIRCLE popup!
DONE!
7. Now remove USB from your phone, Don't do anything yet, back to SP flash tools, and now Select all flash list except PRELOADER and press Download. and insert USB cable again and flash tools will start the process, wait until it finish flashing all img's ( Boot, Uboot, System, Data, MBR etc ).
If flashing processes done successfully, it will popup GREEN CIRCLE again, now you can take a deep breath :victory:
- Unplug USB > Put Battery ON > Press power button > You tell me what you feel :silly:
*Side Note : If you're having any issue like a boot loop, just boot into Recovery Mode and format data/cache and REBOOT.
CWM Recovery img here
*Automade using MTKDroidtools
Good Luck! :highfive::highfive:
Click to expand...
Click to collapse
Hi there, first to all, thanks for this information, im in the process of recover of my A850i after intall A850_S121 rom, the phone was bricked :S , im right know following your steps and in the FlashTool , when i select only the preloader and click download , FlashTool show a box that says "PMT changed for the ROM, it must be downloaded" , then i click help and ask me to do a " Format All + Download" , what should i do? Please Help! And i have another question in the dropdown menu wich option should be set ? download only ? , firmware upgrade? , format all + download? Thanks!!
bamatos said:
Hi there, first to all, thanks for this information, im in the process of recover of my A850i after intall A850_S121 rom, the phone was bricked :S , im right know following your steps and in the FlashTool , when i select only the preloader and click download , FlashTool show a box that says "PMT changed for the ROM, it must be downloaded" , then i click help and ask me to do a " Format All + Download" , what should i do? Please Help! And i have another question in the dropdown menu wich option should be set ? download only ? , firmware upgrade? , format all + download? Thanks!!
Click to expand...
Click to collapse
Hi there,
Try again using different version of SP tools. Hope it will fix. I got that error msg too before when using new SP flash tools.
Good luck![emoji1]
Sent from my 4027N using Tapatalk
Great share! Thanks for helping my exact problem as you are.
Thanks alot :highfive:
RidzVarn said:
Hi everyone.
I got a Lenovo A850 ( MTK 6582 ) here which is belong to my friend, it was full with malware apps or I can say a Trojan, Hijackers etc etc.. Because it like to turn off USB DEBUGGING option ( checkbox ) and downloading inappropriate apps into device and I decide to flash a new ROM I downloaded from needrom website and flashed using SP Tools. All processes went alright and SP tools 'Green Circle' popup. :good:
Then, I unplug USB and put battery and cover, and pressing Power button. Sadly, it won't turn ON anymore, just Red LED light.:crying::crying: I can't even enter recovery / bootloader. I was looking for solutions everywhere including in X-DA forum. Some said, It was Hardware problem, but how come? It was fine before I flashed a ROM. and now it's totally dead
I played around by pulling out a battery and pressing Volume buttons + power with USB cable attached to it and it finally respond to PC device manager by showing a MTK USB port I tried using SP tools again to flash another ROM with hopes it will fix but yeah, I know it won't work as MTK USB Port is not the right driver for SP tools. :silly:
What do i do now? Please someone help me.
Many thanks!
EDIT : PROBLEM SOLVED
Hello members,
Finally, I got this device alive again and if you are also having this issue and still can't fix it, you can now by following below steps;
Its time to revive your dead phone.
First, download below files:
- Download this A850 stock ROM here ( MTK6582 )
- Use this SP flash tool, here
- VCOM Mediatek Drivers pack ( required )
*Items required : USB cable, PC/Laptop, & Your dead phone.
OK now lets start...
2. Unzip ROM file and start SP flash tools, Load scatter file > Go to option > check DA DL all with checksum.
3. Uncheck all list and Select 'PRELOADER' only and press Download.
4. Remove battery from your phone, after 5 secs while pressing Vol + / Vol - or both, connect USB to you device. If you get no response from PC ( not recognize ), you have to unscrew and open your phone cover to manually jumper the 'Preloader Test point'. Please follow this guide here. However it's quiet advance step and please do it carefully at your own risk.:good:
5. Otherwise, after plug in USB, your PC will start installing Driver ( If it failed to install driver automatically, then you have to install it manually from VCOM Mediatek driver pack download earlier ).
6. If everything is right, SP flash tools will automatically detect your device via MTK USB port ( RED BAR PROGRESS ) and It will change it to Mediatek DA VCOM and PURPLE BAR PROGRESS show up and viola! GREEN CIRCLE popup!
DONE!
7. Now remove USB from your phone, Don't do anything yet, back to SP flash tools, and now Select all flash list except PRELOADER and press Download. and insert USB cable again and flash tools will start the process, wait until it finish flashing all img's ( Boot, Uboot, System, Data, MBR etc ).
If flashing processes done successfully, it will popup GREEN CIRCLE again, now you can take a deep breath :victory:
- Unplug USB > Put Battery ON > Press power button > You tell me what you feel :silly:
*Side Note : If you're having any issue like a boot loop, just boot into Recovery Mode and format data/cache and REBOOT.
CWM Recovery img here
*Automade using MTKDroidtools
Good Luck! :highfive::highfive:
Click to expand...
Click to collapse
Bro, boleh share backup x? Aku punya phone bricked, dah try rom official yang ada tapi x boleh.. nak try guna backup rom plak
Bro, boleh share backup x? Aku punya phone bricked, dah try rom official yang ada tapi x boleh.. nak try guna backup rom plak
Click to expand...
Click to collapse
Hi,
Sorry lama tak jenguk, backup pun dah tak ada dah. Dah tukar phone.
Bro..aq haritu format gune sp flashtool..kirenye macam nak format dulu baru download rom baru la..tapi lepas format tros mati fon nie..xleh turn on..yang ade cume lampu merah tu je..nak connect pc pon xleh..camane nak selesai mende ni bro??
Dead Lenovo s850 ....while trying some cn version rom
help me to get back my phone plz...as i was trying to install linerage os cn 13 i bricked my phone......n its not even power up.
kindly plz helpme to unbrick .
i download the stock rom n try to flash it through flash tool. but my windows cant recognize my device.....
so i install the driver .....vcom n cdc manually but still cant recognize it .
:good:
RidzVarn said:
Hi everyone.
I got a Lenovo A850 ( MTK 6582 ) here which is belong to my friend, it was full with malware apps or I can say a Trojan, Hijackers etc etc.. Because it like to turn off USB DEBUGGING option ( checkbox ) and downloading inappropriate apps into device and I decide to flash a new ROM I downloaded from needrom website and flashed using SP Tools. All processes went alright and SP tools 'Green Circle' popup. :good:
Then, I unplug USB and put battery and cover, and pressing Power button. Sadly, it won't turn ON anymore, just Red LED light.:crying::crying: I can't even enter recovery / bootloader. I was looking for solutions everywhere including in X-DA forum. Some said, It was Hardware problem, but how come? It was fine before I flashed a ROM. and now it's totally dead
I played around by pulling out a battery and pressing Volume buttons + power with USB cable attached to it and it finally respond to PC device manager by showing a MTK USB port I tried using SP tools again to flash another ROM with hopes it will fix but yeah, I know it won't work as MTK USB Port is not the right driver for SP tools. :silly:
What do i do now? Please someone help me.
Many thanks!
EDIT : PROBLEM SOLVED
Hello members,
Finally, I got this device alive again and if you are also having this issue and still can't fix it, you can now by following below steps;
Its time to revive your dead phone.
First, download below files:
- Download this A850 stock ROM here ( MTK6582 )
- Use this SP flash tool, here
- VCOM Mediatek Drivers pack ( required )
*Items required : USB cable, PC/Laptop, & Your dead phone.
OK now lets start...
2. Unzip ROM file and start SP flash tools, Load scatter file > Go to option > check DA DL all with checksum.
3. Uncheck all list and Select 'PRELOADER' only and press Download.
4. Remove battery from your phone, after 5 secs while pressing Vol + / Vol - or both, connect USB to you device. If you get no response from PC ( not recognize ), you have to unscrew and open your phone cover to manually jumper the 'Preloader Test point'. Please follow this guide here. However it's quiet advance step and please do it carefully at your own risk.:good:
5. Otherwise, after plug in USB, your PC will start installing Driver ( If it failed to install driver automatically, then you have to install it manually from VCOM Mediatek driver pack download earlier ).
6. If everything is right, SP flash tools will automatically detect your device via MTK USB port ( RED BAR PROGRESS ) and It will change it to Mediatek DA VCOM and PURPLE BAR PROGRESS show up and viola! GREEN CIRCLE popup!
DONE!
7. Now remove USB from your phone, Don't do anything yet, back to SP flash tools, and now Select all flash list except PRELOADER and press Download. and insert USB cable again and flash tools will start the process, wait until it finish flashing all img's ( Boot, Uboot, System, Data, MBR etc ).
If flashing processes done successfully, it will popup GREEN CIRCLE again, now you can take a deep breath :victory:
- Unplug USB > Put Battery ON > Press power button > You tell me what you feel :silly:
*Side Note : If you're having any issue like a boot loop, just boot into Recovery Mode and format data/cache and REBOOT.
CWM Recovery img here
*Automade using MTKDroidtools
Good Luck! :highfive::highfive:
Click to expand...
Click to collapse
Hi guys! I never knew that this would happened. So I just got my phone turned to something like this. i) The link above is not working. Do you guys have any spare links? ii) I tried as he said above, and I'm using this app that I found on YouTube, and I got DRAM error. I hope you guys could help me, I feel so bad towards myself. Thanks in advanced!
saladbass123 said:
Hi guys! I never knew that this would happened. So I just got my phone turned to something like this. i) The link above is not working. Do you guys have any spare links? ii) I tried as he said above, and I'm using this app that I found on YouTube, and I got DRAM error. I hope you guys could help me, I feel so bad towards myself. Thanks in advanced!
Click to expand...
Click to collapse
Hi saladbass,
DRAM error usually because of ROM isnt correct or in other words, it is not for your device. Try to find the correct ROM for your model.
try find here and let me know.
https://firmwarefile.com/lenovo-a850
good luck!:fingers-crossed:
RidzVarn said:
Hi everyone.
I got a Lenovo A850 ( MTK 6582 ) here which is belong to my friend, it was full with malware apps or I can say a Trojan, Hijackers etc etc.. Because it like to turn off USB DEBUGGING option ( checkbox ) and downloading inappropriate apps into device and I decide to flash a new ROM I downloaded from needrom website and flashed using SP Tools. All processes went alright and SP tools 'Green Circle' popup. :good:
Then, I unplug USB and put battery and cover, and pressing Power button. Sadly, it won't turn ON anymore, just Red LED light.:crying::crying: I can't even enter recovery / bootloader. I was looking for solutions everywhere including in X-DA forum. Some said, It was Hardware problem, but how come? It was fine before I flashed a ROM. and now it's totally dead
I played around by pulling out a battery and pressing Volume buttons + power with USB cable attached to it and it finally respond to PC device manager by showing a MTK USB port I tried using SP tools again to flash another ROM with hopes it will fix but yeah, I know it won't work as MTK USB Port is not the right driver for SP tools. :silly:
What do i do now? Please someone help me.
Many thanks!
EDIT : PROBLEM SOLVED
Hello members,
Finally, I got this device alive again and if you are also having this issue and still can't fix it, you can now by following below steps;
Its time to revive your dead phone.
First, download below files:
- Download this A850 stock ROM here ( MTK6582 )
- Use this SP flash tool, here
- VCOM Mediatek Drivers pack ( required )
*Items required : USB cable, PC/Laptop, & Your dead phone.
OK now lets start...
2. Unzip ROM file and start SP flash tools, Load scatter file > Go to option > check DA DL all with checksum.
3. Uncheck all list and Select 'PRELOADER' only and press Download.
4. Remove battery from your phone, after 5 secs while pressing Vol + / Vol - or both, connect USB to you device. If you get no response from PC ( not recognize ), you have to unscrew and open your phone cover to manually jumper the 'Preloader Test point'. Please follow this guide here. However it's quiet advance step and please do it carefully at your own risk.:good:
5. Otherwise, after plug in USB, your PC will start installing Driver ( If it failed to install driver automatically, then you have to install it manually from VCOM Mediatek driver pack download earlier ).
6. If everything is right, SP flash tools will automatically detect your device via MTK USB port ( RED BAR PROGRESS ) and It will change it to Mediatek DA VCOM and PURPLE BAR PROGRESS show up and viola! GREEN CIRCLE popup!
DONE!
7. Now remove USB from your phone, Don't do anything yet, back to SP flash tools, and now Select all flash list except PRELOADER and press Download. and insert USB cable again and flash tools will start the process, wait until it finish flashing all img's ( Boot, Uboot, System, Data, MBR etc ).
If flashing processes done successfully, it will popup GREEN CIRCLE again, now you can take a deep breath :victory:
- Unplug USB > Put Battery ON > Press power button > You tell me what you feel :silly:
*Side Note : If you're having any issue like a boot loop, just boot into Recovery Mode and format data/cache and REBOOT.
CWM Recovery img here
*Automade using MTKDroidtools
Good Luck! :highfive::highfive:
Click to expand...
Click to collapse
Bro, macam mana nak deal dgn error 4001 yg ckp da tak send respon dkt flash tool?
mfkofc said:
Bro, macam mana nak deal dgn error 4001 yg ckp da tak send respon dkt flash tool?
Click to expand...
Click to collapse
nada bunyi tu mcm SP Tools punya common error tu. Cuba guna wayar USB lain, reinstall MTK driver and guna different version SP tools. Dan 1 lagi .. pastikan ROM yg awk nk flash tu betul dengan model phone.
Gudluck bro :good: