SP Flash Tool GuideFeatures:
Revives your phone from almost any brick!
Fixes the WiFi and Bluetooth (only software problem), created due to some wrong permissions.
Flash CWM Recovery
Flash Custom ROMs
Root your device without a root exploit.
Requirements (click on softwares below to download):
SP Flash Tool
Micromax Canvas 4/HD Drivers (NEW!) (Windows 8.1/8/7/Vista 64-bit) [NEED TO DISABLE DRIVER SIGNATURE ENFORCEMENT] ||| Others (for 32bit Windows)
Micromax Canvas
Micro USB Cable
Windows PC/Laptop
Procedure (for flashing Firmwares):
Download all (software) requirements to a folder
Download the files/folder to be flashed to a folder ( Here is the Stock ROM for Canvas 4: Mod Edit...PPC Click Removed )
Extract it to a folder (this is the extracted firmware for this guide)
Install drivers & extract SP Flash Tool to a folder
Open Flash_tool.exe
Click Scatter-loading
Select MT6589_Android_scatter_emmc.txt (for Canvas 4) found in extracted firmware
Click Download button or press F9
Shutdown your Canvas 4 and connect it with Micro USB to PC running the Flash Tool
See it flashing before your eyes and wait for a green circle to show up on your PC to indicate successful flashing.
Restart phone and Done!
To be added:
Screenshots.
RESERVEd
If you are facing the same or similar problems as this:
ManoharMaddineni said:
I'm currently on MIUI, I want to switch back to the sock rom of Canvas 4.
I tried following the tutorials
here : http://kalyani-786.blogspot.com/2013...n-one-rom.html
and here : http://forum.xda-developers.com/show....php?t=2466694
but I had the same issue both times.
When I connect the phone (switched off) it connects (I can hear the sound) and then disconnects (again the sound) and starts charging.
I used the PdaNet+ drivers, the drivers of canvas hd (a116), and many others (Names of all the drivers further below the thread)
I tried using a different cable,removing the battery, different USB ports, multiple PC's, and 64bit versions of Windows 7, and windows 8/8.1, still, had the same issue..
Can someone tell me what I'm doing wrong?
What I did :
Open the SP flash tool (with admin permissions)
Load the scatter file
Check the box that says 'DA DL All With Check Sum'
Hit download
Connect the phone (switched off)
Now the issue starts, it connects, then disconnects, and starts charging.
The flash tool, it just keeps on searching for my phone.
Other Drivers I tried :
Micromax A116&A240 Drivers (from XDA)
a116_driver (from Micromax India download section)
AdbDriverInstaller (from XDA)
MTK6589_PdaNET_ADB_VCOM_Drivers (from the first tutorial link above)
PDAnet_4150 (from PDA website)
PdaNetA4126 (from PDA website)
MyPhoneExplorer_Setup_1.8.5 (someone referred)
Click to expand...
Click to collapse
Then this is definitely a driver problem...
If you tried multiple drivers then post your OS and problem here and help will be there at your rescue...
this will work for other unbranded device?
Yash98 said:
SP Flash Tool GuideFeatures:
Revives your phone from almost any brick!
Fixes the WiFi and Bluetooth (only software problem), created due to some wrong permissions.
Flash CWM Recovery
Flash Custom ROMs
Root your device without a root exploit.
Requirements (click on softwares below to download):
SP Flash Tool
Micromax Canvas 4/HD Drivers
Micromax Canvas
Micro USB Cable
Windows PC/Laptop
Procedure (for flashing Firmwares):
Download all (software) requirements to a folder
Download the files/folder to be flashed to a folder ( Here is the Stock ROM for Canvas 4: http://www.tusfiles.net/agbdwr69sc8s )
Extract it to a folder (this is the extracted firmware for this guide)
Install drivers & extract SP Flash Tool to a folder
Open Flash_tool.exe
Click Scatter-loading
Select MT6589_Android_scatter_emmc.txt (for Canvas 4) found in extracted firmware
Click Download button or press F9
Shutdown your Canvas 4 and connect it with Micro USB to PC running the Flash Tool
See it flashing before your eyes and wait for a green circle to show up on your PC to indicate successful flashing.
Restart phone and Done!
To be added:
Screenshots.
Click to expand...
Click to collapse
I'm currently on MIUI, I want to switch back to the sock rom of Canvas 4.
I tried following the tutorials
here : http://kalyani-786.blogspot.com/2013/12/micromax-canvas-4-a210-all-in-one-rom.html
and here : http://forum.xda-developers.com/showthread.php?t=2466694
but I had the same issue both times.
When I connect the phone (switched off) it connects (I can hear the sound) and then disconnects (again the sound) and starts charging.
I used the PdaNet+ drivers, the drivers of canvas hd (a116), and many others (Names of all the drivers further below the thread)
I tried using a different cable,removing the battery, different USB ports, multiple PC's, and 64bit versions of Windows 7, and windows 8/8.1, still, had the same issue..
Can someone tell me what I'm doing wrong?
What I did :
Open the SP flash tool (with admin permissions)
Load the scatter file
Check the box that says 'DA DL All With Check Sum'
Hit download
Connect the phone (switched off)
Now the issue starts, it connects, then disconnects, and starts charging.
The flash tool, it just keeps on searching for my phone.
Other Drivers I tried :
Micromax A116&A240 Drivers (from XDA)
a116_driver (from Micromax India download section)
AdbDriverInstaller (from XDA)
MTK6589_PdaNET_ADB_VCOM_Drivers (from the first tutorial link above)
PDAnet_4150 (from PDA website)
PdaNetA4126 (from PDA website)
MyPhoneExplorer_Setup_1.8.5 (someone referred)
ManoharMaddineni said:
I'm currently on MIUI, I want to switch back to the sock rom of Canvas 4.
I tried following the tutorials
here : http://kalyani-786.blogspot.com/2013/12/micromax-canvas-4-a210-all-in-one-rom.html
and here : http://forum.xda-developers.com/showthread.php?t=2466694
but I had the same issue both times.
When I connect the phone (switched off) it connects (I can hear the sound) and then disconnects (again the sound) and starts charging.
I used the PdaNet+ drivers, the drivers of canvas hd (a116), and many others (Names of all the drivers further below the thread)
I tried using a different cable,removing the battery, different USB ports, multiple PC's, and 64bit versions of Windows 7, and windows 8/8.1, still, had the same issue..
Can someone tell me what I'm doing wrong?
What I did :
Open the SP flash tool (with admin permissions)
Load the scatter file
Check the box that says 'DA DL All With Check Sum'
Hit download
Connect the phone (switched off)
Now the issue starts, it connects, then disconnects, and starts charging.
The flash tool, it just keeps on searching for my phone.
Other Drivers I tried :
Micromax A116&A240 Drivers (from XDA)
a116_driver (from Micromax India download section)
AdbDriverInstaller (from XDA)
MTK6589_PdaNET_ADB_VCOM_Drivers (from the first tutorial link above)
PDAnet_4150 (from PDA website)
PdaNetA4126 (from PDA website)
MyPhoneExplorer_Setup_1.8.5 (someone referred)
Click to expand...
Click to collapse
Here this is the answer to everything: http://www.tusfiles.net/7z4wk4m92et5
++++
Also this: http://forum.xda-developers.com/showthread.php?t=2180436
badagila said:
this will work for other unbranded device?
Click to expand...
Click to collapse
Yep for every goddamn MTK device this is.
Yash98 said:
Yep for every goddamn MTK device this is.
Click to expand...
Click to collapse
what about on 3t technology tab? are familiar with it?
Yash98 said:
Here this is the answer to everything: http://www.tusfiles.net/7z4wk4m92et5
++++
Also this: http://forum.xda-developers.com/showthread.php?t=2180436
Click to expand...
Click to collapse
My phone just keeps disconnecting and re connecting to the PC when I try to connect it with the battery, sim, and sd card taken out. (also holding the vol+ button)
Also, can you upload the file to mediafire? TrustFiles has a lot of **** between the file and the user...
CHECK OUT THE NEW WIN 8.1/8/7 64 bit DRIVERS DIRECT BACKUP FROM A WORKING WIN8.1 64BIT INSTALL
BUT MAKE SURE TO: Disable Driver Signature Enforcement (google it exactly like this for instructions)
NOTE: This may show an attention mark in Device Manager. Completely ignore that!
Yash98 said:
If you are facing the same or similar problems as this:
Then this is definitely a driver problem...
If you tried multiple drivers then post your OS and problem here and help will be there at your rescue...
Click to expand...
Click to collapse
I tried this on windows 7, and windows 8.
ManoharMaddineni said:
I tried this on windows 7, and windows 8.
Click to expand...
Click to collapse
Try this driver, now this driver comes from a backup from my Windows 8.1 Pro 64Bit install and should work on your Win8 64bit too,
though you HAVE to disable Driver Signature Enforcement (google it) or else it won't install..
https://mega.co.nz/#!AQwnVapB!ZaC53xZxSoG8dwRqLZFKguXvJJVuEshc4JPtz5yZYGs
can u say a flash tool for micromax a111?? is this flash tool can be used for micromax a111 doodle which is of same msm8225q chipset number ??
Yash98 said:
If you are facing the same or similar problems as this:
Then this is definitely a driver problem...
If you tried multiple drivers then post your OS and problem here and help will be there at your rescue...
Click to expand...
Click to collapse
Tried the new drivers, not working either. my phone just keeps charging. the flashing process does not start what so ever,,,
hi yash98
I have two phone
one is soft bricked and one is working
there is no ROM available anywhere for this phone
is it possible to extract the rom from the working phone and use it to flash to the bricked phone?
any tutorial on how to do this?
thank you
Urgent help required
Yash98 said:
SP Flash Tool GuideFeatures:
Revives your phone from almost any brick!
Fixes the WiFi and Bluetooth (only software problem), created due to some wrong permissions.
Flash CWM Recovery
Flash Custom ROMs
Root your device without a root exploit.
Requirements (click on softwares below to download):
SP Flash Tool
Micromax Canvas 4/HD Drivers (NEW!) (Windows 8.1/8/7/Vista 64-bit) [NEED TO DISABLE DRIVER SIGNATURE ENFORCEMENT] ||| Others (for 32bit Windows)
Micromax Canvas
Micro USB Cable
Windows PC/Laptop
Procedure (for flashing Firmwares):
Download all (software) requirements to a folder
Download the files/folder to be flashed to a folder ( Here is the Stock ROM for Canvas 4: Mod Edit...PPC Click Removed )
Extract it to a folder (this is the extracted firmware for this guide)
Install drivers & extract SP Flash Tool to a folder
Open Flash_tool.exe
Click Scatter-loading
Select MT6589_Android_scatter_emmc.txt (for Canvas 4) found in extracted firmware
Click Download button or press F9
Shutdown your Canvas 4 and connect it with Micro USB to PC running the Flash Tool
See it flashing before your eyes and wait for a green circle to show up on your PC to indicate successful flashing.
Restart phone and Done!
To be added:
Screenshots.
Click to expand...
Click to collapse
have canvas 4 a210 problem with imei ( at command send fail) which occurred at changing rom, some on adviced sp flash
but cant use pc since there was charging hardware problem hence usb port cant be used hardware problem ( charging via external battery charging taken out) . need SP tool from sd card if available
thanks
@jjwaiting4u Currently impossible only through Micro USB port possiblity
help needed
yash got my phone repaired
there was no problem except rain water that had shorted, cleaning the components helped
well
downloaded sptool from another place (your having problem) ,mt 6589 scatter files, recover.imp
connected : usb in off mode... loaded scatter and recover file.......... clicked down load .................nothing
there is something i am not doing right....( PLease note only recovery and boot is with path others dont have any)
thanks for help rendered
jj
big mess
Yash98 said:
SP Flash Tool GuideFeatures:
Revives your phone from almost any brick!
Fixes the WiFi and Bluetooth (only software problem), created due to some wrong permissions.
Flash CWM Recovery
Flash Custom ROMs
Root your device without a root exploit.
Requirements (click on softwares below to download):
SP Flash Tool
Micromax Canvas 4/HD Drivers (NEW!) (Windows 8.1/8/7/Vista 64-bit) [NEED TO DISABLE DRIVER SIGNATURE ENFORCEMENT] ||| Others (for 32bit Windows)
Micromax Canvas
Micro USB Cable
Windows PC/Laptop
Procedure (for flashing Firmwares):
Download all (software) requirements to a folder
Download the files/folder to be flashed to a folder ( Here is the Stock ROM for Canvas 4: Mod Edit...PPC Click Removed )
Extract it to a folder (this is the extracted firmware for this guide)
Install drivers & extract SP Flash Tool to a folder
Open Flash_tool.exe
Click Scatter-loading
Select MT6589_Android_scatter_emmc.txt (for Canvas 4) found in extracted firmware
Click Download button or press F9
Shutdown your Canvas 4 and connect it with Micro USB to PC running the Flash Tool
See it flashing before your eyes and wait for a green circle to show up on your PC to indicate successful flashing.
Restart phone and Done!
To be added:
Screenshots.
Click to expand...
Click to collapse
Hi yash bhai
things are going from bad to worst but i am not giving up.....so need U
as per your post even can can unbrick canvas4 ....
while using sp too; i used format ( to factory format)
now nothing happens ( pressing down Vol +/_ and power ) cant go into recovery
please help.....
will be great full ( have canvas 4 stock rom downloaded)........?
Driver problem solved
I had the same problem, phone connecting then disconnecting.
Here is a solution for the problem.
1. Install latest drivers
2. Disconnect phone
3. Open SP Flash Tool
4. Select Scatter-loading and select the files required
4. Now here is the trick, in SP Flash Tool, go to ACTION > DOWNLOAD
5. Connect the phone (which should be switched off)
Related
MICROMAX A78 ROOTED!!!
Guys!!! Micromax a78!! rooted!!!
So, here are the steps on getting root access on MICROMAX A78-
What you need
1. MICROMAX A78, data usb cable.
2. Download the Rooted Boot image file from the attachment below this post.
3. Download SP Flash Tool v2.1 from HERE.
4. Download MTK65xx Driver from HERE.
5. Download the MTK6573 Scatter.txt file from the attachment below this post.
6. Lastly download SuperOneClick root application for windows (search google), and install it...it will also install the adb drivers needed while rooting.
Installation Steps-
1. Unzip and Install the MTK65xx USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and connect using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Do not switch on the phone
2. Copy the "rootedboot.img" file that you downloaded from my attatchment. Rename it to be boot.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6573_Android_scatter. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "BOOT". Leave boot checked. Now click on the "BOOT" just right to the checkbox and browse and select the boot.img (which was earlier rootedboot.img) file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this then Congrats You have flashed the unlocked boot.img!
NOW FOR ACTUAL ROOTING:
1. Restart your phone, now when the phone boots up, enable "usb debugging".
2. Now run SuperOneClick, and click "root"..after the process finishes, the a78 will be fully rooted with Superuser app installed!!.
Check by installing root checker from play store!!!
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
Credits!
I, Me, Myself
GUYS! If u think my hardwork is worth something, do press the "Thanks" button below! Thank You! :fingers-crossed:
awesome work !!!
thankyou buddy !!! my phone is finally rooted now waiting for a custom recovery ........
I'll also make a custom recovery if you are interested
Sent from my Micromax A110 using xda app-developers app
I will post the result after testing your method on my A78. Lets hope for something good
Bro!! You are the best.. Thanks a lot!!!
abs_dear said:
Bro!! You are the best.. Thanks a lot!!!
Click to expand...
Click to collapse
That's good to know! Any problems anybody faces,m always there
Sent from my Micromax A110 using xda app-developers app
WOOT WOOT
vshlkmr buddy you are the BEST :good:
i tried with SOC bt didnt wrk..n i ws worried to play with SP flash tool coz i dnt hv any alternt phone...excellent job man...
will root my phone ASAP n let u know if i get any problms..
it'll be perfect if you can provide CWM recovery...
THANKS again..
Hi,
Facing a strange issue and that too at very first step. When I am connecting the phone (Switched Off) to USB Cable after Driver Installation, Windows detects the device and tries to install MT65xx PreLoader. But after a few seconds, it shows the error: Device Unplugged.
Can you plz help to resolve this ?
Thanks,
Param
paramjeetgem said:
Hi,
Facing a strange issue and that too at very first step. When I am connecting the phone (Switched Off) to USB Cable after Driver Installation, Windows detects the device and tries to install MT65xx PreLoader. But after a few seconds, it shows the error: Device Unplugged.
Can you plz help to resolve this ?
Thanks,
Param
Click to expand...
Click to collapse
Ok, I am able to resolve this by Disabling Searching Windows Update for Device Drivers.
And, YES, I have rooted my A78
Big Big Thanks to vshlkmr
Phone Finally from rotted to Rooted
Thanks Buddy...
Phone is finally of some use now.
vshlkmr said:
I'll also make a custom recovery if you are interested
Click to expand...
Click to collapse
Yes, we are very interested. please make a custom recovery for a78.
Thanks
At last found the way to flash our phones with "Windows 8 x64"
I flashed my CHD with 4.2.1 orginal stock fw in the following steps:-
1) download Usbdeview
http://www.mediafire.com/download/41i2k36yyi1fzhz/usbdeview-x64.zip
2) unistall all the MTK65xx drivers u get in it (remember to use this as admin)
3)Reboot ur PC
4)Download Sp drivers for win8
http://www.mediafire.com/download/7yee2of64nhl947/SP_Drivers_v1.4.rar
5)Now open Device manager (right click on My Computer>Manage>Device manager)
6)Remove the battery and connect the phone via USB u will see unknown device in device manager and then MTK65xx Preloader
7)Quickly Right click on the MTK65xx preloader and update driver go for manual and then give the path for sp tools and just select the folder inside SP tools
8) u will c dialouge box asking for installing here select install anyway
9)and u r done.. u will here sound of disconnected device
10)connect again and u will c your device appearing and dissapearing on COM ports
11) Now open sp flash tools use this 1
http://www.mediafire.com/download/wd8au297r6w9qzd/SP_Flash_Tool_v3.1304.0.119.rar
12)dont forget to open sp tools in admin mode..
13) select the scatter file and make sure u have disconnected ur phone
14) select USB in options and force to high speed
15) Press Firmware Upgrade and then insert USB cable to ur phone
16) Sit back for 5-6 min until u c a green circle on ur screen.
as soon as u see green circle just remove the USB cable and plug in ur battery and boot your mobile
Digital signature error
when i try to install the drivers through your procedure it shows an error that the third party inf does not contain digital signature information
Not able to update A116 4.2.1 on Win8 x64
Tried numerous times. I Above mentioned procedure does not work! Certificate error shows up!
It did work. Thanks. The preloader will really disappear but as you use the flash tool it will automatically detect the driver.
Links for
1. The Stock V3 is:
https://docs.google.com/uc?id=0B74b7RoIPJyfcVJKSzAtQUM5Q0k&export=download
2. SP Tool for A117 is:
http://d-h.st/tvi
3. USB Driver For A117 is:
http://www.mediafire.com/download/e6c4j3d8j6c5ui3/MTK+Universal+Drivers.rar
to Flash STOCK V3 with SP tool... follow the guide:
1. Download Flash Tool , Stock ROM AND USB Driver From Above LINK
2. Now install SP Tool drvers. see: http://forum.xda-developers.com/canvas-magnus/general/install-usb-drivers-sp-tools-magnus-a117-t2705967
3. NOW Create Folder IN Desktop Give It Name "FLASH"
4. Copy All Downloaded File In Recently Created Folder "FLASH"
5. Extract 'SP_Flash_Tool_v3.1304.0.119.rar' AND Also Extract Stock ROM File
6. NOW Open SP Flash Tools Folder AND Double Click ON "Flashtool.exe"
7. In Flashtool..Click On SCATTER-LOADING(FOUND IN RIGHT-SIDE) AND Select SCATTER File From STOCK ROM'S Folder
8. Flashtool Automatic Select All IMGs AND FILEs
9. NOW Completely Turn Off Your Phone
10. In Flashtool..Click On "DOWNLOAD" Button
11. Install USB Driver AND Connect Your Device To Computer
12. If Everything Is Right Then Process Will Start...Wait Till All Progress Completion
13. After All Process "GREEN CIRCLE" Appear In Center..
14. DISCONNECT PHONE AND POWER ON...THAT'S ALL
[instructions by Krunal32 and Rht555]
thats all.... enjoy
and if it helps.. PRESS THE THANKS BUTTON
checksum
PiyushGupta said:
Links for
1. The Stock V3 is:
https://docs.google.com/uc?id=0B74b7RoIPJyfcVJKSzAtQUM5Q0k&export=download
2. SP Tool for A117 is:
http://d-h.st/tvi
3. USB Driver For A117 is:
http://www.mediafire.com/download/e6c4j3d8j6c5ui3/MTK+Universal+Drivers.rar
to Flash STOCK V3 with SP tool... follow the guide:
1. Download Flash Tool , Stock ROM AND USB Driver From Above LINK
2. Now install SP Tool drvers. see: http://forum.xda-developers.com/canvas-magnus/general/install-usb-drivers-sp-tools-magnus-a117-t2705967
3. NOW Create Folder IN Desktop Give It Name "FLASH"
4. Copy All Downloaded File In Recently Created Folder "FLASH"
5. Extract 'SP_Flash_Tool_v3.1304.0.119.rar' AND Also Extract Stock ROM File
6. NOW Open SP Flash Tools Folder AND Double Click ON "Flashtool.exe"
7. In Flashtool..Click On SCATTER-LOADING(FOUND IN RIGHT-SIDE) AND Select SCATTER File From STOCK ROM'S Folder
8. Flashtool Automatic Select All IMGs AND FILEs
9. NOW Completely Turn Off Your Phone
10. In Flashtool..Click On "DOWNLOAD" Button
11. Install USB Driver AND Connect Your Device To Computer
12. If Everything Is Right Then Process Will Start...Wait Till All Progress Completion
13. After All Process "GREEN CIRCLE" Appear In Center..
14. DISCONNECT PHONE AND POWER ON...THAT'S ALL
[instructions by Krunal32 and Rht555]
thats all.... enjoy
and if it helps.. PRESS THE THANKS BUTTON
Click to expand...
Click to collapse
Hi,
Thanks for sharing. What's the valid checksum of Stock V3 ROM?
Checksum for STOCK V3
Checksum is [ed2c00354eb7a6d0d080453574e91b42]
enjoy.
Checksum for STOCK V3
PiyushGupta said:
Checksum is [ed2c00354eb7a6d0d080453574e91b42]
enjoy.
Click to expand...
Click to collapse
Thanks.
Drivers please help.
Please help me install the drivers.
I'm running Windows 8.1 and my phone is not being recognized.
I've followed all the steps properly but I'm not getting the phone to even show up on the device manager. SP tools refusing to detect. Thoroughly frustrated and wasted 3 days on this.
abhishekmaha said:
Please help me install the drivers.
I'm running Windows 8.1 and my phone is not being recognized.
I've followed all the steps properly but I'm not getting the phone to even show up on the device manager. SP tools refusing to detect. Thoroughly frustrated and wasted 3 days on this.
Click to expand...
Click to collapse
Use only latest sp flash tool.
But I did! Still not recognizing. Nothing's happening, and no yellow bar is coming.. I downloaded the latest version of sptools, tried about 6 different versions of drivers, but my phone is not visible even as an unknown device on the device manager.
abhishekmaha said:
But I did! Still not recognizing. Nothing's happening, and no yellow bar is coming.. I downloaded the latest version of sptools, tried about 6 different versions of drivers, but my phone is not visible even as an unknown device on the device manager.
Click to expand...
Click to collapse
Yo!!
well all the things worked properly for me as well as for another users..
soo @abhishekmaha did you installed the drivers from the given link or from any other source??
i insist you to download and install the drivers from here:
http://forum.xda-developers.com/canvas-magnus/general/install-usb-drivers-sp-tools-magnus-a117-t2705967
Try it and then let me know.
i'll always be happy to help
PiyushGupta said:
Yo!!
well all the things worked properly for me as well as for another users..
soo @abhishekmaha did you installed the drivers from the given link or from any other source??
i insist you to download and install the drivers from here:
http://forum.xda-developers.com/canvas-magnus/general/install-usb-drivers-sp-tools-magnus-a117-t2705967
Try it and then let me know.
i'll always be happy to help
Click to expand...
Click to collapse
ROM File size is 900 MB !1 Is it the right file ?
Download Error
PiyushGupta said:
Checksum is [ed2c00354eb7a6d0d080453574e91b42]
enjoy.
Click to expand...
Click to collapse
I tried to download this several times, but it fails at nearly 800MB. Please help.
@rubenhardy
Yes this is the Right file..
Dont worry it's checked by me and other users too.
@Myanju
No download error cuz of the link..
there may be some problem with you system or network..
you can see the screenshot about the successful download.
Network Error
PiyushGupta said:
@rubenhardy
Yes this is the Right file..
Dont worry it's checked by me and other users too.
@Myanju
No download error cuz of the link..
there may be some problem with you system or network..
you can see the screenshot about the successful download.
Click to expand...
Click to collapse
Hi,
I have attached screen shot of what i faced. please look into this and let me know what actions i should take.
Use IDM or some other downloder
Hi..
what are the features of stock v3.
does it mean kernal version
pls help
---------- Post added at 06:46 AM ---------- Previous post was at 06:39 AM ----------
what are its features....
Emergency calls only problem
HI there , firstly there was problem for invalid IMEI, i got it resolved by flashing sec_ro file again. but now its showing emergency calls only. my phone is able to detect SIM card but showing emergency calls only.
is there any modem patch that can help.
pls help.:crying:
CWM AND BACKUP
1. Download and install drivers Driver_Auto_Installer_v1.1236.00.7z.
If not working try these too PDAnet_4150.rar.
Problem in installation?? Go here
Or use the drivers i use:here (install legacy drivers, google)
2. Download scatter from attachments .
3. Open SP flash tools, load scatter in sp flash tools and go to read back tab.
4. Click 'Add' and tap on added read back entry.
5. Select any path to save file and click ok, write 0x03d80000 in length and click ok.
6. Click on read back and connect phone without battery. Wait till it completes.
7. Once you see a green circle, close sp flash tools and switch on the phone.
8. When the phone is on, connect it to pc. See if any notification of 'usb debugging' comes in phone, if not, go to settings->about phone->and tap build number 7 times to enable debugging options.
9. Go back and enter developers options(in settings), and check usb debugging on.
10. Now run mtk driod tools and it will detect phone.
11. In mtk droid tools, click 'root, backup and recovery' tab.
12. Click 'To process file ROM_ from Flash Tool.
13. Locate the file you got from read back.
14. Say yes to make CWM recovery automatically.
15. Now wait again.
Once done, you will get your sp flashable backup in MTK Driod Tools/backup.
Read back complete.
FLASHING CWM AND ROOT:
1. Start SP flash tools and click on 'recovery' in sp flash tools and select the CWM recovery made by mtk droid tools (Micromax-A190_xxxx_recovery_) .
2. Click Download in sp flash tools, remove the battery from phone and connect it to pc.
A green circle/download ok will confirm flashing.
3. Insert battery and reboot to recovery. Make a Backup.
4. Select install from sd card and select Unite_2_4.4.2_Proper root......zip and say yes to flash.
5. Reboot, Done.
Finally it happens.. I rooted my phone successfully, n it's confirmed working ☺☺hands down Bro.. U r the man.. Big big cheers for the dev to make it happen.. Thanks a million times bro.. Another fabulous work for us.. God bless u ???
please reply that doing read back is important whats that
Vishesh said:
Finally it happens.. I rooted my phone successfully, n it's confirmed working ☺☺hands down Bro.. U r the man.. Big big cheers for the dev to make it happen.. Thanks a million times bro.. Another fabulous work for us.. God bless u ???
Click to expand...
Click to collapse
brother please help to install drivers iam not able to install drivers when iconnect my phone to pc wid no battery preloader usb vcom driver installation comes but then it says device unplugged Another thing, when I connect my A190 phone without battery, the device manager list updates itself every two seconds: once it shows the preloader vcom port and then in the next refresh there's no vcom port and this process repeats. Any idea why?
Can you please give Canvas HD Plus Stock Wallpapers.. Please...
somu12345 said:
brother please help to install drivers iam not able to install drivers when iconnect my phone to pc wid no battery preloader usb vcom driver installation comes but then it says device unplugged Another thing, when I connect my A190 phone without battery, the device manager list updates itself every two seconds: once it shows the preloader vcom port and then in the next refresh there's no vcom port and this process repeats. Any idea why?
Click to expand...
Click to collapse
that 2 seconds is what important ..
u hav to click tat vcom port and choose update driver with the one u downloaded
While trying some mods for Unite 2 , my phone got bricked, i must have done something wrong because those mods are working for others. so it was completely my mistake. so i spent my last 4 hours trying to find a solution and this is how i finally got it work.
JUST WANT TO REMIND YOU THAT TRY THIS GUIDE ON YOUR ON RISK, IM NOT GIVING YOU ANY GUARANTEE THAT IT WILL GOING UNBRICK YOUR DEVICE, IM JUST SHARING THE METHOD WHICH WORKED FOR ME
MY DEVICE
MICROMAX UNITE 2 4GB
KITKAT 4.4.2
following was the symptoms of my device only try this guide if yours are identical to mine
Phone was not booting up (nothing was happening no matter how long i press power button)
wasn't booting into to recovery mode also notification led was not turning on when plugged to PC (i.e No charging)
windows was making device plugged and unplugged sound over and over again when i was connecting it to pc using data cable
now from the 3rd point i figured out that my phone was being detected by my pc but only for a brief moment
so after searching for a while i found out that it was a problem with the PRELOADER and device was trying load META mode(donAt have any clue what that is) so i needed to Install MTK65XX Preloader USB Vcom Drivers for SP Flash Tools.
this is how i did it
Step 1 :Firstly Download MTK USB VCOM Drivers from here
DOWNLOAD
the extract it
Step 2 : Now open Device Manager in your PC by right clicking on My Computer and then click on Manage.
Step 3 :Next go to Device Manager in that and click on your PC name and then click on Add legacy hardware, see below
Step 4 : Now in Add Hardware Wizard click on Next >> Install the Hardware that i manually select from a list (Advanced) >> Show All Devices >> Next >>Have a Disk >> Browse, Now select the inf file according to your OS and from where you extracted the downloaded drivers.
Step 5 : Now click on Next on the wizard to install the drivers and when promoted for security issue just click on install any anyway to finish the driver installation.
Step 6 : After installation finish restart your PC.
Source
now remove battery of your phone and then plug it to your pc using data cable While Holding Volume up button
the windows will recognize it and install drivers, now open device manager and if you find a device under Ports(Com&LPT) which has Mediatek, MTK, USB, VCOM,PRELOADER keywords in it then you are good to go
now download SP Flash Tool
Devhost l Mediafire
and Factory rom
Download
and then extract the Factory rom archive
Then flash Stock ROM by following these steps:
Step 1: Open SP flash tool and load the Scatter file of Stock ROM it is inside the extracted factory rom folder
Step 2: Select Format all+Download in drop-down menu.
Step 3:Remove the battery of your phone.
Step 4:Click Download in SP Flash Tool.
Step 5:connect your phone to pc via USB cable while holding volume up button you can release volume button when the process is stared . Wait for flashing to complete .
Step 6: when the process is completed unplug the phone, insert the battery and then turn it one hopefully it should boot now and you should see Micromax logo just remember first boot take long time so just wait for it to completely boot
if this doesn't work then don't loose hope keep on searching for other ways ,
Nice one.... Will be helpful for some