Database Info

INSTALLING CWM on ZOPO ZP900 LEADER

This method successfully installs the CWM on the phone. CWM version supplied by ZOPO does not work. Use the CWM posted in the second link
I am a still learning and not a developer !
Hi All ZOPO ZP900 Leader Owners,
This is a guide for Installing Clock Work Mod Recovery Image on ZOPO ZP900 Leader Phone. Most of the owners of this fantastic phone would have desperately tried like me to install CWM on this phone (some may have found success). ZOPO does gives an option to order the phone pre-rooted however they do not install CWM ....or for that matter there is no Stock Recovery on the phone !!!. Start the phone with Power + Volume Up button pressed and your presented with an image of sick Android lying down with a Red triangle coming out of his opened stomach :laugh:
DONT TRY TO USE ROM MANAGER APP TO INSTALL CWM, THIS WILL ONLY BRICK YOUR PHONE !
So after breaking my head for couple of days, searching the net, downloading stuff I have successfully installed CWM !
So here are the steps !.
What you need
1. ZOPO ZP900 Leader phone
2. Download Fully working English CWM from here http://www.4shared.com/file/16vuWyiU/recovery.html. The one posted in Zopo website does not work.
3. Download latest SP Flash Tool for MTK6577 from here http://www.4shared.com/zip/Xgc3G_hB/SP_Flash_Tool_v3122200.html
4. Download the latest Stock ICS ROM for ZP900 from Zopo website link http://www.4shared.com/rar/hGY2ahbu/MP_MT77_root_en_play_fix_zp900.html
5. Download MTK6577 Driver from Zopo website http://www.4shared.com/zip/YXlLFoLm/6577driver_install_3_steps.html
Installation Steps
1. Unzip and Install the USB drivers on your Windows PC using the MTK 6577 Driver Zip file. There will be 3 folders named First Step, Second Step & Third Step. Open First Step install the MTK driver MSI file. Post completion open Second Step, click on ClickInstall Driver, it will automatically install the USB driver. Press Exit after installation (Win 7 may give error that installation was incorrect, just ignore)
Repeat the same for folder Third Step
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2.Extract the latest ROM folder from downloaded ICS ROM. You will get 2 folders
database
MP_MT77_h958_zp900_zwx_ics_20120912-155136_TSZ_PC
Open the second folder (MP_MT77***). This is the folder that has all the image files. You will find recovery.img file. This is original file. You can either rename it or keep a back up and delete it.
3. Copy the new CWM recovery.img file that you downloaded from ZOPO website in this folder. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5.Click on Options, USB Mode will be checked, DA Download All will be checked, in the sub options Speed will be Checked High Speed, Battery select With Battery. Come to the main Application window
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your extracted ICS ROM folder, click on folder MP_MT77****. By default you will have only one map file of name MT6577_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked.
9. Now click on "Download" on the Application or press F9 on keyboard. A warning message will pop up. Press YES
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Up button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
Now I hope this opens the door for many other things !
Additional Info -
Install PDAnet from here http://www.junefabrics.com/android/download.php or Snappea from www.snappea.com to make your device get recognized when connected to the computer. Install this with your phone switched on, this software installs the necessary drivers for the phone, post which you can use flash tool.

reserved
The CWM from taiwan101 for the 9300+ seems to be working fine. I was able to install .zip file from SD card. However the CWM is in Taiwanese, so if anyone can provide the CWM in English, thanks in advance
link for 9300+ CWM http://d01.megashares.com/dl/KicT315...M_Recovery.rar
UPDATE - Finally got a full working English CWM for ZOPO extracted from Mod ROM posted thanks to Kyrie1965. Tested and everything is working. Download from here http://www.4shared.com/file/16vuWyiU/recovery.html

vijayar said:
This method successfully installs the CWM on the phone. CWM as such works (able to navigate through the menus etc) but some of the function such as Install from ZIP, Backup etc, mount are not working, Gives an error Unable to Mount Sdcard !. Not sure if the issue is with CWM version supplied by ZOPO, need to try with other/older versions of CWM.
Please feel free to post links of CWM that works
I am a still learning and not a developer !
Hi All ZOPO ZP900 Leader Owners,
This is a guide for Installing Clock Work Mod Recovery Image on ZOPO ZP900 Leader Phone. Most of the owners of this fantastic phone would have desperately tried like me to install CWM on this phone (some may have found success). ZOPO does gives an option to order the phone pre-rooted however they do not install CWM ....or for that matter there is no Stock Recovery on the phone !!!. Start the phone with Power + Volume Up button pressed and your presented with an image of sick Android lying down with a Red triangle coming out of his opened stomach :laugh:
DONT TRY TO USE ROM MANAGER APP TO INSTALL CWM, THIS WILL ONLY BRICK YOUR PHONE !
So after breaking my head for couple of days, searching the net, downloading stuff I have successfully installed CWM !
So here are the steps !.
What you need
1. ZOPO ZP900 Leader phone
2. Download latest CWM from the link provided in Zopo Website http://www.4shared.com/file/lp0t5E1t/cmw-recovery.html
3. Download latest SP Flash Tool for MTK6577 from here http://www.4shared.com/zip/Xgc3G_hB/SP_Flash_Tool_v3122200.html
4. Download the latest Stock ICS ROM for ZP900 from Zopo website link http://www.4shared.com/rar/hGY2ahbu/MP_MT77_root_en_play_fix_zp900.html
5. Download MTK6577 Driver from Zopo website http://www.4shared.com/zip/YXlLFoLm/6577driver_install_3_steps.html
Installation Steps
1. Unzip and Install the USB drivers on your Windows PC using the MTK 6577 Driver Zip file. There will be 3 folders named First Step, Second Step & Third Step. Open First Step install the MTK driver MSI file. Post completion open Second Step, click on ClickInstall Driver, it will automatically install the USB driver. Press Exit after installation (Win 7 may give error that installation was incorrect, just ignore)
Repeat the same for folder Third Step
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2.Extract the latest ROM folder from downloaded ICS ROM. You will get 2 folders
database
MP_MT77_h958_zp900_zwx_ics_20120912-155136_TSZ_PC
Open the second folder (MP_MT77***). This is the folder that has all the image files. You will find recovery.img file. This is original file. You can either rename it or keep a back up and delete it.
3. Copy the new CWM recovery.img file that you downloaded from ZOPO website in this folder. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5.Click on Options, USB Mode will be checked, DA Download All will be checked, in the sub options Speed will be Checked High Speed, Battery select With Battery. Come to the main Application window
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your extracted ICS ROM folder, click on folder MP_MT77****. By default you will have only one map file of name MT6577_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked.
9. Now click on "Download" on the Application or press F9 on keyboard. A warning message will pop up. Press YES
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Up button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
Now I hope this opens the door for many other things !
Click to expand...
Click to collapse
hey will this work on hero 9300+ ,512mb ram .
i have ordered one and will soon arrive.
will try to make some custom roms.

B rom error:
hi there does anyone has flash the zopo900 leader and got the message B ROM ERROR: S_COM_PORT_OPEN_FAIL (1013)
It wont letme flash the phone driver seems working fine but it said "single usb port" and the port assing it. please help!

Hi Vijay,
What if i dont follow the step 8 (uncheck everything except recovery). Does it cause any issue?
I am running win 7 x64 and when i run the flash tool it says searching only after i click the download

help
hey i have hero 9300+ 512mb ram
i have no network issue plz help me!:crying:

miraguilar1 said:
hi there does anyone has flash the zopo900 leader and got the message B ROM ERROR: S_COM_PORT_OPEN_FAIL (1013)
It wont letme flash the phone driver seems working fine but it said "single usb port" and the port assing it. please help!
Click to expand...
Click to collapse
Check your device drivers USB driver has not been installed properly. I faced this issue and after multiple attempts of reinstall of USB drivers the flash tool started working properly
Also you can try installing PDAnet from here http://www.junefabrics.com/android/download.php
Install this with your phone switched on, this software installs the necessary drivers for the phone, post which you can use flash tool.
Note Connect the phone to flash tool first without battery, in options select with battery, press download after selecting the required file, when it says searching unplug the phone put battery back, dont switch on, plus back the usb. The flash tool should load the required file.

senlakshman said:
Hi Vijay,
What if i dont follow the step 8 (uncheck everything except recovery). Does it cause any issue?
I am running win 7 x64 and when i run the flash tool it says searching only after i click the download
Click to expand...
Click to collapse
It will flash the entire ROM again. My guide was specifically for flashing only the CWM and not the entire ROM. I wanted to keep the Stock rom intact as it came from ZOPO.
Word of caution, I am yet top try flashing the complete ROM so if you are trying ensure that your have taken a backup via CWM (if already flashed) of your existing full working ROM before attempting anything. Also flash only ZOPO Stock or customised ROMs,

From where did you bought this mobile?
Does the imei start from 355,889,3535
Is it ips 1gb ram .
Sent from my GT-I9100 using xda premium

Anyone having problem with drivers can follow this http://www.youtube.com/watch?v=Rfemoi6Aizw
complete flashing process
Sent from my GT-I9100 using xda premium

vijayar said:
It will flash the entire ROM again. My guide was specifically for flashing only the CWM and not the entire ROM. I wanted to keep the Stock rom intact as it came from ZOPO.
Word of caution, I am yet top try flashing the complete ROM so if you are trying ensure that your have taken a backup via CWM (if already flashed) of your existing full working ROM before attempting anything. Also flash only ZOPO Stock or customised ROMs,
Click to expand...
Click to collapse
I have installed the drivers, while the phone is on using pdanet and i powered off and ran the flash tool first without battery (with battery option) and put the battery back in. but i got message stating please insert usb and Flashtool have this alert.
Not sure, where i am missing the steps

plz also have a look at previous posts u will get your answer.

senlakshman said:
I have installed the drivers, while the phone is on using pdanet and i powered off and ran the flash tool first without battery (with battery option) and put the battery back in. but i got message stating please insert usb and Flashtool have this alert.
Not sure, where i am missing the steps
Click to expand...
Click to collapse
i too was having this problem but i tried the MTK6575 DRIVER and it worked maybe give it a try

Hey guys, I want to try this on my hero 9300+.
Is it safe?

Working
bhargav1991 said:
hey will this work on hero 9300+ ,512mb ram .
i have ordered one and will soon arrive.
will try to make some custom roms.
Click to expand...
Click to collapse
Confirmed working on 9300+
Follow the tutorial exactly as written.
---------- Post added at 10:38 PM ---------- Previous post was at 10:28 PM ----------
Israeleet said:
Hey guys, I want to try this on my hero 9300+.
Is it safe?
Click to expand...
Click to collapse
This is a copy of cwm with the specific support for the MTK6577 used by the 9300+
So yes it safe.
---------- Post added at 10:46 PM ---------- Previous post was at 10:38 PM ----------
bhargav1991 said:
hey i have hero 9300+ 512mb ram
i have no network issue plz help me!:crying:
Click to expand...
Click to collapse
Make sure you removed the battery long enough from your phone.
You may also have to reboot your pc a couple of times.

Wtf .
I am talking about the no service issue,it doesn't have any relation
With battery or pc :what:
Anyways its an imei issue.
Sent from my GT-I9100 using xda premium

vattmann said:
i too was having this problem but i tried the MTK6575 DRIVER and it worked maybe give it a try
Click to expand...
Click to collapse
Yessss , it did worked by using the MTK6575 driver :good:

bhargav1991 said:
Wtf .
I am talking about the no service issue,it doesn't have any relation
With battery or pc :what:
Anyways its an imei issue.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
YTF
This is the CWM forum.

Has anyone tried tw5 launcher on this ?
Sent from my GT-I9100 using xda premium

bhargav1991 said:
Anyone having problem with drivers can follow this http://www.youtube.com/watch?v=Rfemoi6Aizw
complete flashing process
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Hello bhargav1991, i got some questions:
1. I've buy zp900 but it will arrive next week. In the video you posted there is a guide how to flash the official Zopo z900 latest stock ROM but in this way you get the latest rom + root but no ClockWorkMod Recovery installed ?¿¿
2. My intention as i done with my old..HTC Desire HD is flashing ClockWorkMod Recovery and install the latest Zp 900 stock ROM + ROOT. So following the 1st post and once all steps are done one by one, will I get the same rom that come installed ?¿ but non root ?¿
I need to download the latest ZOPO ROM .zip and then install it from ClockWorkMod and finally i will get the latest ROM + ROOT ¿?
Could you please help me
Thank you so much in advance guys ¡¡
:good:

[STOCK V3] Link And Installation Guide for A117 STOCK V3 ROM

Links for
1. The Stock V3 is:
https://docs.google.com/uc?id=0B74b7RoIPJyfcVJKSzAtQUM5Q0k&export=download
2. SP Tool for A117 is:
http://d-h.st/tvi
3. USB Driver For A117 is:
http://www.mediafire.com/download/e6c4j3d8j6c5ui3/MTK+Universal+Drivers.rar
to Flash STOCK V3 with SP tool... follow the guide:
1. Download Flash Tool , Stock ROM AND USB Driver From Above LINK
2. Now install SP Tool drvers. see: http://forum.xda-developers.com/canvas-magnus/general/install-usb-drivers-sp-tools-magnus-a117-t2705967
3. NOW Create Folder IN Desktop Give It Name "FLASH"
4. Copy All Downloaded File In Recently Created Folder "FLASH"
5. Extract 'SP_Flash_Tool_v3.1304.0.119.rar' AND Also Extract Stock ROM File
6. NOW Open SP Flash Tools Folder AND Double Click ON "Flashtool.exe"
7. In Flashtool..Click On SCATTER-LOADING(FOUND IN RIGHT-SIDE) AND Select SCATTER File From STOCK ROM'S Folder
8. Flashtool Automatic Select All IMGs AND FILEs
9. NOW Completely Turn Off Your Phone
10. In Flashtool..Click On "DOWNLOAD" Button
11. Install USB Driver AND Connect Your Device To Computer
12. If Everything Is Right Then Process Will Start...Wait Till All Progress Completion
13. After All Process "GREEN CIRCLE" Appear In Center..
14. DISCONNECT PHONE AND POWER ON...THAT'S ALL
[instructions by Krunal32 and Rht555]
thats all.... enjoy
and if it helps.. PRESS THE THANKS BUTTON

checksum
PiyushGupta said:
Links for
1. The Stock V3 is:
https://docs.google.com/uc?id=0B74b7RoIPJyfcVJKSzAtQUM5Q0k&export=download
2. SP Tool for A117 is:
http://d-h.st/tvi
3. USB Driver For A117 is:
http://www.mediafire.com/download/e6c4j3d8j6c5ui3/MTK+Universal+Drivers.rar
to Flash STOCK V3 with SP tool... follow the guide:
1. Download Flash Tool , Stock ROM AND USB Driver From Above LINK
2. Now install SP Tool drvers. see: http://forum.xda-developers.com/canvas-magnus/general/install-usb-drivers-sp-tools-magnus-a117-t2705967
3. NOW Create Folder IN Desktop Give It Name "FLASH"
4. Copy All Downloaded File In Recently Created Folder "FLASH"
5. Extract 'SP_Flash_Tool_v3.1304.0.119.rar' AND Also Extract Stock ROM File
6. NOW Open SP Flash Tools Folder AND Double Click ON "Flashtool.exe"
7. In Flashtool..Click On SCATTER-LOADING(FOUND IN RIGHT-SIDE) AND Select SCATTER File From STOCK ROM'S Folder
8. Flashtool Automatic Select All IMGs AND FILEs
9. NOW Completely Turn Off Your Phone
10. In Flashtool..Click On "DOWNLOAD" Button
11. Install USB Driver AND Connect Your Device To Computer
12. If Everything Is Right Then Process Will Start...Wait Till All Progress Completion
13. After All Process "GREEN CIRCLE" Appear In Center..
14. DISCONNECT PHONE AND POWER ON...THAT'S ALL
[instructions by Krunal32 and Rht555]
thats all.... enjoy
and if it helps.. PRESS THE THANKS BUTTON
Click to expand...
Click to collapse
Hi,
Thanks for sharing. What's the valid checksum of Stock V3 ROM?

Checksum for STOCK V3
Checksum is [ed2c00354eb7a6d0d080453574e91b42]
enjoy.

Checksum for STOCK V3
PiyushGupta said:
Checksum is [ed2c00354eb7a6d0d080453574e91b42]
enjoy.
Click to expand...
Click to collapse
Thanks.

Drivers please help.
Please help me install the drivers.
I'm running Windows 8.1 and my phone is not being recognized.
I've followed all the steps properly but I'm not getting the phone to even show up on the device manager. SP tools refusing to detect. Thoroughly frustrated and wasted 3 days on this.

abhishekmaha said:
Please help me install the drivers.
I'm running Windows 8.1 and my phone is not being recognized.
I've followed all the steps properly but I'm not getting the phone to even show up on the device manager. SP tools refusing to detect. Thoroughly frustrated and wasted 3 days on this.
Click to expand...
Click to collapse
Use only latest sp flash tool.

But I did! Still not recognizing. Nothing's happening, and no yellow bar is coming.. I downloaded the latest version of sptools, tried about 6 different versions of drivers, but my phone is not visible even as an unknown device on the device manager.

abhishekmaha said:
But I did! Still not recognizing. Nothing's happening, and no yellow bar is coming.. I downloaded the latest version of sptools, tried about 6 different versions of drivers, but my phone is not visible even as an unknown device on the device manager.
Click to expand...
Click to collapse
Yo!!
well all the things worked properly for me as well as for another users..
soo @abhishekmaha did you installed the drivers from the given link or from any other source??
i insist you to download and install the drivers from here:
http://forum.xda-developers.com/canvas-magnus/general/install-usb-drivers-sp-tools-magnus-a117-t2705967
Try it and then let me know.
i'll always be happy to help

PiyushGupta said:
Yo!!
well all the things worked properly for me as well as for another users..
soo @abhishekmaha did you installed the drivers from the given link or from any other source??
i insist you to download and install the drivers from here:
http://forum.xda-developers.com/canvas-magnus/general/install-usb-drivers-sp-tools-magnus-a117-t2705967
Try it and then let me know.
i'll always be happy to help
Click to expand...
Click to collapse
ROM File size is 900 MB !1 Is it the right file ?

Download Error
PiyushGupta said:
Checksum is [ed2c00354eb7a6d0d080453574e91b42]
enjoy.
Click to expand...
Click to collapse
I tried to download this several times, but it fails at nearly 800MB. Please help.

@rubenhardy
Yes this is the Right file..
Dont worry it's checked by me and other users too.
@Myanju
No download error cuz of the link..
there may be some problem with you system or network..
you can see the screenshot about the successful download.

Network Error
PiyushGupta said:
@rubenhardy
Yes this is the Right file..
Dont worry it's checked by me and other users too.
@Myanju
No download error cuz of the link..
there may be some problem with you system or network..
you can see the screenshot about the successful download.
Click to expand...
Click to collapse
Hi,
I have attached screen shot of what i faced. please look into this and let me know what actions i should take.

Use IDM or some other downloder

Hi..
what are the features of stock v3.
does it mean kernal version
pls help
---------- Post added at 06:46 AM ---------- Previous post was at 06:39 AM ----------
what are its features....

Emergency calls only problem
HI there , firstly there was problem for invalid IMEI, i got it resolved by flashing sec_ro file again. but now its showing emergency calls only. my phone is able to detect SIM card but showing emergency calls only.
is there any modem patch that can help.
pls help.:crying:

Micromax Unite 2 - Read Back Guide[Easy way]

Procedure:
1. Download and install drivers Driver_Auto_Installer_v1.1236.00.7z.
If not working try these too PDAnet_4150.rar.
Problem in installation?? Go here
2. Download scatter from here .
3. Open SP flash tools, load scatter in sp flash tools and go to read back tab. (alternative download link of sp flash tools)
4. Click 'Add' and tap on added read back entry.
5. Select any path to save file and click ok, write 0x3E180000 in length and click ok.
6. Click on read back and connect phone without battery. Wait till it completes.
7. Once you see a green circle, close sp flash tools and switch on the phone.
8. When the phone is on, connect it to pc. See if any notification of 'usb debugging' comes in phone, if not, go to settings->about phone->and tap build number 7 times to enable debugging options.
9. Go back and enter developers options(in settings), and check usb debugging on.
10. Now run mtk driod tools and it will detect phone. (alternative download link of mtk droid tools)
11. In mtk droid tools, click 'root, backup and recovery' tab.
12. Click 'To process file ROM_ from Flash Tool.
13. Locate the file you got from read back.
14. Say no to make CWM recovery automatically and cancel to choose a recovery for similar phone.
15. Now wait again.
Once done, you will get your sp flashable backup in MTK Driod Tools/backup.
Read back complete.
Now follow this guide to root your Unite 2.

Sudeep Duhoon said:
Procedure:
1. Download and install MTK VCOM drivers.
Problem in installation?? Go here
2. Open SP flash tools and go to read back tab. (alternative download link of sp flash tools)
3. Click 'Add' and tap on added read back entry.
4. Select any path to save file and click ok, write 0x3E180000 in length and click ok.
5. Click on read back and connect phone without battery. Wait till it completes.
6. Once you see a green circle, close sp flash tools and switch on the phone.
7. When the phone is on, connect it to pc. See if any notification of 'usb debugging' comes in phone, if not, go to settings->about phone->and tap build number 7 times to enable debugging options.
8. Go back and enter developers options(in settings), and check usb debugging on.
9. Now run mtk driod tools and it will detect phone. (alternative download link of mtk droid tools)
10. In mtk droid tools, click 'root, backup and recovery' tab.
11. Click 'To process file ROM_ from Flash Tool.
12. Locate the file you got from read back.
13. Say no to make CWM recovery automatically and cancel to choose a recovery for similar phone.
14. Now wait again.
Once done, you will get your sp flashable backup in MTK Driod Tools/backup.
Read back complete.
Now follow this guide to root your Unite 2.
Click to expand...
Click to collapse
1) we have to load scatter file first right?
2) how huch time it takes to readback?

codergenius said:
1) we have to load scatter file first right?
2) how huch time it takes to readback?
Click to expand...
Click to collapse
Oops, sry. That was added from day one in my pc so forgot.
Added scatter now.
About 5 mins.

anyone using win 7 pro 64 bit : able to install vcom drivers & successfully rooted unite 2 (i am unable to readback using sp flash tools...getting error as "USBSetting::SearchUSBPortPool(): Scaning USB port failed!(..\QT_FlashTool_Refactor\Conn\USBSetting.cpp,195)" in QT_FLASH_TOOL.log and error "IsValidCOMPort(): Instance ID(USB\VID_8086&PID_0189\6&1279F1F3&0&5) (FlashToolLib/host/windows/com_enum.cpp:942)" in BROM_DLL_V5.log while read back, i am not sure if it is driver issue as preloader driver gets successfully installed

green circle
Sudeep Duhoon said:
Procedure:
1. Download and install drivers Driver_Auto_Installer_v1.1236.00.7z.
If not working try these too PDAnet_4150.rar.
Problem in installation?? Go here
2. Download scatter from here .
3. Open SP flash tools, load scatter in sp flash tools and go to read back tab. (alternative download link of sp flash tools)
4. Click 'Add' and tap on added read back entry.
5. Select any path to save file and click ok, write 0x3E180000 in length and click ok.
6. Click on read back and connect phone without battery. Wait till it completes.
7. Once you see a green circle, close sp flash tools and switch on the phone.
8. When the phone is on, connect it to pc. See if any notification of 'usb debugging' comes in phone, if not, go to settings->about phone->and tap build number 7 times to enable debugging options.
9. Go back and enter developers options(in settings), and check usb debugging on.
10. Now run mtk driod tools and it will detect phone. (alternative download link of mtk droid tools)
11. In mtk droid tools, click 'root, backup and recovery' tab.
12. Click 'To process file ROM_ from Flash Tool.
13. Locate the file you got from read back.
14. Say no to make CWM recovery automatically and cancel to choose a recovery for similar phone.
15. Now wait again.
Once done, you will get your sp flashable backup in MTK Driod Tools/backup.
Read back complete.
Now follow this guide to root your Unite 2.[/
What do you mean by green circle? I can't see except that stop button, which is already green.
Click to expand...
Click to collapse

Green circle
Zao, it worked for me after putting in the battery. The flash_tools hanged for a minute then automatically started backing up.
Regards,
Abhishek

MTK specific apps
Hi,
Can you confirm if the rom is 4.4.2.
If it is 4.4.2 ROM, then can you please extract and provide the mtk specific apks from /system/app,
ie;
EngineerMode,
EngineerCode
EngineerModeSIM
Mkt_boot
MTKAndroidSuiteDeamon
MTkBT
MTKLogger
MTKThermalManager
YGPS
Thanks in advance.
Or can you provide me the link to download KitKat rom

Sudeep Duhoon said:
Procedure:
1. Download and install drivers Driver_Auto_Installer_v1.1236.00.7z.
If not working try these too PDAnet_4150.rar.
Problem in installation?? Go here
2. Download scatter from here .
3. Open SP flash tools, load scatter in sp flash tools and go to read back tab. (alternative download link of sp flash tools)
4. Click 'Add' and tap on added read back entry.
5. Select any path to save file and click ok, write 0x3E180000 in length and click ok.
6. Click on read back and connect phone without battery. Wait till it completes.
7. Once you see a green circle, close sp flash tools and switch on the phone.
8. When the phone is on, connect it to pc. See if any notification of 'usb debugging' comes in phone, if not, go to settings->about phone->and tap build number 7 times to enable debugging options.
9. Go back and enter developers options(in settings), and check usb debugging on.
10. Now run mtk driod tools and it will detect phone. (alternative download link of mtk droid tools)
11. In mtk droid tools, click 'root, backup and recovery' tab.
12. Click 'To process file ROM_ from Flash Tool.
13. Locate the file you got from read back.
14. Say no to make CWM recovery automatically and cancel to choose a recovery for similar phone.
15. Now wait again.
Once done, you will get your sp flashable backup in MTK Driod Tools/backup.
Read back complete.
Now follow this guide to root your Unite 2.
Click to expand...
Click to collapse
i am facing some problem with preloader.....please guide me through.........

kanishka singh said:
i am facing some problem with preloader.....please guide me through.........
Click to expand...
Click to collapse
What problem? Explain a bit.
eagledipesh said:
Hi,
Can you confirm if the rom is 4.4.2.
If it is 4.4.2 ROM, then can you please extract and provide the mtk specific apks from /system/app,
ie;
EngineerMode,
EngineerCode
EngineerModeSIM
Mkt_boot
MTKAndroidSuiteDeamon
MTkBT
MTKLogger
MTKThermalManager
YGPS
Thanks in advance.
Or can you provide me the link to download KitKat rom
Click to expand...
Click to collapse
Here is the stock rom. Yes it is kitkat.
http://support.moulnisky.com/index.php?dir=Micromax/
zao.remy said:
Sudeep Duhoon said:
Procedure:
1. Download and install drivers Driver_Auto_Installer_v1.1236.00.7z.
If not working try these too PDAnet_4150.rar.........................Once done, you will get your sp flashable backup in MTK Driod Tools/backup.
Read back complete.
Now follow this guide to root your Unite 2.[/
What do you mean by green circle? I can't see except that stop button, which is already green.
Click to expand...
Click to collapse
A pop up will come when it will finish. On center of the sp flash tools.
codergenius said:
anyone using win 7 pro 64 bit : able to install vcom drivers & successfully rooted unite 2 (i am unable to readback using sp flash tools...getting error as "USBSetting::SearchUSBPortPool(): Scaning USB port failed!(..\QT_FlashTool_Refactor\Conn\USBSetting.cpp,195)" in QT_FLASH_TOOL.log and error "IsValidCOMPort(): Instance ID(USB\VID_8086&PID_0189\6&1279F1F3&0&5) (FlashToolLib/host/windows/com_enum.cpp:942)" in BROM_DLL_V5.log while read back, i am not sure if it is driver issue as preloader driver gets successfully installed
Click to expand...
Click to collapse
Try using usb deview to uninstall and reinstall the drivers or try changing the com port from sp flash tools itself or try any other pc.
Click to expand...
Click to collapse

i did it before rooting my phone...the process still remains the same...????

bladehunter said:
i did it before rooting my phone...the process still remains the same...????
Click to expand...
Click to collapse
Yes

Sudeep Duhoon said:
Procedure:
1. Download and install drivers Driver_Auto_Installer_v1.1236.00.7z.
If not working try these too PDAnet_4150.rar.
Problem in installation?? Go here
2. Download scatter from here .
3. Open SP flash tools, load scatter in sp flash tools and go to read back tab. (alternative download link of sp flash tools)
4. Click 'Add' and tap on added read back entry.
5. Select any path to save file and click ok, write 0x3E180000 in length and click ok.
6. Click on read back and connect phone without battery. Wait till it completes.
7. Once you see a green circle, close sp flash tools and switch on the phone.
8. When the phone is on, connect it to pc. See if any notification of 'usb debugging' comes in phone, if not, go to settings->about phone->and tap build number 7 times to enable debugging options.
9. Go back and enter developers options(in settings), and check usb debugging on.
10. Now run mtk driod tools and it will detect phone. (alternative download link of mtk droid tools)
11. In mtk droid tools, click 'root, backup and recovery' tab.
12. Click 'To process file ROM_ from Flash Tool.
13. Locate the file you got from read back.
14. Say no to make CWM recovery automatically and cancel to choose a recovery for similar phone.
15. Now wait again.
Once done, you will get your sp flashable backup in MTK Driod Tools/backup.
Read back complete.
Now follow this guide to root your Unite 2.
Click to expand...
Click to collapse
I cannot do this.. there is an error after 13% of the process completion.. Asking me to Press CTRL+ALT+T, What should i do.. is this step necessary to do if i only want to Root this phone and Perform Data REpartition.. Please Help me iam new to this Process

saikiransama said:
I cannot do this.. there is an error after 13% of the process completion.. Asking me to Press CTRL+ALT+T, What should i do.. is this step necessary to do if i only want to Root this phone and Perform Data REpartition.. Please Help me iam new to this Process
Click to expand...
Click to collapse
Not necessary, but highly recommend.

wat will be the approx size of the read back file ?

Scaning USB port failed!
Hi OP, plz help me out
M not able to readback following only this guide, getting the below error in logs:
"07/12/2014 19:40:39.305 FlashTool[8032][5132][D]: APCore::ConnMediaUSB:reConnect(): Scanning USB port...(..\QT_FlashTool_Refactor\Conn\ConnMedia.cpp,53)
07/12/2014 19:40:59.801 FlashTool[8032][8372][D]: FileUtils::CheckDirectory(): FileUtils::CheckDirectory(): the dir(C:\ProgramData\SP_FT_Logs) already exists.(..\QT_FlashTool_Refactor\Utility\FileUtils.cpp,44)
07/12/2014 19:41:09.407 FlashTool[8032][5132][D]: USBSetting::SearchUSBPortPool(): Scaning USB port failed!(..\QT_FlashTool_Refactor\Conn\USBSetting.cpp,195)"
can U plz let me know what possibly can be the reason for this error?

MTK droid tools 253 is not identifying the UNite 2 8GB model. What went wrong?
SOLVED - HAD TO WAIT FOR AROUND A MINUTE FOR THE FIRST TIME.

Problem with 8GB version
When I connect my phone to the computer, the preloader driver is installed and there's the typical connection sound in windows. But just after that it gets disconnected in like 1-2 secs. I am unable to use MTK Flash Tool because of it.
I have a 8GB rom version of unite 2. Anybody else having the same problem?? Any solutions???
PS: My phone is perfectly getting detected by adb in developer mode.

Rooted succesfully with u r method
Followed u r all step for Readback and Rooting Got success thanks for u r hard work
I have 4 Gb Version :good:

Sakthihari said:
wat will be the approx size of the read back file ?
Click to expand...
Click to collapse
512kb or 512b, i don't remember if that was in kb or b.
akash.gpta said:
When I connect my phone to the computer, the preloader driver is installed and there's the typical connection sound in windows. But just after that it gets disconnected in like 1-2 secs. I am unable to use MTK Flash Tool because of it.
I have a 8GB rom version of unite 2. Anybody else having the same problem?? Any solutions???
PS: My phone is perfectly getting detected by adb in developer mode.
Click to expand...
Click to collapse
Click download and then connect the phone, it will not get removed.
Niraj251 said:
Followed u r all step for Readback and Rooting Got success thanks for u r hard work
I have 4 Gb Version :good:
Click to expand...
Click to collapse
Press thanx, don't say it.

bootloop after flashing A rom

CWM recovery, Backup (Read back+CWM) and Root Micromax Canvas HD+

CWM AND BACKUP
1. Download and install drivers Driver_Auto_Installer_v1.1236.00.7z.
If not working try these too PDAnet_4150.rar.
Problem in installation?? Go here
Or use the drivers i use:here (install legacy drivers, google)
2. Download scatter from attachments .
3. Open SP flash tools, load scatter in sp flash tools and go to read back tab.
4. Click 'Add' and tap on added read back entry.
5. Select any path to save file and click ok, write 0x03d80000 in length and click ok.
6. Click on read back and connect phone without battery. Wait till it completes.
7. Once you see a green circle, close sp flash tools and switch on the phone.
8. When the phone is on, connect it to pc. See if any notification of 'usb debugging' comes in phone, if not, go to settings->about phone->and tap build number 7 times to enable debugging options.
9. Go back and enter developers options(in settings), and check usb debugging on.
10. Now run mtk driod tools and it will detect phone.
11. In mtk droid tools, click 'root, backup and recovery' tab.
12. Click 'To process file ROM_ from Flash Tool.
13. Locate the file you got from read back.
14. Say yes to make CWM recovery automatically.
15. Now wait again.
Once done, you will get your sp flashable backup in MTK Driod Tools/backup.
Read back complete.
FLASHING CWM AND ROOT:
1. Start SP flash tools and click on 'recovery' in sp flash tools and select the CWM recovery made by mtk droid tools (Micromax-A190_xxxx_recovery_) .
2. Click Download in sp flash tools, remove the battery from phone and connect it to pc.
A green circle/download ok will confirm flashing.
3. Insert battery and reboot to recovery. Make a Backup.
4. Select install from sd card and select Unite_2_4.4.2_Proper root......zip and say yes to flash.
5. Reboot, Done.

Finally it happens.. I rooted my phone successfully, n it's confirmed working ☺☺hands down Bro.. U r the man.. Big big cheers for the dev to make it happen.. Thanks a million times bro.. Another fabulous work for us.. God bless u ???

please reply that doing read back is important whats that

Vishesh said:
Finally it happens.. I rooted my phone successfully, n it's confirmed working ☺☺hands down Bro.. U r the man.. Big big cheers for the dev to make it happen.. Thanks a million times bro.. Another fabulous work for us.. God bless u ???
Click to expand...
Click to collapse
brother please help to install drivers iam not able to install drivers when iconnect my phone to pc wid no battery preloader usb vcom driver installation comes but then it says device unplugged Another thing, when I connect my A190 phone without battery, the device manager list updates itself every two seconds: once it shows the preloader vcom port and then in the next refresh there's no vcom port and this process repeats. Any idea why?

Can you please give Canvas HD Plus Stock Wallpapers.. Please...

somu12345 said:
brother please help to install drivers iam not able to install drivers when iconnect my phone to pc wid no battery preloader usb vcom driver installation comes but then it says device unplugged Another thing, when I connect my A190 phone without battery, the device manager list updates itself every two seconds: once it shows the preloader vcom port and then in the next refresh there's no vcom port and this process repeats. Any idea why?
Click to expand...
Click to collapse
that 2 seconds is what important ..
u hav to click tat vcom port and choose update driver with the one u downloaded

This is How i unbricked my Unite 2(4GB)

While trying some mods for Unite 2 , my phone got bricked, i must have done something wrong because those mods are working for others. so it was completely my mistake. so i spent my last 4 hours trying to find a solution and this is how i finally got it work.
JUST WANT TO REMIND YOU THAT TRY THIS GUIDE ON YOUR ON RISK, IM NOT GIVING YOU ANY GUARANTEE THAT IT WILL GOING UNBRICK YOUR DEVICE, IM JUST SHARING THE METHOD WHICH WORKED FOR ME
MY DEVICE
MICROMAX UNITE 2 4GB
KITKAT 4.4.2
following was the symptoms of my device only try this guide if yours are identical to mine
Phone was not booting up (nothing was happening no matter how long i press power button)
wasn't booting into to recovery mode also notification led was not turning on when plugged to PC (i.e No charging)
windows was making device plugged and unplugged sound over and over again when i was connecting it to pc using data cable
now from the 3rd point i figured out that my phone was being detected by my pc but only for a brief moment
so after searching for a while i found out that it was a problem with the PRELOADER and device was trying load META mode(donAt have any clue what that is) so i needed to Install MTK65XX Preloader USB Vcom Drivers for SP Flash Tools.
this is how i did it
Step 1 :Firstly Download MTK USB VCOM Drivers from here
DOWNLOAD
the extract it
Step 2 : Now open Device Manager in your PC by right clicking on My Computer and then click on Manage.
Step 3 :Next go to Device Manager in that and click on your PC name and then click on Add legacy hardware, see below
Step 4 : Now in Add Hardware Wizard click on Next >> Install the Hardware that i manually select from a list (Advanced) >> Show All Devices >> Next >>Have a Disk >> Browse, Now select the inf file according to your OS and from where you extracted the downloaded drivers.
Step 5 : Now click on Next on the wizard to install the drivers and when promoted for security issue just click on install any anyway to finish the driver installation.
Step 6 : After installation finish restart your PC.
Source
now remove battery of your phone and then plug it to your pc using data cable While Holding Volume up button
the windows will recognize it and install drivers, now open device manager and if you find a device under Ports(Com&LPT) which has Mediatek, MTK, USB, VCOM,PRELOADER keywords in it then you are good to go
now download SP Flash Tool
Devhost l Mediafire
and Factory rom
Download
and then extract the Factory rom archive
Then flash Stock ROM by following these steps:
Step 1: Open SP flash tool and load the Scatter file of Stock ROM it is inside the extracted factory rom folder
Step 2: Select Format all+Download in drop-down menu.
Step 3:Remove the battery of your phone.
Step 4:Click Download in SP Flash Tool.
Step 5:connect your phone to pc via USB cable while holding volume up button you can release volume button when the process is stared . Wait for flashing to complete .
Step 6: when the process is completed unplug the phone, insert the battery and then turn it one hopefully it should boot now and you should see Micromax logo just remember first boot take long time so just wait for it to completely boot
if this doesn't work then don't loose hope keep on searching for other ways ,

Nice one.... Will be helpful for some